Connectivity adapter cable and pc suite

Hiya peeps wondering if anyone can help ...........I recently bought a connectivity adapter cable for nokia 6610i and a nokia 1601....the set up completes up to the point of saying connect the cable to the pc then to the phone the hour glass comes on and i have waited for over an hour for set up to carry on but nothing happens it just stays on the hour glass.........I am running windows xp pro service pack 2 i have a ca-42 data cable as recommended by nokia website i have downloaded the latest pc suite for my phones and still no luck ppppppppppllllllllllllzzzzzzzzzzz help thankyou

well i have great news for some reason the first time i tried to connect the cable to all the usb ports (one at a time of course) it didnt work but i restarted my computer each time i connected to a different one and now its workin woohoooooo thankyou for the suggestions ........one happy nokia user

Similar Messages

I have connected my ipad to my computer and logged into iTunes website. To restore my Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to resto

I have connected my ipad to my computer and logged into iTunes website. On my iPad to restore my my data Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to restore from the website. Can you help me please? the 2 replies, I thank you, but this has not helped with my problem.

Your post is somewhat confusing. To restore your iPad you use the iTunes application on your computer and connect your iPad. Select your iPad in the left column of iTunes on your computer and select General in the right column. You should find the restore choice there.

Port is down down if I connect the cable and its limited connectivity

Dear All,
I have 4506 with WS-X4648-RJ45V+E. If I connect the cable on one port it is showing down down and on PC it is limited connectivity.
Please suggest.
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.02.00.XO RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 22-Sep-11 20:42 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
Image text-base: 0x100A12B4, data-base: 0x13F29B60
ROM: 15.0(1r)SG3
Jawa Revision 7, Winter Revision 0x0.0x3
DLD-03-4506 uptime is 10 weeks, 2 days, 2 hours, 47 minutes
System returned to ROM by power-on
Running default software
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Information for 'WS-X45-SUP7L-E'
License Level: lanbase Type: Permanent
Next reboot license Level: lanbase
cisco WS-C4506-E (MPC8572) processor (revision 4) with 2097152K/20480K bytes of memory.
Processor board ID SPE1625010J
MPC8572 CPU at 1.5GHz, Supervisor 7L-E
Last reset from PowerUp
2 Virtual Ethernet interfaces
244 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Thank You,
Abhisar.

Dear Leo,
TAC has suggested to upgrade IOS because of BUG.
https://tools.cisco.com/bugsearch/bug/CSCsv15915/?reffering_site=dumpcr
Thank You,
Abhisar.

Firewire Solution? USB To Express Card Adapter Cable + Firewire Expresscard

Has anyone tried this as a possible solution for getting firewire on their macbook 13.3 unibody? In theory it would seem that you could use this USB To Express Card Adapter Cable and plug in a firewire expesscard. Anyone tried it?
http://usb.brando.com.hk/mini-usb-to-express-card-adapter-cable_p00783c042d015.h tml

Also... as they went through the trouble to specifically indicate the compatible cards, I would imagine there are known incompatibilities with other card types. None of the cards they list would have difficulty over USB. Each of these cards already have similar counterparts that are available to connect directly to USB (vs. using an express card). This would seem most useful for people that may already have express cards that they use in other notebooks so they could use them in a machine without an express card slot... otherwise I would imagine people would just get the USB versions of these devices. USB hubs can obviously connect directly to a USB port, memory card readers are also available for connecting directly to a USB port. RS232 is pretty dated and USB can easily handle RS 232 throughput. I'm not exactly sure what a printer card is... but printers generally connect via USB (or parallel in older machines)... again... very easy for USB to handle. In order for it to work with firewire, they would have to have a hardware translator built into it. I'm sure they would list firewire if it was an option.

Can't connect to internet using Nokia Suite

Hello. I have a Nokia Asha 311. I could connect to internet using my USB cable and Nokia Suite without trouble in another computer similar to the one I'm using now. The difference is that that computer had windows 7 and this one has Windows xp (probably there are more differences, but this is the most noticeable). I have Nokia Suite version 3.8.48, it recognizes my phone, but everytime I tried to connect to the internet using the phone as modem, it says, inmediately (it isn't even trying to connect) "Failed to establish a network connection"
What can I do? If I was able to use my Nokia Asha 311 in the other computer as a modem, I'm sure I can use here too for that. But there is something preventing it from working well. What can it be? I have already read the other posts about similar issues but I haven't found any solution in them.

