Connection to Solaris7 fails

When tying to connect to my system from outside its network, the connection fails. What do you think can be the possible reasons, in relation to the parent domain, that caused it ?

Hello,
Before we can solve your problem, can you tell us the exact output of the system you are trying to connect to?
If it says something like "Not on system console" you need to edit your /etc/system file and comment out the CONSOLE= variable. If this line does not have a # placed in front of it, the system will not allow you to remotely login unless you are on the actual system console.
Regards,
Allen - Sun DTS

Similar Messages

  • Cannot get maile connection to server failed

    followed the instructions for icloud set up in apple support for ipad and iphone even deleted the account and then set the account up with the correct ID and password.  I do use a different ID  than my apple ID for my icloud account.  I use my me.com email address.  I can get into the cloud on my pc and I can send and recieve email when I log into my icloud account but this fails to work on my ipad and iphone.  Attempts to seen or get email on these devices when on a wifi network end up with the message "cannot get mail connection to server failed"
    lee

    Hi HLSdoc,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iCloud: Troubleshooting iCloud Mail
    http://support.apple.com/kb/ts4002
    Issues sending or receiving mail on iPhone, iPad, or iPod touch
    Best of luck,
    Mario

  • "Connection to server failed" error with Gmail exchange server

    Hi,
    I upgraded my iPhone 4 to iOS 4.3 on Friday and now I can't access my Gmail account using the Microsoft Exchange settings, I just get a "Connection to server failed" error.
    I also have a Google Apps email account for my website and I am able to access it using exchange... it's just my regular Gmail account that I can't access (and that's where all my contacts are stored).
    I can access the account using the regular Gmail email settings but that doesn't sync my contacts over the air, which is the advantage of using Exchange that I love the most.
    I don't know if it is related or not, but I had a really hard time upgrading to iOS 4.3. I guess the update file was corrupt and it put my phone into restore mode. I had to use a different computer for the upgrade to finally work. Because I was using a different computer I had to restore it as a new phone rather than restoring from a backup, so maybe that has something to do with my email problem.
    Message was edited by: KJones75

    I seem to have solved the problem. I deleted my Gmail account from the phone and then changed my Gmail password from my computer, and then tried adding the account to my phone again... and surprise, surprise, it worked.
    I'm not sure why changing the password fixed the problem, but I'm glad it's working again.

  • I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    If nothing above helped, restart your router.
    No data is lost due to a reset.

  • Toshiba EXCITE Pro - WIFI connection. Authentication failed after update

    Hello.
    Just received this Tablet.
    Everything seemed ok while updating to the latest version (did that first to solve the heat problems).
    After the last update *i lost my WIfi connection. Authentication failed* (didnt change something - was connecting - updating ok 1 minute before the last update).
    After that i started testing ,Wps connection , No security Wifi etc etc.
    *Finally at a random time (and with the initial settings) i got connected*. After i shut down the tablet the same problem occured.
    After doing the same things again i finally got connected and this time it seems to be ok, even after i shut down the tablet.
    However this is frustrating.
    Maybe you have to sort this out?
    I have seen and other people returning this tablet after having this problem.
    It is not a hardware problem since its working ok before the update.
    Of course tried factory reset twice.
    Hope i dont have this problem again, *but i am informing in hope that you fix this in a future update.*

    Toshiba sent me the fix for this. Figured I would use Facebook and they sorted a solution straight away.
    It requires a complete reset. Not the soft reset from within Android.
    I'll post it here as they will check through moderation I guess.
    Thanks for sending a private message Ben. For us to get this resolved for you we would advise to perform a reset from the Android system recovery menu, to do the reset please follow these steps:
    The reset process will delete any data, settings, and applications on your tablet. You must have a backup of any data you wish to keep before proceeding.
    1. Make sure the tablet is off and not in standby.
    2. Hold down the Volume Up and Power buttons simultaneously until the two Android icons appear.
    3. Use the volume buttons to select the white box on the right.
    4. Once selected, press the power button.
    5. Use the volume buttons to select wipe cache partition and then press the power button.
    6. Select Yes and press the power button.
    7. Use the volume buttons to select wipe data/factory reset and then press the power button.
    8. Select Yes and press the power button.
    9. The tablet will now reset.
    If you have any issues after the reset please get back to us as soon as possible!
    Its been working well ever since. I guess the cache clean part might be the main one. You'll have to select the reboot yourself as I did at the end.
    Might be best to use Facebook i'll see if I can find my post as the response was quick and efficient unlike their responses in here. I.e nowt from them so far.
    They needed my name and serial numbers probably to log problems etc.
    Message was edited by: bensimmo

