Connectivity between UCS 6249 - UCS 6248 Switches and 10GB iscsi on EMC Storage - VNXe 3200

Hi
I am trying to check VNXe 3200 Connectivity with SFP+ ( Cisco UCS 6249 - UCS 6248 Switches )
will the 10 GB iscsi fiber / Copper connect directly to the UCS 6248 and what is the type of Cables ?
will SFP and SFP+ connect to each other or that will cause some issues?
i tried to search the EMC side but getting difficulty to get the Document showing the Comparability but expecting soon so wanted to check from Cisco side
I know this is the Guide to refer to
http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-6200-series-fabric-interconnects/data_sheet_c78-675245.pdf
but please help me finding answers
Thanks

Hi Sami
https://community.emc.com/message/841141#841141
has the answer
EMC does not support Passive Twinaxial cables in an iSCSI or FCOE environment.
EMC only supports Active Twinaxial cables in an iSCSI or FCOE environment.
We currently support EMC, Brocade and Cisco cables.
SFP-H10GB-ACU7M and SFP-H10GB-ACU10M are active twinax cables
see http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/10GE_Tx_Matrix.html
https://community.emc.com/message/837419 might also be useful.
Walter.

Similar Messages

Monitoring traffic between UCS fabric extenders and fabric interconnect?

What is the best way to monitor the traffic between UCS fabric extenders (chassis) and fabric interconnect? Specifically I am looking for parameters to keep an eye on to determine when we may need to move from 2 links per fabric extender to 4 to handle greater IO needs.
Thanks.
- Klaus

One way you could monitor usage is by looking at the interface stats just as you would for any switch uplink.
Connect to the Cluster CLI
connect NXOS
Look at the input/output rate of your Server Uplink interfaces.
In my example I'm using fixed ports 1 through 4 on my FI's connecting to the IOM of the Chassis.
UCS-A(nxos)# show int eth1/1-4 | include rate
30 seconds input rate 17114328 bits/sec, 1089 packets/sec
30 seconds output rate 8777736 bits/sec, 693 packets/sec
    input rate 5.07 Mbps, 198 pps; output rate 1.03 Mbps, 99 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 1584 bits/sec, 2 packets/sec
    input rate 1.58 Kbps, 0 pps; output rate 1.58 Kbps, 3 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 31680 bits/sec, 20 packets/sec
    input rate 1.58 Kbps, 0 pps; output rate 30.89 Kbps, 18 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 1584 bits/sec, 1 packets/sec
    input rate 1.58 Kbps, 0 pps; output rate 1.58 Kbps, 3 pps
If you notice your two links pushing near 10G consistently, it might be time to add another 2 link.
Other than this you can use SNMP to log the stats and look based on daily/weekly/monthly usage.
Robert

The connection between a Westell 6100 DSL modem and my new Apple Extreme is not stable.

My new airport extreme and a Westell 6100 DSL modem are connecting, but the wifi is now slow and unstable. How do I configure the modem and Airport Extreme so that they function together better?

The resason that the password shows long key length after clicking save settings is just for security purpose so that password can not be rechecked .....so you don't have to worry about the lenght of your DSL password ....it is correct even after saving the settings.....
Now as you said that Modem is already under bridge ..... & you are trying to use PPPOE settings on router .... in that case you should get Internet Ip address under status tab of router after clicking connect .....as you are getting the error message "cannot get an Ip from PPPOE server" ..... i assume that Modem is not configured under 100% Bridge Mode.....
Check once again with your Internet service provider if the modem is in Bridge mode or not....

Dell Powerconnect 6248 1gb and 10gb "redundant" Links

Hello,I have two powerconnect 6248 switches on separate floors that are currently linked with a 1gb fiber. This environment was setup prior to me joining this team.We have noticed that we are saturating the 1gb line and need to go to a 10gb link. The building is already cabled with a 10gb aqua fiber bundle that runs about 220 meters, and we have purchased the appropriate sfp+ modules and fiber patch cables.We need to make this switch with little to no downtime and the proposed solution by the prior sysadmin was to connect the 10gb link and leave the 1gb link as failover.To give a little background on the switch environment, there are 4 vlans including the default vlan 1 and all vlans are tagged on the ports for the 1gb link. STP is enabled on both switches.So I disabled the sfp+ ports, plugged the fiber cables in, and set the ports to...
This topic first appeared in the Spiceworks Community

Hi Ross,
The only rack servers which we support to be connected to the UCS FI are the C series servers. One of the reasons being they running the CIMC which the UCSM uses to manage and configure the rack server (almost like the way we do with our blades).
./Abhinav

Can I configure FCoE between UCS Fiber Interconnect and Nexus 5k?

