Connections stuck

connections are not being released by an ODI process.
is this something to be configured in ODI?
J

Are talking about stale session ?

Similar Messages

  • Itunes froze, now NANO frozen with "CONNECTED" stuck on screen!!!!!!!!!!!!!

    Hello
    Itunes froze, so i couldn't eject the ipod. I then tried to eject it in the Windows task bar, this then froze. So i restarted the computer and took out the ipod and now the nano is truly frozen with "connected" stuck on the screen, the ipod is totally unresponsive.
    Please advise
    Thank you much

    Mine did the exact same thing! I called apple and went through the whole name and email address thing. push the center and menu button and the same time. When an apple symbol shows up let go of the buttons and then your regular menu should be fine

  • IMac 27" with Win7, Apple bluetooth keyboard not connected, STUCK.

    I made a huge (and naive and stupid) mistake and now have an iMac stuck at the Win7 boot screen because it can not find the keyboard. I can't boot it back into OSX either because the keyboard OPT key is not recognized. Here is what happened:
    My iMac 27" was working perfectly in dual boot mode and I could arbitrarily boot in either OS without problem since 3 months. Well, today, a friend called and said that her Apple keyboard is not recognized by Win7 on her iMac and she can not type. So I made sure that the battery is good and the green light is on, then I told her to go into the bluetooth device panel and remove the keyboard then re-pair it again. My thought was that I have done that with all bluetooth devices in Windows without problem, and Apple hardware and software is solid, so that got to work without a glitch, right. WRONG. She struggled to pair and connect the keyboard in Win7 to the point that I said I will remove my keyboard device and reconnect it so I can tell her the exact steps. Well, I learned the hard lesson with Apple stuffs myself. After removing the keyboard device, I could pair it, but not without difficulty. Then, however, does not connect, since I could not type and the device driver says that the device can not be started. Then I read messages in the Apple forum recommending to boot up in to OSX to remove the device there and boot it back into Win7 to pair it. OK. I used the mouse to shut down the Win7 and forgot that I have no keyboard now. I couldn't have used Boot Camp control panel to boot into OSX but I was so confident in Apple that I did not think about it. Now, I am stuck with a machine that boots into Windows without stopping and hangs at the first screen because the keyboard is missing. I inserted the OSX DVD in the hope that it would boot from the DVD but it does not. And the DVD is of course stuck in the drive. I am working at a remote location and do not have a usb keyboard or anything else.
    Can anyone recommend a procedure to boot into OSX in my situation? Or can anyone tell me if I can pair and connect the keyboard in the BIOS? I googled but could not find anyone in a similar situation like mine. My friend can take her machine to Apple store for service, but I am in a country that has no Apple store.
    Thank you very much for any hint.
    tom

    I don't know but I installed my Windows 7 with Bootcamp without using a USB keyboard (cuz I don't have one). But you will at least need a USB mouse though. The moment it requires me to use keyboard input for various of information the bootcamp already downloaded required drivers and updates for my wireless keyboard to work. Make sure your wireless keyboard are on and try type something on it (it goes into some sort of sleep mode when you first start it).
    Message was edited by: Aetherbomb

  • My sony DCR-SR68 will not connect, stuck on "preparing"

    I have tried to connect my sony DCR-SR68 via USB cable, the camera displays proper screen (to choose USB connection for the internal HD), I choose the USB connect, then the screen stays stuck on "preparing."
    It's supposed to be communicating with the computer, but it stays like this for well beyond 30 minutes.

    If you are attempting to use the camera with iMovie Apple publishes iMovie ’11 Supported Cameras this located by clicking
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    In checking it appears your camera is supported, now all you need to do is learn to use iMovie. I would recommend getting started by clicking
    https://www.apple.com/support/mac-apps/imovie/