  • Connect to database failed,rc=-10709 Connection failed (RTE:Database name)

    Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
    System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
    When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
    trc file: "dev_w0", trc level: 1, release: "701"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Mon May 16 23:57:31 2011
    B  create_con (con_name=R/3)
    B  Loading DB library '
    sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
    B  Library '
    sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
    B  Version of '
    sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
    B  New connection 0 created
    M sysno      00
    M sid        SED
    M systemid   562 (PC with Windows NT)
    M relno      7010
    M patchlevel 0
    M patchno    32
    M intno      20020600
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        212
    M
    M  kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c   1348]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          22784     (1752)
    M  DpShMCreate: sizeof(tm_adm)          5912704     (29416)
    M  DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)          552080     (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1864)
    M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000B2C0050, size: 6607136)
    M  DpShMCreate: allocated sys_adm at 000000000B2C0050
    M  DpShMCreate: allocated wp_adm at 000000000B2C2270
    M  DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
    M  DpShMCreate: allocated tm_adm at 000000000B2C7BD0
    M  DpShMCreate: allocated wp_ca_adm at 000000000B86B450
    M  DpShMCreate: allocated appc_ca_adm at 000000000B871250
    M  DpShMCreate: allocated comm_adm at 000000000B873190
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
    M  DpShMCreate: allocated gw_adm at 000000000B8F9EA0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000000B8F9ED0
    M  DpShMCreate: allocated wall_adm at 000000000B8F9EE0
    M 
    M Mon May 16 23:57:32 2011
    M  rdisp/queue_size_check_value :  -> off
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host sirillium1
    M 
    M Mon May 16 23:57:33 2011
    M  calling db_connect ...
    C 
    C  DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
    C  MAXDB shared library (dbsdbslib) patchlevels (last 10)
    C    (0.024) Default value for max. input variables is 2000 (note 655018)
    C    (0.024) Profile parameter to define max. input variables (note 655018)
    C    (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
    C    (0.024) Input parameters for SQL statements increased (note 655018)
    C    (0.018) Create index serial for MaxDB 7.6 (note 1267841)
    C    (0.018) More trace in case of packed to string conversion error (note 1262799)
    C    (0.016) R3trans export aborts with signal 6 (note 1262245)
    C    (0.009) IA64 alignment errors (note 1245982)
    C    (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
    C 
    C 
    C  Loading SQLDBC client runtime ...
    C  SQLDBC SDK Version : SQLDBC.H  7.6.0    BUILD 007-123-091-175
    C  SQLDBC Library Version : libSQLDBC 7.6.5    BUILD 015-123-202-938
    C  SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
    C  SQLDBC supports new DECIMAL interface : 0
    C  SQLDBC supports VARIABLE INPUT data   : 1
    C  SQLDBC supports keepAlive indicator   : 0
    C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3
    C  Try to connect (DEFAULT) on connection 0 ...
    C  *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
    [dbsdbsql.cpp 137]
    B  ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1203] [dbsh    1203 ]
    B  ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1449]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10563]
    M 
    M  Info for wp 0
    M 
    M    pid = 212
    M    severity = 0
    M    status = 0
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon May 16 23:57:33 2011
    M  *  RELEASE     701
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10783
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   723]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c   334]
    We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
    XUSER Entry  1
    Key         :DEFAULT          
    Username    :SAPSID                                                         
    UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
    Password    :?????????
    PasswordUCS2:?????????
    Dbname      :SID              
    Nodename    :server1                                                     
    Sqlmode     :SAPR3  
    Cachelimit  :-1
    Timeout    
    Isolation  
    Charset     :<unspecified>    
    XUSER Entry  2
    Key         :c                
    Username    :CONTROL                                                        
    UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
    Password    :?????????
    PasswordUCS2:?????????
    Dbname      :SID              
    Nodename    :server1                                                     
    Sqlmode     :INTERNAL
    Cachelimit  :-1
    Timeout     :-1
    Isolation   :-1
    Charset     :<unspecified>    
    XUSER Entry  3
    Key         :c_J2EE           
    Username    :CONTROL                                                        
    UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
    Password    :?????????
    PasswordUCS2:?????????
    Dbname      :SID              
    Nodename    :server1                                                     
    Sqlmode     :SAPR3  
    Cachelimit  :-1
    Timeout    
    Isolation  
    Charset     :<unspecified>    
    XUSER Entry  4
    Key         :w                
    Username    :SUPERDBA                                                       
    UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
    Password    :?????????
    PasswordUCS2:?????????
    Dbname      :SID              
    Nodename    :server1                                                     
    Sqlmode     :INTERNAL
    Cachelimit  :-1
    Timeout     :-1
    Isolation   :-1
    Charset     :<unspecified>    
    Any idea? we are out of ideas at this moment.
    Regards
    Edited by: Gustavo Goicochea on May 17, 2011 6:37 PM

    Natalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
    We update kernel to release 142
    R3trans -d and -x exit with (all with user SIDADM)
    SVERS table does exist and belongs to SAPSID
    dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
    OK
    END
    'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
    Why it still says that SVERS table does not exist and SQL error 942?
    C  Now I'm connected to SAP DB
    C  00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
    B  Connection 0 opened (DBSL handle 0)
    C  *** ERROR =>   prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
    dbsdbsql.cpp 1604]
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp  7253]
    C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS                        
    C  SELECT VERSION INTO ? FROM SVERS  ;
    B  ***LOG BZA=> table SVERS      does not exist on database            [dblink#4 @ 1301] [dblink  1301 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1515]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10824]
    M 
    Users seem to be ok
    dbmcli on SID>sql_execute SELECT username, usermode FROM users
    OK
    END
    'CONTROL';'ADMIN'
    'SUPERDBA';'SYSDBA'
    'SAPSID';'DBA'
    'SAPR3';'DBA'
    User SAPR3 does not have anything on database
    dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
    ERR
    -24988,ERR_SQL: SQL error
    100,Row not found
    Any idea?
    regards

  • TS1424 Message saying...Connection Manager invoke failed to find service connection URL why?

    When I go to sign in it iTunes a message comes up stating:  Connection Manager::invoke::Failed to find service connection url.  Does anyone know what this means and how to fix this issue?

    Check over on the right side of the thread here under More Like This. Look for one that has a green checkmark which means it is answered. I have read of this however, I do not know how to solve it. It seems as though it is one particular carrier this happens to.

  • TS1424 Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url"  After this occured a few times I reset the id password, and this was confirmed by email.  It still fails with same message.  I

    Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url"  After this occured a few times I reset the id password, and this was confirmed by email.  It still fails with same message.  Ideas?

    Hi, you have to logout from your iTunes account and reconnect it:
    Settings / iTunes & App Stores / ...
    https://mobilfunkexperten.de/news/13450/sporadische-probleme-im-itunes-und-app-s tore
    Hope this helps... :-)

  • HT1527 Whenever I try to redeem a card or access my account I get a message "connection manager invoke failed to find service connection url".  I reset my password, logged out and tried logging back in, same message.  How do I solve this issue?

    Whenever I try to log in to my account or redeem gift cards, I get a message saying "Connection Manager Invoke Failed to find a service connection url".  I changed my password, logged out and the same thing keeps happening.  Does anyone have a solution for this?

    Hello,
    Try to go to the settings on your phone... Settings > Store > Click your Apple ID: And sign out from your account, then sign in again .... This solved the problem for me on my iPhone 4s

  • I can't log on to itunes account. Keep getting the error: Connection Manager::invoke::Failed to find service connection url. What can I do?

