Connection to WebServices using localhost or the IP of the computer

Hello,
I have an application which uses the LabVIEW Web Services. I use the browser and I access:
http://localhost:8000/rg/index.html where 8000 is the http port (LabView2011). The applications works fine.
When I use http://COMPUTER_IP:8000/rg/index.html the page loads but nothing hapens. Is like the WebService is not accessed.
I have asked a friend to access this address from another computer and he gets the same thing. The page loads but nothing happens.
I am using Labview 2011 and Windows XP.
What am I doing wrong? Thank you.

Hello,
So I have reinstalled completely Windows XP and LabView 2011. I have not installed any antivirus and the firewall is disabled.
1. I have created a new project, with a new webservice and deployed it.
2. For the newly deployed webservice I have opened a browser and accessed the service via:
                                     http://localhost:8080/Generator/Main/3        and        http://82.139.123.117:8080/Generator/Main/3
I have even asked a friend from a different network to access the webservice and it worked.
3. I have installed the Web UI Builder and created an interface for the service, tested the interface, obtained the index.html file from NI (named it rg).
4. I have copied this archive to: C:\Program Files\National Instruments\LabVIEW 2011\www, the HTTP port was by default 8000 so I left it like that.
5. I have used the address: http://localhost:8000/rg/index.html   and I could see the page but it was no response from the web service (image 1).
6. Then I copied the same rg directory to C:/Program Files/National Instruments/Shared/NI WebServer/www/rg/ .
7. Now If I access http://localhost:8080/rg/index.html - it works (image 2), http://127.0.0.1:8080/rg/index.html - does not work (image 3), http://82.139.123.117:8080/rg/index.html - does not work (image 4).
Image 5 are the settings of my Labview configuration.
What do you think, what am I doing wrong?
Attachments:
My Pictures.zip ‏202 KB

Similar Messages

  • If 3G connection drops when using dictation, will the dictation be saved?

    If 3G connection drops when using dictation, will the dictation be saved so that it can be used later?

    If you mean a voice recording that get transcribed, no.

  • When I connect my guitar using apogee jam the note drops off after a few seconds. Why???

    When I connect my guitar using apogee jam the note drops off after a few seconds. Why???
    Its the same on most of the preset amps.
    Please help, the apogee cost me £80!

    Is it stopping recording after 8 seconds? Are you using Garage Band?
    If both of these are correct:
    This is actually a feature (i'm not sure why it defaults to this).  Instructions for the iPhone version are below:
    With the amp section open, touch the sproket on the upper right.
    You should be in a "settings" type area with three tabs.  Touch "Sections"
    Select the section and switch it to automatic - it will now record until you stop recording by touching the stop icon.

  • Hi i am having problems connecting to internet using ethernet,in the network diagnostics i get all green,except network settings which is orange.i am running mountain lion on intel imac

    hi i am having problems connecting to internet using ethernet,in the network diagnostics i get all green,except network settings which is orange.i am running mountain lion on intel imac

    hi have done as you said plug ethernet straight into computer and into back of router,and worked straight off,i had the the powerline on extention when imac was up stairs,when i had computer down stairs it still would not work with powerlines even on main wall sockets,so they are getting binned,looks like i will have to move router upstairs,just wondering if i got extention wire from back of openreach box to router upstairs```,would it be ok,,the openreach box is next to my only phone socket in house,which is in back kitchen..any advice would be great,

  • When I connect my ipad or ipod to the computer, itunes does not show them as a "device".

    When I connect my ipad or ipod to the computer, itunes does not show them as a "device", however my computer can see they are connected. so it seems to be a problem with itunes. i have tried re-installing itunes and it still doesnt work.
    My Iphone does show as a device when connecteing wirelessly.
    Its not a problem with the driver becasue the computer can see the devices, so its a problem in itunes.

    Hello mimward,
    It sounds like Windows can see your devices, but iTunes is not seeing them. I would use the troubleshooting in the following article named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • I Connected My IPad 1st Generation To The Computed To Have It updated And I Lost All of My Pictures, How Do I Get Them Back?? Help, Please!

    I Connected My IPad 1st Generation To The Computed To Have It updated And I Lost All of My Pictures, How Do I Get Them Back?? Help, Please!

    Did you backup the iPad first? If you did - restore from the backup in order to restore the photos in the Saved Album on your iPad. If the photos were synced to the iPad, then sync them back again via iTunes.
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    If you did backup first, you will be restoring your most recent backup and you should be OK. But know that when you restore from a backup, you restore everything that is in that backup onto the iPad .... All documents, device settings, all data and so on. You cannot just select photos to restore to the iPad. It's all or nothing.

