Connectivity between SAP BW on HANA to ECC & BO
Dear Experts,
Kindly help me for below requirement for SAP BW 7.4 on HANA implementation.
ECC Side:
1. BW 7.4 SP05 or SP07 required patch level for ECC system (SP and EHP level)?
2. What are the Configuration needs to be activated to support extraction?
3. Any other important & technical step to be activated or required?
4. Pre-req for connectivity
5. Is there any CTC wizard for Connectivity to ECC (Source system)?
SAP BW on HANA 7.4
What are the pre-req/services/configuration steps on SAP BW 7.4 on HANA side to established for BO & ECC connectivity?
SAP BO 4.0
1. What are the steps required on BO side to established connectivity?
2. What is 4.0 SP level require?
Thanks in Advance.
Regards,
Sri
Hi Mahish,
I see this post is from March. I understand you have got some solution to it already.
If yes, could you please share the solution.
Thanks and regards,
Aaloka
Similar Messages
-
Connectivity between SAP ECC system and SAP BI
Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan -
Setting up a https connection between SAP CRM and genesys gplus adapter
Hello All-
We are integrating SAP CRM with genesys mysap gplus adapter. We are struck in setting up a https connection between sap and gplus adapter.
Can anyone here help me out in this like how to get the SSL Protocol, keystore, keystore password,truststore and truststore password.
Information abt Adapters server certificate. Do we need to configure the adapter for the proxy also?
Any additional comment will help. Thanks in advance!Hello Vinod,
Please refer the following OSS notes 564085.
Please reward if helpful.
regards,
Muralidhar Prasad.C -
Connection between SAP R/3 and SAP XI with RFC
Hi Experts,
I am beginner in SAP XI.
We are using SAP XI 3.0 SP 9 and SAP R/3 4.6 C
I am trying to validate a connection between SAP R/3 and SAP XI with RFC.
I followed all the weblogs ,and i did exactly the same way, but I am unsucessful...
Schema not available Exception
com.sap.aii.af.service.cpa.CPAException: Schema not available for RFC|3b787a8035c111d6bbe0efe50a1145a5|http://sap.com/xi/XI/System.
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.endElement(DirectoryDataSAXHandler.java:262)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1826)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1722)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2298)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1719)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2701)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataParser.updateCentralCache(DirectoryDataParser.java:54)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.updateCacheWithDirectoryData(CacheManager.java:713)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:595)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:440)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Please help me out on this
Thanks in advance
Rajuhi,
try refreshing you CAP cache:
741214 (check this note)
and check if the refresh was successful
(CPA history)
Regards,
michal -
How to give connection between sap R/3 to sap BI 7.0 system
how to give connection between sap R/3 to sap BI 7.0 system
Hello,
Check this links:
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
You can look at:
OSS Note 184971 'Notes on BW source system connections' and http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/content.htm
You can use this best practice connectivity guide for connecting BW to any SAP source system . It explains step by step procedure to connect the source systems to BW.
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
check this:
http://wiki.ittoolbox.com//index.php/HOWTO%3ARe%2DConnect%5FR/3%5Fand%5FBW#Type_Transaction_SM59._Maintain_RFC_destinations
Regards,
Jorge Diogo -
Connection Between SAP GTS and Legacy systems
Hi GTS Experts,
Could you please let me know how to connect between SAP GTS and Legacy systems.
This is for transfer of Customers, Vendors,Materials(Products in GTS),Transaction Data.
Could you please provide any documentation on this and is it PI team will do or functional guy.
One more question:
Customer created a sales order with sold to and ship to(both contains same address) in legacy system.
Then it will be sent to SPL screening in GTS.
Now he will change ship to address and this should not be passed to SPL screening-- how to do this.
Regards,
MuraliHi Murali,
Apart from what Dave mentioned as above, although there is no such document available apart from SAP Standard content document but its something that is very standard to other modules as well.
