Connection with mail keeps timing out

Every time I check my mail it times out and I can't recieve mail, but can send it. The error reads "The sever error encountered was: The connection to the server "mail.mac.com" on port 143 timed out"" Anyone understand this?

any firewalls enabled?
if your email provider supports ssl, you can also try changing port to 993 and enable SSL to see if that allows you to get incoming mail (unde Mail/Preferences/Accounts/Advanced)

Similar Messages

  • Mail keeps timing out

    I've been having problems getting my e-mails. My pop box provider said that there is no problems their side and that Mail is timing out before it has connected to their server. I've had a look at changing how long it is until Mail times out, but can't find any way of doing so. Is it possible to change it and how do I do so?
    Thanks
    Lucy

    There is no way I know of to change how long it should take for Mail to time-out. What you could do is try to fix whatever may be causing Mail to require so much time to establish a connection to the server.
    Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Try also turning OFF all the network port configurations except the one needed to connect to Internet and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
    Try also using a different method to connect to Internet, if possible, or connecting the computer to Internet as directly as possible, i.e. bypassing any routers that might be present, using an ethernet cable instead of wireless, etc.
    Another thing that may cause Mail to time out before the server responds is having too many messages on the server...
    BTW, if the version of Mac OS X on the computer where this happens is not the same as appears on your profile, then this is certainly relevant information that you should have provided from the very beginning. I, for example, am not familiarized with Mac OS X 10.2 and didn’t reply to you before just because of that.

  • Mail keeps timing out, will not sync emails

    i am using mac os X snow leopard. the mail application will not get new email from my gmail account. it says that it is unable to connect, and this message comes up:
    There may be a problem with the mail server or network. Verify the settings for account “Gmail” or try again.
    The server returned the error: The connection to the server “imap.gmail.com” on port 993 timed out.
    any help?

    Accessing a Mail server via a web based interface (say gmail.com) is quite different than using an external email program (like Mail). The most you can infer from being able to login using the web site is that the account is active and that the username / password you are using is correct.
    I would suggest taking your computer to a different network connection (ideally an Apple Retail Store as all the required ports will be open on their routers). See if the same issue happens there.
    If it does not then we know there is something going on with your network / ISP.
    Another option is to login to a new user account on your computer and try that. If it works in a new user but not your main user there are settings files you can try pulling. One step at a time though.

  • My e-mails are not sending. "connection to SMTP server timed out." How do I get this working?

    As of yesterday, I am receiving e-mails fine; however, unable to send. Everytime I try to send an e-mail, I get "Sending of message failed. The message could not be sent because the connection to SMTP server (my mail address) timed out. Try again or contact your network administrator.
    I received help from lunarpages (they host my domain); however, they were unable to resolve the issue. They suggested something is blocking IP, or need to update Thunderbird, or there's a firewall there...
    Help!!!
    My clients are waiting for responses to e-mails!
    Thank you.

    To diagnose problems with Thunderbird, try one of the following:
    *Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

    I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • Tried loading the latest version of itunes but the download would not complete. Now when I connect my phone to a usb i get an error stating required files are missing, reinstall itunes. I tried that but the reinstall keeps timing out?

    Tried loading the latest version of itunes but the download would not complete. Now when I connect my phone to a usb i get an error stating required files are missing, reinstall itunes. I tried that but the reinstall keeps timing out?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Why does the connection to the server on port 143 keep timing out?

    why does the connection to the server on port 143 keep timing out?

    no special character and I just found a post regarding this same issue that's happening today for alot of people
    see this post for more details
    i can't access my yahoo mail on my iPhone.  I get the error message...."The connection to the server "apple.imap.mail.yahoo.com" on port 993 timed out"......is the server having issues?  anyone else have this problem?

  • Using Home Sharing to transfer itunes library from old computer to new but connection keeps timing out...anyone have a solution?

