"connection to host unexpectedly lost"

what does this mean and how do i fix it? i created an AIM account, and this is what happens when i try to log on to ichat using AIM...please help?

i'm really not an expert with iChat or Macs in general but that same thing was happening to me. all i did is i opened ichat and then up at the top i clicked on iChat>Preferences>Accounts>Server Settings. under "server settings" it should list the server and port. i think the default port is 5190. i just typed in 443 as the new port # and it worked fine. now you can't change it while AIM is running. so you'll have to click offline and then change it. i hope that makes sense. hopefully it'll work.

Similar Messages

  • AIM - connection with host unexpectedly lost

    When I am using my school's wireless internet, I can log onto iChat for about a minute, and then it logs off and says "Lost Connection with AIM. The connection with the host was unexpectedly lost."
    If I stay on the iChat window it stays logged on, but if I bring another application to the front of the screen it eventually logs off.
    I also cannot use video chat.
    I found a similar thread that said to use port 443, which I am currently using.
    It does the same thing even if I am logged in to my .mac account. However, Adium works and everything works fine when I am at home or somewhere else. As far as I know, my proxy information for my school's wireless is correctly entered in.

    Hi,
    Welcome to the  Discussion Pages
    iChat is very sensitive to Proxies.
    In fact I would say it does not like them at all based on the posts in these forums. Many people report they can not get it to work with a proxy whether it is listed in the iChat > Preferences > Accounts > Server Settings or in the System Preferences > Network.
    I don not use Proxies and still find at some points iChat does not seem to be able to stay logged in.
    I never use another client long enough to provide a comparison.
    iChat gets constant feedback from the AIM servers to keep the Buddy List updated. More so than a Minute check setting by Mail - so I can not see it is any time-out limit on the proxy.
    Isn't iChat using port 1080 for the Proxy ? (or whatever your Proxy uses )
    10:49 PM Wednesday; April 2, 2008

  • Connection to AIM unexpectedly lost

    Very often when I am not using iChat, my buddy list will all of a sudden switch to "Disconnected" and I will get a message saying "The connection to the host was unexpectedly lost." iChat used to work just fine! What can I do to get it back to the way it was?

     How to get iChat AV working again

  • "The connection to the host was unexpectedly lost"

    Occasionally when I try to log in to my AIM account, I get the message, "The connection to the host was unexpectedly lost." This happens randomly and if I keep pushing it, sometimes it will let me on. It seems to be entirely at the will of the computer.

    Try the Combo Update to get to 10.4.11
    PCC computer use this http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
    Intel ones use this http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
    9:16 PM Wednesday; March 31, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • The connection to the host was unexpectedly lost. AIM

    I am trying to connect to AIM via iChat in Mac OS X Tiger. Everytime I try to connect it shows my buddy list for about 1-2 seconds and then says, "The connection to the host was unexpectedly lost." I don't have aim connected on this computer or any other computer on the network when I try. Any help or recommendations are appreciated.
    Thanks