Hi overo,
Welcome to the forum!
Is the OS of your Windows XP PC updated? It's advisable to keep both PC and phone's software up-to-date. Try also to repair Nokia Suite to isolate the issue. Just click the PC's start button, and then go to All Programs > Control Panel > Installed applications. Select Nokia Suite, and then choose Uninstall / Change > Repair. After this step, try to share our phone's connection to your PC and see if it'll work. Make sure that Nokia Suite mode is selected in your Asha 311 when sharing the internet connection to your PC via Nokia Suite.
Let us know how it will go.

Problem with apple mini dvi to video adapter cable

I recently bought an apple mini dvi to video adapter cable and all that it would display on my television screen was black and white colors. The quality of the screen seemed to be okay but it was hard to tell since i did not have any color. Is there something that i can do to fix this problem

Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
Dicko

ITunes doesn't find Airtunes when connected with cable, only WiFi

I have an Apple TV with Airtunes enabled. But apparantly, it's not possible to connect to it from PC's who are connected to LAN with cable instead of WiFI? Does anyone know why?
More details:
I have 3 PC's:
PC 1: , Windows 7 64-bit with iTunes 9.1.1.12 (latest)
Stationary, connected to LAN using cable in a Gigabit switch
PC 2: 100% fresh install of Windows 7 32-bit and iTunes 9.1.1.12
Stationary, connected to LAN using cable in a Gigabit switch
PC 3: Win 7 32-bit with iTunes 9.1.1.12
Netbook - connected through WiFi
Apple TV device (latest firmware) is connected to same LAN using cable as well. *All PC's can ping the Apple TV without problems.*
So the problem is that iTunes doesn't find the Airtunes device (the output dropdown selector doesn't show up). I first tried on my main PC (PC1). It didn't work, so i tested on PC2 (wich is a fresh install of both OS and iTunes!), but same problem there.
But then the weird thing happened. I tried to install on my netbook, and it worked! Only difference is that the netbook was connected through WiFi. I don't see why that would matter, but just for fun i tested to disconnect WiFi, and connect with cable and boom - airtunes selection dissappeared! As soon as I disconnected the cable and reconnected WiFi, it appeared again.
Why on earth would Airtunes only work on WiFi? As you can see on this screenshot, network configuration is equal on Wifi and cabled connection. (Apple TV has IP 10.0.1.30)

It's supposed to be able to cope with slightly different file & folder structures, missing track numbers, all tracks in just an artist folder, everything in Unknown Artist\Unknown Album etc. Details here. Can you give me an idea of how things are set out? Maybe it needs a little tweak to cope with the way you've done things, or we could use something like MediaMonkey to reorganize what you have into something the script can work with.
I'm going to be out for much of the day but I'll look in on this thread later.
tt2

How to connect a MBP to a BENQ external monitor using a HDMI cable and a HDMI to mini display adapter?

Hi, I have just bought a brand new HDMI cable and HDMI to minidisplay adapter and tried to connect my Macbook Pro up. The external display knows it is there but it is not getting any signal. I have tried on another TV and it also says no signal and I also tried using another Mac but it still didn't work.
Can anyone help?

In some versions of Mac OS X, with the Displays pane open, holding the Option key will show the detect displays button in the lower right.
I am using OS X Mavericks. Where did the Detect Displays button go?
You can find the Detect Displays button in the Displays section of System Preferences. Once there, press and hold the Option key to see the Detect Displays button in the lower-right corner. You can click this button to manually detect another display.
Another technique is to sleep and wake your computer, which will send the detect display sequence as well.

Netflix tells me to turn off AirPlay mirroring but no AirPlay symbol on control center. I'm only connected to a hdmi cable and VGA adapter. It's on an iPad mini.

No airplay signal shows up and I'm not connected to anything else other than the VGA cable and that one connected to the hdmi cable.

http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
http://support.apple.com/kb/TS4215
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-Airplay-Icon-Missing. htm
 Cheers, Tom

Mac is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable?