Hello,
I have 2 UCS with 2 pair of Fiber interconnect 6120XP and they are conencted to Nexus 5k. Currently 10Gig Ethernet and FC are used for connectvity. I have 8 port FC module in Nexus 5k. Storage is connected to Nexus 5k over FC. I would like to change the FI to Nexus 5K connectvity and configurtation with FCoE so that I can get few more free FC ports for stoarge connecting. Could you please help me whether it is possible with Nexus OS version 5 and how do we do this?
Thanks.

What storage are you using and is it capable of running a CNA?
If so, one configuration I have used to reduce ports out of the storage and reduce the need for a high density of FC ports is to run FCoE from Storage to 5k, then trad FC from 5k to FI.
With the 5k acting as a bridge between FCoE and FC you don't hit the single-hop limitations that currently exist within the protocol.
Sent from Cisco Technical Support iPhone App

What is the difference between UCS-SD-16G and UCS-SD-16G= ?

Hi,
I have some Cisco B200 m3 blades and will be installing some 16GB SD cards in them. The documentation says that I need UCS-SD-16G cards, but I received cards that say UCS-SD-16G= . Does anyone know what, if any, difference the '=' makes? Are they the same card? I have to make a large purchase of these cards and want to make sure these are the correct type before ordering. Thanks

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
I believe the "=" suffix indicates "spare" part.

Connection between 2 routers across a Switch

I have a link on for example VLAN 211 and I need devices on VLAN 1 to get access through.
How can I do this.
The Link line is on VLAN 211 but the switches can only be on VLAN 1 as they are just actng as hubs and VALN 211 cannot be created on them.
Thank for your help

Hi Friend,
I am sorry for my last information.
Console> show trunk
* - indicates vtp domain mismatch
So if you see * in sh trunk command in your cat6k switch that means there is a VTP domain name mismatch between the trunks.
Now you have configured trunk between cat6k and 3550 switch so you can check the vtp domain names and if you want you can have a common domain name but as a matter of fact it will not have any problem even if you have a domain mismatch cause you are not using VTP in your network and you only have 2 vlans (vlan 1 and vlan 211) so you should no be concerned about VTP domain mismatch.
Incase if you want to see the VTP domain names on both the switch (cat6k and 3550) use this command
For cat6k
show vtp domain
For 3550
show vtp
HTH, if yes please rate all helpfull post.
Ankur

Cannot connect between a Mac Pro (late 2013) and a MBP and vice versa

Cannot connect to Macbook Pro from Mac Pro late 2013. I have tried via ethernet and wifi. I can screen share either way. I have tried to connect to other MBP's on the same network with no luck. I try and connect as a registered user, as I usually do, with no luck. When I enter the Username and then Password the box vibrates as if the details are incorrect, they are definitely correct however.
I have no firewall on. Both devices are using the most recent OS.
Thanks in advance
Jeff