    Hello everyone,
    I am attempting to use Home Sharing to import my itunes library from my old computer to new (as per instructions on this site), but the connection keeps "timing out" and so the import gets cut short.
    Both computers have the new itunes (I updated them last night), but only seem to get about 5 minutes (or 100 songs in) before the connection error occurs.
    I have an external hard drive and would use it to transfer my library (which is ~45GB) however my old computer isn't recognizing the hard drive so I thought Home Sharing was a good option...perhaps I was wrong?
    Help Please!
    Thanks

    You might need to make sure neither is going to sleep (System Prefs > Energy Saver)
    Also check your settings under System Prefs > Security. My sisters new laptop kept logging off due to some setting there.
    HTH

  • Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

    Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

    My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

  • I am on a Windows 7 OS attempting to reduce pdf size with my Adobe Acrobat Standard XI & Pro.  The application keeps timing out and  at the Subsetting embedded fonts portion and the application gives "Adobe Acrobat has stopped working" and then closes.  T

    I am on a Windows 7 OS attempting to reduce pdf size with my Adobe Acrobat Standard XI & Pro.  The application keeps timing out and  at the Subsetting embedded fonts portion and the application gives "Adobe Acrobat has stopped working" and then closes.  The document is 275 pages.  Is there something I can do to stop this?

    Hi Ricci,
    Since when are you facing this issue? Did you tried system restore to a date before this problem occured.
    Does acrobat stop working when you open this specific pdf file or with any pdf file that you open?
    Regards,
    Rahul

  • HT4623 I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do???

    I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.

    Maybe this will help:
    Troubleshooting
    As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data.

  • TS4036 I am trying to restore with icloud on a new ipad.  WHen I get to iCloud Sign In, it keeps timing out.  Why and how can I fix this?

    I am trying to restore with icloud on a new ipad.  WHen I get to iCloud Sign In, it keeps timing out.  Why and how can I fix this?

    Sign out of old email and sign in with new.

  • HT1212 i am attempting to restore an i pad mini but computer keeps timing out of network connection how can i fix

    Im attempting to restore ipad mini but itunes site keeps timing out how do i fix

    If you are doing it via your computer's iTunes then try temporarily turning off all your firewall and antivirus software on your computer until the download/restore has completed.

  • Can anyone help me!!! i have an i pod touch and the 4 digit passcode has been forgotten. i have tried a number of times to restore the factory settings on i tunes and have put the i pod into recovery mode, but attempts keep timing out

    my son has forgotten his 4 digit pass code for hios i pod touch. i have been instructed to disable it and connect to i tunes to restore factory settings. when I do this the download time is anything up to 20 hours and it keeps timing out. it is now saying that i tunes cannot connect to the i pod because it is locked with a passcode and saying that i must enter the passcode - can anyone help?

    - To get around the passcode issue, place the iPod in recovery mode. For how to see:
    iPhone and iPod touch: Unable to update or restore
    - If you are getting a network timeout error during the restore, disable the computer's security software during the restore.

  • 13" 2.3 i5 wifi keeps timing out

    My one month only Macbook Pro 13 has suddenly developed a problem with the wifi.  It keeps timing out or it finds the network but can not connect to the internet.  I have a dell and 2 other PC's and PS3 and all other machines can connect so I know its not the router.  Is there a wider problem with the macbook pro 13?  I really need to know how to resolve this ASAP?

    I had a similar problem and I changed the channel on my router, and all seemed good from there, there might have been interference with other devices in the household.

Maybe you are looking for

  • NullPointerException obtained while using multitable with a single class

    Hi, I get the following excepting while trying to create a row in database using a class associated with multiple tables in Toplink 10.1.3. I have checked my foreign keys and the tables are not linked through primary keys. Please let me know anything

  • UPDATE statment

    hi for all, plz i have a question ,i have a tabel called (ClientT) which contain these fielde First_Name Last_Name UserID Address Password BirthDate Answer and i need to make an Update to this table according to some informatio ,My Code Class.forName

  • Bind a huge object to jndi tree in sun one 7

    Hi we are loading all the master tables in to objects at the app server startup (SUN ONE 7) and then binding the whole object to the jndi tree. All the tables data in text files comes to about 5 MB and the serilized object with data to about 8 MB. Bu

  • Recovery Partition Size

    I have a Toshiba Satellite L755 (about 3 years old).  Today the hard drive crashed and I installed a new 1T toshiba SATA drive. When I used my recovery DVDs, the recovery software asked for the WIndows (C partition size.  I used 500M thinking a D: pa

  • Record video using webcam in webapplication

    HI all, I have a requirement like, need to record video through webcam in my webapplication. can u please guide me how can do that. i dont know anything how to do this. please guide me in solving this requirement. thanx in advance