Connection to Internet After Software Update

I updated my mac computer with a software update today, I restarted it, and now it will not connect to the internet or check for more updates. Please help!

Click the Wifi logo at the top of the screen and forget network and start again.

Similar Messages

Cannot connect to internet after software update

I have an old powerbook G4 running Mac OS X 10.3.9 (this is one of 3 macs) I also have an airport Extreme and an airport Express to make a network in my home. Frequently, after a software update to the old computer, it has trouble getting back on to the internet. Usually, adjusting access to the Keychain fixes this.
Now, after a software update last week--I cannot get on the internet with this computer at all. The computer is connected to the network, the password is in the keychain, the signal is strong (all of the other computers can get on to the network)--but whenever I try to get on, I get 'cannot connect to the server'.
(btw, Last evening, the issue resolved itself for about 3 hours--I don't know why--but today it is out again.) Can anyone help?

Hi, Rathh. Always use Disk Utility to repair permissions immediately after installing any software update that uses Apple's Installer application, or that is installed by the Software Update function accessed through the Apple Menu.

HT4623 My iPad is not connecting to internet after software update what can i do

Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
what to do to correct this issue? Please

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords.

Safari not connecting to internet after software update

I have just completed a software update and now safari will not connect to our wireless internet... airport says it has full bandwidth and other macs connected to the wireless connection are working without any fault.... has anyone got any ideas????
Thanks!!

Hello Sarah:
As you probably have already guessed, quite a number of things might have happened.
My network is Ethernet, so I am not much help with wireless networks. However, I think I would (if I were you), run an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
An archive and install will place a fresh copy of OS X on your system while, at the same time, preserve your files, programs, and settings. It is always a good idea, however, to have a good backup strategy before any software changes. You should then run software update to bring your system to a current level (in your case, OS X 10.4.11 is current, I think).
The A&I should eliminate any system software issues.
Barry

Can't connect to internet after software update to iBook G4

I recently installed updates to itunes, quicktime, and the the latest security update for os x 10.3.9 on my iBook G4. Now I can't connect to the internet via my airport express. This happened the last time I updated the software, but I can't remember what I did to fix it. Can anyone help?

I am experiencing the exact same problem with my sister's laptop. iBook G4 10.3.9 I just installed Security update 2007-008 and quicktime update. After the reboot her airport connected to the house router, but will not acquire an IP address. The other computers in the house have remained connected to the router without change. I have a another iBook G4 running on 10.4.11 with the same network settings and I have no trouble whatsoever. I re-enetered the WAP password, reorganized the network connection priorities and repaired permissions, but cannot get the computer to acquire an IP address.
Any ideas??

Can't connect to internet after software update

I just downloaded todays (3-1-2006) security update from apple. Once I rebooted my ibook I wasn't able to connect to the internet anymore. Any ideas why?
My internet connect is still good as I am typing this on my wifes ibook just fine.
thanks

Mike,
Check my post on the "Customization" thread in reply to "Onthegomike." I experienced a similar problem with my desktop and was able to resolve it. I have not yet downloaded the Security Update to my laptop; however, I'm sure I'll have to go through hoops again once I do that. Repairing permissions before and after sometimes helps, however, I often have to go through the disconnection of my airport express before I'm up and running on the iBook.
eMac, iBook Mac OS X (10.3.9) 1 Ghz G4, 768 mb ram

Can't connect to internet after software updates to ibook g4

I recently installed updates to itunes, quicktime, and the the latest security update for os x 10.3.9 on my iBook G4. Now I can't connect to the internet via my airport express. This happened the last time I updated the software, but I can't remember what I did to fix it. Can anyone help?

You might have better luck posting in the OS X forum. This forum is for the iPhone.

HT5642 ipod won't connect to internet after software update

Help. I can't get my ipod to connect to my wifi since I downloaded the new update.

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Cant connect to internet after ios6 update

cant connect to internet after ios6 update

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I cannot connect to internet after I update system.

