ConnectionExpireMinutes in OBIEE 11.1.1.7

Hi All,
I know that this topic was started while ago, however believe me, I've come through all of the post I found.
What I want to achieve is to set up a limit 20-30 minutes to run queries for end users.
What I've done so far is:
a) I set up this value via RPD - > Identity , etc ..... 20 minutes, Enable.
It works half way - after 20 minutes I get an error at Analytics, however this query is still running at Database side (sometimes more than 24 hours)
Then I followed another instructions and set up parameter in config file instanceconfig.xml like below
<Security>
<ConnectionExpireMinutes>20</ConnectionExpireMinutes> -- only this line is new
<ClientSessionExpireMinutes>210</ClientSessionExpireMinutes>
</Security>
After saving and restarting the servers - my Presentation Server is down.
Logs are below:
Exception occurred:
        Severity:5
        Type:PKN3saw9ExceptionE
        File:project/webutil/configreaderinstance.cpp
        Line:558
        Message:Invalid settings in config file: Bad config instance '/opt/app/obiee/fmw_home1/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml'!^M
^M
Unknown element 'ConnectionExpireMinutes'^M
^M
Element 'ConnectionExpireMinutes' is not valid for content model: 'All(AllowRememberPassword,ClientSessionExpireMinutes,LogonExpireMinutes,MaxTicketLifetimeMinutes,CookieDomain,CookieLifetimeMinutes,CookiePath,CookieSecure,HttpOnlyCookies,SecureCookieLifetimeMinutes,CookieByteLength,CheckUrlFreshness,FreshnessIdByteLength,EscapeFormulasForCSVAndExcelDownloads,MsgCRCChecking,SessionIDEntropySourceQuality,SessionIDCookieName,PersistCookies,EnableWebServerAuthInSoap,LogSessionIDWithNewClient,InIFrameRenderingMode,UserPopulationQueryTimeoutSecs)'^M
^M
I'm not an expert, however it looks like in version 11.1.1.7 there is no parameter like ConnectionExpireMinutes. Is it something relevant/similar ?
P.S. I've also tried to put this parameter within different tag than Security - it didn't work as well.
I really appreciate your help.
Thanks
Goli

Hi,
I can confirm that there is no "ConnectionExpireMinutes" option for the presentation server, the only "expire" setting allowed next to ClientSessionExpireMinutes is LogonExpireMinutes, but again this is more a way to logoff the user, I don't think it will cancel the currently running query on the DB.
Where did you got the "ConnectionExpireMinutes" from ?

Similar Messages

Kill OBIEE Session if it exceeds 15 mins in 10G

I want to know the steps to be performed if i need to kill a long running report automatically. I am using OBIEE 10G version.
I understand that ConnectionExpireMinutes is only for the sessions that are idle.
Please tell me how to configure such that report if running beyond 15 mins, cancles at OBIEE and Database both.

Another way to do this is to have a script running on the DB to kill any queries over (60*15) for that login. My experience with 10g, it is not good at killing queries when it hits the limit, the query might have run but the amount of time returning the data might cause an issue
Better to do it at the DB and use a read only user for OBI to connect to the DB so it can be easily be identified by the DBA's and not kill any ETL sessions

Setting a time out limit for OBIEE Queries

Hi Experts,
I am using OBIEE 11g. I have a scenario where I have to cancell a query if the query runs for more than 15 mins to fetch the data. The requirement is if the query takes longer than 15 mins the query to the database should be cancelled and in the OBIEE answers it should show the query cancelled message. Even if we are not able to show the exact message in answers is fine. But the front end and backend query must be cancelled after running for 15 mins.
Any help on this would be highly appreciated. Thanks in Advance.
Satyabrat

Hi,
Please try the following:
Add the below code in instanceconfig.xml
To set time to expire for Idle Oracle BI Presentation services Client connections.
<ConnectionExpireMinutes>Number of Minutes</ConnectionExpireMinutes>
Setting the Time to Expire for Oracle BI Presentation Services Client Sessions
<ClientSessionExpireMinutes>Number of Minutes</ClientSessionExpireMinutes>
And also try in RPD
Go to Manage-->Identity-->Application Roles
Select the ROLE and click on the permissions tab.
In the next wizard go to the “Query limits” tab.
Against the database row set the following values
Max Time Minutes=20
Status Max Time=Enable
For Custom messages for the error message:
Find error webmessage template and rewrite it in customMessages. For example:
<WebMessage name="kmsgCatalogAccessDenied" exception="true">
<TEXT>Отказ в доступе на <sawm:param insert="2"/> пользователю <sawm:param insert="3"/> по пути <sawm:param insert="1"/>.</TEXT>
</WebMessage>
Found this in catalogmessages.xml. Then I created file custommessages.xml in msgdb\customMessages:
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable system="CustomMessages">
<WebMessage name="kmsgCatalogAccessDenied" exception="true"><TEXT>Some other error message</TEXT></WebMessage>
</WebMessageTable>
</WebMessageTables>
It's possible not to show error message code.
There are a lot of perfect examples in the documentation.
Also Please refer the below link:
http://sranka.wordpress.com/2008/05/23/style-sheet-changes-custom-look-and-feel-in-obiee/
This should resolve your problem
Regards
MuRam

