Connection to WLan failed (WPA (2) Password)
Good evening
We have got a MacBook Air since July and have been able to connect it to our privat WLan (running since years, connects 2 Iphones, 2 iPads, several Windows 7 machines and smartphones without a problem). Since this week I can't connect it to our WLan. The WPA (2) password has capital characters, small characters and numbers.
- Is it still a problem to connect a MacBook to a WLan with WPA(2) password with capital characters? (found in different foren as solution for this problem some years ago)
- Was there an update of the software that causes now problems?
Where can I find the operation system version? It is our first MacBook...
Thanks a lot
Matthias
IOS 5.1.1 should not have affected your WiFi connection, however, if you are now having problems try:
Try Settings -> General -> Reset -> Reset network settings
Similar Messages
-
Cannot connect to wlan eap-peap athentication fail...
Hi all
I have A nokia N97 which I tried to connect to my work WLAN but I get eap-peap athentication failed. We do user a certificate which I have installed on the phone but it does not connect. It does not even promt for user name or password. I can connect to my home wireless which just ask for a security key which i enter and it works please please help.
Please helpI got it working please read my How to
/t5/Connectivity/How-to-connect-to-wlan-with-n97-using-ca-certificate/td-p/659372 -
Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. Ideas?
Hi, you have to logout from your iTunes account and reconnect it:
Settings / iTunes & App Stores / ...
https://mobilfunkexperten.de/news/13450/sporadische-probleme-im-itunes-und-app-s tore
Hope this helps... :-) -
Whenever I try to log in to my account or redeem gift cards, I get a message saying "Connection Manager Invoke Failed to find a service connection url". I changed my password, logged out and the same thing keeps happening. Does anyone have a solution for this?
Hello,
Try to go to the settings on your phone... Settings > Store > Click your Apple ID: And sign out from your account, then sign in again .... This solved the problem for me on my iPhone 4s -
When I tr yo buy an app I put in my password an this comes up: Connection manager::invoke:: failed to find service connection URL. What do I do??
Try this:
I would recommend logging out of your account then logging back in. If the issue persists, see the article below.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297 -
Hi
just unpacked C3-01, I can't connect to Wlan. I have wlan with WPA/WPA2 and router is 192.168.0.1.
I have tried the 63 char code several times, but end up with wrong security code
Any ideas ???
BR
LarsIf you read my post you would know that that is the main reason why I wrote the post. The OVI browser does not work It says: "Unable to connect to service. Try again later". This happens every time I try to connect with me standing literally 2 ft from my router.
-
can't check my mail on the phone. Connection to server failed.Need to make sure correct password is there. I've changed passwords??????
Hello catrongeorgia13,
Thank you for the details of the issue you are experiencing with your email account on your iPhone. I recommend the following article to troubleshoot this issue:
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
Thank you for using Apple Support Communities.
Best,
Sheila M. -
N91 Podcast client over WLAN with WPA-PSK - downlo...
Hi all,
I'm using a N91 (2.20.008) and the Nokia Podcast Client (1.00.3) to download podcasts via my home network (router Zyxel P-2602HW-D1A). N91 can fine see my network but the connection is unreliable on the N91. I have several laptops and it works fine for them.
What happens is that the podcast client will start to update all podcasts, but nothing happens all the small "circles" just hang. If I try to download one podcast it will sometimes work, but mostly the Podcast client will only download 2% and then hang. Each time I have to drop the WLAN connection and reestablish it to get the next 2%.
So for me it seems that the client waits and waits for something that doesn't happen or some weird loop is taking place.
Is there any fix for this?
N91: 2.20.008
Nokia Podcast Client: 1.00.3
Router: Zyxel P-2602HW-D1A
WLAN Encryption: WPA-PSK
- ChrIvan,
Ok, that makes sense. So yes, as far as I know, the logs are not super helpful when it comes to MAC filtering pass/fail, but you will find generic messages related to MAC filter events. Filtering for MAC is a layer 2 association-level event, so if a client does not pass, you will see an SNMP log message like:
Sun Mar 18 20:23:52 2012 Client Association Failure: MACAddress: Base Radio MAC: Slot: 0 User Name:unknown IP Addr: unknown Reason:Unspecified ReasonCode: 1
If they pass, then you will see:
Sun Mar 18 20:29:05 2012 Client Association: Client MAC: Base Radio MAC : Slot: 0 User Name:unknown IP Addr: unknown
If you are not seeing these messages, make sure you have SNMP trap controls turned on for Client association and association failure events:
I have done some more testing today and I am not running into the issues that you are seeing. In my setup, named clients can associate and unlisted clients are failing to associate. At this point I would recommend that you try upgrading your code to 7.0.220.0 or higher. My testing was done on 7.0.220.0.
