Connection to Jabra SP5050 and N70 ?

Hi
Just bought my wife the Jabra SP5050 Bluetooth handsfree.
She has 2 phones, the Motorola Razr V3 and the N70 both of which cant find the SP5050 when searching via Bluetooth.
I have the N95 and that finds it straight away.
Any ideas what is going on here ?
I am guessing a need for updated software version on the N70 ??
Any help would be great
Cheers
Paul

indid, when everything fails RTFM will work!

Similar Messages

  • Can't pair Jabra SP5050 with iPhone 5.  Any suggestions?

    Finally upgraded from my old iPhone 3GS to iPhone 5 but now it won't pair with my Jabra SP5050.  I've followed the Jabra instructions but my phone just won't find it.  Are they incompatible?

    Interesting.  I tried your suggestion - got the 3GS to forget the Jabra SP5050 - but still no luck pairing with the iPhone 5. I successfully paired the Jabra again with the 3GS, so that combo definitely works.  I googled the troubleshooting/faq full user manual for the Jabra and found that you can make it forget any pairings by pressing and holding the volume up and volume down together with the answer/end button for 7 seconds.  I did that and then tried pairing the Jabra with the iPhone 5 and success!

  • Hi! I want to connect my Jabra easygo Bluetooth device with my iPad but iPad is not detecting the Bluetooth device

    Hi! I want to connect my Jabra easygo Bluetooth device with my iPad but iPad is not detecting the Bluetooth device

    Hi Usmanfarooq83,
    Here is an article of troubleshooting for bluetooth devices and iPad:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Cheers!
    - Ari

  • Bluetooth - use of Jabra Earpiece and Artonecs U&I-03 hearing aid Loop

    Read the post which mentioned the Jawbone, I too tried to connect the Jabra earpice I use with my phone to the iPod Touch, no luck. I was also trying to connect an Artonecs U&I-03 bluetooth hearing aid loopset. This allows a deaf person to have their mobile phone play back through their hearing aid.
    My deaf brother wants to be able to hear his music again and I'd hoped that one way would be by using a bluetooth loopset that would connect to the eharing aid.
    Unfortunately the IPod doesn't recognise it.
    Anyone know whether an IPhone would recognise it and if it did would it send music output through the Bluetooth.
    Thanks

    Information but not a solution. I have Phonak (Swiss) Naida (model) hearing aids with an iCom (loop) which the iPod Touch (4th generation) recognizes and will send the music on my iPod to my aids.
    For some peculiar reason I cannot get the audio of Skype phone calls I initiate to also come through the aids. Apparently that is not feasible.

  • How do I connect both a Mac and PC to Apple TV Home Sharing?

    Goal
    - I am trying to share both my PC and Mac through my Apple TV2 on the "Computers" home sharing menu.
    - These are 2 seperate iTunes accounts as they are 2 different owners of the PC and Macbook.
    - However, home sharing only allows me to have one at a time, can I not have 2 computers connected?
      (The menu is in fact plural and says "Computers" not "Computer")
    Attempt
    -I turn on home sharing on my PC with my PC iTunes account, it then shows up on the "Computers" list as PC
    -I turn on home sharing on my Mac with my Mac iTunes account, it then shows up on the "Computers" list as Mac, but it deletes the PC share
    Troubleshoot
    -So I started from scatch and connected the PC share with my PC itunes account, it shows up,
    -Then I connect the Mac home sharing with the same iTunes login as my PC, but it also erases my PC from the "Computers" list and just displays the Mac.
    Question
    -How do I connect both a Mac and PC to Apple TV Home Sharing?
    -I want them both to show up in the "Computers" list.
    -So the final result will look like this on my Apple TV menu:
    Computers
    -PC
    -Mac
    whew... I'm out of breath... I hope there is an Apple Genius out there that can help.
    Thanks!

    After retrying the home share with the SAME ITUNES ACCOUNT ON HOME SHARING I finally got it to work.

  • My ipod touch is stuch on connect to itunes screen and once in itunes wont restore or let me back into my ipod. What do i do?

    My ipod touch 4th gen was given to me by a friend. It worked fine until it got the recent update ios6. when i went to install it gave me a black screen that had the connect to itunes symbol.I plugged it in and it instantly told me to restore my ipod. All i want to do is be able to use my ipod again so i said yes. Half way through each time it tells me there  is an error something is not connected or timed out and it stops.I have tried holding down home/sleep button and rebooting but each time it brings me strait back to plug into itunes screen and does not give me slide to shut off option. I have tried plugging it into a different computer (my home and my lap top) i have plugged it into the wall. i have done everything i have seen imaginable.I tried calling apple one guy said he'd help even though it wasnt under warrenty but had to call me back and (surprise) he never did and the second before he would connect me to help said i needed to pay 20 bucks. I dont have the money to do phone service and the genius bar is an hour drive away. Is there anything i can try that i havent yet? Or a way to completely shut it down and turn it on like brand new out of the box? Im really stressing out over this because ive never had to deal with this before. Please help!!

    Temporarily disable your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • Can no longer connect to my network and 'forget network' option has disappeared??

    Can no longer connect to my network and "forget network" option has disappeared???  (Ipod touch 5th generation). This happened on both my children's ipods. We have reset network settings but it doesn't help.

    JEM24 , your suggestion is included in:
    - iOS: Troubleshooting Wi-Fi networks and connections
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    JEM24 wrote:
    Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers.

