Connection to remote device timed out

The connection from my computer to the FP-1600 module is through a hub and two cat-5 cables. Able to see the device under the "Remote Systems" tree, the device name is its IP. I used my computer's own IP as the Time Server. A "The Connection to a Remote Device Timed Out" error message appears when I clicked on Find Devices. Any kind of help would be greatly appreciated.

Hello Yuen,
Is the status LED on your FP-1600 blinking? If so, how many times?
Try connecting directly to your FP-1600 via a cross-over ethernet cable. Configure the IP address, then attach the controller to a hub. See if you are able to find the devices then.
Let me know your results.
Regards,
Sean C.

Similar Messages

HT1386 Help iphone won't connect - "device timed out" error AGAIN & AGAIN

I recently updated my phone to IOS 7.02 and now when I try to connect to itunes I get a "device timed out" error. Thinking it must just be my itunes out of date, I updated it too. Again and again the " device timed out" error still happens. What an utter mistake to have loaded the new IOS. I have scoured the help files, I have looked at hundreds of discussion threads - nothing. The only thing I find is many many people seem to have this issue and no one can get it solved. obviously Apple doesnt give a crap if you are forking out every 6 months.

Hello,
I would run through the troubleshooting steps in the following document - which one you choose depends on the operating system you're running. You've already done some of the early steps such as updating iTunes, but there are a couple of other steps you can try, such as verifying Apple Mobile Device Support is installed:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Welcome to Apple Support Communities!
All the best,
Delgadoh

"device timed out" when connecting ipad to computer

i have a mac book pro from 2013 and an ipad 3rd generation (as what it was labeled) from 2012 (i just got). I plug the ipad into the computer and itunes pops up and says that the device timed out and it can't connect to the computer. I have updated my mac and there are no updates for the ipad. i have tried different cords. i'm not the most tech savy, however. please help!?

This support article might be of some help.
iTunes: Resolve USB-related alerts - Apple Support
The the first thing that I always try when I have any issues connecting my iPad to my MacBook Pro is to eject my iPad, quit iTunes, reboot the Mac, reset the iPad and then try again.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons and let the iPad start up. No data is lost when you reset an iOS device.
After doing all of that, try connecting again.

ITunes could not connect to the iPad "Micah's iPad Air" because the device timed out.

After using my ipad air for the last week, I plugged it in for the first time to back up some videos. I get this message: iTunes could not connect to the iPad “Micah's iPad Air” because the device timed out. Any ideas?

Eject your iPad if you haven't already done so. Quit iTunes and restart your computer. Reboot your iPad and then try again, use another USB port on your computer, of you have another free port available,
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Why does my itunes say "Itunes could not connect to the iphone because the device timed out"? I just want to sync my iphone with my itunes. please help

why does my itunes say "Itunes could not connect to the iphone because the device timed out"? I just want to sync my iphone with my itunes. please help

If you are using a USB hub, don't. Connect directly to the computer. Disconnect all other USB devices except for keyboard and mouse.

HT1386 when i connected my iphone 5s to itunes for the first time then a window appered saying your device timed out. whats happening and how do i connect my iphone?

when i connected my iphone 5s to itunes for the first time then a window appered saying your device timed out. whats happening and how do i connect my iphone

Hello Hema2003,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Best of luck,
Mario

TS1567 iTunes could not connect to the iPhone because the the device timed out

iTunes could not connect to the iPhone because the the device timed out with iPhone4

Hello AAAN14,
The article linked below provides troubleshooting steps that can help resolve this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Cheers,
Allen

ITunes could not connect to the iPhone "" because the device timed out.

I can't sync my iPhone 4s after updating. I keep receiving the message iTunes could not connect to the iPone because the device timed out. Help!

If you are using a USB hub, don't. Connect directly to the computer. Disconnect all other USB devices except for keyboard and mouse.

Connect iPad to MAC computer and get this message: iTunes could not connect to the iPad because the device timed out. ??

Connect iPad to MAC computer and get this message: iTunes could not connect to the iPad because the device timed out. What is the likely problem???

Eject the iPad, quit iTunes, restart the Mac and reset the iPad and try again. Use another USB port on the Mac if you have a free one to use.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons and let the iPad start up.

Itunes could not connect to the iphone "Clemence Iphone" because the device timed out. I've got IOS 7.0.4 and Itune v11.1.3.8 Help!!!!