    124333.047765 Loading hardware rules from hardwarerulesH264-G4.plist
    124333.047851 Checking H264 hardware rules
    124333.047889 Satisfied rule #1 (20:640x480)
    124333.048134 setLocalUserName: myname@myip
    124333.174734 Default video size is (640x480)
    124333.318247 ### NEW STATE: to: VC_INIT, from: VC_INVALID
    124333.319157 ### NEW STATE: to: VC_IDLE, from: VC_INIT
    124333.319198 ++++++++ confStatusMapRemoveAll
    124333.319238 ( ) -- mapUserIDToSecurityInfo cleared --
    124333.319423 UPnP init passed
    124333.319569 NATTraversal created
    124333.319697 QT automatic setting = 16777216
    124333.319708 Bandwidth based on QT prefs = 0
    124333.382414 UPnP Router Info:
    - manufacturer [NETGEAR, Inc.]
    - friendly name [Residential Gateway]
    - model name [RangeMax(TM) Wireless Router]
    - model desc [RangeMax(TM) Wireless Router]
    124333.382654 UPnP: Begin TCPProc
    124335.591339 BWD: cache: '[myip:255.255.255.0]' != '[myip:255.255.255.0]'
    124335.591361 BWD: Launching thread to determine focus capability based on bandwidth.
    124335.591509 QT automatic setting = 16777216
    124335.591541 BWD: Using QuickTime value: 0
    124335.591569 BWD bandwidth: 0 kbits up, 0 kbits down.
    124335.591595 videoNetworkCapable: 0 -- 0 max participants.
    124335.591628 audioNetworkCapable: 0 -- 0 max participants.
    124335.591710 vcCapabilities returns: 0x00000007
    124335.591738 VCCapAudio
    124335.591838 VCCapVideo
    124335.591912 VCCapMultiAudio
    124335.830696 BWD Configuration Data: bwdstart://snatmap.mac.com:16384
    bwdcount:1
    (16384/1)
    124335.830753 Connect to bwd server:16384/1 from configuration file.
    124335.840447 Found 1 cameras:
    124335.840516 Built-in iSight - -46137344
    124335.842033 selectCameraByGUID: -46137344 returned 1
    124335.847738 BWD_GetBandwidth: SendRequest (from :16392)
    124335.882925 BWD_GetBandwidth: GotResponse
    124335.898912 Microphone devices:
    124335.899039 Internal microphone
    124335.899114 Line In
    124335.899175 selectedCamera GUID returned Built-in iSight
    124335.913958 selectedCamera GUID returned Built-in iSight
    124335.914034 Selected mic: Built-in Mic / imic
    124335.914177 Found 1 cameras:
    124335.914210 Built-in iSight - -46137344
    124335.914256 selectedCamera GUID returned Built-in iSight
    124335.916223 Microphone devices:
    124335.916299 Internal microphone
    124335.916369 Line In
    124335.916407 selectedCamera GUID returned Built-in iSight
    124335.916457 selectedCamera GUID returned Built-in iSight
    124335.916503 Selected mic: Built-in Mic / imic
    124335.916584 Found 1 cameras:
    124335.916601 Built-in iSight - -46137344
    124335.916639 selectedCamera GUID returned Built-in iSight
    124335.918550 Microphone devices:
    124335.918625 Internal microphone
    124335.918712 Line In
    124335.918746 selectedCamera GUID returned Built-in iSight
    124335.918795 selectedCamera GUID returned Built-in iSight
    124335.918856 Selected mic: Built-in Mic / imic
    124336.650053 BWD cache: saving [myip:255.255.255.0]:433131/[email protected]
    124336.651405 GotBandwidth: 433131/2532198 (up/down) @[myip:255.255.255.0]
    124336.652837 BWD bandwidth: 433 kbits up, 2532 kbits down.
    124336.652849 videoNetworkCapable: 1 -- 3 max participants.
    124336.652859 audioNetworkCapable: 1 -- 9 max participants.
    124336.652889 Focus Capability (after BWD):
    124336.652921 audioHardwareCapable = 1
    124336.652943 maxAudioParticipantsBasedOnHardware = 9
    124336.652967 audioNetworkCapable = 1
    124336.653029 maxAudioParticipants = 9
    124336.653060 canBeAudioMultipointParticipant = 1
    124336.653088 videoHardwareCapable = 1
    124336.653119 maxVideoParticipantsBasedOnHardware = 3
    124336.653147 videoNetworkCapable = 1
    124336.653177 maxVideoParticipants = 3
    124336.653205 canBeVideoMultipointParticipant = 1
    124336.653236 detectedUpstreamKbits = 433
    124336.653264 detectedDownstreamKbits = 2532
    124336.653294 Sending VCCapabilitiesDidChangeNotification
    124336.653520 BWD: GotBandwidth: 433131/2532198 (up/down) @[myip:255.255.255.0]
    124336.653535 BWD bandwidth: 433 kbits up, 2532 kbits down.
    124336.653543 videoNetworkCapable: 1 -- 3 max participants.
    124336.653564 audioNetworkCapable: 1 -- 9 max participants.
    124336.653628 vcCapabilities returns: 0x0000003f
    124336.653651 VCCapAudio
    124336.653698 VCCapVideo
    124336.653720 VCCapMultiAudio
    124336.653765 VCCapMultiVideo
    124336.653795 VCCapMultiAudioHost
    124336.653823 VCCapMultiVideoHost
    124336.654917 BWD: Launched thread done.
    124336.655078 Found 1 cameras:
    124336.655123 Built-in iSight - -46137344
    124336.655171 selectedCamera GUID returned Built-in iSight
    124336.657146 Microphone devices:
    124336.657220 Internal microphone
    124336.657309 Line In
    124336.657346 selectedCamera GUID returned Built-in iSight
    124336.657396 selectedCamera GUID returned Built-in iSight
    124336.657452 Selected mic: Built-in Mic / imic
    124336.672544 Found 1 cameras:
    124336.672585 Built-in iSight - -46137344
    124336.672634 selectedCamera GUID returned Built-in iSight
    124336.674617 Microphone devices:
    124336.674691 Internal microphone
    124336.674783 Line In
    124336.674822 selectedCamera GUID returned Built-in iSight
    124336.674871 selectedCamera GUID returned Built-in iSight
    124336.674930 Selected mic: Built-in Mic / imic
    124336.675028 Found 1 cameras:
    124336.675045 Built-in iSight - -46137344
    124336.675095 selectedCamera GUID returned Built-in iSight
    124336.677030 Microphone devices:
    124336.677205 Internal microphone
    124336.677354 Line In
    124336.677459 selectedCamera GUID returned Built-in iSight
    124336.677563 selectedCamera GUID returned Built-in iSight
    124336.677665 Selected mic: Built-in Mic / imic