  • 2008r2 Connections stuck in SYN_Received

    I have been pulling my hair out on this issue for a while now and not really getting anywhere.
    I am seeing issues whereby connections are regularly getting stuck in SYN_RECEIVED the main place this is manifesting is port 80 but also see if on port 443. Server is 2008r2 running IIS, MySQL and AD (I know not ideal and should be an immediate redflag,
    customers server who won't change so not a lot I can do about this in the short term) This is often manifesting as sites being unavailable to clients and our monitoring software picking up site down with Socket error #10060.
    Windows firewall is off
    I have installed the hotfix suggested here: https://support.microsoft.com/kb/2786464
    I suspect SYN protection is kicking aggressively but have no real way that I have found of tuning it down (I suspect the fact that the server is a DC is making it more aggressive) 
    It has made some difference but not fixed the problem as yet.
    "netsh interface tcp show global" is currently returning:
    Querying active state...
    TCP Global Parameters
    Receive-Side Scaling State                : enabled 
    Chimney Offload State                      : disabled 
    NetDMA State                                  : enabled 
    Direct Cache Acess (DCA)                 : disabled 
    Receive Window Auto-Tuning Level    : normal 
    Add-On Congestion Control Provider  : ctcp 
    ECN Capability                                 : disabled 
    RFC 1323 Timestamps                      : disabled 
    Initial RTO                                       : 3000 
    Non Sack Rtt Resiliency                    : disabled 
    Max SYN Retransmissions                 : 4 
    NIC is a Broadcom BCM5716C NetXtreme II GigE
    Any help at all would be appreciated.

    We don't have any "Tcp..." data entries past "HKLM\...\
    Parameters".
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
    I am getting SYN_RECEIVED on 3 different servers.  And, each server is multi-IP'd.
    The SYN_RECEIVED are listed on all IPs on all servers.  Each grows to about 15 entries and then TCP Connect problems are thrown.
      Proto  Local Address          Foreign Address        State
      TCP    192.168.19.190:443      91.121.72.39:397       SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:6729      SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:8797      SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:15516     SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:22077     SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:25748     SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:39583     SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:42428     SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:48337     SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:51466     SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:53885     SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:55890     SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:60415     SYN_RECEIVED
      TCP    192.168.19.190:443      91.121.72.39:63859     SYN_RECEIVED
      TCP    192.168.19.190:445      192.168.16.54:13817     ESTABLISHED
      TCP    192.168.19.190:3389     192.168.17.32:54885     ESTABLISHED
      TCP    192.168.19.190:49220    192.168.19.47:445       ESTABLISHED
      TCP    192.168.19.190:49457    192.168.19.48:445       ESTABLISHED
      TCP    192.168.19.190:50457    192.168.16.96:389       ESTABLISHED
      TCP    192.168.19.190:50810    192.168.19.47:445       ESTABLISHED
      TCP    192.168.19.190:50912    192.168.16.122:445      ESTABLISHED
      TCP    192.168.19.190:50937    192.168.19.47:445       ESTABLISHED
      TCP    192.168.19.190:51186    192.168.19.48:445       ESTABLISHED
      TCP    192.168.19.190:51537    192.168.16.122:445      ESTABLISHED
      TCP    192.168.19.190:51986    192.168.19.48:445       ESTABLISHED
      TCP    192.168.19.190:54424    192.168.19.47:445       ESTABLISHED
      TCP    192.168.19.190:57270    192.168.16.244:65513    ESTABLISHED
      TCP    192.168.19.191:443      91.121.72.39:5084      SYN_RECEIVED
      TCP    192.168.19.191:443      91.121.72.39:29556     SYN_RECEIVED
      TCP    192.168.19.191:443      91.121.72.39:46117     SYN_RECEIVED
      TCP    192.168.19.191:443      91.121.72.39:46992     SYN_RECEIVED
      TCP    192.168.19.191:443      91.121.72.39:53293     SYN_RECEIVED
      TCP    192.168.19.191:443      91.121.72.39:57470     SYN_RECEIVED
      TCP    192.168.19.191:443      91.121.72.39:62943     SYN_RECEIVED
      TCP    192.168.19.191:443      192.168.126.113:57564   ESTABLISHED
      TCP    192.168.19.191:50829    192.168.19.191:80       TIME_WAIT
      TCP    192.168.19.192:50551    192.168.19.223:1433     ESTABLISHED
      TCP    192.168.19.192:50812    192.168.19.223:1433     TIME_WAIT
      TCP    192.168.19.192:50818    192.168.19.223:1433     TIME_WAIT
      TCP    192.168.19.192:50819    192.168.19.223:1433     TIME_WAIT
      TCP    192.168.19.192:50822    192.168.19.223:1433     ESTABLISHED
      TCP    192.168.19.192:50824    192.168.19.223:1433     ESTABLISHED
      TCP    192.168.19.192:50825    192.168.19.223:1433     ESTABLISHED
      TCP    192.168.19.193:443      91.121.72.39:5559      SYN_RECEIVED
      TCP    192.168.19.193:443      91.121.72.39:5628      SYN_RECEIVED
      TCP    192.168.19.193:443      91.121.72.39:12447     SYN_RECEIVED
      TCP    192.168.19.193:443      91.121.72.39:21498     SYN_RECEIVED
      TCP    192.168.19.193:443      91.121.72.39:28469     SYN_RECEIVED
      TCP    192.168.19.193:443      91.121.72.39:29096     SYN_RECEIVED
      TCP    192.168.19.193:443      91.121.72.39:42189     SYN_RECEIVED
      TCP    192.168.19.193:443      91.121.72.39:58227     SYN_RECEIVED
      TCP    192.168.19.193:443      91.121.72.39:63323     SYN_RECEIVED