Error while running a KPI Watchlist in obiee 11g dashboard

I am getting the following error while running a KPI Watchlist :
*" Odbc driver returned an error (SQLExecDirectW) "*
I added two KPI's (KPI 1 & KPI 2)into that Watchlist , one from the default "Sample Sales Lite" (sub 1) and another from sub 2 which have essbase as data source .
KPI 1 (created from sub 1) is working fine , but while placing KPI 2 (created from sub 2 ) in the watchlist , its throwing the above error . However , while running KPI 2 individually , its showing meaningful results .
Let me know if the problem statement is not clear .
OBIEE version used : 11.1.1.5.0 .

Could anyone reply this thread. I am also getting the same error . Even server logs are also not helping.

OBIEE 11g - without going to Sawbridge first.....

If you called OBIEE via the default path: http://domain-name/analytics?NQuser=xxx&NQpassword=xxxx
instead of
http://domain-name/analytics/saw.dll?NQzuser=xxx&NQpassword=xxxx
would your credentials be checked by weblogic before the default login jsp has access to the request parameters or after?
Or does weblogic/OBIEE stop you passing parameters to the default URL?
What I'm trying to say is, if you go via the default domain without calling saw.dll first can you pass an encrypted password to your bespoke login.jsp (default.jsp) within the analytics domain and get this default.jsp
to convert the password to plain text and then this default.jsp calls (forwards) to saw.dll....

I have been trying to log in with my YouTube account name and password like usual. I just tried using my gmail log in and it works. Did they merge or something? It was working yesterday just fine without me changing the way I logged in. Either way, thanks for the help! Works great now
Message was edited by: EvoXFTW

Error while creating Bi presentation service in obiee(11.1.1.3)

Hi,
Im using Jdeveloper(11.1.1.5) and OBIEE(11.1.1.3)
I created a ADF application in Jdev and when I try to create a BI presentation services I'm getting the following error message.
*Connection attempt failed.*
*java.lang.RuntimeException: Unable to retrieve logon token. This version requires a BI build that implements the version 7 SOAP interface. Please verify that you are using the correct BI version.*
does the creation of presentation service in jdev(11.1.15) work only with OBIEE(11.1.1.5) and not OBIEE(11.1.1.3).
please help!
Thanks,
Venky
Edited by: Venky on Jul 26, 2011 2:02 PM
Edited by: Venky on Jul 27, 2011 6:18 AM

Venky,
The SOAP interface released with OBIEE 11.1.1.3 is version 6 (v6) as you can see from its WSDL URL.
This would leave one only to believe that the SOAP interface released with OBIEE 11.1.1.5 is version 7.

OBIEE error while scheduling the report.

Hi,
I scheduled one report in OBIEE tool for 8.30 pm but that report get failed.
I executed the same report many times with the same database configuration, same FTP configuration,
I never get such exception before.
In the morning i again execute that report with same configuration and it works.
I am unable to find the cause of the error.
bellow is the error description.
oracle.apps.xdo.servlet.scheduler.ProcessingException: java.sql.SQLException: ORA-01033: ORACLE initialization or shutdown in progress
could any body please explain what is the exact cause of the issue.

The oracle Db you are connected is being shut-down.

How to embed user credentials in Secured Web Service from OBIEE 11gFMW?

I am trying to invoke a webservice that I successfully exposed as a WSDL Web Service using EBS Integrated SOA Gateway. I am using OBIEE 11g Action Framework which uses WebLogic.
Here are the steps I completed:
- I exposed a WSDL web service in EBS R12 via Integrated SOA Gateway
- I granted the access to this service in EBS R12 to user SYSADMIN
- I used OBIEE 11g to make a Action to call the Web service (using Action Framework) by searching for the WSDL
- When I try to execute the action: I get the error:
Action could not be invoked.
ServiceExecutionFailure :
Error invoking web service HR_PHONE_API_Service at endpoint http://ip-10-87-33-3.ec2.internal:8000/webservices/SOAProvider/plsql/hr_phone_api/ Missing <wsse:Security> in SOAP Header
PROBLEM: I am unsure how to add the credentials for SYSADMIN user and password to add the SOAP username/pwd to the outgoing call. According to the documentation in the Integrators guide, FMW Security guide, and Web Logic guides..seems we have to configure the SOAP call to have the proper credentials. The documentation is not very clear on exactly how to do this. I tried to set up the credential store and an account in ActionFrameWorkConfig.xml but I am still missing something. I am logged into OBIEE as biadmin and I am trying to call a webservie in EBS that is granted to SYSADMIN/sysadmin user. Pls advise.