  • "The connection to the host was unexpectedly lost" Cannot log into AIM

    Every time I try to log into ichat, using AIM service I get this message...
    The connection to the host was unexpectedly lost.
    However, I can log onto ichat on my other mac. (macbook) And I can access AIM from AIM program on my windows computer....
    Everything in preferences is configured right...Can anyone shed some light onto this?
    thanks,
    Joel

    I have this problem, using ichat only (not using aim directly) and posted before in another thread with essentially the same name as this one. I tried all the solutions offered and none worked. BUT I did "solve" my problem. Here's how:
    Solution number 1) I connected my macbook via an ethernet connection directly to my cable modem. No other changes at all, no further problems, was able to use ALL features of ichat immediately and quite well (audio and video).
    Solution number 2) Since we have several computers at home, we must use a wireless router, a Netgear router. If I connect to the router (which then connects to the cable modem), ichat does not work, and I get the exact message as in this subject line. Going to the Netgear router settings (changing nothing on my macbook), I changed ONE thing only: I disabled the SPI firewall. Then, no problem using ichat to chat, but I still can't use audio or video features.
    Hope this helps. For me, it diagnosed the problem with using basic ichat: the SPI firewall on the router. Also, the audio/video problem is a router problem too, which I do not yet know how to fix.
    Since I am timid and fearful, I do not want to leave the SPI firewall permanently disabled.

  • Connection to the host was unexpectedly lost.

    I'm still having problems connecting to AIM using iChat. I switched to port 443, and I still get the message that the connection to the host was unexpectedly lost.