  • The Adobe Photoshop CC 2014 - I can't use becouse is LOOCK DOWN the computer -  When USE is LOCK the computer so everything is LOCKING can't even move the mouse + need to restart the computer and use Photoshop CC 64 bit instead - have this problem for abo

    The Adobe Photoshop CC 2014 - I can't use becouse is LOOCK DOWN the computer -
    When USE is LOCK the computer so everything is LOCKING can't even move the mouse + need to restart the computer and use Photoshop CC 64 bit instead - have this problem for about 6 months ...

    Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    http://forums.adobe.com/docs/DOC-2325
    Are you trying to use a 32bit version (I did not even know there is one for Photoshop CC 2014)?
    If so – why?

  • How can I get album artwork without using iTunes on the computer?

    I used touchcopy to copy the songs off my ipod touch onto my new computer, so i could then load them onto my ipod nano. I have got the songs on the nano, and theyre still on my touch, but there is no album artwork on either. For my nano, i can use iTunes, but the computer my touch is synced to is, well, dead. So, is there a way to get the album artwork back on my touch?
    Also, on my nano, it doesnt have any of the artists or album (name) for the songs
    Thanks

    Hi Wickster,
    I have found the following resource that may provide more help:
    iTunes 11 for Windows: Add artwork to songs and other items
    http://support.apple.com/kb/PH12361
    Additionally, you can instruct iTunes to search and download artwork from the iTunes Store. To do so, click File > Library > Get Album Artwork
    Thanks,
    Matt M.

  • HT1206 I buy apps in my iPhone using different Apple IDs. Which Apple ID should I use to authorize the computer when synchronizing iPhone with iTunes?

    I buy apps in my iPhone using different Apple ID. Which Apple ID should I use to authorize the computer when sync iPhone with iTunes?

    Hi again,
    After a little further research, it appears that you would need to create separate iTunes libraries in order to be able to continue to purchase and download previously purchased items on the same computer, for two different Apple IDs. Sorry - but my husband and I have had the library we sync with authorized for so long, that we have not run into this issue, but it appears that you will get an warning when you try to authorize the second ID on the same computer, indicating that another ID is already associated with it.
    So, you will probably have to set up separate iTunes libraries for each ID:
    http://www.imore.com/how-use-multiple-apple-ids-one-computer-and-itunes
    Sorry for any confusion - hope this helps!
    Cheers,
    GB

  • I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this?

    I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this? It bugs me when I'm looking at real estate.

    I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
    When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

  • I can no longer use all of the "Computer Management" tools against a remote computer. "Local Users and Groups", "Event Viewer", "Performance Logs and Alerts" and "Device Manager"

    Hello All,
    I can no longer use all of the "Computer Management" tools against a remote
    computer. "Local Users and Groups", "Event Viewer", "Performance Logs and
    Alerts" and "Device Manager"
    kindly see the below snapshot for assistance
    REGARDS DANISH DANIE

    This link may help....
    http://windowsxp.mvps.org/admintools.htm
    Freeman

  • I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    Irelandbound wrote:
    thank you, I have the adaptors so glad that would work.  I just heard adaptors burn out often.  So Just thought for my main iMac computer, a plug would be best.  I will get one once I move.
    Any other suggestions or things I should know about apple products in Ireland.  I know there are no Apple stores there.
    An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
    I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
    You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
    Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
    Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
    If you have something that doesn't have that input power spec, it would require a transformer.
    On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

  • When I connect my new iPhone 4s to the computer and iTunes is running, I am advised that a new update is available, but when I download it, I am informed that my phone can not be updated because it has an incompatible hardware

    When I connect my new iPhone 4s to the computer, iTunes informs me that there is an update avaialble and I procceed to download only to be told that my phone has incompatible hardware so cannot be updated. Any advice please

    Hi, I just re-downloaded the update, but instead of telling it to download and install, I just clicked on download only. This is a 813 mb file and I am on limited broadband usage. I did it this way thinking that I would get a chance to see the exact wording when it tried to install, however, I have no idea how to try and install the file now and when I came to click on the iphone symbol on itunes, the download diassapeared, where to I have no idea. I can't afford to download it again, and besides it takes approximately three hours to download it in any case, so all I can remember is that the error message stated that it couldn't update because the phones hardware was not compatible.

  • I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work

    I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work... Please help me and quick

    You need to check out the User Guide here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Can I connect my Time Capsule wired to the computer and just use it as a back up

    Can I connect my Time Capsule to my computer (wired) and just use it as a back up and not as a wireless router?

    Yes, you simply bridge the TC..
    Just google for it as we have posted the instructions endlessly.
    The one trick that might be necessary is to ensure the TC is on a different IP range to the main broadband connection.
    And make sure the gateway and dns do not cause issues.. so it is generally better to set static ip on the TC and the computer.
    None of it is hard so ask for specific instructions if you get to the point.

Maybe you are looking for