Connection to www via a pc across an ethernet cable.

I am trying to connect to the internet via my Win XP SP2 PC, which is also connected to my home network via an additional ethernet port. The LAN that is connected to the network (and therefore the internet) is marked for sharing in the network settings. and as i'm new to mac's i'm totally lost.
i know there are many other topics of this nature and having read them i'm still no better off.

If you have a router and the peecee and the Mac are both connected to it via ethernet cables with your modem connected to the WAN (or "uplink) port on the router, you should not need internet sharing. Is the router configured to get a dynamic address from your ISP? and is the router configured to assign addresses on the LAN (DHCP)? You should not have to connect "through the pc".

Similar Messages

Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

Are you following these instructions?
http://support.apple.com/kb/ht4796
Have yo tired by connecting both to same network vice direct ethernet connection?
There is no direct USB connection

HT1941 trying to connect time apsule to macbook air with the ethernet cable in the WAN port the airport utility doesn't detect it

trying to connect time capsule to macbook air with the ethernet cable in the WAN port but the airport utility doesn't detect it but when i put it in the LAN one it does but it doesn't let me configure
any ideas?

Isn't it fun trying to do things without an ethernet cable direct to the computer.. Apple sell a usb to ethernet adapter cable fairly cheap.. makes life a lot easier having something to do hard connections.. or as hard as usb can manage.
Since you have to access the TC by wireless .. press and hold the reset button on the TC for about 10sec until front led flashes rapidly.. don't worry about the ethernet cable.. leave it disconnected.
Now click on the airport symbol and join another network. The TC should revert to its home name.. which will be a combo of Time Capsule and its MAC address. There is no wireless security and you can do the setup.

Can connect via wifi but not by ethernet cable?

Hi,
I'm a bit confused here.
I have an airport express which works fine and I just bought an airport extreme.
The airport extreme is connected to the modem by an ethernet cable and the airport express is connected by ethernet cable to the airport extreme.
I am able to connect to the airport express wifi with all the computers but I'm unable to connect any computers to the airport extreme via ethernet cable.
Both airport express and extreme are lit up green and they both appear on the Airport Utility.
The airport extreme setting is set so that it is joining the airport express' network. That's the only way the light shows up green instead of flicking amber.
I've looked at the settings over and over again and am not sure/don't understand why this is? All I know is that I've got the wifi working! The ethernet connection is not workin for both PCs and Mac.
Any help is much appreciated!

The airport extreme is connected to the modem by an ethernet cable
On the WAN plug, right?
and the airport express is connected by ethernet cable to the airport extreme.
Why? You don't need AirPort Express anymore, unless you have signal weakness in your home.
If that is the case, you can use the AirPort Express to extend the range of the new AirPort Extreme WiFi network with WDS (Wireless Distribution System).
http://support.apple.com/kb/HT1515?viewlocale=en_US

Can TC be connected via wifi signal (without an ethernet cable)?

I would like to use my TC without having the use an ethernet cable. My router is located on the second floor and I want to have my TC on the 1st floor.
How can I do it?
Thanks a lot,

You can but you should NOT.
The only way to connect the TC to a non-apple router without ethernet (or ethernet substitute like homeplug or what we call, ethernet over power EOP adapters).. is "join a wireless network"
The TC becomes a dumb client on the network.. super slow. as the TC no longer has ethernet or wireless available for local connections. In other words you gain nothing.. because you can make no other connection to the TC.
If the router is Apple, then you can use extend a wireless network and the TC will still have usable wireless and ethernet.
Otherwise simply plug the TC into the router on second floor.. by ethernet.
Explain WHY you want the TC on the 1st floor?
There is a possible way of setting up the TC in total isolation of the existing networking so a computer plugged in can use it. The rest of the network loses out.. but at least it is usable.

My iphone will connect to itunes via wifi but not throught the cable

A month ago i noticed that when i plugged my phone into the computer it made the little dings but it wasnt charging. i looked at itunes and it wasnt on there either. i went through and updated my phone with my computer so it would recognize it again, hoping that it would fix all problems. Instead it just fixed the charging. Id plug it in and it would charge but not sync to itunes.
Prior to it not working, i had set it up to where it could sync through wifi. That is the only way i can sync my phone. I've Uninstalled itunes and the reinstalled it and it didn't make a difference. does ANYBODY have any clue as to what to do? I have Windows 8.1 and an iPhone 5s.

