Connection with finder fails
Dear All,
we have a problem re-connecting to server over AFP
Steps we take:
Start system
Login
CMD+K
Connect to server over AFP
Server that we are connected to is showing on the list on the left under "Shared"
We can work on this connection fine, open files etc.
But if we try to click on server name on the left under "Shared" it will com up as connection failed and error in console:
28.08.2013 12:40:12,090 NetAuthSysAgent[1097]: AFP error -5014 mapped to EIO
28.08.2013 12:40:12,091 NetworkBrowserAgent[291]: SharePointBrowser::handleEnumerateCallBack returned 5
We have to reconnect with CMD+K to see files again.
Can anyone advise on solution?
Anyone anything?
Any sugestions where to look for solution or what to check?
Similar Messages
-
Since I tried to upgrade an App i get the message: connection with iT unes failed. I'tried all the advise on the net i.e. Change date, password etc. Nothing helped. Service desk is unreachable. Can anyone helm me?
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
Connection with Ldap failed when Upgrade to Colfusion 8
Hi,
I have a problem with cfldap tag used in CF8. I have a cfldap tag defined in my application which works fine on CFMX7. But the moment I installed CF8, it gives me an error - "Connection to LDAP server failed."
My cfldap tag goes as below:-
[CFLDAP NAME="qLDAP"
START = "O=myCompany,C=valueOfC"
SERVER="ldapServerName"
FILTER="(alias=myLdapAlias)"
SORT="SN,GIVENNAME,ALIAS"
ATTRIBUTES= "ALIAS,SN,MODIFYTIMESTAMP"
ACTION="QUERY"
SCOPE="SUBTREE"
TIMEOUT="60000"
referral="yes"
secure="CFSSL_BASIC"
USERNAME="cn=valueOfcn, ou=contractor, o=myCompany, c=valueOfc"
PASSWORD="myLdapPassword"
PORT="636"]
[cfdump var="#qLdap#"]
The wierd thing is when I remove secure,username,password & port attributes from the above CFLDAP tag, it works fine & gets me LDAP results. The moment i put these attributes back in the CFLDAP tag, it fails. I had installed ssl secure on my IIS too. what else am I missing ?
My error is - "Connection to LDAP server failed."
When I expanded the stack trace, I get the following :-
coldfusion.tagext.net.LdapTag$UnknownHostException: Connection to LDAP server failed.
Need your help...............What is your current build?
If you are getting a yellow triangle, most likely either the update.zip or update.xml are corrupt. You should be able to delete both files and try updating again.
I used to have a:
K1_A301_14_14_120109_US -
NWDI connection with NWDS fails with CIM_ERR_FAILED
Hello,
I tried to import a development configuration from our NWDI. Before that I configured the URL in the preferences and could successfully ping the server. When I try to import a development configuration in the Development Configurations Perspective with remote I first get the login screen. After confirm login and PW and a short processing I get following error message (see below). On another Computer with the same Netweaver Installation it works fine. Do you have an idea why this happens, and how i can fix this problem and connect ti the NWDI.
Thanks in advance!
Gereon
com.sap.lcr.api.cimclient.LcrException: CIM_ERR_FAILED: Object manager is not activated
at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120)
at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.getIResult(SimpleResponseAnalyser.java:53)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:218)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:146)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:443)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:747)
at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:980)
at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.enumerateInstances(JavaCIMObjectAccessor.java:211)
at com.sap.lcr.api.sapmodel.SAP_DesignTimeConfigurationAccessor.enumerateInstances(SAP_DesignTimeConfigurationAccessor.java:168)
at com.sap.ide.eclipse.component.devconf.DevConfManager$3.run(DevConfManager.java:507)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.sap.ide.eclipse.component.devconf.DevConfManager.listRemoteDevConfNames(DevConfManager.java:500)
at com.sap.ide.eclipse.component.wizard.LoadDevConfPage.fillTable(LoadDevConfPage.java:225)
at com.sap.ide.eclipse.component.wizard.LoadDevConfPage$5.widgetSelected(LoadDevConfPage.java:281)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
at org.eclipse.jface.window.Window.open(Window.java:563)
at com.sap.ide.eclipse.component.provider.actions.DevConfNewAction.run(DevConfNewAction.java:46)
at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:229)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1391)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)Hello,
Solved the problem on my own. I used the incorrect port of the SLD in the preferences in the NWDS.
