Connection to SAP is showing cancelled status
HI all,
I have reported the product error to SAP regarding FI issue. Wherein they have asked me for connection to my production system.connection is open from last 4 hours but in Connect to SAP section it gives me other than yellow(Host did ot reply) and green(Connection open) which is "Cancelled" status. Now when i see in product report section it gives me green status + Access data provided. wat exactly is happening i can not rectify.
I think my connections are open but why am i getting this "Cancelled status"? Even by clicking system it shows that cnnection isopen since 5 hours . Where is the problem. Please help as it is high priority error and i need to solve it ASAP.
Regards,
Vaibhav Gore
Hi,
Change your ROUTETAB permissions to P * * * and restart your sap router and try.
This problem may occurs with route tab permissions.
Regards
Nick Loy
Similar Messages
-
SAP Router status shows cancelled in SMP
Dear all,
We have an issue in SAP Router - SMP.
I have checked SAP status , its shows cancelled in Service market place.
we could not able access SAP through Router string .
Kindl;y advise.The envieroment variables are ok,
Check the saprouttab file in C:\saprouter, open the saprouttab file and check entries.
Example saprouttab
SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC connection to local system for R/3-Support
R/3 Server: 192.168.1.1
R/3 Instance: 00
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.1 3200
SNC connection to local WINDOWS system for WTS, if applicable
Windows server: 192.168.1.2
Default WTS port: 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.2 3389
SNC connection to local UNIX system for SAPtelnet, if applicable
UNIX server: 192.168.1.3
Default Telnet port: 23
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.3 23
SNC connection to local Portal system for HTTP URL access, if applicable
Portal server: 192.168.1.4
HTTP Port: 50003
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.4 50003
Access from the local Network to SAP
P 192.168.. 194.39.131.34 3299
Deny all other connections
D * * *
More info in:
http://service.sap.com/access-support
Technical Prerequisites -> How to establish Internet Connections -> SNC: Installing crypto functions
I hope that you can solved your issue -
SAP PI Message Cancellation Alert - Message does not have restartable error status
Hello SCNers
Version: 7.1
Scenario: File --> PI -->SOAP
We have a situation where a PI message in Integration Engine shows error status.We want to cancel the message in IE but are unable to do so.
On clicking Cancel for this message in SXMB_MONI, we are receiving an alert "Message does not have restartable error status".
In SXMSPMAST table, value for ITFACTION is DEL.
We do not want to run report RSXMB_DEL_TO_ARCH, that would change status of all messages with DEL status to ARCH.
Is there a way to Cancel or Change the Status of this single message?
Regards
SudheerHi Hareesh,
Tried that too, but to no avail.
Strangely, the log shows NO_ERROR_STATE for the cancelation of this message thru RSXMB_CANCEL_MESSAGES.
But in SXMSPMAST table the status of this message is 14 (System Error - Manual Restart Possible).
Regards
Sudheer -
Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
Runtime audit browser shows the status busy for the cancelled OWB jobs
Hi ,
I canceled long running OWB job.But the runtime audit browser was showing the status as BUSY.
I observed the the oracle session (SID:48) was running and killed the session.
After killing the session,the status in runtime audit browser changed to COMPLETED.
Till that time i was with an impression that "if we cancel a OWB job then it will kill all the sessions/process that initiated".
Could please tell me why this is happening?
Anything wrong with my configuration?
Appreciate early response.
Thanks,
NaiduHi Naidu
Yes you are absolutely right. When you press the cancel button in the GUI, the runtime repository does not get the signal that he is been asked to stop and abort. The GUI cancels himself but the background oracle process is still on !!!. The only way to do is to kill the oracle session. Another way I tried to tackle is
go to the directiry OWB/10.1/owb/rtp/sql and run the file @list_request.sql in sqlplus. Note that you have to login as runtime repositiry owner. After you get the audit id, run the file abort_exec_request.sql and supply the audit id that you obtained by running list_requests.sql. Sometimes it does not work also . Hence the best method is to kill the process -
After installing and configuring App fabric 1.1 and ran Get-CacheHost command to check the status of the nodes. Its showing the Status of the nodes as UNKNOWN. Some time caching service is crashing with Timeout exception and socketException connecting
to cache nodes. Below is the exception from the even log. When I see the debug log I could see timeout exceptions connecting to cache nodes. Here is the error in debug log. I appreciate your help on this. Thanks.
