Connection to the Internet via LT2P
I need to connect my airport express to the Internet via VPN (LT2P). How am I able to do it?) looking forward to find out an answer ;)
Google wifi standards for full detaisl
in short b g n are simply oldest to newest b oldest n newest ieee (Institute of Electrical and Electronic Engineers ) defined standards main advantage of an should be greater range and speed
the hub however is not fully n and hub2 a have poor range on n I find g better for the hub 2 a
could be a security pass word problem on the new laptop
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me
Similar Messages
-
K7n2 delta, won't allow me to connect to the internet via pci modem
motherboard: K7n2 delta, nforce2 ultra
won't allow me to connect to the internet via pci modem
i have got 2 computers with same mobo, can connnect through external 56k
but the 2 internal 56ks (one in each computer), will not connect.
just dials then beeps, or no dialing tone.
the 2 internal ones are differnet makes, but connect through PCI
there must be something wrong with Mobo settings or pci stuff
all internet and modem settings are correct, etc etc etc
can u help
or does anyone have a pci 56k running on that mobo?Quote
Originally posted by Solway
i made my creative one work and dial, using pulse dialing, but it takes ages
but my other one has no dialing tone, its werid.
If your not hearing dial tone you might have your phone plugged into the wrong port. Most modems have 2 outlets, one is labeled line ( that is the one you should have plugged into the jack (RJ11C). If that's correct, query the modem and see if it tests OK, you may have a defective modem. -
My iphone 5 won't make a call when i fail to connect to the internet via 3g
My iphone 5 won't call when i fail to connect to the internet via 3g.
At work i dont have wifi i have 3g, if i launch say the sky go app,or the iplayer, sometimes they work and everything is fine...sometimes they wont load as 3g for whatever reason cant get a connection at that particular time........ if i then try and make a call the call will fail. I've experimented 25 + times and this is definately the cause.
(note: when the 3g connection does work, the phone has absolutely no problem calling people)
Anyone had this problem?
Even better has anyone got a solution?
Thanks,
Nick.Are you sure that the carrier's signal is strong where you are having this problem? Certain building structures and locations have poor cellular signal strength and this often results in the "No Service" indication. Are other users able to get service in the same locations where you have problems?
-
My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?
Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
Macbook Pro suddenly will not connect to the internet via ethernet cable.
I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues. -
On my new MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks. This also happens on a website editor. But, when I am connected to the internet via Wifi, everything load properly. This is my work computer, so I have to be able to connect through the Ethernet cable to access everything. Please help me!
I mostly use Safari. But I also tried it on Firefox, Mozilla, and Camino. Mac OS X. It's my work computer, so I've only tried it at the office. I have to be connected through the Ethernet cable to access my files and email on the server.
-
I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect" yet my computer is connected with a strong signal. I checked to make sure IE is not off line. Any suggestions please?
Try using a different browser as a test.
-
Connecting to the internet via PC Suite / N95 8GB ...
I'm struggling to connect to the internet via PC Suite (v7.1.30.9), using Vista Ultimate SP2, repeatedly getting the error "Failed to connect to the network! One touch access could not connect to the selected device". I've tried different cables, checked for PC Suite updates, updated the phone's software, etc, but all to no avail. (I am able to connect immediately using my N80, so the problem seems to be on the N95 8GB). The rest of the PC Suite connection seems fine. Can anyone help me?
I found a situation where your error message appears. It is the case when the nokia is connected using the data transfer mode and simultaneously the OneTouch Application is started. Then the device is not recognized by the modem software. The PC Suite mode is required for the OneTouch Application.
In my situation I think I already saw all of the possible error messages described in the documentation during the various experiments.
For example I tried to uninstall and reinstall the cable drivers. Unfortunately the driver page of N95 8GB does not include them only the page of N95. This was a step towards success - what concerns the OneTouch Application.
Sometimes it is useful to switch off and on the phone, specially when it is not possible to connect with the modem driver.
In my opinion the possibility of completly uninstalling the Nokia Suite is missing. You can uninstall all parts but after reinstallation the Nokia Phone Browser is no more available, the icon is not displayed. All the software packages are working fine even the modem drivers but not the Phone Browser.
Franz -
Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi (this connection is working on other devices) has anyone else had the same issues, works fine with BigPond Wifi
and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!! -
Does my airport have to be connected to the internet via modem for my mac to see it?
my imac, macbook, or air wont pic up my airport. should the airport be connected to the internet via modem first?? i have not connected my internet line yet, but once i click on airport utilities it says rescan. all software up to date. **** i suck at this stuff. thx!