Gereon -
Yesterday, I tried to secure my airport network (linksys router) with WPA2. My ibook is now connected, but I didn't succeded with my imac G5 (OS 10.4.10). Is gives an error message. I tried to delete and create again a network but, the airport dialog window of network ( in preferences) is missing the + and - to create and delete a network. It is a little bit messed up: it shows just my own network and the dropdown menu to choose the network is laying over the text.
I have done a clean installation, but it didn't help. Please, give me some advice!Hi hazelaar & Welcome to the Discussions!
When you say a clean install, was that a Fresh Install with Zeroing the HD, or an Archive & Install which preserves users settings & APPs, etc.?
I don't see any + or - on my Network>Airport page/window!?
The create may just be a semantics problem, you don't "create" networks in that window, but can add a name of an existing network to join. There is a Create Network, (if you checked allow this computer to create networks), up under the Airport Icon in the Menu Bar, but that is to create a network on your machine for others to join. -
Having trouble with finder????
ok i have two accounts on this mac both have administrative rights, i use mine and i can get into the other so heres the problem i log in and everything is fine then sooner or later the finder just wigs out, buttons start to disappear like the back, forward, and action, in the left pane of the finder the icons like applications and Macintosh hd black out, and when you click on the finder or hdd it wont open and the Macintosh hd text blanks out I've tried to repair the disk and it did fix all the errors, but not the problem. Before i read that sometimes its just the account that has the problem so i deleted my old account and made a new one that still didn't help the problem. I've also looked in the console and every time i click on the finder icon it comes up with "Finder failed to load a resource -- the binary is corrupted" i dont know what the problem is please help
Power Mac G5 Quad Mac OS X (10.4.8)A message about corrupted binaries from the Finder would have me booting from the OS X Install disc to run Repair Disk on the boot HD (per Using Disk Utility and fsck), and if that didn't fix the issue, an Archive and Install. You'll need 5 GB or more free space on the HD to do an A&I.
-
Safari cannot open page unable to connect with server?
Keep running into these errors? Safari is crashing, or Could not activate cellular network data because I am not a subscriber? Cannot get mail connection with server failed? Verizon denies network difficulties....??? Suggestions would be greatly appricated! Thanks in advance!
Wi-Fi issue? Are you in a home or business environment? Have you tried connecting and re-connecting to your wi-fi network?
-
Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. Ideas?
Hi, you have to logout from your iTunes account and reconnect it:
Settings / iTunes & App Stores / ...
https://mobilfunkexperten.de/news/13450/sporadische-probleme-im-itunes-und-app-s tore
Hope this helps... :-) -
Crystal Server 2011 "Failed to open the connection" with 32 & 64 bit drivers are loaded
Brand new installation of Crystal Reports Server 2011 with CR Developer 2011 as well. Downloaded new Postgres and MySQL drivers for both the 32 and 64 bit ODBC definitions. Created a new report on the server to eliminate any migration driver incompatibility issues. Reports run fine in Developer but give the same "Failed to open the connection."
and still problems running the reports If I Save Data with the reports, I can click View to see the data, but they will not refresh.
All the articles I'm finding online seem to point to the issue with needing 32 & 64 bit drivers, but I've loaded both and built my ODBC connections with the 32 drivers in the SysWOW64 folder.
Logged in as Administrator. Any thoughts out there? Are there some new security measures?
Thanks in advance ...Yes, Designer and CRS are on the same machine.
Good catch with the 5.1 driver. I loaded up the mysql-connector-odbc-5.1.13-win32 driver and used that. It alone failed when I made the ODBC connection with it. I see on the CRS 2011 Feature Pack 3 .pdf file that it says "Only 64-bit database connector middleware is supported" ... I downloaded the other mysql-connector-odbc-5.1.13-winx64 64bit file, but teh .msi and .zip versions failed on the load. Do I need that if it says that or should the first one be enough?
I've been trying to use a normal User DSN, no? Apparently I don't have access as a machine Administrator to do it as I get "You are logged on with non-Administrative privileges. System DSNs could not be created or modified." Having our server guys get that straightened out and we'll see. Had not heard of that actually but will give it a go.
You say I should create the DSN entries in the 64 bit version of the ODBC Data Source Administrator ... located in the system32 folder, not the SysWOW64 folder, where the 32 bit drivers are found, yes? Isn't that the "wrong" location to use I've been reading? Or are System DSNs different from a User DSN?