Macbook Pro is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable. 2010 Macbook Pro, just purchased Mini DisplayPort to HDMI Adapter Cable from Amazon. Link here: http://www.amazon.com/Mini_Dis-HDMI-CB6-Mini-DisplayPort-Adapter-Cable/dp/B003OC 6LWM/ref=sr_1_2?ie=UTF8&qid=1406238976&sr=8-2&keywords=mac+to+tv --When i connect both ends of the cable to the TV and to the laptop, the screen will blink, but then afterwards it will not mirror on the TV. I have tried going to display setting but cannot find the arrangements tab. When i searched "arrangements" a message said, "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer." Not sure how to fix this problem. I have connected this laptop to a TV before, but with a different cable other than the one i just purchased. Any help would be greatly appreciated, thanks.

Found the fix. Still don't know if it was Windows, iTunes, or Norton 360, but this worked immediately for me:
+++++++++++++++++
edgravel
Re: iTunes Store Won't Load, Won't Show Error Message
Aug 13, 2011 4:32 PM (in response to Daedalme)
I found a solution posted from Rodfromnework for PC users. It worked for me and easy to do.
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in:
Netsh winsock reset
Hit enter, restart PC, open iTunes, go to Store
Hope it works for you too.

Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. scree

Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank you

Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
thanks
larry

I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
Use what you have for a system backup or for secondary backup storage.
you might be able to take the drive - most cases allow you to open and swap drives - and use this:
G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive
or this:
http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

New 13" Macbook Pro trying to connect to a Panasonic VIERA TC-L42U30 as second monitor. I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. The Macbook does not sense the second monitor (TV). Help?!

I've been a Mac since 2008, so I know my way around the system pretty well. This issue, however, has me stumped. I had an iMac until now and only now am I experiencing some difficulty with my new MacBook Pro. The model I have is the newest 13" Macbook Pro model and I'm trying to connect a Panasonic VIERA TC-L42U30 42" HDTV as a second monitor via the Thunderbolt port.
It worked the first two times and hasn't worked since, after 10-15 attempts with different configurations, turning things on n off, restarting the mac, unplugging the cables, adapters, TV, resetting the P RAM, etc... I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. No matter what I do, the Macbook does not sense the TV as a second monitor anymore.
I took the MacBook Pro to the Apple Store, and their "genius" there had it working fine with a DVI connection to a regular monitor. The Panasonic TV I have has HDMI connections and one VGA connection which does not support HD, but no DVI option. I want an HD connection to mirror or extend my MacBook Pro screen. At the Apple Store, they didn't have a Thunderbolt/Mini DisplayPort to HDMI adapter, so he could not try that out for me.
Anyone else have this configuration or another similar one with a Panasonic HDTV?
Ideas? Suggestions? Anything?! Help!!
P.S. I'm running Mountain Lion, if that wasn't already obvious. Everything is up to date in my App Store as well.
Thanks!

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

External monitor loses signal to macbook pro through DVI cable and Mini DisplayPort Adapter

Hello,
So I had my external monitor connected to my MBP with a DVI cable and a Mini DisplayPort Adapter, for a while already. But sometimes, the monitor would lose signal from the laptop and gives me a white noise screen. Now, the monitor can't receive signal at all, even after I got a new Mini Displayport Adapter. When the monitor and the MBP is connected by the cable and the adapter, the monitor would say "no signal" and the MBP screen would flicker (I think it's trying to connect to the monitor, but can't). The new Mini Display Port Adapter also makes the screen flicker, so I'm not sure if it's the problem is at the adapter or the DVI cable. I'm pretty sure it's not the monitor.
What do you think? Have you ever have a screen flickering problem when your MBP is connected to an external monitor?

I have had the same problem. By following your suggestions I got to arrangements. I could not send them off to the side. When I hit the mirro disply key everyting worked. I got it solved by clicking in arrangements and setting displays to mirror display.
I am still have a problem of no sound coming through my tv.
Rolland

Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable

Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable (Mini Display to Thunderbolt Adapter)

Sorry but no you can't.
Only Macs with ThunderBolt ports can be used with the ThunderBolt Display and the 2009 Mac Mini doesn't have a ThunderBolt port.
Which computers can I use with my Thunderbolt display?
Stefan

Connectivity adapter cable and pc suite

Similar Messages

Maybe you are looking for