Connection to VPN doesn't work with exclamation mark on Network symbol

Hello everyone,
I'm new to this forum and not really professional in VPN stuff, though I'm an experienced computer user and programmer. I'm using Cisco VPN
5.0.07.0440-k9-x64 from the Paul Scherrer Institute on Windows 8 64-bit. The program was working previously fine, but at some point, whenever I connect to VPN and login, I lose connection to the internet, and nothing related to my internet connection work, and I see an exclamation mark on the wireless network symbol. And when I disconnect the VPN, I get everything back to normal.
I got almost the same problem when I installed Kaspersky Internet Security due to some suspicion on security, but then I removed it and everything was back to normal. After that, the VPN worked for some time, and again didn't work anymore at some point. First thing I tried is disabling the Windows Firewall, and it didn't help.
My network adapter is: Qualcomm Atheros AR9002WB-1NG Wireless Network Adapter
In my network adapter, I can't change the TCP/IP v4 Configuration. When I double click, it says something like: "For the configuration of TCP/IP, there must be a network device installed and activated" (The sentence is translated from German, my Windows is German).
Is there like a "global reset" that would get the VPN to work again? What should I do?
Please advise, and if you require any piece of information, let me know.
Thank you.

I'm using now VPNC on linux. No more cisco! Crappy program and crappy support!

Similar Messages

Automator "Connect to Server" doesn't work with spaces in volume name

I'm trying to use an old Automator Workflow I had set up in Snow Leopard that connected to a list of specified server mounts (both Windows smb:// and Apple afp://). It works fine for most of them, until it hits a mount point that has a space in it, where it fails. Looking at the debug area it looks like it's trying to connect to "smb://Server/Example%20Name" instead of "smb://Server/Example Name" and failing. Yet, when I use the "Connect to Server…" functionality in Finder, the same URL works just fine. Is there any syntax that will make this work correctly in Automator?

As I said I never used this before Lion and I don;t have any smb shares to test on but this is what I've found which may be of help:
The following workflow connects to my MB from an iMac:
Notice that the MB name is administrator's MacBook with a space and an apostrophe. Notice the %chars for the space and the apos so I don't think that the %20 for the space in your case is causing the problem.
When I tried this by entering afp://administrator's MacBook it failed. The error message showed the special chars converted as in the url that worked what was missing was the everything after the _ in the name.
When I did a connect to server in the Finder and selected Recent servers from the pull down and selected administrator's MacBook the url in the action above was shown. I copied the url from the server address line and pasted into the Automater action.
This might be of some help in your case at least it might show if the %20 is really causing the problem.
regards

RVL 200 VPN doesn't work with Windows 7 64

hello partners and experts,
We use the RVL 200 to establish VPN connections. Now we have one PC with windows 7, and there is the problem that there are error-messages when installing the xtunnel. we did it as an administrator.
We use the virtual passage of the router.
The Error Message: virtual passage Install Failed: Error Installing Virtual Passage Adapter!
thanx a lot for your help
Regards
Andreas Pichler

I've nearly the same problem with Windows 7, but also with Vista Buiness. Also using administrator account, IE8, trusted sites, ActiveX enabled ...
Message: Virtual Passage Setup:
Error: Virtual Passage not installed. Please install as administrator.
thx for help, greetings,
Herbert Gerstbauer..

Incoming VPN doesn't work with PAT over DHCP

I have an 1841 that uses PAT for outbound traffic. External Fe0/0 port gets its IP via DHCP.
ip nat inside source route-map NAT-MAP interface FastEthernet0/0 overload
I have an internal server that runs SSH so I have a port forwarding rule on the router:
ip nat inside source static tcp 172.16.32.3 22 interface FastEthernet0/0 22
Now I added VPN pool, but VPN clients cannot reach the server on port 22.
The statement below would fix the problem:
ip nat inside source static tcp 172.16.32.3 22 <STATIC IP> 22 route-map NO_NAT-MAP extendable
If I understand correctly this statement is only available for STATIC IPs, in my case I get the IP from DHCP. Anyone knows a workaround?
thanks!

Resolved!
It appears that he Scientific Atlantic modem than RCN provides needs a hard reset when switching routers. The way to do this is a careful sequence:
1. unplug ethernet to old router
2. unplug coax
3. power off for at least 60 seconds
4. plug in coax
5. power up and check for status lights
6. plug ethernet cable between the Time Capsule and the modem
This time it picked up the DHCP settings and hence works just fine. Phew! So, the problem was not with Apple but with RCN.
Jonathan

Camera connection kit (USB) doesn't work with iPhone 3Gs / Canon EOS 30D

When I plug in my iPhone 3Gs or Canon EOS30D to the camera connection kit via USB the iPad behaves strange: One time nothing happens at all. The other time "photo" starts, showing the "camera" button which disappears immediately after a few seconds. Actually I was only able to import photos when I push the connection kit against the iPad o.o ???
Does anybody has had a similar problem ?

Do you have a case on the iPad the is interfering with getting a good connection? What cable are you using: Is the battery in the camera almost fully charged and is it on the right setting? I could no find any previous discussions on your particular camera but other users have reported not being able to download from some cameras.

VPN doesn't work

I just switched from Cable Internet to Verizon high speed. Internet and e-mail work fine, but my Cisco VPN doesn't work with Verizon.
Thus I can't connect to my servers at work.
I know my VPN works good because I travel alot and it works in every hotel I stay at, in fact I just tried it down the street through WiFi.
Does anyone know the fix for this?