BIG thanks for the replies. I owe you beers!!!!! -
I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows
Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H. -
Wicd fails to connect with a WEP key
I'm trying to connect to my wireless network after the recent update to net-tools. I sorted through most of my issues with the hostname command (I think) by installing inetutils and the recent update to wicd. Now, after trying to reconnect, my /var/log/wicd/wicd.log looks like the following:
2011/10/04 09:23:48 :: trying to automatically connect to...UVEE2
2011/10/04 09:23:48 :: Connecting to wireless network UVEE2
dhcpcd[12869]: dhcpcd not running
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
dhcpcd[12912]: dhcpcd not running
2011/10/04 09:23:48 :: Putting interface down
2011/10/04 09:23:48 :: Releasing DHCP leases...
dhcpcd[12967]: dhcpcd not running
2011/10/04 09:23:48 :: Setting false IP...
2011/10/04 09:23:49 :: Stopping wpa_supplicant
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
2011/10/04 09:23:49 :: Flushing the routing table...
2011/10/04 09:23:49 :: Putting interface up...
2011/10/04 09:23:51 :: Attempting to authenticate...
unlink[ctrl_iface]: No such file or directory
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
2011/10/04 09:23:51 :: connect result is Failed
2011/10/04 09:23:51 :: exiting connection thread
2011/10/04 09:23:51 :: Sending connection attempt result bad_pass
dhcpcd[13034]: dhcpcd not running
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
dhcpcd[13078]: dhcpcd not running
This looks strange to me because I am connecting to a wireless network that has a WEP hex key, and nothing in my configuration suggests any WPA key. I even tried rm-ing all of the *.conf files in /etc/wicd/ to no avail. Thank heavens for netcfg, or I think Arch Linux would have just blown my network stack again, the way the net-tools "upgrade" did
Does anyone have any tips on how to solve this?
P.S. Maybe it would be good to have some testing process for future updates affecting network connectivity? If this were my only computer I would totally have been dead in the water with the net-tools update. It took a sizable amount of time and effort to find out I needed to bootstrap the hostname command. For a while, before I figured to check the wicd logs, I was considering just dropping Arch Linux. Breaking the internet is just about the worst because you leave people with broken systems and no way to look up how to fix them.Sorry, but I don't think that thread applies here. That thread is dealing with the net-tools upgrade, and the missing hostname utility. I fixed that, dhcpcd works just fine. My problem is that after the wicd update, it tries to use WPA to connect to a network that I have specified as using WEP, so it fails to authenticate.
-
When my clients connect their CMAK-created VPN, it fails to run the script to set their routing table with the following error:
Custom script (to update your routing table) failed (8000ffff)
My objective is to create a VPN connection with split tunneling - does not use the VPN connection as the client's default gateway.
All my clients are on Windows 8.1 64-bit, and are logged in with Administrative privileges
My VPN Clients are on 10.242.2.0/24, my internal network is on 10.172.16.0/24
I want only traffic for 10.172.16.0 to go via the VPN. Everything else should go via the client's internet connection
My Connection Manager Administration Kit profile, was created on Windows 2012 R2 CMAK with the following settings:
"Make this connection the client's default gateway" is UNticked on the IPv4 tab.
Define a routing table update is specified with a text file containing:
+++ Start of txt file +++
REMOVE_GATEWAY
add 10.172.16.0 mask 255.255.255.0 default metric default if default
+++ End of txt file +++
The txt file is saved in DOS/Windows format (not Unicode or UTF-8 which I've read causes problems)
I've tried everything in lower and upper case in the txt file after reading that the file might be case sensitive
The following appears on the client with logging enabled:
[cmdial32] 10:42:34
03 Pre-Init Event CallingProcess = C:\WINDOWS\system32\rasautou.exe
[cmdial32] 10:42:40
04 Pre-Connect Event ConnectionType = 1
[cmdial32] 10:42:40
06 Pre-Tunnel Event UserName = UserName Domain = DUNSetting = VPN (L2TP x64 NoGW) Tunnel DeviceName = TunnelAddress = vpn.mydomain.tld
[cmdial32] 10:42:43
07 Connect Event
[cmdial32] 10:42:43
09 Custom Action Exe ActionType = Connect Actions Description = (none) ActionPath = CMDL32.EXE. The program was launched successfully.