Hi Grant, Here is the Console system log. Tried to connect to Macbook Pro at 15:46:30
Mar 22 15:44:28 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.preference.datetime.remoteservice[744]): Service exited due to signal: Killed: 9
Mar 22 15:44:38 Jeffs-Mac-Pro kernel[0]: hfs: mounted Time Machine Backups on device disk2s2
Mar 22 15:44:40 Jeffs-Mac-Pro com.apple.backupd[736]: Disk image /Volumes/Data/Jeff’s Mac Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Mar 22 15:44:40 Jeffs-Mac-Pro mds[35]: (Volume.Error:880) Root store set to FSOnly with matching create! (loaded:1)
Mar 22 15:44:41 Jeffs-Mac-Pro com.apple.backupd[736]: Backing up to /dev/disk2s2: /Volumes/Time Machine Backups/Backups.backupdb
Mar 22 15:45:27 Jeffs-Mac-Pro com.apple.backupd[736]: Will copy (72.8 MB) from Jeff Mac Pro HD
Mar 22 15:45:27 Jeffs-Mac-Pro com.apple.backupd[736]: Found 973 files (72.8 MB) needing backup
Mar 22 15:45:27 Jeffs-Mac-Pro com.apple.backupd[736]: 1.56 GB required (including padding), 232.28 GB available
Mar 22 15:45:48 Jeffs-Mac-Pro NetAuthSysAgent[773]: NAHSelectionAcquireCredential complete: iakerb A88A5E19-89A1-8FEF-EE42-8F065FC94669 - ***@mac.com: GSSCred: 0x7ffa296262f0 <MC: iakerb com.apple.idms.appleid.prd.4f7466316e4d737570647351515953457261382b32773d3d@WEL LKNOWN:COM.APPLE.LKDC>
Mar 22 15:46:41 Jeffs-Mac-Pro NetAuthSysAgent[773]: NAHSelectionAcquireCredential complete: iakerb A88A5E19-89A1-8FEF-EE42-8F065FC94669 - ***@mac.com: GSSCred: 0x7ffa29432780 <MC: iakerb com.apple.idms.appleid.prd.4f7466316e4d737570647351515953457261382b32773d3d@WEL LKNOWN:COM.APPLE.LKDC>
Mar 22 15:47:04 Jeffs-Mac-Pro Console[781]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
Mar 22 15:47:17 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.PubSub.Agent[784]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.pubsub.ipc
Mar 22 15:47:17 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.PubSub.Agent[784]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.pubsub.notification
Mar 22 15:47:36 Jeffs-Mac-Pro com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Mar 22 15:47:56 Jeffs-Mac-Pro Dock[286]: void CGSShmemReleaseMappedMemory(CGSShmemID): failed to find shmem ID 787.

Rtmfp connection between content running on flash player and air for mobile

HI, I've been developing an app for some time that makes use of a secondary application as a remote controller.
Until AIR3.5 this worked smoothly through RTMFP: the original app (the "player") started listening at both local network ("rtmfp:") and with the aid of the Cirrus service ("rtmfp://p2p.rtmfp.net/mycirruskey"). The controller app (the "remote") first try to establish a connection on the local network and, if it does not succeed, try to locate the player using Cirrus (usually when it was run from a device connected on a 3G network).
This approach was surprisingly effective (I guess rtmfp and the cirrus service are indeed very nice), but now I'm updating my apps using AIR3.7 and the problems began - and I didn't change a single line from the original code... First, I am unable to connect the mobile app to the flash player using local rtmfp, the netgroup just doesn't get any neighbor. Second, even with the aid of Cirrus, I can only establish the connection if the player and the remote are connected on different networks (like one on my wifi connection and the other on 3G). If I put both, the computer running the player and the mobile running the remote on the same wifi, the connection is never completed.
To make the problem even stranger, if I save the player as an AIR application, for mobile or desktop, the cirrus connection does work perfeclty, so it seems that the problem is related to connections to the flash player itself.
Is this an expected baheviour of AIR3.7 for some sort of security issue (limiting flash player/air apps connection)? If not, is there a way to solve it?
Thank you!

Added one yesterday:
https://bugbase.adobe.com/index.cfm?event=bug&id=3560258
Interestingly air 3.7 on IOS to Desktop air 3.7 will work.
I am investigating if I can use 3.7 on Android to connect to 3.7 on iOS - so far I cannot get the apk to install on my Galaxy S3, compile using 3.4 and all is good. Air runtime has been updated via Play store - and build uses compiled runtime.
I cannot get Flash player 11.4 to connect with air 3.7 on iOS either.
NetGroup.Neighbour.Connect never fires.
All SDKS above 3.4 upto 3.8 beta exhibit the same problem.
3.4 works perfectly and can connect to flash player, and other Air/iOS devices just fine.
Shuld not be a issue with firewalls etc, thay are all open.
I can email you the fla, it is for a product so I can't post it here.
Thanks,
Steve.