I am trying to invoke a webservice that I successfully exposed as a WSDL Web Service using EBS Integrated SOA Gateway. I am using OBIEE 11g Action Framework which uses WebLogic.
Here are the steps I completed:
- I exposed a WSDL web service in EBS R12 via Integrated SOA Gateway
- I granted the access to this service in EBS R12 to user SYSADMIN
- I used OBIEE 11g to make a Action to call the Web service (using Action Framework) by searching for the WSDL
- When I try to execute the action: I get the error:
Action could not be invoked.
ServiceExecutionFailure :
Error invoking web service HR_PHONE_API_Service at endpoint http://ip-10-87-33-3.ec2.internal:8000/webservices/SOAProvider/plsql/hr_phone_api/ Missing <wsse:Security> in SOAP Header
PROBLEM: I am unsure how to add the credentials for SYSADMIN user and password to add the SOAP username/pwd to the outgoing call. According to the documentation in the Integrators guide, FMW Security guide, and Web Logic guides..seems we have to configure the SOAP call to have the proper credentials. The documentation is not very clear on exactly how to do this. I tried to set up the credential store and an account in ActionFrameWorkConfig.xml but I am still missing something. I am logged into OBIEE as biadmin and I am trying to call a webservie in EBS that is granted to SYSADMIN/sysadmin user. Pls advise.

Date Variable in Obiee 11g

Hi All,
I have created a dynamic repository variable that gives the current date. The date is given in the following format 'MM/DD/YYYY'. This is format that I want the date to appear in. In the presentation catalog, I have created a presentation variable dashboard promt called StartDate, that defaults to the repository variable CurrentDate. I have also created a report that has a number of measures filtered in different ways. If we take one of the measures in the report, what I have done is edited the formula to filter the measure by reported_date>Date'@{StartDate}'.
Now when I got and see my dashboard I get an error, 'Datetime value 06/07/2011 from 06/07/2011 does not match the specified format'. However when I click 'Apply' on the prompt, the error does not appear and it just says that there is no data for this report.
Can someone please help me solve this problem?
Thanks,
Nikita

I solved this issue by using steps listed here http://gerardnico.com/wiki/dat/obiee/cast_as_date.
Thanks

Login issue in OBIEE 11g

Hi Experts,
We are using OBIEE 11g
We are facing the strange issue while accessing the presentation services login page.
I had uploaded the RPD file using EM,it is working for 1 hour with out any issue.
After some time the fallowing error is coming. then we are not able to access presentation services,
I had observed all the services are down in EM>Capasity manage ment tab.
Longing screen is coming ,but after entering the credentials ,it is showing login into…but not at all opening the window.
Error connecting to the Oracle BI Server: Could not connect to the Oracle BI Server because it is not running or is inaccessible. Please contact your system administrator.
Error Codes: WH4KCFW6:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 12002] Socket communication error at call=Connect: (Number=0) Call=NQRpc: An unknown socket communications error has occurred.
[nQSError: 12010] Communication error connecting to remote end point: address = SERVERNAME.com; port = 9706.
[nQSError: 12008] Unable to connect to port 9706 on machine SERVER_NAME.com.Please have your System Administrator look at the log for more details on this error. (HY000)
Thanks in advance.

Hi ,
I normally do this to fix this problem
1>Disable the network , keep the loopback adaptor enabled and then restart the services.
2> You can enable the network after services are restarted.
If you want a more practical solution and dont want to disable network again and again, then you would find the blog below useful.
http://www.rittmanmead.com/2012/08/obiee-fmw-and-networking-on-dhcp-hosts/
Hope this help.
Thanks,
Maqsood

Query is allocating too large memory error in OBIEE 11g

Hi ,
We have one pivot table(A) in our dashboard displaying , revenue against a Entity Hierarchy (i.e we have 8 levels under the hierarchy) And we have another pivot table (B) displaying revenue against a customer hierarchy (3 levels under it) .
Both tables running fine under our OBIEE 11.1.1.6 environment (windows) .
After deploying the same code (RPD&catalog) in a unix OBIEE 11.1.1.6 server , its throwing the below error ,while populating Pivot table A :
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
*State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 96002] Essbase Error: Internal error: Query is allocating too large memory ( > 4GB) and cannot be executed. Query allocation exceeds allocation limits. (HY000)*
But , pivot table B is running fine . Help please !!!!!
data source used : essbase 11.1.2.1
Thanks
sayak

Hi Dpka ,
Yes ! we are hitting a seperate essbase server with Linux OBIEE enviorement .
I'll execute the query in essbase and get back to you !!
Thanks
sayak

I cant able to create a new Analysis and Dashboard prompt in OBIEE 11g

Hi Gurus,
i try to create a new Analysis in OBIEE 11g in (brower: ie,Google chrome, Mozila), i got the error "*unterminated string literal*" and "*Exception at function updateSelectionsPanel: unterminated string literal*".
and i try to create a new Dashboard Prompt using column prompt when i select the column i don't get the filter form and not to be add the column prompt in the Dashboard Prompt.
Thanks,

Moving this discussion to the Adobe Creative Cloud forum.
Kriskristferson if you are facing difficulties with your order then please contact our support team directly at Contact Customer Care.