  • O2wifi can't connect / stuck in a login loop

    Does anyone else have trouble signing in to O2wifi. I just get stuck in an endless loop ?
    It recognises me "Hi Luke, welcome back", says press here to continue, does the grey circles, and then returns to the start.
    I'm using a HTC M8one, running android 5.0.1. I've got the O2wifi app installed and registered. I've failled to log-in everywhere from McDonald's, to Costa, even at the O2 shop!

    viridis wrote:
    rosadosc wrote:
    Hi @lukew151 Have you tried removing the connection (making your phone forget) to the O2 wifi and searching again?Unfortunately if it's one of the modern devices you cant . O2 wifi will be a permanent connection as i myself just found out...It's hard wired if you have o2 firmware on your phone.

  • Connection stuck on ADSL Max months after exchange...

    Hi all
    My exchange was upgraded to ADSL2+ nearly 12 months ago, but my connection is still running at the previous ADSL Max 8Mb sync speed. I'm using a Vigor 2710n router and my stats are as follows:
    show adsl
      --------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
       Running Mode            :    G.DMT       State                : SHOWTIME
       DS Actual Rate          :  8128000 bps   US Actual Rate       :   448000 bps
       DS Attainable Rate      : 10560000 bps   US Attainable Rate   :  1244000 bps
       DS Path Mode            :  Interleave    US Path Mode         :  Interleave
       DS Interleave Depth     :       32       US Interleave Depth  :        4
       NE Current Attenuation  :       21 dB    Cur SNR Margin       :       14  dB
       DS actual PSD           :    20. 0 dB    US actual PSD        :    12. 3   dB
       ADSL Firmware Version   : 232201_A
      -------------------------------- ATU-C Info ---------------------------------
       Far Current Attenuation :       14 dB    Far SNR Margin       :       24  dB
       CO ITU Version[0]       : 00005453       CO ITU Version[1]    : 00005443
       DSLAM CHIPSET VENDOR    : < TI >
    These stats haven't changed since the days of my being on an ADSL Max connection. I'm not an expert at this but I believe that my Attenuation & SNR Margin figures are high enough to get ADSL2+ speeds. The fact that the modulation type is showing as G.DMT rather than ADSL2+ (G992.5) suggests to me that i'm still stuck on the old ADSL Max profile.
    I've made several calls to BT support (India) and get different fob offs each time - that my line is operating within spec, that speeds above 8Mb are only avaiulable if I upgrade to Infinity (!) etc etc. During the last call about a month ago (case vol011-60207770173) I was told that they would reset the SNR marginand that the line would retrain over the next 10 days or so. Nothing changed at any stage on the router - stats remained as above.
    I'm paying for an ADSL2+ product my profile seems stuck on ADSL Max. If anyone has any suggestions as to how to get this looked at properly by BT then please let me know.
    Thanks,
    Mark Denton
    Solved!
    Go to Solution.