Hello, juliag1212.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver. Be sure to test connecting the device to the computer with another sync cable if available.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

How do I connect an iPod touch to Internet using an Ethernet cable

My daughter,s college has no WiFi in the dorms, but each room has an Ethernet connection. WiFi routers are not allowed. Can we connect the iPod touch to the Internet using the Ethernet cable and some sort of hardware or patch cord

No. The iPod will only connect to the internet via wifi. The USB connection provides NO internet connectivity.
Maybe you can cheat and setup a laptop with an wifi card as a hotspot
Connectify Hotspot - The Wi-Fi Software Router for Windows PCs

HT1338 After starting to download the Mountain Lion software, my wifi connection was disconnected. When I attached the ethernet cable, the downloading software was gone, and when I tried redoing the process, the app store would not accept the code. What d

Hey,
I just tried redeeming my software online. I went through the whole process, got the password, and proceeded to get the software to download. But soon after, the wifi connection was disconnected, and when I tried to connect the ethernet cable, the entire software had disappeared from my launchpad. When I tried to restart the download, it kept saying that the password had already been used before, and that it could only be used once per computer. What do I do now?

You shouldn't have to re-enter the code, Lion should be on your purchases list so you can re-download it. In the App Store, click Purchases... do you see ML there?

HT4260 I am planning to extend my network via "roaming" option using an Ethernet cable as the second router is not within range of the primary router. My question is can I use an airport express as the additional router ? My pirimary router is an extreme.

Under the roaming option mentioned in the KB do both routers have to be the same ? Or can one be an express and the other an extreme ?

Setup of the AirPort Express is going to be much easier than you might imagine, although we'll go step by step here.
First, power on the AirPort Express for a few minutes, then hold in the reset button on the Express for 9-10 seconds and release. Allow a full minute for the Express to restart to a slow blinking amber light.
Connect the Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the AirPort Express. I assume that you have previously tested the Ethernet cable to make sure that it is working correctly.
On your Mac, click on the AirPort icon at the top of the screen and wait a few seconds for a listing of New AirPort Base Station. Just below that, click directly on AirPort Express.
AirPort Setup will open up automatically, take a minute to analyze the network, then announce that the Express will be configured to extend the AirPort Extreme network.
Enter a device name that you want to use for the Express and click Next
Now AirPort Utility will confirm that the Express is being configured to extend using Ethernet.
When you see the message of Setup Complete, click Done
That's it. It might surprise you though, to learn that the Express has actually been configured to "create" a wireless network in this type of setup.

Cannot Connect Imac 24" via mini dvi to HDMi adapter cable to Sony Bravia 3

Hello Everyone,
I'm having the worst time in trying to connect the following:
1. Imac 24" 3.06 dual with dvi connection
2. Mini dvi to HDMI adapter (this mac with this connection was produced only for a short while!).
3. 10' (foor) HDMI wire
3. Sony Bravia 32" model KDL32L-5000 with 3 HDML connections
i.When I wire everything up, I keep getting"no signal" on my Sony Bravia TV.
ii. It doesn't matter whether I connect the HDMI wire to HDMI 1,2, or 3 on my Sony
iii. On my Imac Hard Drive>>Applications>>System Preferences>>Displays
all I get is a list of different resolutions. There is no mention or mirrors etc.
Nothing happens when I press "Gather Windows" or Detect Displays"
Can someone out there please help!!!!!
Can you also give any solution in very simple and small detailed steps!
Thanks,
Stacey Bindman
Montreal

Majortrout, there is a major disconnect going on here.
1. You are showing an Ebay link with a mini-DVI to HDMI adapter.
2. You report that you have an Early '09 24" iMac.
3. That iMac does not have a mini-DVI port. That iMac has a mini-DispayPort.
4. You need a mini-DisplayPort to HDMI adapter.
It is physically impossible to attach the adapter to which you link at Ebay to your iMac. So you need to take a step back and figure out what you really have; which iMac, which adapter, etc.
Dah•veed

Can one Connect a G4 PowerMac directly to Airport using Ethernet cable?

I have a PowerMac G4 as a music machine and want to connect it to my Amplifer. I don't have an Airport card in the G4, but have been given an Airport Express, so was wondering if it is possible to connect using the 10/100 connection from the G4 staright to the Airport Express, and then using the optical connection into my Amp. Has anyone done this before?

The ethernet port on the AX is only active as a LAN connection when the AX is connected wirelessly to another base station using WDS. Unless your AX is connected in such a manner, you are out of lick.

HT2497 do I connect my airport express to my modem via the WAN port and then connect to my imac via ethernet cable?