Actually, you need to have a middle ware like SAP PI or any non SAP Product between SAP and Non SAP Legacy system. Also, mapping should be defined well in advance in this. Then it will also involve the EDI at the SAP GTS system end and Web skills( or applicale connection skills) at the Legacy system end to ensure appropriate mapping and interchange of realistic data.
Here, I would like to know if your legacy system had already some SAP system connected to it?.
Regards,
Aman -
Functional transactional difference between SAP version 4.7 and ECC 6.0
Hi Experts,
Can you Pls tell the Functional transactional difference between SAP version 4.7 and ECC 6.0 in case of Sales and Distribution module.
Like VA05n is one transactional difference,Pls tell the others?
Regards,
RohanHi,
there are lot of changes like i observe
1, in rebates there is no advanced rebate processing in 4.7
2. there is no scale group field in condrecords of agrement in rebate agreement.
3. there are lot of new reports available in SIS
4. in sales returns process also seperate config available in 6.0
regards,
sk -
Difference between SAP version 4.7EE and ECC 6.0.
Hi All,
Could you please tell me the major difference between SAP version 4.7EE and ECC 6.0? Also let me know why the industries should go for ECC 6.0?
Waiting for an early response from you.
Thanks a lot in advance!http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Please use above mentioned link, you will find the delta functionalities between various SAP Versions.
Regards,
Ravi -
Establishing a connection between SAP SRM and MM
Dear All,
I am working for a multi-national company and now we are thinking to implement SAP SRM but I have some questions about communication between SAP MM and SRM. Firstly I want so share with you our as-is status and then my doubts and question that I have.
In our case we have two different locationed organizations which are using different version of SAP system and SAP MM. In this two sap system mostly codes are and descriptions are different for all materials and now we want gather all data and we want to have one global code system and (local code also will remain). I mean we want to call same materials with one global unique code instead of two different codes. We are thinking to implement something like coding center that will take local master data from local organization then will assign global code, update table then with somehow will update SAP SRM.
For example:
We have local master data on R/3 is maintained manually by local user and net item is created locally each country by local user.Coding center will be aware of new creation by mail, automatically. Coding center will update table (adding a new row for each new item) on translator (tool for assigning global code for materials) assign to each new item a global code and category and in this way SRM will be updated automatically based on translator.
I am thinking to develeop a tool (excel,access etc.) that will take new item creation manually or auto from local organization then will assign a global code and category then will update SAP SRM automatically
Regarding to tool I have some questions:
1) which are the standard communication channel between R/3 and SRM or How they can speak with each other ?
2) Is there any standart batch file (BI or BAPI) to be able to perform this.Is it possible to develop tool using excel or access etc. which will manage coding task.
3) When we are trasferring for the first time Master Data from MM to SRM is there any standard transaction?
4) how the two MD are aligned (i.e. what if a new item is created or modified on MM)?
5) standard program (transaction) for aligning available ?
6) ) how this process can be triggered (scheduled using SAP scheduler, event or user driven)
7) Where the translator (tool) should be (R/3 local, SRM, BW, other) --> Enrichment table
8) How we can build the communication transaction?
Thank you very much
Any comments and answers will appreciated and rewarded
Regards,Hi,
Have you considered using CCM. You generally use an industry standard code (perhaps UNSPSC) in CCM as your vendors would all have different number (similar to your scenario). CCM is a plug-in to SRM, supplied by SAP.
The authoring tool is where you can enrich your catalogue, and have approval dependant on rules that you setup. In your case you would possibly have a catalogue per locationed organisation (or R/3 system). These would then be mapped to a master catalogue, and assigned to users as views. This tool is a BSP on SRM. You could also upload these catalogues from Excel (as a CSV) or through XI as XML. We use the automatic transfer of materials from R3 and then there is a report in SRM to feed that through to the catalogue.
The only thing that needs to be thought through is how you feed the selected catalogue item back to the differing R3 systems, but this shouldn't be a stumbling point.