Hi
I've bought an Iphone 4S 2 weeks ago - and just download Itune
I've got IOS 7.0.4 on my Iphone and Itune v11.1.3.8 on my Labtop
When I connect my phone to the labtop, it does recognize it
But Itunes could not connect to the iphone "Clemence Iphone" because the device timed out.
Please help
Clem

are you using a usb hub or splitter? dont
have you tried a different cable and usb port? you should
have you restarted computer? you should
if you have done all this
pause all security software and dropped firewall.
Peace, Clyde

New iPad Air can't connect to iTunes; device "times out"; no error code given

my iMac (8 months old) is running 10.8.5 with latest version of iTunes. When I try to connect my new iPaid Air with a cable, iTunes open, after a few seconds, a windows appears saying "iTunes cannot connect to the device named Peggy's iPad because device timed out". no error code is given. I have restarted my computer and the iPad various times and tried different USB ports on the iMac. I am using the original lightning cable that came with the iPad to connect. I didn't have this problem with my old iPad 2 or with my iPod touch. I do not have any security software installed and no firewalls, etc. Any suggestions on what is causing this problem? Thanks.

You should repost this over in the "using iPad" forum. The iPad gurus hang out there. This is the MacBook Air forum. Here is the link:
https://discussions.apple.com/community/ipad/using_ipad
Regards,
Captfred

Disconnecting listener connection to workstation, request timed out

<b>144820.P0251WLADC!WSL.6461.1.0: WSNAT_CAT:1175: WARN: Disconnecting listener connection to workstation, request timed out</b>
hello all,
i have been observing this error number of times these days.
catalogue messages say "This probably indicates that the number of workstation clients that need to join the application can not be supported by the existing configuration"
how do i define a client?
I want to know diffrence between remote clients & native clients.As far as i know remote clients are WorkStation clients but what are native clients?
thr is billing application (Singl.eview 4.02) residing above tuxedo 7.1 & by Work station clients i mean all remote clients logging into the front-end of the billing application.
i run following script:
echo 'pclt' | tmadmin -r 2>/dev/null | egrep -v '>|-------|tpsysadm|tmadmin|WSH|^$'|wc -l
& most of the times i get o/p greater than 40 (MAXWSCLIENTS)
basically,what is the diffrence between front-end clients and tuxedo clients/users?
this is what has been defined in my ubb...
MAXACCESSERS 4000
MAXSERVERS 1200
MAXWSCLIENTS 40
pls clarify the doubt.
thanks & regards
abhijeet

Hi Abhijit,
The message regarding time out is probably due to time limit defined for WSL in your UBBConfig file. Check whether in CLOPT parameter for WSL timeout value(with '-t' option) is defined or not? due to this timeout value, whenever any WS client will be in idle status more than the timelimit, will get disconnected with the warning message.
Native client is the client process which interact with Tuxedo services without using WSL, means that process should run on the same box. But a remote/WS client may reside on same as well as on remote box.
Regards
-Ashish

Connection on default ports timed out

I administer an xserve that up until 3 days ago was sending and receiving email fine. After a user went over quota I adjusted their quota to allow them to remove emails as they were unable to modify any email at all. In the process of adjusting their quota I have broken something and now get "Connection on default ports timed out" error.
I am able to send using webmail but unable to receive from an external source
I have posted my post configuration below and would appreciate any help.
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = localhost
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 26214400
mydestination = $myhostname,localhost.$mydomain,wcc.school.nz
mydomain = wcc.school.nz
mydomain_fallback = localhost
myhostname = mail.wcc.school.nz
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpdenforcetls = no
smtpdpw_server_securityoptions = plain,login
smtpdrecipientrestrictions =
permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/certificates/Default.crt
smtpdtls_keyfile = /etc/certificates/Default.key
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550

It's not surprising.
Your configuration includes:
inet_interfaces = localhost
This tells postfix to listen on localhost only. i.e. it won't listen on the network interfaces and accept mail from remote clients.
There may be other issues with the configuration, too, but that's the first one to fix.

Itunes tell me the device timed out . I'm not understand what's mean

itunes tell me the device timed out . I'm not understand what's mean
And not connect with my ipad

Hello mohamed abdo,
The article linked below provides some useful troubleshooting steps that can help resolve this issue.
If the USB communication to your iOS device isn't working properly, you may see one or more of these symptoms when attempting to sync your iPhone, iPad, or iPod touch:
An alert messages indicates "iPhone has timed out" during syncing.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Cheers,
Allen

I hav an iphone 2; previously i synced it with itunes and it was perfectly working bt now the syncing gets automatically stuck in between and it doesnt copies any music frm my pc; it shows tht ur such a song was nt added as d device timed out; wat to do

i have an iphonbe 2; previously i synced it with my pc to add music and it wrked efficiently; bt nowadays wenever i connect my phone to my pc it starts syncing and it automatically gets stuck in between and m now unable to add any songs or videos to it and still 3 gb space os free in my fone; after sometime it automatically shows tht songs were nt added as the device timed out; wat to do

I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
- Restore from backup via iTunes. This will install a fresh copy of the iOS. See:
iOS: How to back up
- Restore to factory settings/new iOS device.   This will elimate corruptin in the backup causing the problem.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Connection to remote device timed out

Similar Messages

Maybe you are looking for