Easy solution......
Bridge mode is achieved by 2 easy steps:
1) - Log into the GUI
click the My Network Icon on top
Click Network Connections on the left
Click on the words "Broadband Connection (DSL)"
Make the Protocol dropdown say "Bridge"
Make the Bridge Mode dropdown say "Bridge"
Save - the unit will reset
2) Log back into the GUI
Click the My Network icon on top
Click Network Connections on the left
Click the on the word "LAN"
Remove the top checkmark (you want to not enable the DHCP Server)
Make sure the modems ip address is not going to be the same of your router
Save
Exit the GUI
I made my modem 192.168.10.1, and my routers lan network is 192.168.0.1
The 6100F is bridged. The internet light will stay out. Whatever the next device on the network is will need to do the PPPoE connection (with your ISP username and password) ex your router
Myk

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

File with exclamation mark and cannot connect

My ipod stopped working. I had a low battery so I charged it. Now when I try to turn it on, it just churns and churns and then the file with exclamation mark comes on the screen. Also, when I try to connect it to my computer, the computer doesn't recognize it.

Unbelieveable, since last Saturday, I needed to fix up 3 iPods with similar problems from family members and friends, 2 connected with PC and 1 with Mac. I guess it will be a good idea if I can share with you all and hope that it can give you some hints when you try to fix yours before sending it for repairing.
Before you do anything I suggest that you should read the following carefully..
http://www.apple.com/support/ipod/index.html
Most problems came from the iPod not being recongzied by the computer (mainly PC and I find it less often with Mac). Second issue is iPod not being charged for quite some time.
I must say that I am not an expert but I did learn something during the past experience on fixing for more than 10 iPods but none of them are shuffle.
The first thing you need to do is plug your iPod directly to the AC charger not the USB of your computer, and leave it for 2-3 hours and most of the time you will able to wake up your iPod.
Secondly, do a reset of your iPod when it hangs, it is simple just press "Select"+"Menu" keys, which will not erase your data of your iPod.
In case the above both do not manage to fix your iPod problem then you may force to do the following, but it will erase all your data therefore it is always to be wise to have a backup before your iPod got problem.
1. Reinstall the latest iPod updater after the reset
If 1 still not able to recongize your iPod by the computer then you have to put your iPod to DiskMode i.e. plug your iPod to the AC charges, do a RESET and press "Select"+"Play" keys, you will see the message "Disk Mode" in few sec. Then you need to connect your iPod with your computer, and hope that it will be recongized. If you are lucky to reach this stage then you simply need to restore your iPod updater, and your iPod should be back to normal.Please note that You may need to plug and unplug few times in order to let your iPod to be recongized.
If your iPod still not able to be recongized then you have to format your iPod while it is in a Disk Mode, you need to use the Disk Utility software (for Mac - I am not sure about PC) to erase the Partition of your iPod then do a formatting and disk verify straight after. Then you should able to reach the final stage i.e. restore the latest iPod updater and sysc your iPod with your iTune.
Additional hints which may help your during the fixing ..
1. Try to do few attempts, which could take you as long as 1 hour
2. Try to exchange cables to connect with your computer i.e. USB and Firewire
3. If you fail to solve your iPod with your PC then try to fix it with Mac and vice versa. Surprisingly, I do have experience that the iPod got recognized by my Mac after I connected it with a PC
Above are my experience and I am glad that more than 90% chance I am able to solve the iPods' problem with only one iPod Mini needed to be repaired.
Good luck and hope it works in your case

VPN doesn't work since I reset permissions

Hi .
Recently I reset my permissions via disk utility app, Since I did that, VPN doesn't connect on my mac. it works with same VPN information on my iPad & iPhone so the problem is not from VPN.
I'll be glad if you could help me.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Other users have had the same problem.
Apple Retail Store - Genius Bar

HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password. One site said that Apple TV doesn't work with WPA which Uverse uses. Is there anyway around this or will Uverse and Apple TV just not work together.

Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?

Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet.

Media Encoder CS4 doesn't work with Premiere (pic related)

Oh hai!
I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Apple Keyboard with number pad doesn't work with Mac Pro?

I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?

It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Apple tv doesn't work with my receiver

I updated my apple tv 3 and now it doesn't work with my Denon AVR-591 receiver. When I called Denon they said unfortunately the firmware on my receiver doesn't update and therefore may not work with certain devices. Is this possible?

connect the atv to a tv which does support the resolution and then lower the resolution and then connect it with your tv once more

WRE54G doesn't work with PS3...

Hello,
I bought yesterday the range expander WRE54G because I would like to expand my WiFi singal and make it accesible to my PS3.
I configured de range expander and it works fine with all my electronic gadgets with WiFi, but it doesn't work with PS3. My PS3 is always contecting and disconecting... And, curiously, when i connect PS3 directly to my router, using wifi too, it works fine...
What can i do to solve this problem? I only bought it to use with PS3.
i put the same SSID and chanel of the router wifi to the range expander... I think it must be in that way, no?
Thanks in advanced.

You have correctly setup the WRE54G if you have same SSID, wireless channel and wireless security on this device and the router. The range expander will reduce the wireless connection speed by Half. So may be your connection drops because of lower connection speed.

Iphone 5 doesn't work with philips DS9000 dock station

The dock station Philips DS9000 doesn't work with the Iphone 5. I have tried several lightening adaptator but the problem is the same. Anyone have the same ??

I have the SoundDock 10 and generally use the Bluetooth connection.
I have just reinserted the 30 pin normal socket ( as in normal SoundDock)
the Apple 30 pin to lightning adapter and with iPhone 5 have perfect
sound
It works so something in your set up is faulty possibly the adapter
some have posted issues

Connection to VPN doesn't work with exclamation mark on Network symbol

Similar Messages

Maybe you are looking for