Error in Debug log in event viewer
Microsoft.Fabric.Common.OperationCompletedException: Operation completed with an exception ---> Microsoft.Fabric.Common.RemoteDownException: Connection rejected by the remote side ---> System.ServiceModel.EndpointNotFoundException: Could not connect
to net.tcp://xxxxx. yyyyyy:22234/77b087cc000000000000000000000000-31faf87a000000000000000000000000. The connection attempt lasted for a time span of 00:00:00. TCP error code 10061: No connection could be made because the target machine actively refused it
25.0.198.32:22234. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 25.0.198.32:22234
Error in Event viewer
AppFabric Caching service crashed with exception {Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRService0001>:SubStatus<ES0001>:Service initialization failed. No user action required. ---> Microsoft.Fabric.Common.OperationCompletedException:
Operation completed with an exception ---> System.TimeoutException: The operation has timed out.
--- End of inner exception stack trace ---
at Microsoft.Fabric.Common.OperationContext.End()
at Microsoft.Fabric.Common.SharedCommunicationObject.EndOpen(IAsyncResult result)
at Microsoft.Fabric.Federation.FederationSite.EndOpen(IAsyncResult result)
at Microsoft.Fabric.Data.ReliableServiceManager.EndOpen(IAsyncResult ar)
at Microsoft.ApplicationServer.Caching.DOMNode..ctor(Int32 id, String displayFriendlyNodeId, Int32 port, EndpointID[] urisDOM, ServiceConfigurationManager configurationManager, ReliableServiceProvider dataStore, ServiceResolverBase& client)
--- End of inner exception stack trace ---
at Microsoft.ApplicationServer.Caching.DOMNode..ctor(Int32 id, String displayFriendlyNodeId, Int32 port, EndpointID[] urisDOM, ServiceConfigurationManager configurationManager, ReliableServiceProvider dataStore, ServiceResolverBase& client)Seems like a firewall issue, have you set the firewall rule to ALLOW inbound traffic to AppFabric?
-
SAP HANA Coud Portal is showing "HTTP Status 401 - Unauthorized"
Hi ,
After clicking SAP HANA Cloud Portal From Cloud Cockpit its showing "HTTP Status 401-Unauthorized". Previously it was working fine for me and i have created and tested some widget also.But now i am getting this error.Please help me on that.
Thanks And Regards
Syed Shadan QuaiserHi Mahendran ,
Thanks for the details.
The host is hanatrial.ondemand.com
I checked your account configurations on Cloud Portal and it looks correct.
Did you change your trust settings on your account cockpit?
Please go to: https://account.hanatrial.ondemand.com/cockpit >> Trust and make sure that the settings there are default ones.
Thanks, Amit -
RFC JCo 3 unable to connect to SAP AS with sapgw01 service
Greetings - help is greatly appreciated.
I have an RFC server that uses JCo 3.0.5 to connect to the SAP Application server. When the RFC server is run from a Unix system the gateway service and port needs to be added to the unix systems /etc/services file. We have two (actually 21) sap systems, one has a gateway service id of sapgw00, the other sapgw01. We added both gateway services with port 3300 to the Unix /etc/systems file and are able to connect to the sapgw00 system but not the sapgw01 system. The sapgw01 system is returning the following error. Without sapgw01 in the /etc/services file we get a different error - so it's doing something.
