Connection with Audi MMI

i just picked up my new Q5 audi and i can connect my ipod to the system, even though my ipod shows its connected it isnt recognized by the MMI system.
any suggestions?
thanks

I have a '13 GTI, and it should be the same interface. I have to power on/off when in media mode sometimes to get it to recogmize. It's even worse with the optional cable that connects via USB. I've been told (on the GTI forum) that VW/Audi doesn't seem to "like" Apple products.

Similar Messages

  • Bluetooth connection with audi MMI iphone 4 drops after software update 5.0.1

    Hello,
    After uptdating my iPhone 4 with software 5.0.1, I have problems with my bluetooth connection in my car (2006 Audi MMI). When I make a call or someone calls me, after a minute or so, the connection is lost for 10- 15 seconds, and then reconnects again. Pretty annoying.
    Someone got a solution?

    I got the exact same problem. Noticed in the morning while hoping to check out the extra features.
       Taking my lunch break now to research solutions...

  • Nokia X6 phonebook connection with Audi MMI

    Hi,
    Just upgraded my phone to the new X6. Bluetooth to the mmi system is working fine but i cannot access my addressbook through the mmi.
    Anyone else suffering this problem? Any ideas?
    Thanks

    Hi,
    Not a guaranteed solution but try installing this Contact Download Application for Nokia S60 5th edition devices on the X6 (phone memory)
    http://europe.nokia.com/support/product-support/nokia-810/software
    Delete the pairings on both the car and the phone, switch the phone off and on, then try to connect again.
    As said, not a guaranteed solution because the patch is designed to support older Nokia Car Phones, but there are some OEM systems that it seems to work on.
    Hope it works!

  • My iPhone 6 doesn't work with Audi MMI adapter

    When I try to connect my iPhone 6 to the Audi MMI adapter in the glove compartment of my 2015 Q5, it shows up as a source on the media screen, but says there are no playable files.

    i should have stayed with android as it worked with uconnect....it even allowed my jeep to read the text messages to me and I could respond...now iphone 6 and software not working ... Apple aweful at support ...

  • Has Apple fixed the IOS to recover the heretofore compatibility with Audi MMI?

    I formerly was able to play my I Tunes music with the phone connected to the 2012 Audi MMI cable.  After an update the phone is no longer with compatible with the car. 

    What troubleshooting have you done?
    BTW, this is a user-to-user technical support forum. No one here would know what Apple did or did not do, or even if the problem is with iOS.

  • Iphone 3GS with bluetooth connection with Audi car kit

    I connected my iphone 3GS to my Audi car system through bluetooth connection. The Audi system recognizes the iphone and his address phone and all works well.
    The issue comes when I disconnect the iphone from the car kit. After, even someone calls me, the call ringtone rings only two times and after switches off during the incoming call. This issue is random, sometimes the alarm rings well, sometimes not by working in the way described above. Someone has the same issue and knows how solve it? Is an issue linked to hw or only sw?
    thanks
    Message was edited by: IGK

    Hi.,
    Can I check with you if you have this problem..
    I assume you have paired the iPhone 3GS to the Audi carkit.
    First, play something on the iPod.
    Then go to the Bluetooth settings page where you can see all the paired devices.
    after that, make a connection to the carkit.
    Is there any stuttering or audio breaking you hear from the carkit?
    I have this problem with my iTech BluebandR headset and iSkin Cerulean RX. I only found this problem with iPhone 3GS but it worked fine with 3G.

  • Since updating my IPhone 4s to iOS8.1 it wont communicate with my Audi MMI system?

    Since updating my IPhone 4s to iOS8.1 it wont communicate with my Audi MMI system?  I can manually play music and podcasts from the phone by connecting and operating from the phone but it wont work handfree when connected.  Anyone have a solution?

    First, try rebooting it:
    Rebooting your iDevice
    Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The iPad should begin to start up.
    If that doesn't help then restore it: Backing up, updating, and restoring iPad, iPod touch, and iPhone software

  • Problem connecting Nokia N95 to Audi MMI via Audi ...

    Hello again!
    My dad has recently upgraded his phone from his old-ish Motorola RAZR to the N95 and now can't connect properly to the car. He bought the handsfree set when he still had the Nokia 6310, so it's designed for that, but his next phone, the Motorola had no problem synching with the car and everything worked fine. But now, with the new one, it only works as a headset of sorts. The phonebook is inaccessible, and the ringing is only heard when you make the initial connection, and even that the standard ring ring, not the mp3 he has as his ringtone. And from the second auto-connect afterwards, the MMI only mutes the radio, and makes no other sound.
    I've paired my Nokia 6280 with it and it works as it should, addressbook, ringtone and all.
    Is this the problem of the N95 not supporting the old version of Bluetooth, like i've been reading on the forum and can't be resoloved by any other means than getting another phone or can it be solved by a simple firmware upgrade?
    Also, i've tried googling for UHV 1733 and haven't had a single hit. I am confused. :?