Yes, The phone needs an active data connection, either through WiFi or Cellular data.
-
I always wondered why we need a cellular network with a special service plan to connect to the internet via a BlackBerry smartphone? This problem is not occuring on smartphones of other brands. Can anyone please explain this to me?
HasantaHello,
The reason is that, with legacy (e.g., pre-BB10) devices, the device itself does not do all of the work to provide you with your services. Rather, there is infrastructure (BlackBerry Internet Service - BIS) hosted at the carriers/BlackBerry that provides linkages between your device and certain services. This includes, among many things, email...unlike non-BB smartphones, the BlackBerry on-device email client is not a "full" email client; it depends on BIS in order to provide the "push" email capability that BBs rely on.
This BIS infrastructure is unique to BlackBerry, and only services BB users. Hence, it costs extra for the carriers to provide services for BB users, and therefore they can demand from their BB users a higher cost dedicated service plan so as to enable those proprietary services for the BB users. (In some markets, there is no extra charge for BIS...but the requirement for BIS nevertheless remains in all markets for legacy BB users.)
So, this is not a "problem" per se...but rather a difference between BlackBerry devices/services and others. One could instead think of it as a "market discriminator", favoring BlackBerry (only for those who desire such, of course).
With BB10 (Z10, Q10, Q5), BIS has been eliminated btw.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I had an app which disables an iPhone to connect to the internet via mobile network. In the meantime I have deleted that app but it still affects my phone. For example iPhone shows that 3G sign on the top (next to the time) but it is unable to open any website. Is there anything I can do about it?
What was the app you are referring to? I'm not aware of anything on the app store that is designed to do that, unless you're talking about an app that was causing a problem...
Was/is your phone jailbroken? -
Curve 9380 unable to connect to the internet via wifi
I'm using curve 9380 and unable to connect to the internet via my home wifi, there is no blackberry logo beside the wifi signal symbol. I don't have this probelm if I'm using my laptop or curve 8520 to connect to the internet via the same wifi router. Please help. Thank you.
Check firewall, if you're on wifi then try ethernet to rule out interference. It is likely a network issue.
-
Normally I have my IMac, I-Pad and Windows Laptop all working on my home network via wi-fi. This week I find that I cannot access the inetrnet on my IMac or I-pad via wi-fi but I can connect to the internet via wi-fi with my windows based laptop.
The airport diagnostics (reds/yellows) indcate that I am connected
I can access the internet if I plug my IMac into the router via an ethernet cable
I have restarted the IMac and the I-Pad, rebooted the router and created a new network. None of these changes has made a difference. Does anyone have any ideas please?You have not completed your profile so we cannot assist you. In your profile you will indicate critical information such as what version of OS X is installed on your computer and the computer's configuration. If you do not know how to complete your profile please click Profile Update
-
Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work. Any ideas without needing to reset the ipod?
- Have you tried when connected to other networks? Maybe the router is blocking the ports used by Safari and the other apps.
- What kind of network are you using? a personel or bussines?
Maybe you are looking for
-
How do I find music I downloaded from a cd on my iTunes library?
So about 2 years ago I downloaded a CD onto on my iTunes and iPad from my computer. I recently got an iPhone and after I logged into icloud, all my music showed up except for the songs on the CD. I went on my laptop and went to my music library and t
-
My ipod touch 5th generation isn't working properly.
I was recently on an app called Cinemagraph and was logged in. After a while, I turned off my ipodtouch and then attempted to turn it on, but it didn't. I presssed the home button to activate Siri, and then appeared back on my lock screen. I typed in
-
Hi I tried to use graphic styles to save the states of an menu-enty or a input field - and failed. So it's not possible to safe different states in one graphic style?
-
SCOM services password required to retype everytime restart the services
Hi, Everytime i restart the server center configuration service and system center data access service. It will failed to restart and prompt out password error message. I need to retype the same password and hit Apply then it will prompted with a dial
-
Elements 7 - Where are my pen tablet options???
Hi. I use a Wacom Bamboo pen tablet for editing my pictures on my Notebook. OS is Windows Vista Home Premium. In the editor of PSE 5 I always could adjust tablet-options (for the brush tool for example). Now that I updatet to PSE 7 these tablet optio