Cheers
Rob -
Step by step procedure to establish connect between SAP APO and SAP PI
hello All,
Can any one provide me link or step by step procedure to establish or exchange messages between SAP APO and SAP PI.
Thanks
RajeevHi,
>>>Can any one provide me link or step by step procedure to establish or exchange messages between SAP APO and SAP PI
sure
a) if you want to use idocs
http://www.sappress.com/product_basic.cfm?account=&product=H3059
b) if you want to use ABAP proxies
check out blogs on sdn on ABAP proxies
only those two are used
Regards,
Michal Krawczyk -
Connectivity between SAP and SQL Server
Hi all,
how to take the SAP data which is in Oracle database on AIX Operating system to SQL Server database which resides in Windows for a portal?
Can anyone help on this?
Regards,
SathyaHEllo,
Hi
Please see the following:
1. Create an entry in Trxn DBCA for SQL Server in SAP, you are creating a database connection for the SQL server in SAP.
2. You use this connection, and write Native SQL stmnts...between EXECSQL...ENDEXEC to fetch the data..and then normal ABAP statements to put that data into your ztable.
TABLE DBCON Entry can be like this...depends on your External database..
CON_NAME Raj Logical name for connection
DBMS MSS Microsoft SQL Server
USER_NAME <User name> For SQL Server
PASSWORD <password> " "
CON_ENV MSSQL_SERVER=<server> MSSQL_DBNAME=<database name>
DB_RECO Availability type for an open database connect
FUNCTION z_houston_connect.
*"*"Local interface:
EXEC SQL.
CONNECT TO 'RAJ' AS 'V'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'V'
ENDEXEC.
*- Get the data from MS-SQL Server
EXEC SQL.
open C1 for
select
l.loc_id,
l.loc_name,
a.acc_id,
a.acc_name,
d.person
from ho_loc_mast as l
inner join snd_acc_mast as a on l.loc_id = a.loc_id
inner join snd_acc_addr as d on a.loc_id = d.loc_id and
a.acc_id = d.acc_id
where l.loc_id = '001'
ENDEXEC.
DO.
EXEC SQL.
FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_acc_id, :wa-c_acc_name, :wa-c_person
ENDEXEC.
IF sy-subrc = 0.
PERFORM loop_output.
ELSE.
EXIT.
ENDIF.
ENDDO.
EXEC SQL.
CLOSE C1
ENDEXEC.
ENDFUNCTION.
Regards,
Vasanth -
How to create a connection between SAP BPC 10.0 to SAP BOBJ
Hi friends,
My client want see the reports in BOBJ which are built in SAP BPC. How to create the conncetion between BPC and BOBJ.
1.Is there any guide to create such connection ?
2.how the data feed to BOBJ reports?
please help me ASAP.
Regards,
Saida Reddy GHi,
Check http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8034121d-8419-2e10-229a-99ec678b64c5?QuickLink=index&…
How to Use the EPM Connector to Visualize BPC Data via Dashboard Design (aka Xcelsius) | planingandconsolidation
Hope it helps...
regards,
Raju -
How to find the difference in BI Content between SAP ERP 4.7 and ECC 6.0
We are looking at upgrading our SAP system from 4.71 to ECC 6.0, and I have been tasked with determining what new data may become available in our BW system after the upgrade. I was wondering if there was a site that would tell me what new datasources/infoproviders are made available after an upgrade to ECC 6.0.
I do not need to see the list of all Business Content in ECC 6.0, just what has changed.
Also, the type of upgrade we are looking at performing is a "Technical Upgrade", which presumably just upgrades the SAP back end without affecting the front end. Can someone confirm that the new BW content will then be available after a technical upgrade?
Thanks
Michael
PS - our BW system has been on version 2004s for two years now.
