Connection to server has failed on my email account, why ?

connection to email has failed although I have a strong wifi connection, why

I have exactly the same problem.
I exchanged my iphone 4 to a 4S at the Apple store with data uploaded via icloud.
I am connected to the internet and all my email accounts operate accept for one gmail account that gets the message "The connection to the server failed".
I can access the account from my ipad but not fron the iphone. The other Gmail account operates perfectly. I can still use my old iphone to access this gmail account. It is just that it will not work on the new iphone 4S. I have made settings the same in both iphones. HELP

Similar Messages

  • I have internet connection but my incoming email does not appear.  When I try to access new email it says, " connection to server has failed"  Help

    I have internet connection but myh incoming email does not appear.  When I try to access new emails it says, "connection to server has failed".  Help

    What did your email provider say about it when you contacted them?

  • How to resolve "connection to server has failed"?

    How do you resolve "connection to server has failed" when you access your email.

    Quit the mail app completely and reboot the iPad.
    From yoyr home screen - Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the mail app. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    Launch mail again and see of you can access your email.
    If that doesn't work, turn mail off, restart your iPad, turn mail on again and try again. Settings>Mail, Contacts, Calendars>Your email account>Mail>Off. After you restart the iPad, follow that route back to turn mail on again.

  • TS3899 the connection to server has failed

    I have tried deleted the email accounts registered to both my phone and ipad and reinstalling them. I've also switched off both devices by the hard reset. I've deleted all of my mail and I am still getting this 'the connection to server has failed' when i go into the mail app, and when i try to send an email it doesnt allow me either. I am not a techie - what else can i do?

    Hello Madi_kay2030,
    I recommend this article to help troubleshoot what might be happening.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/ts3899
    The symptoms described a a bit different than what you describe but the troubleshooting is relevant.
    Restart the iOS device.
    Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
    Try an alternative Internet connection.
    If your email is provided by your Internet provider, try connecting from the home network.
    If your iOS device has an active cellular data plan, try to disable Wi-Fi:  Tap Settings > Wi-Fi and turn off Wi-Fi.
    If not, try a different Wi-Fi network.
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
    If you're still unable to send or receive email, contact your email provider and verify the account settings are correct. You will need to gather this information (PDF).
    Additional Information
    Using more than one device to check the same POP email account may create a lock-out issue that is easily resolved.
    Regards,
    Sterling

  • DTW - Connection to server has failed

    I am trying to use DTW to import to SAP B1 2007A SP:00  PL:15 and am getting a "Connection to server has failed" error message - error code 100000000008, Licence does not exist.

    Ian,
    Make sure the SAP license server is running. You can check this in the Service Manager running on the Task Bar.  If not go to All programs > SAP folder  > Server Tools > Service manager.
    Also check the user id you are using to log into DTW has the license set inside SAP.
    Suda

  • Cannot get mail the connection to server has failed

    cannot get mail - the connection to server ha failed

    Ensure you have a active interenet connection, once thats verified and the problem still exists. Go into settings>Mail,Contacts,Calender click on the account in question, delete it, then re-add it.

  • TS3899 I am unable to view my Mail box on my ipad and my iphone, it keeps popping up with a message saying "connection to server has failed" Can anyone help?

    This has only happened since I started using Icloud on my Ipad and Iphone!

    Hi lukioxx!
    You may need to try troubleshooting this issue according to the troubleshooting steps found in the following article:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • HT1430 .my email keeps saying the connection to the server has failed.please help

    My email keeps sayig the connection to the server has failed.

    Who is your email provider? Have you checked with them to make sure you're using the correct settings when setting up an account on a mobile device? And what does auto-browsing have to do with using email?

  • TS3899 I keep trying to update my mail inbox but keep being told connection to the server has failed.

    I keep trying to update my mail inbox but keep being told connection to the server has failed.

    Quit the maill app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or go to Settings>Mail, Contacts, Calendars>Your email account >Mail>Off. Restart the iPad and go back to settings and turn mail on again and see if that works.
    Or try this as well ....Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • How to solve "connection to the server has failed"

    Keep getting the following message - connection to the server has failed. So now unable to send or recieve E Mails

    in Settings > Mail, Contacts, Calendars > Accounts check that the settings for the problem account are correct according to what your email provider requires.
    In you still have problems try deleting the account and reinstalling it.
    Also check, of course, to make sure that your e-mail provider has not been having technical problems.