    Ok,
    Do you have individual wall sockets ?
    Do you have a router in the room ?
    IS your Wireless card set up for Interference Robustness ?
    How are the ports opened in the modem ?
    UPnP for two computers ?
    7:45 PM Monday; September 10, 2007

  • What does this mean?? "The connection to the host was unexpectedly lost."

    i get this 95% of the time i try to login:
    The connection to the host was unexpectedly lost.
    it then closes
    i go thru AIM
    _*someone please help*_
    Message was edited by: migueliguel
    Message was edited by: migueliguel

    Hi
    Try logging on to AIM on port 443 rather than port 5190.
    Go to IChat in the menu bar > Preferences > Accounts.
    Log out of AIM and then use the Server Settings tab
    Set the port to 443.
    Log back in again.
    Tony

  • Constantly get "The connection to the host was unexpectedly lost."

    When I try to use IChat at home on my PowerBook I get "The connection to the host was unexpectedly lost." as soon as I try to connect. This does not happen at work though. It works fine at work.
    I thought it might have something to do with the different ISP's or Router settings on my Netgear wirless router. (At home I connect via ethernet cable.) However it WILL work at home about 5% of the time.
    ANy Ideas to troubleshoot?

    Hi Scuba Dan,
    Check that Systrem Preferences > Quicktime > Streaming tab has the drop set to your Download speed.
    http://www.ralphjohnsuk.dsl.pipex.com/page4.html#_quicktime
    Also check iChat > Preferences > Video Section Bandwidth drop down is set to NONE.
    http://www.ralphjohnsuk.dsl.pipex.com/page4.html#_bandwidth
    These two will cap iChat if not set properly.
    As Defcom says if these settings are correct you may have a modem that is having trouble wiith forwarding port 5190 on both TCP and UDP protocols.
    Changing the setting he mentions drops the login below any Port Forwarding and NAT involvement on your modem and router.
    Having said that avoiding NAT and Port forwarding by using UPnP is another way around this. Most Netgears have UPnP enabled as default. You don't need Port Forwarding ANd UPnP. Disable the Port Forwarding settings by Unchecking them.
    For others,
    Zyxel devices are prone to needing port 443, as are newer devices that want protocols to be set when Port Forwarding.
    10:56 PM Tuesday; October 17, 2006

  • Netgear + "The connection to the host was unexpectedly lost"

    I have an 802.11g Netgear router. I just got it, previously I had the exact same router, but 1 "version" behind.. aka it was gray and this one is white, but everything else SEEMS identical.
    Everytime I try to connect to iChat now, I get the message:
    "Lost connection with AIM
    The connection to the host was unexpectedly lost."
    My buddy list starts to come up, that message appears, the buddy list closes, and I'm screwed.
    I am set to the DMZ. I am using port 5190, but 5191 and other ports work.. but I cannot use audio or video chatting. My client shows up as "not capable" of audio or video (MBP so I'm capable of both, and did both before this new router).
    Help is appreciated, and I will gladly hand out cookies to anyone who can help.

    Hi
    Try this log on to AIM on port 443 rather than port 5190.
    Go to IChat > Preferences > Accounts.
    Log out of AIM and then use the Server Settings tab
    Set the port to 443.
    Log back in again.
    Tony

  • IChat: "The connection to the host was unexpectedly lost"

    I have I will be talking to people on iChat and will not recieve responses from anyone for a while then suddenly i am kicked off and the error message "The connection to the host was unexpectedly lost" appears. I will log back on and the people whom I was talking to say they were sending me messages and they didnt get any of the messages i had sent.
    Thank YoU!!!

    Hi Samantha,
    Have answered here.
    3:50 PM Wednesday; March 1, 2006

  • Every time I try to sign on it says that ichat lost the connection to the AIM account and the server connection was unexpectedly lost.  How can I fix this?

    Every time I try to sign on it says that ichat lost the connection to the AIM account and the server connection was unexpectedly lost.  How can I fix this?

    Note For others.
    For the Port Changes (or server names in some cases) you have to be logged out to make changes on the Server Settings pane.
    9:41 PM      Friday; October 28, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Underlying connection was closed unexpected error on send...