    I don't know personally but it has been discusse before somewhere else. Try this link:
    http://discussions.apple.com/thread.jspa?messageID=4735345&#4735345
    Hope that helps

  • My iPhone 4S not compatible with 2008 Q7 Audi MMI.  Now only phone numbers come up on screen, no name.  Names appeared on the phone screen but not MMI screen. Cannot dial by contact info while driving anymore.  Never had this problem with previous iPhones

    My iPhone 4S not compatible with 2008 Q7 Audi MMI.  Now only phone numbers come up on screen, no name.  When someone calls, only the number appears on the MMI screen, not their name or whether they called from their office/home etc..   Same with missed calls, dialed numbers etc.. Names appeared on the screen of the phone,  but not on MMI screen. Cannot dial by searching  contact and name info while driving anymore.  Never had this problem with previous iPhones.  Is this an Apple issue or Audi issue?  Anyone with this problem? Help!

    NIGHTMARE Finally Ends, after nearly two weeks.
    After trying for over a week trying to get my replacement iPhone 4S to activate, I ended up driving 110+ miles to an Apple Store to get a second replacement, which had been specially shipped there for me.  Popped in the SIM card, went through the setup and I finally have an iPhone 4S that works, at least for the time being.
    Advice to others who find themselves in this situation:
         1)     If you get these messages (see original post), the phone is bad.  Demand a replacement.
         2)     If the AppleCare tech advises that the Apple Agreement Administration team is investigating, you'll be waiting for a week or more for them to complete it.  Demand a replacement immediately, don't let them put you off indefinitely.
    After the initial phone call documented in my original post, I was in daily contact, phone & e-mail, with the AppleCare tech trying to figure out the problem, and we tried everything, from forced restore's to switching SIM cards, conferencing w/ AT&T, etc.  It seems that this was a case of first impression to Apple, but if it wasn't, then the problem is not well documented or known by those who should know, and for that, the blame should be on Apple, not the AppleCare tech who worked tirelessly trying to figure out a solution--I'd send him a case of beer if I knew where to send it.

  • N95 Bluetooth connection with car

    I drive an AUDI A6. Before I got my N95 I had a Sony/Ericsson i800. When I connected this phone with my car (Bluetooth), everything can be done from the car environment such as lookin for phonebook entries, selection of entries, dialing etc.
    With my N95 I can connect with my car and I can use the hands-free speeking system ... but only this! I can't read any phonebook entry, calling list etc.
    Is there any trick to open the phone directory for use in bluetooth mode?
    Best regards and thanks in advance.
    Sunni

    Having just bought a new Audi A6 Le mans 3.0tdi quattro Avant - I was keen to find a solution to this bluetoth/phonebook problem. I too have the Nokia N95 and can confirm that the above link works 100%. Firstly you need to have Nokia PC Suite installed on you PC & phone .. then download the application and save to your pc. With your phone now connected to your pc.. download the saved application to the phone... [ make sure bluetooth is off and not paired to your car ]
    Once installed on your phone - go to your car & connect/pair via bluetooth.... go to applications and run the application. It took a couple of minutes "processing " .... then switches to " transferring " ... again a minute or so.... Job Done.. My phone book is now integrated with the car and the MMI.
    Thanks for the above link. http://europe.nokia.com/A4143881
    It's the 2nd one down.....ie
    Nokia 810 Contact Download Application for Nokia S60 3rd edition devices Download now
    Nokia_810_Contacts_Download_S60_3rd.sis
    103.80 KB | English
    This contact download application enables you to download the contacts from the following Nokia phones to your Nokia 810 Car Phone via Bluetooth technology: Nokia E50, E60, E61, E61i, E62, E70, E90 Communicator, N71, N73, N77, N75, N76, N80, N91, N91 8GB, N92, N93, N95, 3250, 5500 Sport, 5700 XpressMusic, and 6290.Message Edited by audinut on 16-Oct-200703:19 PM

  • My iPhone 4S Bluetooth will not connect with either my iPad1, MacBook Pro or Automobile BT.  Suspect a stack issue in new BT 4.0 (BTLE) release. Has any one discovered fix to this. I have tried this with two separate 4S phones and have same problem..

    One further clarification. I am most concerned with connecting with BT in automobile. I can use WiFi to tether to my other devices.  I cannot change the car very easily! My iPhone 3G had no connection issues.