Justin -
Message "WLAN: Unable to connect. Wlan Network not...
Well guys i bought my nokia 5800 today so like any other curious people i looked the wi-fi hoping connect with the internet and when i try to connect with the wi-fi appears this message "WLAN: Unable to connect. Wlan Network not Found." and then it dosen´t connectbut he finds normally the networ and this message appears after i type the Router password.i´ve already looked in another foruns and i´ve already switch off the Option Qos in my router and the problem cotinues, so anyone can help me?my router is one linksys wrt54g and the type of connection is static ip an the security is Wpa Personal TKIP....
PLEASE ANYONE CAN HELP ME?I´D BE VERY GRATEFUL WITH THE SOLUTION FOR MY PROBLEM...
Thanks
Message Edited by darkcraft on 13-Jul-2009 09:47 PMtomasvaril wrote:
Same To me. I have Asus WL-500W router at home, WPA2-PSK(AES), password similar to this "lIGf@91pY0TnFY!Jh@7LjTUlsL3ZPY", MAC address filtering. My old Nokia E51 works, my Touch Pro Works with it. When i try my one day old Nokia E72 it does not work, the same like others:WLAN: Unable to connect. Wlan Network not Found. E72 works at my work wifi, which has the same settings but without mac filtering. Have no idea what is happening, all is setting correctly. MAC address of E72 is allowed on router. It has the same settings like E51, but E51 works like a charm E72 does not work. What is wrong?
As already suggested, you could try disabling the MAC filtering from the router, just to outrule possibility of a typo while entering E72's MAC address to router settings.
Have you tried swithing a WLAN channel that your router uses?
Log in to your router's web management pages (check router's default IP address and username/password from it's manual) and switch of the "Automatic" channel selection mode. Try few different channels, like 1, 3, 6, 9, 11, if one of the channels happens to work any better. Note that in case you have set your router to use channels 12 or 13 (or in case "Automatic" channel selection mode has decided to select channel 12 or 13) you must have a SIM card inserted and some other than "Offline" profile enabled on your phone since Offline mode (i.e. airplane / flight mode) won't allow your phone to operate on higher channels than 11.
In case you have configured your WLAN network (SSID) to be "hidden", try disabling hidden SSID mode on the router.
Asus WL-500W router seems to be a pre-standard 802.11n device so might be worth looking in to your router's WLAN settings and see if playing around with router's WLAN operating mode and settings improve the situation. First of all ensure that your router is not set to operate in 20/40MHz mode (set it to 20MHz only) assuming that the router is in default 802.11b/g/n mode. You could also try disabling the 802.11n mode completely by selecting a 802.11b/g mode (if available).
You should probably also check that you're running latest (2.0.0.6 ??) firmware version on your Asus WL-500W router since there seems to plenty of complaints regarding WLAN connectivity and stability issues (in general, not specific to Nokia handsets) with this particular router model. -
Can't connect to WLAN with Nokia E71x
Hi,
I have Nokia E71x and I can't connect to home WLAN, on screen it says that routher is found but when I wan't to go to Internet trough WLAN (Start web browsing ) it says WLAN: Unable to connect, Invailed WPA pre-shared key. Need help.
RegardsCheck the router if you have set a password or any changes that you have made on it. This is because if your router is a secured connection (asking for a code or password), you have to make sure that you have entered the correct password.
-
Cannot get maile connection to server failed
followed the instructions for icloud set up in apple support for ipad and iphone even deleted the account and then set the account up with the correct ID and password. I do use a different ID than my apple ID for my icloud account. I use my me.com email address. I can get into the cloud on my pc and I can send and recieve email when I log into my icloud account but this fails to work on my ipad and iphone. Attempts to seen or get email on these devices when on a wifi network end up with the message "cannot get mail connection to server failed"
leeHi HLSdoc,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/ts4002
Issues sending or receiving mail on iPhone, iPad, or iPod touch
Best of luck,
Mario -
"Connection to server failed" error with Gmail exchange server
Hi,
I upgraded my iPhone 4 to iOS 4.3 on Friday and now I can't access my Gmail account using the Microsoft Exchange settings, I just get a "Connection to server failed" error.
I also have a Google Apps email account for my website and I am able to access it using exchange... it's just my regular Gmail account that I can't access (and that's where all my contacts are stored).
I can access the account using the regular Gmail email settings but that doesn't sync my contacts over the air, which is the advantage of using Exchange that I love the most.
I don't know if it is related or not, but I had a really hard time upgrading to iOS 4.3. I guess the update file was corrupt and it put my phone into restore mode. I had to use a different computer for the upgrade to finally work. Because I was using a different computer I had to restore it as a new phone rather than restoring from a backup, so maybe that has something to do with my email problem.