    Provided that you are sure that your router setting are not locked to G.DMT (have you got a home hub you can try?)
    Then
    If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to help you get to the bottom of the problem.
    They can be contacted using this link BT Care Team
    They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • AnyConnect (SSL VPN on IoS) - Connection stuck on Android

    Hiya,
    I have an Any Connect WebVpn (ssl vpn?) set up on an IOS 15.2(4)M4. My current WebVPN is set up for Cisco Phones to use SSL VPN to connect to a Cisco Call Manager (CUCM 9.x). I also tried connecting with an Any Connect client from a PC and it seems to work fine.
    The issue is when I try to connect through an Android device, I get the following output from 'debug webvpn':
    Jan 10 16:04:17.192: WV: sslvpn process rcvd context queue event
    Jan 10 16:04:17.192: WV: sslvpn process rcvd context queue event
    Jan 10 16:04:17.220: WV: sslvpn process rcvd context queue event
    Jan 10 16:04:17.224: WV: sslvpn process rcvd context queue event
    Jan 10 16:04:17.224: WV: Entering APPL with Context: 0x242D9C30,
          Data buffer(buffer: 0x242F2930, data: 0xD9E7658, len: 0,
          offset: 0, domain: 0)
    Jan 10 16:04:17.224: WV: Fragmented App data - buffered
    Jan 10 16:04:17.224: WV: Entering APPL with Context: 0x242D9C30,
          Data buffer(buffer: 0x242F2470, data: 0xEA4D858, len: 884,
          offset: 0, domain: 0)
    tbr-edi-2901#
    Jan 10 16:04:17.224: WV: http request: / with no cookie
    Jan 10 16:04:17.224: WV: validated_tp :  cert_username :  matched_ctx :
    Jan 10 16:04:17.224: WV: failed to get sslvpn appinfo from opssl
    Jan 10 16:04:17.224: WV: Error: Failed to get vw_ctx
    Jan 10 16:04:17.224: WV: Appl. processing Failed : 2
    Jan 10 16:04:18.344: WV: sslvpn process rcvd context queue event
    Jan 10 16:04:18.348: WV: sslvpn process rcvd context queue event
    Jan 10 16:04:18.376: WV: sslvpn process rcvd context queue event
    and then the messages in italics above keep on appearing in an endless loop.
    Any ideas what could be the issue.
    Any help is highly appreciated.
    Thanks,
    David

    Hi,
    I'm having the same issue please let me know if yo found the solution. Thanks in advance

  • Itune connect stuck on waiting for application upload

    hello
    after one waiting for my app review it was rejected because it had iTouch on its name
    now i have changed the name, updated metadata, and created new binary
    but i don´t have any way of uploading it now
    the button to update binary that appeared after being rejected is now gone
    i tried to use application loader and it reports upload success but on the app status keeps showing waiting for upload
    i am getting crazy with this...
    so much bureaucracy and lack of communication keeps me too away from developing that is what i was supposed to be doing

    agreed. Apple's developer support for iPhone app writers have been a joke, My app has been going through the hoops in itunes connect, but i never know if there is something i should be doing to get it further. The least they could do is have a simple FAQ which explains what you need to do for each step and how long the overall process is expected to take.
    [email protected] is worthless too and never replies. Cmon guys, i need something more than the automated response.

  • New connection stuck on ADSL instead of ADSL2

    Hi,
      I'm on a long line and get 1mb out of ADSL Max, but BT wholesales own ADSL Availability Checker states that I should expect 0.75 to 2.5 from ADSL Max or 1 to 3.5 from ADSL 2+.
      So as ADSL 2+ shoudl result in a slightly higher speed how do I switch?
      I've already tried speaking to the support team who first of all didnt know what G.992.1 was - not a good sign for Broadband support. They then said i needed to speak to the sales team... guess what they said? Speak to support!
      Any ideas who I should contact? Please dont say support or sales

    My line stats from the home bug 3 are below. I dont usually use it, i use my own equipment as I need to run VPNs and load balance with a satellite connection to get anything even approaching broadband.
    I've been trying to get BT to look at the line over the past few weeks already as the FEC errors have shot up significantly along with a speed decrease. Firstly I was told that cable theft left people in Cheltenham with no service and that this was affecting me (despite me having service, it just being reduced). Then after this was cleared I was told that it needed escalating to an engineer who would phone the next day. They just said my exchange was undergoing major maintainence for 48h and it would be resolved after that... guess what, it still isnt.
    So i'm desperate to get both my old 1.2mb speed back and also to get any form of increase I can. I'm already using a microfilter faceplate which gives me the same sync speed as a microfilter into the test socket of the master socket. I've tested that it's nothing internal resulting in my speed drop (tried 2 modems, 2 cables, 1 MF face plate and 1 micro filter).
    ADSL Line Status
    Connection Information
    Line state:
    Connectedppp0_3
    Data Transmitted/Received (GB):
    0.0 / 0.0
    Downstream:
    960 Kbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    6.0 dB / 10.0 dB
    Line attenuation (Down/Up):
    66.9 dB / 30.5 dB
    Output power (Down/Up):
    16.6 dBm / 12.5 dBm
    FEC Events (Down/Up):
    902 / 0
    CRC Events (Down/Up):
    0 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    0 / 0
    Error Seconds (Local/Remote):
    0 / 0