    I am creating the auto hosted app for office 365.few days back it was working fine.Since few days back i am raninto one issue i.e "underlying connection was closed unexpected error on send".I tried in my local office 365 and trial version of
    office365 also, it is working in both the places.Please provide the solution for this issue...Thanks in Advance....

    It is a generic error message, 
    Can you pleas share details from ULS log and Event logs for analysis.
    If this helped you resolve your issue, please mark it Answered

  • Connection to host as user oracle9i failed

    Examine and correct the following errors, then retry the operation:
    Error - Connection to host as user oracle9i failed: Received unexpected response text : <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <HTML><HEAD> <meta http-equiv="Content-Type" content="text/html; charset=windows-1251"> <TITLE>������: ��������� ����� �� ���� �� ���� ��������</TITLE> <STYLE type="text/css"><!--BODY{background-color:#ffffff;font-family:verdana,sans-serif}PRE{font-family:sans-serif}--></STYLE> </HEAD><BODY> <H1>������</H1> <H2> ��������� ����� �� ���� �� ���� �������� </H2> <HR noshade size="1px"> <P> ��� ���� �� ���� �������� �������: http://rx4640:1830/emd/main? <P> �������� �������� ������: <BLOCKQUOTE> �� ���� �� ���� ������� IP ������� �� ������� <I>rx4640</I> </BLOCKQUOTE> <UL> <LI> <P> �������� �� ����� ���� �������� ���������: <BLOCKQUOTE> Name Error: The domain name does not exist. </BLOCKQUOTE> </UL> <P> ���� ��������, ��: <PRE> ��� �������� �� � � ��������� �� �������� ������ �� �������, ������� � ���� �� ������� �����. ��������� ���� ����� �� ������� ����� � �

    user5616408 wrote:
    1.Which domain - db domain or network domain.
    2.How to correct the error?It would seem that you are supplying a URL - this then returns an HTML error response. This response says "+domain name does not exist+".
    As you provide no info on how you are making this HTTP call, and the fact that you are not getting a HTTP response code error, but a response page... the assumption is:
    a) you are reaching the web server as specified in the URL
    b) the web server is returning the error page
    c) the error related to the web server not being satisfied with the data supplied (or obtained) via that HTTP command it received - for example the query string may fail validation (hostname without a domain name), the command itself may not have a valid referring domain, etc.
    Also as the error response include "+http://rx4640:1830/emd/main?+" (one of the few text strings that are readable on my browser from that error response you have posted), it would seem that the web server expects fully qualified hostnames. I.e. hostnames need to include a domain name. And this URL refers to host "+rx4640+" and does not include a domain qualifier.

  • Connection to host (ip adress), service timed out

    Hi ,
    I am getting the below error in dev_server0 while deploying the SAPJTECHS.SCA file in SDM.
    [Thr 267] *  ERROR       connection to host 192.168.1.15, service sapgw11 timed out
    [Thr 267] *
    TIME        Mon Jan 24 10:51:24 2011
    [Thr 267] *  RELEASE     640
    [Thr 267] *  COMPONENT   NI (network interface)
    [Thr 267] *  VERSION     37
    [Thr 267] *  RC          -12
    [Thr 267] *  MODULE      nixxi_r_mt.cpp
    [Thr 267] *  LINE        1109
    [Thr 267] *  DETAIL      NiPConnect
    [Thr 267] *  COUNTER     11
    [Thr 267] *
    [Thr 267] *****************************************************************************
    Kindly suggest.
    regards,
    Mahesh.N.R