[cmdial32] 10:42:43
08 Custom Action Dll ActionType = Connect Actions Description = to update your routing table ActionPath = C:\Users\UserName\AppData\Roaming\Microsoft\Network\Connections\Cm\VPN64\CMROUTE.DLL ReturnValue
= 0x8000ffff
[cmdial32] 10:42:43
21 On-Error Event ErrorCode = -2147418113 ErrorSource = to update your routing table
[cmdial32] 10:42:43
13 Disconnect Event CallingProcess = C:\WINDOWS\system32\cmdial32.dll
Where can I find out what error codes 8000ffff or -2147418113 mean?That was it. Thanks, Steven
"By default, the dial-up entry and the VPN entry have Make this connection the default gateway selected.
Leave this default in place, and remove any gateways by using the REMOVE_GATEWAY command in the routing table update file itself."
It seems counter-intuitive to leave
Make this connection the default gateway selected, when I specifically don't want that behaviour, but leaving it selected and using REMOVE_GATEWAY works for me. -
Dear All,
I'm working on reporting of Project Server 2010, while configuring SQL SERVER REPORTING SERVICES faced issue after two complete days of troubleshooting along with this gone through plenty of forums, unable to figure out any solution. So finally posting on
technet in order to find solution.
ISSUE/PROBLEM:
At initial configured the SQL REPORTING CONFIGURATION to sharepoint integrated database (SQL SERVER is installed on seperate machine), change the service to Domain Account and also installed sharepoint add in on server story was fine at this point. Furthur
moving to SHAREPOINT ADMIN console and while configuring the Sharepoint Integrated Reporting continuously facing this error:
Failed to establish connection with report server. . . . (Snapshot is attached for your further reference).
My point of concern is that whenerver i try to open the REPORT SERVER URL on project server machine it prompts me to enter username and password but whenever i insert the domain credentails it didnt accept though it can be accesible by using the credentials
of Local Admin of sql server machine. So i wana come to know whether its permission issue if yes then where i should mention the domain credentials.?
REGARDS DANISH DANIEDear Paul,
I am able to open the URL (http://psdb/ReportServer )using
domian credential and page open with these contents
Reporting Services Error
The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded
Second,
Configured the SPN on domain controller , performed the steps required to change the AUTHENTICATION in rsreportserver.config
file also done the registry settings to disable the loop back settings.
Same error still ! .... what should i do now ???
REGARDS DANISH DANIE -
R3load.exe failed to connect with return code2
Dear Experts,
I am installing SAP netwaver 7.4 PI server on Windows server 2012 and MS SQL 2012.
This is a domain installation so infra team have created 2 users <SID>ADM and SAPService<SID> user with local admin rights.
I have installed MS SQL with windows authentication only installation and after that i was able to connect Db with SQL management studio.
As soon as i have started PI installation after SWPN created DB schema ,granted permission for users and restarted Db engine ...boom error in ABAP import phase as "R3load.exe failed to testconnect with return code2".
I have updated r3trans,r3load,dbsl lib.etc but no good also i have tried to open MS sql management studio but now it is giving error as
"unable to connect with <SID>ADM user"
Any suggestion or help will be highly appreciated.
Warm Regards,
SumitDear Ashutosh and Atul,
please find logs
R3load.exe.log
E:\usr\sap\PID\SYS\exe\uc\NTAMD64\R3load.exe -testconnect
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.036) R3ldctl: fix CDS views creation in upgrade export mode (note 2017805)
DBSL patchinfo (patches.h): (0.033) Memory leak in DBSL reconnect (note 2010675)
--------------------- End of patch information -------------------------
process id 9136
(DB) ERROR: db_connect rc = 256
(DB) ERROR: DbSlErrorMsg rc = 99
Trans.log
4 ETW000 R3trans was called as follows: E:\usr\sap\PID\SYS\exe\uc\NTAMD64\R3trans.exe -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Thu Jun 05 14:14:49 2014 99602 0.099602
4 ETW000 [ dev trc,00000] db_con_init called 135 0.099737
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): usage of ssfs switched off (rsdb/ssfs_connect=0)
4 ETW000 245 0.099982
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 47 0.100029
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 22 0.100051
4 ETW000 [ dev trc,00000] Loading DB library 'dbmssslib.dll' ... 70 0.100121
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, count 1, addr 00007FFFF69A0000
4 ETW000 14312 0.114433
4 ETW000 [ dev trc,00000] using "E:\usr\sap\PID\SYS\exe\uc\NTAMD64\dbmssslib.dll" 29 0.114462
4 ETW000 [ dev trc,00000] Library 'dbmssslib.dll' loaded 32 0.114494
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dbmssslib.dll 29 0.114523
4 ETW000 [ dev trc,00000] Version of 'dbmssslib.dll' is "741.10", patchlevel (0.33) 916 0.115439
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dbmssslib.dll 8596 0.124035