  • Ftp through ASA stuck @ Opening data connection

    hi,
    i have a problem with an ASA and connect from outside to an inside ftp server. The connection stuck at Opening data connection....
    [R] 227 Entering Passive Mode (<external ip>,198,49).
    [R] Opening data connection IP: <external ip> PORT: 50737
    [R] QUIT
    [R] 221  Have a nice day.
    [R] Logged off: <external ip>
    I have configured an ACL for FTP and FTP-DATA and activate inspect rule.
    Any suggestions?
    Thanks and regards
    Jason

    Hi Sankar,
    I dont know if you are able to assist as i am having a similar issue.
    I had issues in the past  connecting to external ftp sites so i created an inspection rule on my wan interfaces and ask any staff trying to connect to any ftp site to send me the ip address so i can add under the inspection rule and this has always worked for me.
    I had to do this because we also have ftp sites internally that people try to connect to from outside too.
    But lately ,i have done this for an external ftp site and it connects but doesnt list directories.
    The log message is
    terminated by inspection engine,reason -inspector drop reset.
    Below is the internal host trying to connect to the ftp server service policy command output :
    External ftp server is 81.144.145.6.
    # sh service-policy flow tcp host x.x.x.x host 81.144.145.6 eq ftp
    Global policy:
      Service-policy: global_policy
        Class-map: cmap
          Match: access-list TCP
            Access rule: permit tcp any any
          Action:
            Input flow:  set connection advanced-options tmap
        Class-map: netflow-export-class
          Match: access-list netflow-export
            Access rule: permit ip any any
          Action:
            Output flow:  flow-export event-type all destination 10.120.3.226 10.120                                                                                        .16.220
        Class-map: class-default
          Match: any
          Action:
            Output flow:
    Interface MAN_CORE_TO_WAN:
      Service-policy: STV_IPS_POLICY
        Class-map: STV_IPS_CLASS
          Match: access-list STV_IPS_ACL
            Access rule: permit ip any host 81.144.145.6
          Match: default-inspection-traffic
          Action:
            Input flow:  inspect ftp
        Class-map: class-default
          Match: any
          Action:
            Output flow:
    Interface MAN_CORE_TO_WAN_ELXSI:
      Service-policy: STV_IPS_POLICY
        Class-map: STV_IPS_CLASS
          Match: access-list STV_IPS_ACL
            Access rule: permit ip any host 81.144.145.6
          Match: default-inspection-traffic
          Action:
            Input flow:  inspect ftp
        Class-map: class-default
          Match: any
          Action:
            Output flow:
    Interface MAN_CORE-TO-WAN-THUS:
      Service-policy: STV_IPS_POLICY
        Class-map: STV_IPS_CLASS
          Match: access-list STV_IPS_ACL
            Access rule: permit ip any host 81.144.145.6
          Match: default-inspection-traffic
          Action:
            Input flow:  inspect ftp
        Class-map: class-default
          Match: any
          Action:
    I just cant understand why it has worked for tens of external ftp sites and it doesnt work for this particular one.
    Cheers

  • X201 win7 centrino 6200 agn, cannot connect to 11g router

    My X201 is win7 and with intel centrino 6200 agn wifi chipset. I can use wifi at work (which is 11n AP). However, my home is using an 11g dsl router, and the wifi connection stuck. It kept trying to connect to the router but failed. I pluged in a USB 11g wifi adapter and got connected within a second. Is there anyboy having the same problem? This really pissed me off....

    Is it encrypted? You're gonna have to give a lot more details if you expect any help.
    Owned Thinkpads: X300 X201T X200,T X61,s,T,T+ X60,s,T,T+ X41 X40 X31 T510 T500 T410 T400 T400s T61,p T60,p T43 T42 T41,p T40 W500 W700. To do list: X301 X220 X220T X201 X201s X200s X201i T420s T410s T420 T520 W510 W701

  • Itunes froze now NANO is frozen with "CONNECTED" showing on nano screen!!!