Thanks in advance
Status: Server FLRFCSRV state changed from [STOPPED] to [STARTED]
>>> Exception error occurred on FLRFCSRV connection null
com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu Apr 29 09:16:10 CDT 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:10 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 1
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1168)
at com.sap.conn.jco.rt.DefaultServer.openConnections(DefaultServer.java:1057)
at com.sap.conn.jco.rt.DefaultServer.adjustConnectionCount(DefaultServer.java:1004)
at com.sap.conn.jco.rt.DefaultServerManager$DispatcherWorker.run(DefaultServerManager.java:299)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:10 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 1
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2135)
at com.sap.conn.jco.rt.ServerConnection.accept(ServerConnection.java:380)
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1149)
... 4 more
Caused by: RfcException: [null]
message: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:10 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 1
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
at com.sap.conn.rfc.engine.RfcIoControl.error_end(RfcIoControl.java:255)
at com.sap.conn.rfc.engine.RfcIoControl.ab_rfcaccept(RfcIoControl.java:43)
at com.sap.conn.rfc.api.RfcApi.RfcAccept(RfcApi.java:41)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2121)
... 6 more
Status: Server FLRFCSRV state changed from [STARTED] to [DEAD]
>>> Exception error occurred on FLRFCSRV connection null
com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu Apr 29 09:16:12 CDT 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next .
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:12 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 2
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1168)
at com.sap.conn.jco.rt.DefaultServer.openConnections(DefaultServer.java:1057)
at com.sap.conn.jco.rt.DefaultServer.adjustConnectionCount(DefaultServer.java:1004)
at com.sap.conn.jco.rt.DefaultServerManager$DispatcherWorker.run(DefaultServerManager.java:299)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:12 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 2
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2135)
at com.sap.conn.jco.rt.ServerConnection.accept(ServerConnection.java:380)
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1149)
... 4 more
Caused by: RfcException: [null]
message: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:12 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 2
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
at com.sap.conn.rfc.engine.RfcIoControl.error_end(RfcIoControl.java:255)
at com.sap.conn.rfc.engine.RfcIoControl.ab_rfcaccept(RfcIoControl.java:43)
at com.sap.conn.rfc.api.RfcApi.RfcAccept(RfcApi.java:41)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2121)
... 6 more
A startup error occurred - please view the log file for additional information
>>> Exception error occurred on FLRFCSRV connection null
com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu Apr 29 09:16:18 CDT 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next .
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:18 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 3
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1168)
at com.sap.conn.jco.rt.DefaultServer.openConnections(DefaultServer.java:1057)
at com.sap.conn.jco.rt.DefaultServer.adjustConnectionCount(DefaultServer.java:1004)
at com.sap.conn.jco.rt.DefaultServerManager$DispatcherWorker.run(DefaultServerManager.java:299)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:18 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 3
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2135)
at com.sap.conn.jco.rt.ServerConnection.accept(ServerConnection.java:380)
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1149)
... 4 more
Caused by: RfcException: [null]
message: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:18 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 3
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
at com.sap.conn.rfc.engine.RfcIoControl.error_end(RfcIoControl.java:255)
at com.sap.conn.rfc.engine.RfcIoControl.ab_rfcaccept(RfcIoControl.java:43)
at com.sap.conn.rfc.api.RfcApi.RfcAccept(RfcApi.java:41)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2121)
... 6 moreHello Sir,
I am a student who is pursuing a project that deals with JCo 3.
I read your question on the forum and think that you have done the JCo stuff and can answer my questions.
Kindly, try to shed some light on following question:
Q1: I simply want to start with connecting my SAP system. I have a user ID and password for the same.
I saw some examples where they use "JCo.createClient(....)" and "JCo.client.connect()" to simply connect the client but
when I type in the code it shows me an error, because they are using package "com.sap.mw.jco" but since I am using JCo3,
I don't have that package instead I have "com.sap.conn.jco" which do not have createClient function.
Q2: By setting the classpath for "sapjco.jar" I was able to compile one of the sample programs but could not run it. Do you
know how to run the SAP JCo program.
Your guidance will be highly appreciated
-Thanks
-Dmukhi -
Remote connections in SAP support portal time out
Hello, we are having a problem opening connections to our systems in the support portal and would appreciate any help and direction. This is probably a problem with our SAPRouter or firewall configuration but have been unable to identify where that problem is, and we are working closely with our network folks to try to correct. We are able to download OSS notes through SNOTE and all of the RFC's work correctly but we can't seem to keep a connection open to allow SAP support to login to our systems. The connection appears to open for about three minutes but then gives the error "Host did not respond 1-9 times" then the connection shows cancelled after about 18min. We have had a high priority incident open with SAP for the last couple of weeks but haven't got much response from them. SAP has the IP addresses of our SAPRouter and VPN correct and the routestring is correct.