  • I can not send email from my iPad .  Have been using it for over a year, all of a sudden I can only receive email.  I have a wifi connection in my home and have a A T &T cellular data plan?

    I can not send email from my iPad .  Have been using it for over a year, all of a sudden I can only receive email.  I have a wifi connection in my home and have a A T &T cellular data plan?

    I have a 1st gen iPhone that I just updated the software to 2.0.2
    Now whenever I press the mail icon it goes to the mail app for about 4 seconds, does nothing, no loading of folders, old messages, nothing.
    Then it reverts back to the home screen. Tried restarting, haven't tried restoring, thought I'd look here first.
    Anyone???

  • My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Connection between SDM client and server is broken

    Dear All,
    First of all this is what I have
    -NW04 SPS 17
    -NWDS Version: 7.0.09 Build id: 200608262203
    -using VPN connection
    -telnet on port 57018 is succesfull
    I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
    Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
    Inner exception was :
    Filetransfer failed: Error received from server: Connection between SDM client and server is broken
    I have already read a lot of topics,blogs,notes but didn't find the solution.
    Can anybody help me?
    Best Regards

    Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
    I have turned SDM tracing on and this is what I see on client side after sending first data package:
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
    com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
    com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
    com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1,          43):Connection reset"
    com.sap.bc.cts.tp.net.NetComm: debug "  throwing IOException(net.id_000001)"
    com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
    My connection on server is still active so I have to restart SDM server to reset and try it again.
    Anyone have idea whats happening?
    Edited by: skyrma on Feb 24, 2012 2:46 PM
    Edited by: skyrma on Feb 24, 2012 2:47 PM
    Edited by: skyrma on Feb 24, 2012 2:47 PM

  • (Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

    Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
    I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
    Let me know if you know why this is happening.

    With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
    Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
    While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
    I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
    You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
    Something you can try:
    System Preferences -> Network
    Gear icon on the bottom left, next to the [+] [-] icons.
    Select *Set Service Order...*
    Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
    NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

  • Network Connection Failures Affecting Printing and Finder Access

    I have a Canon MX320 connected via USB to my iMac running OSX 10.9.1.  The latest Canon printer drivers are installed.  Everything works fine with this printer and computer combination.  The printer is enabled for shaing over the network.
    The problem is that occasionally, the iMac seems to disconnect from any other laptop or desktop computer (Macs or PCs) connected through my wireless router.  On a mac laptop (also with OSX 10.9.1) I may lose access to shared directories on the iMac, and more often, I lose the ability to print from the laptop.  The print queues are unchanged on all Macs, but remote printing over the network fails with the message "printer not connected", even though the only change may have been that the iMac hosting the printer went to sleep. 
    Sometimes, waking the iMac allows the network print job to go through, but typically not if the print job is initiated before waking the iMac.  The printer queue on the laptop will seem fine, with "printer idle", but as soon as the print job is submitted, it briefly reports "looking for printer", and then "printer not connected".  Sometimes, everything (iMac and laptop) needs to be rebooted to re-establish a network printing connection through the iMac. 
    Trying to reset or delete and re-install the printer queue on the laptop does not fix the problem.  I am assuming that this is because the remote connection to the server (the iMac) has effectively been interrupted or lost.  The iMac may show up in a Finder window on the laptop as a simple PC icon, but with none of the connected directories visible.  trying to re-mount the remote directories by connecting to the "server" (the iMac) often fails.  It is as if something has happened to break the connection to the iMac, and both Finder and network printing are thereby disabled until everything is rebooted.
    Printer error log entries:
    E [13/Feb/2014:08:21:43 -0500] Unknown directive BrowseOrder on line 9 of /private/etc/cups/cupsd.conf.
    E [13/Feb/2014:08:21:44 -0500] Unknown directive BrowseAllow on line 10 of /private/etc/cups/cupsd.conf.
    This problem is intermittent but seems to be happening often after the Mavericks upgrade.  One should not have to wake up a remote computer prior to connecting to it, or asking a printer connected to it to print a job.

    Hello Rescue_2003
    Check to see if Wake for network access is checked in System Preferences > Energy Saver.
    OS X Mavericks: Share your computer’s resources when it’s in sleep
    http://support.apple.com/kb/PH14244
    Regards,
    -Norm G.

  • Remote for my IPad says connecting to apple TV and it won't connect?

    On the remote app on my iPad and iPhone it says connecting to apple tv and it never connects. This just started happening yesterday. How do I fix it. I restarted everything.

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

    Hi
    I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
    I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
    Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
    Would you please help me out? I would really appreciate it.

    Hi..
    Restart your router then restart the iPhone to test.
    If that doesn't help, try this support article >   iOS: Troubleshooting Wi-Fi networks and connections

  • When i plug the USB for my iPad into my computer it will connect then disconnect over and over again untill i wiggle the usb around alot. This is happening to all my ports. But not on the other computer.

    Hi. Whenever i plug my iPad (Happens with ipod and iphone too) to my computer usb for itunes is will connect, then disconnect over and over again. It has happened for a long time but doesnt happen on my other computer. how do i fix this?

    If you have a spare cable, try using that.  But the fact that this doesn't happen on your other computer (I assume using the same old cable) leads me to conclude that something else is at work.  Maybe even the "bad" computer.

Maybe you are looking for