Connection to wi-fi network with apple devices is highly unstable
About a year ago I bought a 1TB time capsule that I use to create a wi-fi network at home. At wi-fi network I connected with no problem my Imac and Iphone 3g up to 20 days ago. Since then the connection to network has become unstable, I can not always connected with both utilities, especially with the iPhone that any attempt to link it to network indicates "can not access the network". Without change anything, sometime We can connect to network without any problem for some hours, sometime for some minuts/seconds. I tried several times to reset the configuration of the time capsule, also with qualified personnel apple but I have not solved anything. Today the connection to wi-fi network at home with apple devices is highly unstable.
Hi,
Thanks for your reply but as mentioned in my post, I've checked if drivers needed updating and it says the latest driver is already installed and updated for this device (network adapter). I double checked through the HP Drivers & Download page and scan for updates for out of date and missing drivers and software and it seems to scan to about 17% then I'm taken to another page with a link that goes back to software & driver downloads page so I click 'next' to confirm my operating system which then shows a long list of things to download and being that I know very little about computers, I don't know what I'm meant to be downloading or not? Everything? There's a total of 31 possible downloads listed (under their respective headings).
Have just rung the store that sold us this notebook a week ago and they are going to replace it as they've said it sounds like a faulty network card. Whew. I'm still a little confused though as to which of the downloads from HP's list I'm meant to download (assuming I'll see a similar list when we get the replacement computer) so if anyone can help me out with that, I'd really appreciate it. Thanks.
Similar Messages
-
my apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to. My iPad is up to date but my phone isn't but as I said mirroring and AirPlay worked fine on both devices befor...
Hi F1N5G10,
Thanks for contributing to the Apple Support Communities.
It sounds like you don't have the AirPlay option on your iOS devices. Restarting your Apple TV and iOS devices was a good first step, and you can find some additional tips to guide your troubleshooting at this link:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Sincerely,
Jeremy -
Multiple issues with apple devices.
First up is my iPhone 5. The major issue with it is that it cannot text anyone no matter what. I have reset the network settings multiple times but to no avail. I have even tried iMessage but that is only a temporary fix, as it doesnt allow me to text people without an iPhone. Secondly, it fails most of the time to connect to the 2.4GHz signal coming from my router, however, the 5GHz signal is proving to have much better results, but i cannot connect to it at all times, as the 5GHz signal cannot reach my room.
The second issue is my iPad 2. This device straight up wont connect to either signal, despite not only a network reset, but many factory resets.
I have heard of other devices in my house not having a great connection, namely my mothers MacBook Pro, but this is only the case with apple devices.
I am fairly certain my iPhone is under warranty, so is it possible to get a replacement, or will the current one be fixed.
Any insight or advice is greatly appreciated.RoyalRice wrote:
I am fairly certain my iPhone is under warranty, so is it possible to get a replacement, or will the current one be fixed.
Any insight or advice is greatly appreciated.
Did you reset the router? Is the wifi signal coming from the router? Since multiple devices are having problems connecting to your wifi, the problem might be there and not on the devices.
I would check that first. If that does not solve the problem, then take the iPhone to an Apple store or authorized service center. -
I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!
Try:
- Powering off and then back on your router.
- Anything else here
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
I can not connect the wi-fi network with my iPad Air
I can not connect the wi-fi network with my iPad Air
Hi there maurobats,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
-Griff W. -
I want to connect my MacBook Pro (2009) with Apple TV
I want to connect my MacBook Pro (2009) with Apple TV
I updated my Mac to Mountain Lion OS X 10.8.2 (12C60)
I had tried connecting my Mac for many time but I could not.
iTunse is connected with Apple TVRead this link. http://support.apple.com/kb/ht5404
2009 MBP is not supported for native AirPlay Mirroring. Sorry.
There are a couple of other pay-for apps that do this, but they're not as good... some people have had success. -
My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!
try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck. -
Which SMARTTV (SAMSUNG U46F7000 or SONY BRAVIA W8 46'') has a better communication and functionality with apple devices (i pad- iphone).
Since the above manufacturers do not give me a straight answer and it is very important reason for me to make a choice please advise!Sorry but I must correct about SONY!!!
The question was for Bravia series W9 and not W8. -
Does the Samsung galaxy s4 mini compatible with apple devices
Is the Samsung galaxy s4 compatible with apple devices such as iPad 2 Mac book air ?
Compatible in what respect?
-
Can't connect to a wifi network with a wep keyid 2
Hi,
how do you connect to a wifi network with wep but the keyid is 2, i can't find an option.
i put the password, in asci and in hexa, and the answer "can't connect to the network" a xp near got connected after changing the key id in configs :((
did i miss something?
thanks for helpI am relatively new to Mac's, as at 40 having had IBM/Windows compatibles since I was 14 (8086 woot!), I am still learning.