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dbmssslib.dll 56 0.124091
4 ETW000 [ dev trc,00000] New connection 0 created 62 0.124153
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 8067 0.132220
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 54 0.132274
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 38 0.132312
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 22 0.132334
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 47 0.132381
4 ETW000 [ dev trc,00000] Thread ID:11864 5905 0.138286
4 ETW000 [ dev trc,00000] Thank You for using the SLODBC-interface 59 0.138345
4 ETW000 [ dev trc,00000] Using dynamic link library 'E:\usr\sap\PID\SYS\exe\uc\NTAMD64\dbmssslib.dll'
4 ETW000 51 0.138396
4 ETW000 [ dev trc,00000] 7410 dbmssslib.dll patch info 40 0.138436
4 ETW000 [ dev trc,00000] SAP patchlevel 0 107 0.138543
4 ETW000 [ dev trc,00000] SAP patchno 33 36 0.138579
4 ETW000 [ dev trc,00000] Last MSSQL DBSL patchlevel 0 26 0.138605
4 ETW000 [ dev trc,00000] Last MSSQL DBSL patchno 33 26 0.138631
4 ETW000 [ dev trc,00000] Last MSSQL DBSL patchcomment Memory leak in DBSL reconnect (2010675)
4 ETW000 38 0.138669
4 ETW000 [ dev trc,00000] ODBC Driver chosen: SQL Server Native Client 11.0 native 2199 0.140868
4 ETW000 [ dev trc,00000] lpc:(local) connection used on EQSPIDEV 370 0.141238
4 ETW000 [ dev trc,00000] ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2551]
4 ETW000 103595 0.244833
4 ETW000 [ dev trc,00000] (18456) [28000] [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'EQUDOM\pidadm'.
4 ETW000 51 0.244884
4 ETW000 [ dev trc,00000] ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2551]
4 ETW000 6321 0.251205
4 ETW000 [ dev trc,00000] (18456) [28000] [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'EQUDOM\pidadm'.
4 ETW000 49 0.251254
4 ETW000 [ dev trc,00000] ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2551]
4 ETW000 5918 0.257172
4 ETW000 [ dev trc,00000] (18456) [28000] [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'EQUDOM\pidadm'.
4 ETW000 50 0.257222
4 ETW000 [ dev trc,00000] ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2551]
4 ETW000 28076 0.285298
Database services are running.
Warm Regards,
Sumit -
My office is setting up a new gateway server. I can connect to the old one just fine, but the new one is not allowing me to connect. I can connect from my Windows VM, but not my Mac Client.
This is the log:
2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
screen mode id:i:0
use multimon:i:0
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
[2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
Found
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
And here's a log for server that I can connect to:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:20] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
[2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:25] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:25] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
[2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Nov-26 15:52:29] RDP (0): Server hides cursor
[2014-Nov-26 15:52:31] RDP (0): Server shows cursor
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated.Hi Jeremy,
Thank you for posting in Windows Server Forum.
From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
Configuration used and full address name both appears different so please verify configuration accordingly.
Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
You can follow below guide to configure RD Gateway and after that verify the result.
1. Deploying Remote Desktop Gateway RDS 2012
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Maybe you are looking for
-
How to populate a adf tree programmatically
Hi, I am creating a adf tree (single select) which is the menu of my application. Each node of my tree is a command link. I am reading the data from a table through a view object (adfbc). I want to somehow manipulate my managed bean so that I can dis
-
Bought a song the other day and it did not download correctly. I am over 50 and a little new to using this technology so please pardon me if it is an easy fix. iTunes will not allow me to download it again or to even buy it again, so I cannot figure
-
Workflow Items are not received
Hi All, I am new to Workflow.I have an issue , we had a new joinee in our org, he has been assigned to a rule in oocu_resp, but he still does not receive any items to his inbox,whereas other agents in that rule receive it. What is to be checked and
-
Hi, I have experienced some problem (refer to my attachment) in running my LabVIEW program as an EXE file. However, such error did not appear when the program in running as llb format. I suspect it has something to do with the configuration of the Ca
-
Premiere Pro CS3 Glitch - Track Matte
I found a glitch this morning in Premiere Pro CS3. I have a nested sequence on my main timeline. On that sequence I have a track matte effect and above the nested sequence video layer is my "mask" layer. When previewing this sequence through Premiere