  • Help My Iphone 3GS the hotmail has stopped working and my contacts and the calendar no longer hook up to it  it keeps saying the connection to the server has failed and it running the latest 5ios

    Hi please help I have an Iphone 3 G S it is using the  5.1.1 ios upgrade which it has had for sometime although there was a minor update last evening ? My phone worked fine until arround 1 pm today then it stopped getting mail from my hotmail account along with the hotmail I am not longer able to see any updates to my calendar and most of my contacts have dissapeared. I have tried reconfiguring the hotmail account, deleating it, and putting it back on, and changing the password but none of these has worked. I know hotmail is working from my computer and it also working from another app I downloaded to the phone just now ( mail pro)  but it still says connection to the server has failed?
    Thanks so much

    Click on your Hotmail account in Settings, click on the blue arrow and Forget this Network and try signing in again.

  • Every time I try to access my email on my iPad it says "cannot access mail, server has failed" Anyone know what I need to do?

    Every time now I try to access my email on my iPad it says "cannot access email the server has failed" Anyone know what I need to do to fix it?

    Hello sandy1972
    Check out the article below to troubleshoot issues with accessing your email on your iPad. Make sure that the settings are correct for your email address if you are using on that you set up yourself.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Mail Settings Lookup
    https://ssl.apple.com/support/mail-settings-lookup/
    Regards,
    -Norm G.

  • Adf input file - connection to the server has failed(status=unknown)

    We are using input file component to upload an excel file and read it. Sometimes we are getting error - " A Connection to the server has failed. (status=unknown) " when we click on browse and add the file. We are getting this error when we just add the file. We are not doing any operation while adding the file. After the file is added, we have a submit button to do post operations on file. But we are getting this error immediately after we add the file. JDeveloper version 11.1.1.5.0.
    Any inputs will help us.
    Edited by: adf_forum on May 23, 2013 5:24 PM

    Hi,
    there must be a stack trace in the log files that gives you more information about this. Chances are the browser closes the socket connection, which you can verify by using another browser and avoiding e.g. VPN connect for testing. Another test to perform is to try 11.1.1.7 and see if this works for the use case in case you sit on a known and already fixed problem
    Frank

  • Internet Explorer:A Connection to the server has failed (status=12152)

    I am getting "A Connection to the server has failed (status=12152)" error in my adf application when using Internet Explorer. The application is deployed on a hosted server with SSL.
    This seems to happen randomly. After clicking on "OK" and the action is correctly performed again. I don't have this issue in Firefox.
    There are no error messages in the server logs.
    Can you please let me know how to fix this issue.
    ADF:11.1.1.6
    WLS: 10.3
    Thanks
    Shobana

    Hi,
    I am experiencing the same problem.
    Can anyone help?
    Thanks.

  • "A connection to the server has failed" occurs in 3 minitues

    I have deployed a web application(ADF) that inserts batch of records(over 50k) to the DB and client is expected to wait for the response.
    But after client invoke the insert browser produce "A connection to the server has failed" java script error exactly after 3 minutes.
    So the connection between client and Web Logic 10.3 is failing. Insert to DB continues to work.
    Is this due to a timeout, why this error comes? How to configure web logic to avoid this.
    -Prasad

    PR,
    You've been given some advice on the ADF forum in terms of how to deal with this (e.g., make the process asynchronous and use an af:poll/af:progressBar to keep the user informed).
    Expecting a single HTTP request to work without timing out when you insert 50,000 rows one-by-one into the database is unrealistic.
    John

Maybe you are looking for

  • Synchronous bpm scenario

    Hi All, I am doing scenario in which my sender ORION is webservice (It is synchronous to synchronous scenario) I have to use bpm for this, We are receiving webservice in XI and sending it to another PI system where i m doing soap look up (request,res

  • Problem after installing BI Publisher MS word Plug in 2010, Windows OS 7, BI Pub version 11.1.1.5

    Hi, OS:- Windows 7 Bi Publisher :- 11.1.1.5 Microsoft Office Version:- 2010 I had downloaded the template builder for word from the home page of the BI Publisher. I installed the template builder for word by running as administrator. After the instal

  • Osx lion upgrade - computer boot VERY slow

    after upgrade to OSX Lion, my computers boot very slowly.  they also have a hard time waking from "sleep", sometimes running fans then going back to sleep again.  disk verified, permissions repaired before and after install.  any ideas?  it's happeni

  • Thumbnail Image in Content Viewer?

    I'm using the free account setup, and wondering how I can get a thumbnail image of my magazine cover in the Content Viewer.  I'm ok with the lightning bolt going across the tumbnail, but I can't find any instruction how to acheive this. Suggestions?

  • Cannot install Elements on Windows 8.1.

    It was working flawlessly on my Windows 7 64bit. When tryiung to install, I receive the message "You need Internet Explorer or higher". I have tryed a Clean Initialization on Windows 81., no success. Thanks for any help.