However, I believe the answer is that you must use Key 1. I don't believe OSX offers the chance to use any others. However, in case I am wrong, try putting a $ before the WEP passphrase, but again, I think it only uses Key 1.
Hope that helps,
Jesrael
Macbook 1.8 Core 2 Duo Mac OS X (10.4.9) 2GB Ram -
X220: Connected to a 4G network with 21Mbit/sec - A pleasant surprise!
Yesterday i was at a meeting, where i normally is connected to 3G WAN with 7.2Mbit/sec. - i started the connection as i normally do, but discovered that i connected to a 4G network with 21Mbit/sec. I didn't even know that the WAN card in my X220 was able to do that. So i tested the connection immediately and i could download with 1.5Mbyte/sec. effectively.
It was a pleasant surprise!
Moderator Note: Edited subject to match content.
/Henrik - Denmark
X220 - i7-2620, 8GB, 128GB Samsung 830 SSD (I just LOVE my X220!)
Solved!
Go to Solution.It seems your modem works at full speed for the 3G networks - HSDPA mode, 14.4 Mbps (Cat 10) downlink speed. Try upload and measure the speed. May be you'll get in the HSUPA mode up to 5.76 Mbps (Cat 6) uplink speed.
At the same time you see 21 Mbit/sec in the connection status window... Very interesting.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español -
Wifi problems with Apple devices, Microsoft devices work fine on my home network?
Starting two weeks back I noticed network speeds had slowed. In the house (2) ipads, (2) iphones, smart TV, Wii, (2) laptops. I manage the wifi connections by manually turning them off or on, so at a given point only (3) devices may connect to wifi router. Performance has gone from slow to non existent. I can connect to my SSID but cannot say stream to my IPADs or Iphones.
Power down reset cable modem and router
Tried renewing lease
Reset network settings
Recreated my Wifi connection (linksys router)
As I've stated my Wifi issues are only with my Apple devices and Windows laptops and other non apple devices access my Wifi network just fine. Any ideasClick on the info button on the right of the Wi-fi your trying to connect to. I You should see a bunch of numbers under the IP Address, Subnet Mask, Router, DNS, etc. If not try pressing the static button. Wait for a few seconds and close out of it. Go back in and it will most likely default back DHCP. If not press DHCP, type in your password and it should re-recognize your router. Also try settings, general, reset on the very bottom of the general tab, and reset your network settings. One of these two should work. Good luck.
-
WRT120N connection issues with Apple devices
my family has a plethora of devices we connect to the internet wirlessly through our relatively new WRT120N router, including a desktop, 3 laptops, 2 iPhones, 2 iPod Touches, an iPad, and a Playstation 3.
The wireless on the laptops and desktop (all are PCs) is fine, but the wireless on the Apple devices is terrible. every 5 seconds or so the signal will drop and the devices will lose the connection with the wifi. You have to go to settings and wireless to reconnect, but that will only last you another 15 seconds (if you're lucky). I have updated the firmware on the router, but it didn't do anything.
Does anybody have an idea of how to fix this problem? It's ridiculously annoying, and I have a feeling can be fixed with relative ease, especially since it's just the Apple products that are affected.
Thanks!@ jimmypat1221,
Same here and I did some research and here’s what I found. I accessed the router settings by typing the 192.168.1.1 (http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=856544c9d38d4e7a870493667aac568b_20603.xml&pid=80&...) and I found out that the firmware is not updated, so I upgraded the firmware my self. I downloaded first the firmware (http://support.linksys.com/en-apac/support/routers/WRT120N) and saved it to my desktop screen. Going back to the router settings and I just follow this link on how to upgrade (http://kb.linksys.com/Linksys/ukp.aspx?pid=96&vw=1&articleid=4030) and it was successfully upgraded. I set my set settings on the router with channel 11 and the security was wpa2 personal. From then on I don’t have issue with any of my apple devices. -
Can't connect to wireless network with Apple Computers (WRT54G)
Hi.
I have had a password protected router (WRT54G) for over two years that any pc will connect to if I give them the password. However, my roommate has an apple laptop and he can't connect, no matter how many times we try. I just got an ipod touch, and it can't connect to the network either. We are inputting our password correctly - why can't apple computers connect to my wireless network??
Again, my router is a WRT54G.
Thanks !!!
Message Edited by Debo24 on 05-24-2009 06:41 PMMake sure you enter the correct password...To check your Wireless Settings follow this link
If your Wireless Security is WEP then use WEP Key1 and not the Passphrase, make sure to enter a dollar sign on your Apple Computer when you attempt to connect...If your Wireless Security is WPA/WPA2 then use the WPA Shared key and no dollar sign is required... -
Cisco 877 - not working with apple devices
Hello all,
I'm hoping someone can help me with a problem I have with my 877 adsl router.
