Connection to internet via ADSL with password login - using airport extreme

my connection to internet is via ADSL with account name and password login. i was able to set up the PPPoE settings of my new macbook properly to connect to the internet via an Ethernet cable. however, when i was trying to set up the airport extreme base station, the amber light was on all the time and has been giving me the error message "no connection to internet" - can someone pls help?
thanks
macbook Mac OS X (10.4.9) new to mac and airport extreme base station
macbook Mac OS X (10.4.9)

btam, Welcome to the discussion area!
The first thing to do is DISABLE PPPoE on your Mac. Since your AirPort Extreme base station (AEBS) will be handling PPPoE, your Mac doesn't need to do it.
Next configure the AEBS to connect to your ISP using PPPoE. You can see where to enter the PPPoE information by looking at Page 33 in the "Designing AirPort Networks" (http://manuals.info.apple.com/en/DesigningAirPortNetworks.pdf).

Similar Messages

How can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

how can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

Hi,
This is currently not supported by iOS for any devices. Rumour is that iOS 5 will finally add this function, until then I'm afraid you are stuck with the good old cable.
Jamie

Connect to Internet via Bluetooth with 6121 Classi...

I have a new Nokia 6121 Classic and a Thinkpad T60 with the latest Bluetooth drivers and Windows XP SP2.
I've installed the Nokia software and it asked to get the updated software from the Internet and installed 6.86.9.0
It connected fine via Bluetooth (WIDCOM) and I'm able to Sync my contacts/transfer files without any problems. I then throught I'd connect it to the Internet. I tried the cable connection and it connected fine via 3G to my carrier Optus.
However, if I don't use the USB cable and try via Bluetooth (what I want) it starts to connect and says 'Looking for bluetooth devices'...which is really strange since it's already connected !! Windows XP beeps quickly as if something has been plugged into a USB port, but nothing has. After about 20-30 secs, Windows XP beeps (as if something has been unplugged, but nothing has. The Nokia Connection Manager then says "No modem found!"
It's so strange...it can see the Nokia phone fine via Bluetooth. I then tried to connect via "My Bluetooth Places" and XP also connected fine to the phone. It then installed another dialup connection via Bluetooth. But if I click on that icon, it connects to the phone but then asks for a userid/password which I have no idea what to enter. So I think I need to use the Nokia PC suite, but it won't connect to the Internet via the phone, unless I use the USB cable.
It's a strange one... I've searched the forums but can't see any clues for my particular case.
Daz
PC Connectivity Solution:
Version 8.15.0.0
[Nokia Connectivity Cable Driver:]
Version 6.86.11.0
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 2
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 7.0 (Default browser)
- Mozilla Firefox 2.0
Detected Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 2180)
- Broadcomm (Version: 5.1.0, Build: 4700)

For anyone who's interested I solved this by:
- Edit the Phone number for the bluetooth Modem and entering *99#
- For the modem, setting it's Maximum speed to the highest. In my case it was 921600.
- Go into Control Panel - Phone and Modem Options - Modems - Select Bluetooth Modem - Properties - Advanced tab and enter at+cgdcont=1,”IP”,”internet”
Dial the connection by going into My Bluetooth Places and double clicking on the icon. When prompted enter a blank userid and password. It should then connect to the Internet via your mobile !
Daz

Airport Express: can't connect to internet via adsl modem

I have an old Airport Express which has worked fine in the past and a new ADSL internet account which works fine when I connect to it via PPoE Built-in-Ethernet. But despite following all the instructions in the Airport Setup Assistant I can't get Airport to work with the new modem (it works fine for AirTunes though). The thing is I don't really get how it could work with the new modem seeing as the Airport Setup Assistant doesn't ask me at any point what the username or password is for the new account.
I guess I'm missing something obvious here. Does anyone have any ideas what it is?