    And below is the error in SDM log.
    Jan 24, 2011 10:40:10... Info: End of log messages of the target system.
    Jan 24, 2011 10:40:10... Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    Jan 24, 2011 10:40:10... Error: Aborted: development component 'com.sap.engine.docs.examples'/'sap.com'/'SAP AG'/'6.4025.00.0000.20091105122001.0000'/'27', grouped by software component 'SAP_JTECHS'/'sap.com'/'SAP AG'/'1000.6.40.25.0.20091119165445''/'27':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.engine.docs.examples..
    Reason: Cannot extract WAR file [temp_default.war] of application [sap.com/com.sap.engine.docs.examples].; nested exception is:
         com.sap.engine.services.deploy.container.DeploymentException: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='com.sap.engine.services.servlets_jsp.server.exceptions.WebDeploymentException: Cannot extract WAR file [temp_default.war] of application [sap.com/com.sap.engine.docs.examples].
         at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:120)
         at com.sap.engine.services.servlets_jsp.server.container.DeployAction.deploy(DeployAction.java:124)
         at com.sap.engine.services.servlets_jsp.server.container.WebContainer.deploy(WebContainer.java:153)
         at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
         at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
         at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3187)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
         at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.sap.engine.services.servlets_jsp.server.exceptions.WebFileNotFoundException: Possible reason: file name is too long.
         at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:795)
         at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:113)
         ... 19 more
    Caused by: java.io.FileNotFoundException: /usr/sap/PQA/JC50/j2ee/cluster/server1/apps/sap.com/com.sap.engine.docs.examples/servlet_jsp/_default/root/apidocs/allclasses-frame.html (Permission denied)
         at java.io.FileOutputStream.open(Native Method)
         at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
         at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
         at com.sap.engine.lib.io.FileUtils.writeToFile(FileUtils.java:159)
         at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:784)
         ... 20 more
    ', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.engine.services.servlets_jsp.server.exceptions.WebDeploymentException: Cannot extract WAR file [temp_default.war] of application [sap.com/com.sap.engine.docs.examples].
         at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:120)
         at com.sap.engine.services.servlets_jsp.server.container.DeployAction.deploy(DeployAction.java:124)
         at com.sap.engine.services.servlets_jsp.server.container.WebContainer.deploy(WebContainer.java:153)
         at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
         at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
         at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3187)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
         at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.sap.engine.services.servlets_jsp.server.exceptions.WebFileNotFoundException: Possible reason: file name is too long.
         at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:795)
         at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:113)
         ... 19 more
    Caused by: java.io.FileNotFoundException: /usr/sap/PQA/JC50/j2ee/cluster/server1/apps/sap.com/com.sap.engine.docs.examples/servlet_jsp/_default/root/apidocs/allclasses-frame.html (Permission denied)
         at java.io.FileOutputStream.open(Native Method)
         at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
         at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
         at com.sap.engine.lib.io.FileUtils.writeToFile(FileUtils.java:159)
         at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:784)
         ... 20 more

Maybe you are looking for

  • DB  Adapter Calling DB Procedure that returns a Record Type

    I am trying to call a PL/SQL procedure that returns a Record Type and a VARCHAR2 and I'm getting this error: <Faulthttp://schemas.xmlsoap.org/soap/envelope/> <faultcode>env:Server</faultcode> <faultstring>java.sql.SQLException: ORA-06550: line 1, col

  • How to attache the error File ?

    Hi All !!! I want to attach the screen shot of error file in this forum? Can i do that ? If we are going attach the screen shots we can be easily understand the issue....am i right ? I dont know whethere that option availble in this forum or not ? Pl

  • Can one logical table had bothfragmented and non-fragmented table sources?

    Hi, I created one logical table with three logical table sources as explained below. 1. Inventory Item logical table source with fragmentation clause of ITEM_TYPE='INVENTORY', I checked source combination feature for this LTS. 1. Punch out logical ta

  • Miliseconds in the trace files

    I'm using the tkprof tool to analyze a procedure, but in the time columns there appear only 0.00. Is there a way to obtain milliseconds instead of 'centiseconds' in the trace files?

  • Audit management - question list

    Dear SAPIENTS,       Does anyone have a document that helps us to record the replies for a question/ questions. Whether the questions, should be set as to give a yes or no answer.       How and where to record the replies for the questions, bcoz afte