Edited by: Michael Frank on Feb 3, 2010 3:07 PMHi,
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
-Vikram -
Connection between SAP and Documentum
Hi All,
We are retrieving some files from Documentum from an ABAP report in SAP using HTTP connection (using Web services). We were successful connections in DEV and QA.
Now in production, this server is load balacing on 3 servers. Their Prod Server is actually a content switch which redirects to one of the three servers. SAP is able to access all their three servers separately. However when I use the same code to access the Documentum content switch, it fails. We get a HTTP 404 - Not found error -
Here is the excerpt of code where this error is coming up-
CALL METHOD w_http_client->response->get_status
IMPORTING
code = lv_http_code
reason = lv_status_text.
This is pretty much my code I used which worked for Dev/ QA/ Prod individual servers (the content swtich doesnt work!)
CALL METHOD cl_http_client=>create_by_url
EXPORTING
url = w_string
proxy_host = hostname
proxy_service = port
IMPORTING
client = w_http_client
EXCEPTIONS
argument_not_found = 1
plugin_not_active = 2
internal_error = 3
OTHERS = 4.
CALL METHOD w_http_client->authenticate
EXPORTING
"PROXY_AUTHENTICATION = 'X'
username = lv_username
password = lv_password.
CALL METHOD w_http_client->send
EXCEPTIONS
http_communication_failure = 1
http_invalid_state = 2.
CALL METHOD w_http_client->receive
EXCEPTIONS
http_communication_failure = 1
http_invalid_state = 2
http_processing_failed = 3.
DATA: status_text TYPE string, http_code type i.
CALL METHOD w_http_client->response->get_status
IMPORTING
code = http_code
reason = status_text.
The Documentum Prod server (content switch) is supposed to be transparent and thus SAP should be able to connect. But this does not happen. Any ideas if any other config is required for SAP to connect to a content switch?
Pls advise.
Thanks in advance! LizHi All,
Appreciate your suggestions in my problem above. Any ideas anyone?
Thanks! Liz -
Connection between SAP / BW and OSIsoft PI
Hello,
I need to configure a new source system in SAP / BW, is the connection type will be UD Connect, the system will be connected to the OSIsoft PI.
Someone who has made this connection, can you help me?
Tkz
BrunoHello,
we have 2 possiblities in BW to get data into BW.
1) pull
2) push
I understodd that you want to push data to BW. Please have a look into the Howto paper: https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to send xml data to bw
and
https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to integrate bw to xi.pdf
If you want to connect an external system to BW and extract data to BW and the BW system is the leading system.
You need a RFC server, or UD connect (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/943de6c3-0401-0010-b7a4-8b1af193f642) or you can use db connect or you can extract flat files.
All of these possibilies are decribed in the online help and in howto papers.
hope this helps
Michael
Maybe you are looking for
-
Substitution for Interest Block, posting through FB75
Hi, I have written a substitution according to which FI postings made through FB75 (Customer Credit Memo) must get an Interest block indicator. This means FI documents posted through FB75 must be excluded from Interest calculation while running Inter
-
I keep getting this message when trying to open documents from the web: "Adobe Acrobat is blocked" - Where to I accept the end user agreement which will enable me to access Pdf documents on the web? The Adobe website recommends this: (did not solve
-
Imported rolls from CDs show up out of order in Library!
I import my photos that I take on film and have had scanned to CDs. I just imported new rolls from CDs and they show up in my Library several rolls earlier from the ones that I imported yesterday. I had issues then w/ rolls being out of order as well
-
Finding commits in plsql during runtime
Hi, In any application, we will have many commit statements issued in many places. How can we find out as to where all commits have happened during runtime. Basically in our application, when am trying an operation, am getting the error ORA-01086: sa
-
Add Columns to Updatable Report
Hello, i need some help regarding an "Updatable Report". My goal is to have some SelectLists in comluns named "2008_05", "2008_08", ....."2010_01", "2010_04". The user must have the option to add more cloumns. My process on submit is: declare SQL_S