Hi,
I update my system a few day ago (use systemd to replace rc.d) and I cannot connect internet. I guess my router table is broken, but I cannot find any problem.
I use ping to try some IP. And I find I connect to local machine only.
Do I miss some configuration ?
[~]ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2000ms
[~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[ ~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
[ ~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
--- 172.27.13.254 ping statistics ---
41 packets transmitted, 0 received, 100% packet loss, time 40131ms

Hi,
I have 2 network interface.
The eth1 is for test only. It is connected to a 8 port LAN switch, and there are 2 NAS connected to this switch.
I use eth2 to connect to internet, for example, update system. I try to disable eth1, but it is still not work.
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
inet 10.10.12.50/24 brd 10.10.12.255 scope global eth1
inet6 fe80::2e0:81ff:fe27:3261/64 scope link
valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
inet 172.27.12.23/23 brd 172.27.13.255 scope global eth2
inet6 fe80::207:e9ff:fe01:a136/64 scope link
valid_lft forever preferred_lft forever
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:60 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
Last edited by guardkuo (2012-12-22 10:52:35)

Cannot connect to internet after softqare update

I have an old powerbook G4 running Mac OS X 10.3.9 (this is one of 3 macs) I also have an airport Extreme and an airport Express to make a network in my home. Frequently, after a software update to the old computer, it has trouble getting back on to the internet. Usually, adjusting access to the Keychain fixes this.
Now, after a software update last week--I cannot get on the internet with this computer at all. The computer is connected to the network, the password is in the keychain, the signal is strong (all of the other computers can get on to the network)--but whenever I try to get on, I get 'cannot connect to the server'.
(btw, Last evening, the issue resolved itself for about 3 hours--I don't know why--but today it is out again.) Can anyone help?

Hi Rathh!
You might want to repost your question in one of these PowerBook forums (pick which model of the G4 PowerBooks you have):
Internet, Networking and a PowerBook G4 17-inch
Internet, Networking and a PowerBook G4 15-inch Aluminum
Internet, Networking and a PowerBook G4 12-inch
Internet, Networking and a PowerBook G4 15-inch Titanium
-Kylene

E51 can't connect to internet after software upgra...

Few weeks ago I updated the firmware for the E51, it is now the latest: 200.34.36.
However after this update internet from phone stopped working. I can't use e-mail, browser or any other app that needs connection to the internet. It will not work over gprs, edge, hsdpa nor wifi. All it says is: connection failed, it will not even try to bring up packet data connection, with wifi it will connect to the network but apps can't use it.
However, while connecting with a laptop over bluetooth connection hsdpa data works perfectly.
Any tips?

Had the same problem after upgrading the phone and restoring the backup. Installed software disapeared or didnt work properly. When trying to connect to the WLAN it just said "connection not available" but the connected icon for WLAN was indicating it was online. When i tried to connect the second time i got this error: "wlan connection already active". So i did a hard reset by pressing * and 3 and green button while the phone is off, keep pressed, switch on the phone an wait for the PIN to enter. Violá now everything works perfectly.
Glad i dont rely on only one method of backing up my information. All i lost was some time reconfiguring the device.

Faulty internet after software-update

I have recently severe problems with Safari:
- freezing or endlessly spinning beachball
- some pages not loading
- often having to click twice to open a page
- very slow loading of video files or video files that stop loading.
Sometimes stopping the opening of the page and immediately reloading helps.
I have similar problems with Firefox and Camino.
Also SSH works badly.
Emptying the cache and disabling plugins didn't help.
I re-installed OS-X and the bundled software. Everything was fine then until I downloaded the updates. In order to be able to write to this forum I re-installed again without updating.
Our home-network seems fine since a Mac G4, a laptop with Linux and a desktop with Windows work flawlessly.

FWIW, I'm having the same kind of problems after an update, with Safari, Firefox, and Camino. All pages now seem to load EXTREMELY slowly, and lots of Safari beachballs. I've also tried switching ports on my router, with no luck.

Can't connect to internet after latest update

Help.... ipad won't connect to the internet despite having full signal and being connected to home broadband, i know its not the connection as both iphones and macbook work fine..... was ok till i updated the software, anyone suggest anything?

HI and welcome......
On your iPad...
Tap Settings / General / Reset / Reset Network Settings.
That resets to factory default. You may be prompted for your network password.
Hope that helps...
Carolyn

Connect to iTunes after software update

After doing an update to 7.03, it keeps saying "Connect to iTunes", i then restore it and it then fails. Any ideas? Thanks

ReBoot your phone & computer..
Check your internet connection..Logout then Reloggin to iTunes...

Connection to Internet After Software Update

Similar Messages

Maybe you are looking for