Error in Privileges of OracleSystemUser in OBIEE 11g

Hi,
We are encountering an error with OracleSystemUser.
The policy referenced by URI "oracle/wss_username_token_client_policy" could not be retrieved as connection to Policy Manager cannot be established at "t3://servername:7001,servername:9704" due to invalid configuration or inactive state.
*<Warning> <oracle.wsm.resources.policymanager> <WSM-02310> <Failed to retrieve requested documents due to underlying error "java.rmi.AccessException: [EJB:010160]Security Violation: User: 'OracleSystemUser' has insufficient permission to access EJB: type=<ejb>, application=wsm-pm, module=wsm-pmserver-wls.jar, ejb=DocumentManager, method=retrieveDocuments, methodInterface=Remote, signature={java.lang.String,java.util.Map}.". The operation will be retried.>*
After successfully integrating Active Directory in Weblogic, the error was triggered while implementing privileges to dashboard objects. Currently, we can login to Weblogic and EM but we cannot login to Analytics. All logs in the BI Server and Admin Server logs show the above error.
Please help, thank you
Edited by: 878720 on Sep 27, 2011 8:19 PM
Edited by: 878720 on Sep 27, 2011 8:19 PM
Edited by: 878720 on Sep 27, 2011 8:19 PM

Hi,
Please Change control flag of default authentication provider (in weblogic domain) from REQUIRED to SUFFICIENT . More on control flag in WebLogic Authentication Provider
Refer :
http://onlineappsdba.com/index.php/2011/06/21/unable-to-login-to-obiee-anylytics-after-oid-integration-user-was-authenticated-but-could-not-be-located-within-the-identity-store/
Thanks
Deva

OBIEE 11g: Dashboard Javascript Issue

Hi Gurus,
We have upgraded obiee from 10g to 11g and finding issues with javascript in a dashboard.
Functionality: There are some custom labels showing prompt values in it with large font. When user change prompt value and Apply, it should change the value of those text as well.
In 10g its running fine, but in 11g its not happening after we change the value of prompts. I found the following Javascript is responsible for this functionality. Even I saw one thread to suggest the exactly same code, but in 10g.
<script type="text/javascript">
(function(){
var tblTag = document.getElementsByTagName('table');
var tdElem= document.getElementsByTagName('td');
for(m=0;m<tdElem.length;m++){
if(tdElem[m].className=='GFPSubmit'){tdElem[m].childNodes[0].tBodies[0].rows[0].cells[0].childNodes[0].childNodes[0].innerHTML='Run Report';
}//close if statement
}//close for loop
}// close function clickVal()
</script>
Thread:
Change Go Button Text on Prompt Only
I need to understand what its actually doing? and Does it really work in 11g? Whats the alternative code?
Thanks in advance.

In 10g these are the html objects, after upgrade you need to know the html objects for that report based on that you need to modify javascript code.
From given code, activity is doing on these objects; You need to find out the equivalent object name for 'GFPSubmit' in 11g.
GFPSubmit
table
td
If make sense mark

Error while using between operator with sql stmts in obiee 11g analytics

Hi All,
when I try to use between operator with two select queries in OBIEE 11g analytics, I'm getting the below error:
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <select>: Syntax error [nQSError: 26012] . (HY000)
can anyone help me out in resolving this issue.

Hi All,
Thank u all for ur replies, but I dint the exact solution for what I'm searching for.
If I use the condition as
"WHERE "Workforce Budget"."Used Budget Amount" BETWEEN MAX("Workforce Budget"."Total Eligible Salaries") AND MAX("Workforce Budget"."Published Worksheet Budget Amount"",
all the data will be grouped with the two columns which I'm considering in the condition.
my actual requirement with this query is to get the required date from a table to generate the report either as daily or weekly or monthly report. If I use repository variables, variables are not getting refreshed until I regenerate the server(which I should not do in my project). Hence I have created a table to hold weekly start and end dates and monthly start and end dates to pass the value to the actual report using between operator.
please could anyone help me on this, my release date is fast approaching.

ConnectionExpireMinutes in OBIEE 11.1.1.7

Similar Messages

Maybe you are looking for