    I can't log on to my itunes account. Keep getting the error: "Connection Manager::invoke::Failed to find service connection url". What can I do?

    Hi, Buster1932.
    I would recommend logging out of your account then logging back in.  If the issue persists, see the article below. 
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

  • When I tr yo buy an app I put in my password an this comes up: Connection manager::invoke:: failed to find service connection URL.

    When I tr yo buy an app I put in my password an this comes up: Connection manager::invoke:: failed to find service connection URL. What do I do??

    Try this:
    I would recommend logging out of your account then logging back in.  If the issue persists, see the article below. 
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297

  • Laptop to internet ok. Iphone to internet "connection to server failed"

    Laptop to internet ok. Iphone to internet "connection to internet failed" can someone help me fix this?

    I think bluetooth should be upgraded to allow to use
    iPhone to connect to the Internet with any laptop
    (i.e. Powerbooks or MacBooks), this is the only
    feature I am really missing with the iPhone! Do you
    think will be any software upgrade or third party
    software allowing to do that? Thanks for sharing.
    Wireless access from the iPhone is $20 a month. AT&T's unlimited access for laptops is $80 a month, and for other devices (PDAs, Blackberry, etc; the TOS forbids you to use the PDA as a wireless modem for a laptop) is $50 a month. Thus, if the iPhone COULD be used as a modem it would undercut all of the other wireless data services.
    Anyway, you wouldn't really want wireless laptop access over EDGE; believe me, I've tried it. If you really need wireless access get a 3G aircard with a separate data plan. It's really worth the price to have DSL speeds over the cellular network.
    best,
    Larry
    Lenovo T-60   Windows XP Pro   Intel iMac, Dell Ubuntu Linux

  • How to diagnose, resolve Wiki's "Connection to DB failed"

    I get the following response when I go to my Wiki on OS X Server 10.9.1:-
    Caught exception "Connection to DB failed" [CSDatabaseError] executing route /app-context/wiki/:
         0   CoreFoundation                      0x00007fff8864841c __exceptionPreprocess + 172
         1   libobjc.A.dylib                     0x00007fff9276de75 objc_exception_throw + 43
         2   CSService                           0x00000001011afc8d -[CSConnectionPool openConnection] + 3309
         3   CSService                           0x00000001011b065a -[CSConnectionPool currentConnection] + 98
         4   CSService                           0x000000010123fb09 -[CSAuthService unauthenticatedSession] + 82
         5   CSService                           0x00000001012400e3 -[CSAuthService currentOrNewSession] + 154
         6   CSService                           0x0000000101230311 +[CSHTTPRouteHelper setCurrentSessionForRequest:] + 264
         7   CSService                           0x0000000101245d0a __27-[CSAppContextService init]_block_invoke238 + 107
         8   CSService                           0x000000010122be6a __53-[CSRoutingHTTPConnection httpResponseForMethod:URI:]_block_invoke + 95
         9   CSService                           0x000000010122f40b -[CSHTTPBackgroundResponse bounce:] + 286
         10  Foundation                          0x00007fff8e2f570b __NSThread__main__ + 1318
         11  libsystem_pthread.dylib             0x00007fff8e155899 _pthread_body + 138
         12  libsystem_pthread.dylib             0x00007fff8e15572a _pthread_struct_init + 0
         13  libsystem_pthread.dylib             0x00007fff8e159fc9 thread_start + 13
    There is another thread mentioning a similar problem, the poster resolved the problem without giving out the details. It was dated Oct 2013.
    The last change on my server was a Java 7 update install and system reboot.
    In trying to get a grip on the problem I have tried the following. Look at the logs via Server.app. Looks like connection failure is happening every 10s. Looked at ps aux | grep -i postgres  and listed layout of /Applications/Server.app/Contents/ServerRoot using find
    At this stage, my guess is a configuration detail for postgres is wrong and I am looking for it. Any suggestions, a fix, appreciated.