SAPRouter = 216.253.195.169
VPN = 216.253.195.170
Routestring = /H/colo-sap-router.insummit.com/S/3299
We are able to ping SAP(194.117.106.129) from the saprouter server successfully. A few things I have read indicate that a simple test is that you should be able to telnet to SAP(ip above) on the configured port, 3299 but this we are not able to do and we've told this to SAP, we can telnet to port 21 but not 3299.
SAPRouter is on a Windows 2008 server OS using VPN. Attached is our saprouttab file.
Also attached is a trace.out file, and dev_rout file.
Here are the firewall ACLs:
access-list Outside extended permit ip host 216.253.195.169 host 147.204.100.142
access-list Outside extended permit ip host 147.204.2.5 host 216.253.195.169
access-list Outside extended permit ip host 216.169.212.169 host 147.204.100.142
access-list Outside extended permit ip host 194.117.106.129 any
access-list Outside extended permit ip any host 194.117.106.129
access-list Outside extended permit ip host 194.117.106.128 any
access-list Outside extended permit ip host 216.253.195.169 194.117.106.128 255.255.255.252
access-list Outside extended permit ip host 194.117.106.128 host 216.253.195.169
access-list Outside extended permit ip 194.117.106.128 255.255.255.252 host 216.253.195.169
access-list Outside extended permit ip host 194.117.106.129 host 216.253.195.169
access-list Outside extended permit ip host 216.169.212.169 194.117.106.128 255.255.255.252
Here are the routes:
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.5.0.1 10.5.0.222 266
10.5.0.0 255.255.255.0 On-link 10.5.0.222 266
10.5.0.222 255.255.255.255 On-link 10.5.0.222 266
10.5.0.255 255.255.255.255 On-link 10.5.0.222 266
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
194.117.106.128 255.255.255.252 216.253.195.170 216.253.195.169 21
216.253.195.168 255.255.255.248 On-link 216.253.195.169 276
216.253.195.169 255.255.255.255 On-link 216.253.195.169 276
216.253.195.175 255.255.255.255 On-link 216.253.195.169 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 10.5.0.222 266
224.0.0.0 240.0.0.0 On-link 216.253.195.169 276
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 10.5.0.222 266
255.255.255.255 255.255.255.255 On-link 216.253.195.169 276
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
194.117.106.128 255.255.255.252 216.253.195.170 1
0.0.0.0 0.0.0.0 10.5.0.1 Default
And here is the VPN tunnel info:
6 IKE Peer: 194.39.131.167
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
show ipsec sa peer 194.39.131.167
peer address: 194.39.131.167
Crypto map tag: cryptomap1, seq num: 15, local addr: 216.253.195.170
access-list encrypt_123_to_SAP extended permit ip host 216.253.195.169 194.117.106.128 255.255.255.252
local ident (addr/mask/prot/port): (216.253.195.169/255.255.255.255/0/0)
remote ident (addr/mask/prot/port): (194.117.106.128/255.255.255.252/0/0)
current_peer: 194.39.131.167
#pkts encaps: 459156, #pkts encrypt: 459156, #pkts digest: 459156
#pkts decaps: 65825, #pkts decrypt: 65825, #pkts verify: 65825
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 459156, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 216.253.195.170, remote crypto endpt.: 194.39.131.167
path mtu 1500, ipsec overhead 58, media mtu 1500
current outbound spi: 90CB4EA0
current inbound spi : 769BBB0D
inbound esp sas:
spi: 0x769BBB0D (1989917453)
transform: esp-3des esp-md5-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 20480, crypto-map: cryptomap1
sa timing: remaining key lifetime (kB/sec): (4373965/4063)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0x90CB4EA0 (2429243040)
transform: esp-3des esp-md5-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 20480, crypto-map: cryptomap1
sa timing: remaining key lifetime (kB/sec): (4373954/4063)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
Again, any help and suggestions is greatly appreciated.
Thanks,
BrentHI Brent ,
I see your problem is critical !!!!
But you can have a net viewer session with SAP .
Its simple and effective way of analysing issue in run time .