Message was edited by: KJones75I seem to have solved the problem. I deleted my Gmail account from the phone and then changed my Gmail password from my computer, and then tried adding the account to my phone again... and surprise, surprise, it worked.
I'm not sure why changing the password fixed the problem, but I'm glad it's working again. -
I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If nothing above helped, restart your router.
No data is lost due to a reset. -
E72: Unable to connect to WLAN
Something weird is with my E72. I had been happily using the WLAN in my house for a few months now. Then yesterday it suddenly failed.
Unable to connect to the wlan. The default browser showed me "Unable to connect. WLAN not found" and "Unable to perform operation"
But during a WLAN scanning, I can clearly search my house WLAN showing me "2WIRE*** found".
E72 had really give me lots of problem. Hope this will be my last problem I encountered with my phone. Thank is advance for any suggestion for this problem.Try with Hard Reset (shift+space+backspace+on/off). Make a full backup before!
Cheers
Einar -
Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon May 16 23:57:31 2011
B create_con (con_name=R/3)
B Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
B Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
B Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno 00
M sid SED
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 32
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 212
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c 1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 22784 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000B2C0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 000000000B2C0050
M DpShMCreate: allocated wp_adm at 000000000B2C2270
M DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
M DpShMCreate: allocated tm_adm at 000000000B2C7BD0
M DpShMCreate: allocated wp_ca_adm at 000000000B86B450
M DpShMCreate: allocated appc_ca_adm at 000000000B871250
M DpShMCreate: allocated comm_adm at 000000000B873190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
M DpShMCreate: allocated gw_adm at 000000000B8F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B8F9ED0
M DpShMCreate: allocated wall_adm at 000000000B8F9EE0
M
M Mon May 16 23:57:32 2011
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sirillium1
M
M Mon May 16 23:57:33 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.024) Default value for max. input variables is 2000 (note 655018)
C (0.024) Profile parameter to define max. input variables (note 655018)
C (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.024) Input parameters for SQL statements increased (note 655018)
C (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C (0.018) More trace in case of packed to string conversion error (note 1262799)
C (0.016) R3trans export aborts with signal 6 (note 1262245)
C (0.009) IA64 alignment errors (note 1245982)
C (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1203] [dbsh 1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 212
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon May 16 23:57:33 2011
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c 334]
We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
XUSER Entry 1
Key :DEFAULT
Username :SAPSID
UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 2
Key :c
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
XUSER Entry 3
Key :c_J2EE
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 4
Key :w
Username :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
Any idea? we are out of ideas at this moment.
Regards
Edited by: Gustavo Goicochea on May 17, 2011 6:37 PMNatalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
We update kernel to release 142
R3trans -d and -x exit with (all with user SIDADM)
SVERS table does exist and belongs to SAPSID
dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
OK
END
'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
Why it still says that SVERS table does not exist and SQL error 942?
C Now I'm connected to SAP DB
C 00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C *** ERROR => prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
dbsdbsql.cpp 1604]
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp 7253]
C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS
C SELECT VERSION INTO ? FROM SVERS ;
B ***LOG BZA=> table SVERS does not exist on database [dblink#4 @ 1301] [dblink 1301 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1515]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10824]
M
Users seem to be ok
dbmcli on SID>sql_execute SELECT username, usermode FROM users
OK
END
'CONTROL';'ADMIN'
'SUPERDBA';'SYSDBA'
'SAPSID';'DBA'
'SAPR3';'DBA'
User SAPR3 does not have anything on database
dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
ERR
-24988,ERR_SQL: SQL error
100,Row not found
Any idea?
regards
Maybe you are looking for
-
Error while checking in and storing
Dear All I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message Error while checking in and storing Message no. 26253 What may be the issues, even my my repositories working fine ( configured
-
Control Panel applet to customize your theme. With this utility you can: change system font family change system font size change font colors change application shortcut sizes at homescreen show or hide the backgrounds for application shortcuts at ho
-
Can I print A4 sized booklets (ie using A3 paper) using Acrobat Standard v9.4.1? The settings that are available seem to only allow printing booklets on A4 or A5 paper.
-
Oracle service Oracle sid oracle version iSQL*Plus is not getting started
Hi, we have installed Oracle 10g on WIN2003 Enterpeise Server sp2 & installed Solution Manager7.0 ehp1 for Development server successfully. For Production server, we had installed WIN2003 Enterpeise Server sp2 & while installing Oracle for Productio
-
Transfering iphone playlists to itunes
Whenever I plug my Iphone into my macbook to synce my itunes it does not recognize any playlists that i have created on my iphone?