Thanks again, I tried that but it didn't work either. Going back to basics, it might help if I tried to set out what I'm trying to take in a bit more detail:
1. Having just moved house I have a new ADSL line and modem installed by the phone company and a new ISP that has provided me with a username and a password. Using those I have no trouble getting internet via an ethernet cable connecting my iBook and the Modem.
2. I plug the ethernet cable into my AX and then plug the AX into the wall.
3. Then I follow the AX set up assistant guide for setting up a new base station.
4. I click the box for DSL or Cable Modem. I don't click the box for Router
5. This is the step I'm most unsure about. Because it is the default option I click the box for DSL or Cable modem ... or over Ethernet with an IP address assigned automatically using DHCP." I do not tick "I do not use DHCP". But I don't really know what that means.
6. AX tells me that it is configured as follows: TCP/IP: using DHCP and IP Address: Provided automatically.
7. When I open Safari it tells me that I'm not connected to the internet. Clicking the network diagnistics box gives me green lights for everything up to and including ISP but not for the internet.
Someone here mentioned that I might have to reconfigure my modem as a router. Is there anything to that?
Thanks again for your help.

Connect a PC to My existing Wireless Network Using Airport Extreme

this is my issue i bought a Airport Express to connect a PC via ethernet to my wireless network already working at home. Cant figure out the settings???? need help. My home network is using a airport extreme base station. the problem is the PC doesn't have wireless capability so i connected the PC to the airport extreme in order to connect to the network, but no luck so far.

Hello Sailor25. Welcome to the Apple Discussions!
What you need to do is configure the AirPort Express Base Station (AX) as a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)

How to connect to a Wireless HP Printer WPS Pin using Airport Extreme

I cannot figure out how to connect my Wireless HP Printer that uses a WPS Pin to my netword that has a Airport Extreme router?

http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_task=setupCategory&cc =us&dlc=en&lc=en&product=5109847 may help you.

My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

I have a Mac connected to Internet via DSL modem. Just bought iPad (today). What hardware do I need to set up wireless LAN so iPad can be used anywhere in house? Will Linksys work with Apple?

I have a Mac connected to Internet via DSL modem. Just bought an iPad2 and need to know what hardware do I need to add wireless LAN so I can use iPad anywhere in the house. Will a Linksys router work with Apple? Can Mac be "hardwired" and iPad wireless? Probably stupid questions but I need to learn. Thanks.

Bob Timmons wrote:
Thanks for the info. You are correct. I was speaking in general terms here based on my experience with the two devices in day to day use, and not in terms of exact specifications.
A better choice would have been to say that the "coverage" is about the same with the edge going to the Extreme....due to the newer mutliple antenna design.
We sure could use more help on the forums. Hope that you will become a regular.
Hi Bob
RF is a minefield, but one that I have worked in for ages, the most critical factor in my experience is location, location, location!
Better routers have more intelligently designed antenna systems, output power as I said is the same, radiation pattern (coverage) is dependent on antennas and physical location more than all other factors.

My macbook pro cannot connect to internet via wifi

I have a Macbook Pro 2010 OS X 10.8.3. I cannot connect to internet via wifi (Air por). My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password. when I type in my password a dialog box gives me timeout error. Please could anyone help me. I am using ethernet for my connection at the moment. Do I need to reset my macbookpro? if yes, what will happen to my applications and operating system (mountain lion)?
Monireh

When you use the Airport utility what happens?
What is in the System Preferences control panel for Network settings?
http://www.apple.com/support/airport - there is a forum just for Airport Community
Airport Express FAQ
http://support.apple.com/kb/HT1515
Wi-Fi Setup Considerations
Things to consider before you begin
Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
When using Ethernet, Cat6 cable is recommended.
The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
You will need to consider what AirPort Utility settings to adopt.
You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
AirPort Discussions
Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
More
Direct you to the proper forum for MacBook :
MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forums
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Unable to connect to internet via the proxy - Proxy set up OEM 12c

Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )

Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

Macbook connectivity to internet via airport extreme is flakey

Hi,
Just bought a brand new airport extreme and I already own a June 2009 Mac book pro w/ snow leopard.
I always run software updater, so the Airport 2009-002 patch/fix is on this system.
I have a strange problem with my connectivity to the internet from my mac via the airport extreme.
Very regularly (and seemingly randomly) the laptops connectivity to the internet will drop out... i.e. websites won't respond, big websites (like google) don't respond to pings or anything. While these internet "drop outs" are happening, i can jump onto my PC (which is connected to the airport extreme via ethernet) and the internet is working fine.
Also, Wifi never drops out through this whole situation. This means that while I can't access the internet, my reception is still FULL and I can SAMBA connect to my PC and with other computers on the network.
It's very strange that purely internet via the Airport Extreme is having these issues.
The Airport is in Bridge mode (which means the ADSL modem/router is the DHCP server). The ADSL modem/router does not have wifi active or anything connected to it (other than the airport).
I've never had any issues with my internet - this is the first. My only real option if this can't get resolved is to return the airport, as this is inhibiting me from working from my laptop.
Anyone else experience similar issues?
Can someone recommend any course of action to work around this issue?
Is there anymore information this forum needs to debug this problem? How can I obtain this info?
I hope someone can help.
Regards,
Vijay

I seem to be in a very similar predicament, however I'm served even worse:
I'm loosing Internet connection over both LAN and WIFI. And the Airport Extreme does not detect the loss of connection even though the logging indicates the internal ntp client (trying to connect to time.euro.apple.com) fails (already on dns resolution).
Currently, I'm dvlp-ing a shell script that checks 4 websites, and if all 4 are unaccessible, I launch an applescript that restarts my airport extreme basestation.
This however does not always seems to solve the problem. Seemingly I would have to reset the modem.
The problem can - according to me - not be provider related, since it does not occur when the TimeMachine is replaced by a SL-installed mac mini (that however cannnot function as router (yet)).
Any hints ? anyone ?
I previously had installed an Airport Extreme 10/100 version, which showed the same behaviour. Since the system was out of warranty, I decided to upgrade to a faster system, including TimeMachine, but unfortunately, the problem is still there.
I'm guessing now it could be related to the router being configured in dhcp (getting its ip address over dhcp), but the server provides a static ip address (never changes),... and maybe here there's something fishy.

Connecting to internet via windows and airport extreme

I have an imac with a security enabled airport extreme base station. When I startup in Windows via bootcamp and try to connect to the internet I don't know how to enter the network password. Windows sees the network and prompts for a password but my password does not work. Does anyone know what the windows OS is looking for?
Mark

Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
iFelix

Automatically connect the Internet via dial up connection?

Hi all,
I am using LabVIEW 6i. I require to connect the internet via modem. I want this to be done automatically. I read some of the discussion here which discuss some AT protocols. Sorry, but I am not aware of these protocols.
After this auto connection I want to get data from some links. I think this I could using URL property of the windows' browser. If some one has other options please let me know.
Thanking you.
Vishal Shah.

I'm not sure I understand your problem. Do you want to dial up a flow controller and talk to it via
Modbus? I am familiar with Modbus and modem connects.
Alan
"Vishal" wrote in message
news:[email protected]..
> Hi Dennis,
> Thanks for the support.
> In our application we require to make connection of flow controller
> which are connected through modems and using MODBUS protocols. So it
> require to connect different modem (number) at different interval. Due
> to this what ever you have suggested is applied only if I need to
> connect only Internet through it. But which is not our application.
> So if you know about modbus protocols please let us know. Please guide
> us for this.
>
> Thanks.
>
Regards,
> Vishal.

I have a problem in connecting to internet via WiFi.

I have a problem in connecting to internet via WiFi. This week I received my new "iPhone 6 and 6 plus". Problem is the new phones doesn't connect to internet via my home WiFi while I don't have any problem on my other devices. The phones connect to WiFi but most of Apps can't connect to internet.

Hi vpouya,
If you are having an issue with connecting to the Internet from your iPhones via Wi-Fi, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

I keep getting error message " server stopped responding" when trying to connect to internet via wifi

My iphone works fine using cellar network, but will not connect to internet via wifi. Ive reset network setting with no diffrence.
Any ideas?

And you can turn the WiFi button on and off?
If yes, then you next need to try to Restore your iPhone from your backup.

Connection to internet via ADSL with password login - using airport extreme

Similar Messages

Maybe you are looking for