SAP SMP Netviewer Instructions DE - YouTube
Netviewer
Please check above Links
Regards,
Abhishek -
My iPad is disabled, connect to iTune, but when i connect to iTune, iTune showing to allow access please respond on iPad. but in long time it is not showing on device list of iTunes.
can any one help me.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
~~~~~~~~~~~~~
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
windows 8.1 itunes wont recognize ipad
https://discussions.apple.com/thread/5697247?start=0&tstart=0
Look at the solution in this link
https://discussions.apple.com/thread/5697247?start=75&tstart=0
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
Cheers, Tom -
Connection from SAP ERP 6 to B1i2007
Hello,
the test-connection between B1i and SAP is working, but when trying to test the connection from SAP to B1i, SAP gives the error mesaage that "the program is not registered".
The B1i-System seems to be not registered in the SAP and it is only shown as "external client" (and not as registered server).
Another problem is that in B1i we have entered as programID-name "B1iRFC" but SAP shows "tomcat5" as TP-name.
I thought B1i would register automatically on the SAP with the name of the programm-id entered.
Do we have to change someting in the tomcat-server or where to find the problem?
Thank you,
PeterHello Eddy,
thank you for your answer, but in R/3 I define a RFC-connection with a registered server programm by using the programID out of the B1i-RFCP-configuration, right?
And when trying to make a test-connection, I got an error message that there is no registered program with this programID.
I thought that B1i have to be registered in SAP or in the SAP-Gateway with the name of this programID.
I think my problem is the registered server program in R/3. Where do I get this program and how to register in the R/3 gateway? Isn't the tomcat-server this program?
Best regards,
Peter -
Problem in connection from SAP to XI
Hi Guys,
I have problem to connect from SAP to XI. We have existing SAP R/3 (IS-H) and we newly installed XI. We decided to use ABAP proxy to send data from SAP to XI. When I go to SPROXY system showing No Connection to Integration Builder. Please kindly advice what configuration we need to in SAP side in order to connect XI.
Its Very Urgent. Please advice me.
Thanks in Advance.
Regards,
Anil.Anil,
could you please have a look to SAP Note 689847 - XI 3.0: SPROXY - No connection to the Integration Builder
Cheers,
-Sunil -
How to show network status in top toolbar?
how to show network status in top toolbar? Network preferences is there, but network status has disappeared on last reset of Airport Express, but may not be connected. Thanks in advance for practical help
Interestingly, in my experience, using the method described above of unchecking the "Show Connected Servers" box in the Finder Preferences makes no difference in what I can put in the sidebar. I was able to move a sub-folder of a shared disk to the Favorites section of the Finder Sidebar, but nothing else. (i.e. I could not add the shard disk itself to the sidebar – either to the devices, favorites, or any other section, and I could only add a subfolder of the shared disk to the favorites section – not to the devices section or any other section). This was the same whether I had "Show Connected Servers" checked or not.
I'm running OS X Mavericks, and the setup I have is with a previous generation Time Capsule (i.e. the short, square kind that you could buy before the most recent taller variety came out last year), with a LaCie 3 TB USB 3.0 external drive plugged into the USB port of the Time Capsule. I'm then accessing this network drive over WiFi. The differences in what I'm seeing may be due to some change they made in the way Mavericks handles these setups.
I could also just be misunderstanding what you're saying, but I thought I'd add this in case anyone else gets similar results so that they'd know they're not alone. Let me know if I'm missing something here. -
Live Office Error when connecting to SAP BW data (Offline dashboard)
Hi experts,
we have built up an Live Office connection to SAP BW query data to create a dashboards, which can show the data also in offlne mode. We are using exactly the same procedure as recommanded by Ingo Hilgofort in [End-to-End Scenarios With Xcelsius 2008|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/90ad73b1-506c-2b10-9e9b-9fde523f010a].
When trying to refresh the Live Office connection using the "Refresh" button in the dashboard we receive the error LO 26301: The current refresh option requires a report instance that does not exist.
The recommended action is: Change the refresh option of the object or use the CMC to schedule a new instance.
But creating an instance of the dashboard is not possible. What is meant by that? Is it necessary that we embed the Xcelsius flash into a PDF or a Crystal Report? What are our alternatives?