    I'm new.  Same bluetooth problem. Will not pair with my 2010 VW GTI w NAV system, or my MacBook Pro 17" (just discovered the MacB prob.)
    When I initially discovered the problem I went to an Apple Store. Genius was excellent but requested that I check with VW.  VW people were very helpful. A mechanic had an iphone 4s. He came out to the car ... He could not pair my phone but he could pair his phone ... So, it's the iphone ... Back to the Apple Store ... the genius was really good. He replaced the iphone. Great !  So, back out to the car & it would not pair, still.  So ... can't be the phone , right.  Back to VW. The Audi manager had an iphone 4S. He paired his phone with my car. He could not pair my phone to my car. He tries my phone in a new 2011 GTI sitting on the lot ... my phone pairs with it just fine.  So ... it's my car.  So ... make an appointment to get the bluetooth module replaced. They replace the Bluetooth module. My iphone will not pair.  They end up pairing 2 different iphone 4S to my car ... but not my iphone 4S. My iphone 4S will also not pair with another 2010 GTI they have in for service. Though the 2 iphone 4S
    pair with the second GTI just fine.  They even try pairing my iphone with a brand new 2012 GTI in the showroom ... yep ... it paired fine.    So ... ????????????????
    They are going to update my nav software next (tomorrow), Hopeful ??? not really ... Will be taking my computer to Apple Store next ... maybe if they can discover why it will not pair to my MacBook Pro it will lead to a solution for the GTI ???  I'll get back to you.

  • Just got the Iphone 6 and it paired BT with the car phone system okay.  But it will not pair with the audio part where I could play my recorded music with my 5-C.  The system will not connect with the phone and the message is that the settings

    My toyota Seinna 2011 refuses to connect with my Iphone 6 as a "portable player".  Message says for me to adjust the player.  On the phone it is searching for other devices but not connecting.  Now same phone is paired with the car multimedia system and will take and make calls.  Help!

    I very much doubt it  if you consider how much data Apple release to App developers
    to allow them to create apps that  work under iOS
    Audi being lazy like most of the other motor manufacturers
    They will be registered developers and as such get all the info and data they need

  • Adobe cloud has lost connection with the server

    Adobe cloud has lost connection with the server, can't get adobe cloud to work so I can re-install photoshop to fix a corrupted DLL file.

    *Adding new items/removing orphans*
    Try iTunes Folder Watch or iTunes Library Updater. Folder Watch is much faster on the adding files front, can be set to run in the background and includes a useful exclusion feature, however it’s slow at removing orphans. iTLU is better for this although doing it manually after looking at a list of proposed removals generated by Folder Watch is probably faster still. iTLU can also be set to update iTunes when you've used 3rd party tools to change tag info.
    You may need to amend the list of file types these programs look for. My list includes:
    .mp3 .mp4 .m4a .m4b .m4p .m4v .mov .wav .aif .mid .ipa .ipg .ite .itlp .m4r .pdf
    Note the last 6 types may not be recognised as already being in the library so should either be omitted from the search or you can add (at least for Folder Watch) individual exclusions for files you know are already in your library.
    tt2

  • Untrusted server cert chain - while connecting with ldap

    Hi All,
    I am getting the following error while running a standalone java program in windows 2000+jdk1.3 environment to connect with LDAP.
    javax.naming.CommunicationException: hostname:636 [Root exception is ja
    vax.net.ssl.SSLException: untrusted server cert chain]
    javax.naming.CommunicationException: hostname:636. Root exception is j
    avax.net.ssl.SSLException: untrusted server cert chain
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.a(DashoA12275)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(DashoA12
    275)
    at com.sun.net.ssl.internal.ssl.Handshaker.process_record(DashoA12275)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
    at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA12275)
    at java.io.OutputStream.write(Unknown Source)
    at com.sun.jndi.ldap.Connection.<init>(Unknown Source)
    at com.sun.jndi.ldap.LdapClient.<init>(Unknown Source)
    at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source)
    at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source)
    at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source)
    at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
    at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
    at javax.naming.InitialContext.init(Unknown Source)
    at javax.naming.InitialContext.<init>(Unknown Source)
    at javax.naming.directory.InitialDirContext.<init>(Unknown Source)
    at Test2.getProxyDirContext(Test2.java:66)
    at Test2.main(Test2.java:40)
    Any help would be appreciated
    Thanks in Advance
    Somu

    This got resolved when in the code the following
    System.setProperty("javax.net.ssl.tmrustStore", CertFileName);
    where cert file name is the filename with complete path.the file is a CA certificate of the LDAP server
    in X509 format

  • Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Please take the Mac to  Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

Maybe you are looking for