    1. The wiki admin log is as follows:-
    Jan 20 03:15:06 x.y.z.a wikiadmin[25558] : [PGCConnection.m:619 75514310 +0ms] -[PGCConnection close] Jan 20 03:15:06 x.y.z.a wikiadmin[25558] : [PGCConnection.m:619 75514310 +1ms] -[PGCConnection close] Jan 21 00:00:05 x.y.z.a wikiadmin[41411] : [SQLStats.m:54 76e7b310 +0ms] Gathering 28 SQL stats and 0 block stats Jan 21 00:00:05 x.y.z.a wikiadmin[41411] : [CSConfig.m:55 76e7b310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist Jan 21 00:00:05 x.y.z.a wikiadmin[41411] : [PGCConnection.m:63 76e7b310 +0ms] -[PGCConnection connect] with [host='/Library/Server/Wiki/PostgresSocket' user=collab dbname=collab] Jan 21 00:00:05 x.y.z.a wikiadmin[41411] : [PGCConnection.m:619 76e7b310 +2ms] -[PGCConnection close] Jan 21 00:00:05 x.y.z.a wikiadmin[41411] : [SQLStats.m:66 76e7b310 +0ms] Can't connect to DB, skipping stats: could not connect to server: Connection refused           Is the server running locally and accepting           connections on Unix domain socket "/Library/Server/Wiki/PostgresSocket/.s.PGSQL.5432"?       [PGCConnectionError] Jan 22 00:00:03 x.y.z.a wikiadmin[12001] : [SQLStats.m:54 76e7b310 +0ms] Gathering 28 SQL stats and 0 block stats Jan 22 00:00:03 x.y.z.a wikiadmin[12001] : [CSConfig.m:55 76e7b310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist Jan 22 00:00:03 x.y.z.a wikiadmin[12001] : [PGCConnection.m:63 76e7b310 +0ms] -[PGCConnection connect] with [host='/Library/Server/Wiki/PostgresSocket' user=collab dbname=collab] Jan 22 00:00:03 x.y.z.a wikiadmin[12001] : [PGCConnection.m:619 76e7b310 +0ms] -[PGCConnection close] Jan 22 00:00:03 x.y.z.a wikiadmin[12001] : [SQLStats.m:66 76e7b310 +0ms] Can't connect to DB, skipping stats: could not connect to server: Connection refused           Is the server running locally and accepting           connections on Unix domain socket "/Library/Server/Wiki/PostgresSocket/.s.PGSQL.5432"?       [PGCConnectionError]
    2. Thanks for suggesting wikiadmin, will go there to see what can be discovered.
    a. I intend to get the Disk Utility to check and correct file permissions if any are wrong. Software updates sometimes get the file permissions wrong.
    b. I discover the partition for the Mac OS X is almost full at 250Gb with 16Mb to spare.

  • In Notification Center, Whenever I try to send a tweet I get the "tweet cannot be sent because connection to Twitter failed error" What do I do? This is happening on 10.9 Mavericks

    I see that Apple has had the same issue in 10.8 since I read   http://article.wn.com/view/2013/03/21/Fix_Connection_to_Twitter_failed_when_twee ting_from_OS_X/. But I'm not sure what to do now since I have not been able to find a fix for 10.9 Mavericks

    Try reading this article. It might help you: http://www.cnet.com/how-to/fix-connection-to-twitter-failed-when-tweeting-from-o s-x/
    Thank you!

  • The tweet "..." cannot be sent because the connection to Twitter failed

    I've been attempting to use the built in twitter functionality to post photos, however the title error message keeps popping up! I have deleted the account setings from the phone and reinstalled Twitter as suggested on the Twitter support blog for some iPhone issues - but still no luck.
    I can add the account and verify it under 'Settings -> Twitter' and use any other Twitter apps without an issue, just I can't tweet from iOS!
    Has anyone else had this issue?

    My Tweets are posting properly from my IPAD Air, however, I get the error message referenced above when trying to do the same exact action from my Iphone 5S.  I try to send the Tweet and it says:  Cannot Send Tweet - The tweet "article name" cannot be sent because the connection to Twitter failed.  But when I take the same exact action from my IPAD Air, the tweet posts properly to Twitter.  Any recommended fixes here?

Maybe you are looking for