Best regards,
SebastianSebastian Koeffer wrote:
Hi Gowda,
>
> an instance of the report did not solve our problems. Even if it does, this is not our preferred solution. Anyway we would like to prefer to use the direct universe connection (Create new universe query) instead of linking to a Webi or Crystal report.
>
> Best regards,
> Sebastian
Hi Gowda Timma Ramu,
i create an instance of report by USER1... and..... dashboard is pointed to latest instance.
when i refresh a dashboard (by clicking on refresh button) it requires login to infoview ... i login to infoview by USER 2 not by USER1.....
it showing an error
_The current refresh option requires a report instance that does not exist. (LO 26301)_
Note:-But data is changing in dashboard
any solution for solving this error.
Its urgent...
Thank You. -
Problem connecting to SAP Open Hub
Hi, I am trying to set up a SSIS job connecting to SAP Open Hub and have with support from the SAP guys been able to get some progress, but it has now stopped up on a error message we're not able to solve. Any suggestion on what can be wrong and
how to solve this? When I run the package I get the following error message:
SSIS package "D:\Source\MSBI\SapLoadStaging\Package3.dtsx" starting.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, SSIS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, SSIS.Pipeline: Execute phase is beginning.
Information: 0x3E8 at Data Flow Task, SAP BW Source: Process Start Process, variant has status Completed (instance DH88PUV2SZBIFKMIF48K3USME)
Error: 0x3E8 at Data Flow Task, SAP BW Source: Process Data Transfer Process, variant /CPMB/HMIJYDZ -> ZOH_VPL has status Ended with errors (instance DTPR_DH88PUV2SZCA46Y9QNO66A6W6)
Error: 0x3E8 at Data Flow Task, SAP BW Source: The component is stopping because the Request ID is "0".
Error: 0x3E8 at Data Flow Task, SAP BW Source: No data was received.
Error: 0xC0047062 at Data Flow Task, SAP BW Source [41]: System.Exception: No data was received.
at Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceOHS.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper100 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer100[] buffers, IntPtr ppBufferWirePacket)
Error: 0xC0047038 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on SAP BW Source returned error code 0x80131500. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Information: 0x40043008 at Data Flow Task, SSIS.Pipeline: Post Execute phase is beginning.
Information: 0x4004300B at Data Flow Task, SSIS.Pipeline: "OLE DB Destination" wrote 0 rows.
Information: 0x40043009 at Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task
Warning: 0x80019002 at Package3: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "D:\Source\MSBI\SapLoadStaging\Package3.dtsx" finished: Failure.
The program '[6916] DtsDebugHost.exe: DTS' has exited with code 0 (0x0)
Regards
PaalHi Paleri,
According to the
thread which has the same error message, the issue may be caused by incorrect RCF settings. Could you double check your RCF connection configurations such as DNS settings?
If it is not the case, please also make sure you have installed the correct version of Microsoft Connector for SAP BW.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/e2fbafe5-d9df-490a-bfad-3d4b9784a8ea/sap-bi-connector-for-ssis-2008?forum=sqlintegrationservices
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support
Maybe you are looking for
-
Quick: 2 page per sheet print
Hi, Can't seem to get my head around this one. I have a landscape format (a5) and I would like to print 2 page per sheet so it becomes a a4. without changing the document size to a4. quick answer very appreciated.
-
Why should we go for ODI?
Hi, I know the Informatica 9.1.0. Now , I am learning ODI so getting some questions. I am working with the Hyperion & ODI is used with the hyperion to fetch data from any source system. I have few questions in my mind related to ODI. why should I go
-
When moving notes, iPod not found
Hello, I like to put notes on my 4th gen iPod by dragging them into the notes folder under the iPod shown in My Computer. Unfortunately, this icon is only there when I'm syncing my music in iTunes. So, for every note I want transfered I have to click
-
Adobe Illustrator CS 6 slow by saving great documents.
Why is Adobe Illustrator CS 6 so slow when I want save a document with many and great images. Very much slower than Freehand. What do I wrong? Are my settings not good?
-
Partial patching has been done by the SCCM
Dear all, We have done our monthly patching and after that we identified as partial patching has been done on the servers and we are unable to find how it happened. where i can check the logs for it. i have check ccm logs update deployment, update ha