A bit of background:
I have set this up as my home router to the internet, which is connected to a Linksys WRT54GL as a wireless access point.
My windows & Linux devices/laptops all work fine over this setup and connect without a problem
However, all my apple devices, phones and ipads don't fully work. I can get to google and a handful of pages, but not the store or games or facebook etc. (my daughter thinks its the end of the world - without FB and instagram)
If I take out the Cisco and put a Thompson router in, it all works fine. so I'm assuming it something with the Cisco config.
Below is the config I'm using on the router
Any pointers would be most appreciated.
ddhrouter#sh run
Building configuration...
Current configuration : 2292 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ddhrouter
boot-start-marker
boot-end-marker
enable secret 5 mysecret
no aaa new-model
dot11 syslog
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1
ip dhcp pool CISCODHCP
network 192.168.1.0 255.255.255.0
dns-server 212.50.160.100 213.249.130.100 8.8.8.8
default-router 192.168.1.1
ip name-server 212.50.160.100
ip name-server 213.249.130.100
ip name-server 8.8.8.8
username cisco privilege 15 password 0 mysecret
archive
log config
hidekeys
interface ATM0
description ** adsl interface **
mtu 1452
no ip address
load-interval 30
no atm ilmi-keepalive
pvc 1/50
ubr 288
encapsulation aal5mux ppp dialer
dialer pool-member 1
dsl operating-mode auto
hold-queue 224 in
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Vlan1
description ** local lan **
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
hold-queue 100 out
interface Dialer0
no ip address
interface Dialer10
description ** adsl dialer interface **
ip address negotiated
ip mtu 1482
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
ppp chap hostname myusername
ppp chap password 0 mypassword
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer10
no ip http server
no ip http secure-server
ip http max-connections 4
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list 1 interface Dialer10 overload
ip access-list extended TerminalAccess
permit tcp host 192.168.1.0 any eq telnet
permit tcp any any eq 22
deny tcp any any
ip access-list extended no_telnet
deny tcp any any eq telnet
access-list 1 remark INSIDE_IF=Ethernet0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 192.0.0.0 0.255.255.255
access-list 110 permit icmp any any echo
access-list 110 permit icmp any any echo-reply
dialer-list 1 protocol ip permit
control-plane
line con 0
password password
no modem enable
line aux 0
line vty 0 4
access-class TerminalAccess in
password password
login
scheduler max-task-time 5000
end
ddhrouter#
all I'm after is a standard setup for my router. allow any out - deny any in.
Many thanks in advance.
Daveooo, you left your username, password, and enable in in clear text in the config you pasted, as well as not having an outside ACL applied and the VTY ACL allowing ssh from anywhere. Luckily the outside IP address isn't in the config or I'm sure someone would get ahold of your router....:) You should apply an outside access list and a firewall (I prefer CBAC firewall config for ease of use, but there is Zone based) to fix this. I assume ACL 110 was meant to be your outside ACL but it just isn't applied.
That being said Jody is likely right. PPPoE requires you to shrink your packet size (MTU/MSS) to allow room for the encapsulation that gets added to the packet. The command he supplied should fix this.
The 'ip mtu 1482' on the dialer interface may be too large as well.
Maybe you are looking for
-
Hey Arch forum. I really wanted to avoid having to ask a question on the forum, and try and fix myself, but I'm clueless on how to go about with this one. I've been using Arch for a couple of months now, and this issue has only really started getting
-
How can I switch to a different Nib file with a button
Hi there Im working on a Xcode application for IOS and I must admit im kinda new to Objective C. This specific application requires me to switch between different nib files. I am having quite a difficult time trying to figure this out on my own so so
-
Archiving Object MM_EKKO-MM_EBAN-MM-MATBEL- Display archived/deleted doc
Hello all, I need your help to understand if in Release 4,6C following archived and deleted documents should be displayed through Standard Transaction. Currently my system doesn't allow me to do that. Purchase Order, Contract, RFQ, --> ME23N Purchase
-
3.0 EA1 - DB Connection in Stored Procedure Windows
I don't know if anybody else has encountered this, or if it was fixed in EA2 (been way too busy to check it out). When I click on a stored procedure in the tree, it doesn't always open for the database connection that I'm selecting it from. Rather, i
-
Is there a plan to develop a REST API for Skype for Business Online? I've been trying to search through MSDN as well as the Office roadmap but can't really find a clear answer. I know the current Lync SDK's will still work with Skype, but this is onl