Do I connect my airport express to my modem via the WAN port and then connect from airport express to my imac with ethernet cable? Is that how you "hard wire" the connection? Because when I do that, I still can't get online. Thanks.

What is the make & model of your modem?
You pretty much stated the correct wiring. There should be an Ethernet cable connected between the modem and the WAN (circle of dots) port on the AirPort Express base station.
Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

New Mac User - Problem connecting to Internet via work Ethernet cable.

Hi all.
I am having problems connecting to the Internet through my work ethernet cable.
When I plug the cable in, Network settings tells me it's there and working, all of the ip numbers conform to what the IT dep say they should be, but safari won't connect to any site.
I can see the shared folders on the Exchange Server, and access the files no problem, but cannot get any connection to the internet.
Have called Apple Support and they seem to think the issue is with my work's Network which I am starting to agree with. We went through all of the settings together and they said it all looked ok. Then we tried deleting and re-installing the system configuration folder. Still no joy.
Airport works fine, (have tried it on three different routers), as long as the Ethernet cable is unplugged.
If I plug the Ethernet cable directly into a router, it works fine also.
I connect to my work network by running an ethernet cable from the wall socket to my Macbook. It's the same cable that I connect my PC with, and works fine on my PC.
Anyone come across anything similar?
My Macbook is just over a day old and running OS X 10.5.5.
Thanks

For some reason (and it's nothing to do with me) it's all working fine now.
Thanks for your help nonetheless.
Stu:-)

Can I extend my network by connecting one of my airport express devices to my airport extreme via an ethernet cable? I have CAT5 cable throughout my house but have a wireless network w/ 3 airport expresses

Can I extend my wireless network by connecting one of my airport express devices to my airport extreme via an ethernet cable? I have a wireless network with 3 airport expresses and 1 airport extreme functioning as the base station. I have CAT5 throughout my house.

Welcome to the discussions, mib88!
Can I extend the network a second time with another Airport Express...
The short answer would be no. If you want more details, please continue to the next paragraph.
Apple's "extend a wireless network" works just like the hub and spokes of a wheel. Your main hub is either the Time Capsule or the AirPort Extreme and the AirPort Express is at the end of a spoke. You can add more devices at the ends of other spokes, but these devices will communicate directly to the hub, not to another device at the end of a spoke.
Apple does offer an option which is is known as a "static WDS", which can consist of a "main", "relay" and "remote" device. The problem here is that this type of setup has two huge drawbacks:
1) All of your faster "n" devices will drop down to much slower "g" speeds
2) The bandwidth or speed capability on the network will drop down to only 25% of the original bandwidth with a "main", "relay" and "remote" on the network.
Don't think you want this on your network. Your best option is to connect the new AirPort Express to the "hub" using an ethernet connection. If you can't run the ethernet cable, take a look at a pair of ethernet powerline adapters to accomplish the same task by sending the ethernet signal over the AC powerline in your home.

Connecting aiport extreme and airport express via ethernet cable ?

Is it possible to connect an airport extreme to an airport express via ethernet cable, I ask because I want to expand the range of my wifi network to the basement of my house, the floors are really thick concrete so I installed some ethernet cable runs, I hope somebody can help me, thank you.

+How do I do it ? Do I connect the modem to the airport extreme and then run the ethernet cable from one of the extreme's ethernet ports to the express ethernet on the basememt and a second cable from another of the extreme's ethernet connectors to the express on the second floor+
Yes, this is exactly correct.
To configure each AirPort Express (AX)
Open AirPort Utility, click Manual Setup
Click the Base Station tab below the icons to name your device, assign a device password and adjust time zone settings. Give each Express a separate name so you can identify then easily.
Click the Wireless tab
Wireless Mode...Create a Wireless Network
Wireless Network Name...Exact same name as your AirPort Extreme network
Radio Mode 802.11n (802.11b/g compatible) if you want to use 2.4 GHz
Channel...Automatic
Wireless Security...Exact same setting as your AirPort Extreme network
Wireless Password....Exact same setting as your AirPort Extreme network
Click the Internet icon
Change the Connection Sharing setting at the bottom to "Off (Bridge Mode)"
Click Update at the lower right and the AirPort Express will restart in 20-30 seconds
I think it is easier to configure each AirPort Express with AirPort Utility by temporarily connecting it to your computer with a short ethernet cable. Once you have saved the configuration, you can move the Express to the location that you need.
Please post back on your progress.

Connection to www via a pc across an ethernet cable.

Similar Messages

Maybe you are looking for