    Hello
    Itunes froze, so i couldn't eject the ipod. I then tried to eject it in the Windows task bar, this then froze. So i restarted the computer and took out the ipod and now the nano is truly frozen with "connected" stuck on the screen, the ipod is totally unresponsive.
    Please advise
    Thank you much

    With so many people visiting this problem and so many people willing to comment about it Apple needs to fix this problem. I experienced this problem twice until I came to the website and it suggested the folling pressing Menu and the center button at the same time and hold it between 6 to 8 seconds. It works. The problem is that if it happen to me twice in one week it will happen many time. APPLE, FIX YOUR BUGS!!!!!!!!!!!!!!!

  • 5.9.901 puahing.  Anyone get it?

    Widely reported on other forums.  Anyone know anything about it?
    RMD

    Per Droid-Life:
    Here are the changes:
    Application Updates/Improvements
    Preload VCast Apps Store
    Preload Sling stub application
    Preload MOG stub application
    VZNavigator preload updated to version 7.2.0.452
    Youtube videos restart after pausing to access Notification Panel
    Youtube screen flashes when Back key pressed during video play
    Voice call muted while composing a Visual Voiceamail message
    Visual Voicemail saves messages to internal memory with UI displaying SD card target
    Visual Voicemail delete actions sends delete and save commands to the server
    Data Connectivity
    Stuck in 3G mode in strong 4G coverage
    No 4G data connectivity
    No LTE service in LTE only service areas (Hagerstown, MD)
    Patch for Alcatel-Lucent LTE infrastructure R9 support
    Dual IMSI support
    Excessive LTE handover attempts (SIB8 messaging processing)
    Improvements in Wi-Fi Mobile Hotspot LTE download performance
    Device Operation
    OTA update needs to utilize Admin APN
    Support for National Plus Code Dialing
    Cannot play WAV files
    Support for Bluetooth Personal Area Networks (PAN)
    Missing SMS alerts while on voice calls
    Choppy audio while streaming via to a TV via HDMI
    No Bluetooth audio when paired and connected
    Stability/Performance Improvements
    Black screen lockups
    Reduced idle resets
    Voice call drops when SMS message is received
    Lockups when XT875 is in the multimedia dock
    Resets after camera multi-shots are taken
    Internal memory file creation dates shown as December 31, 1969
    Clock widget time does not match Notification Panel time

  • Printer frustration

    Installed new HP LaserJet P1105w.  Printed two or three times and can not get it to print now.  Router is also new as is Pavilion 23 computer.  I am oblivious as how to print Network configuration page since my printer will not print and I don't know where to find that information.
    This question was solved.
    View Solution.

    Hi Gundis, sorry to hear things aren't going easily with the printer.  I found a few links that should work with your model of printer, I hope they help.
    Printing a Configuration Page
    Printer Does Not Maintain Wireless Connection
    Stuck print jobs
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Maybe you are looking for

  • Printing is mirrored on Brother MFC-210; no print settings in Print Dialog

    I recently purchased a new iMac. I transfered the contents of my Powerbook to the iMac. When I try to print to my Brother MFC-210 printer from any application, the result is reversed (mirrored). On my Powerbook, the Print Dialog box for the MFC-210C

  • Acrobat X Pro won't open not long after CS6 upgrade

    I upgraded to CS6 from CS4 just before the new year. I have been having problems with my computer being slow and noticed after installation that the 2 previous versions I had were still installed (silly me thought upgrades would just override these h

  • How to save input from radio buttons into textfiles, Help

    Below is my code. Currently it gets the input from the textbox "Date" and places it into a textfile using "getText" How do i get the input from a radio button? i think getselected only works on JLists. String a = bookNo.getText();           out = new

  • How to replace the inverter cable? screen gone black in MacBook

    Hi There is no apple service provider in my location. Can I replace the inverter cable without having to take the MacBook to an apple store? is it easy to do? and can I use any inverter cable? or does it have to be especially designed for Macbook? I

  • Unable to pair BT devices on Broadcom BCM43142 - broadcom-wl driver

    I'm having problems to get my Bluetooth device to work. I have a Broadcom BCM43142 which is unsupported by the open-source modules in Linux, so I'm stuck at using the Broadcom-wl driver. I'm using Gnome Shell and the GUI does not give much informatio