Connection between Structure Field and Table Field

Hello everybody,
I'm trying to find a connection between a field in the structure and the actual filed in the table of the database. For example in the structure CAUFVD you have the field PLNNR. This information is stored in the table AFFL in the field PLNNR.
In the transaction SE84 you can display a structure with all it's fields but I don't see anywhere from which table and field the information is gathered.
Can you please help me in finding the connection between the structure field and the table field in the database in which the displayed information is stored?
Thanks and best regards,
CALIN Marius-Bogdan
SAP - PP-KeyUser

Double-click on the structure field and you can do a where-used to find the codepoints, interface usage, etc. You might find it that way. You could also look at the flow logic of your screen and try to trace it back. Otherwise, you'd have to use watchpoints, the debugger, runtime analysis or various other developer tools to find the data population. If you are a user and not a developer as your signature indicates, you might need to find a developer for this. Sometimes, it can be incredibly frustrating with SAP because the data field will be handed off 4 or 5 times before it actually reaches its destination field. Unfortunately, I haven't worked with PP in at least 10 years so I can't give you a better answer; maybe someone else can.

How to make the connection between a sale order and an invoice in SDK

Hi,
Im trying to make the connection between a sales order and an invoice using the SDK.
Here is how i create each of them:
Invoice:
public int SalesInvoiceInternalSave(string buisnesspartnerCardCode, DateTime dueDate, double discountPercent, string id, IList<InternalItem> items, ref int invoiceId)
      int res = 0;
      SAPbobsCOM.Documents invoice_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
      invoice_entry.CardCode = buisnesspartnerCardCode;
      invoice_entry.DocDueDate = dueDate;
      invoice_entry.DiscountPercent = discountPercent;
      invoice_entry.Reference2 = id;
      foreach (InternalItem item in items)
        invoice_entry.Lines.WarehouseCode = item.Shopid;
        invoice_entry.Lines.ItemCode = item.Code;
        invoice_entry.Lines.ItemDescription = item.Name;
        invoice_entry.Lines.Quantity = item.Quantity;
        invoice_entry.Lines.UnitPrice = item.Price;
        invoice_entry.Lines.Add();
      res = invoice_entry.Add();
      return res;
Sales order:
    public Boolean SalesOrderInternalSave(string orderId, string buisnesspartnerCardCode, DateTime dueDate, IList<InternalItem> items)
      SAPbobsCOM.Documents order_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders);
      order_entry.CardCode = buisnesspartnerCardCode;
      order_entry.DocDueDate = dueDate;
      foreach (InternalItem item in items)
        order_entry.Lines.WarehouseCode = item.Shopid;
        order_entry.Lines.ItemCode = item.Code;
        order_entry.Lines.ItemDescription = item.Name;
        order_entry.Lines.Quantity = item.Quantity;
        order_entry.Lines.UnitPrice = item.Price;
        order_entry.Lines.Add();
      int res = order_entry.Add();
      return res == 0;
What do i need to change to get the connection between the two of them?
And how do you insert a amount (not percent) discount into an invoice?
Regards,
Torben

Hi,
Add the sale order, then add the invoice. and while adding the invoice please add the following details to the invoce documen
invoice_entry.Lines.BaseEntry = 'Doc entry of the newly created SO
invoice_entry.Lines.BaseLine = 'Line No of the SO
invoice_entry.Lines.BaseType = 17 'For sales order document type.
Hope it helps,
Vasu Natari.

No Ping-Answer in Site-To-Site-Connection between Cisco 876 and CheckPoint-Firewall

Hello!
We try to establish a Site-To-Site-IPSec-connection between a Cisco 876 (local site) and a CheckPoint-firewall (remote site). The Cisco 876 is not directly connected to the internet, but is behind a DSL-Router with port-forwarding, forwarding ports 500 and 4500. The running config of the Cisco 876 is appended to this discussion thread. Unfortunately I get no output when debugging the connection with commands "debug crypto isakmp" and "debug crypto ipsec".
From the Checkpoint-firewall point of view the connection seems to establish, but there is no ping answer.
The server on the local site that should be reached from the network behind the Checkpoint-firewall has a routing entry "route -P add [inside ip-net remote] 255.255.255.0 [inside ip local]" (see also appended running config for naming of ip-addresses).
Establishing a Cisco VPN-Client connection to the same Cisco 876 router works fine.
Any help would be very much appreciated!
Jakob J. Blaette

Hi Jakob,
Adding my two cents here.
You always need to confirm that the following ports and protocol are opened:
1- UDP port 500 --> ISAKMP
2- UDP port 4500 --> NAT-T
3- Protocol 50 ---> ESP
A LAN-to-LAN tunnel will never establish a session over TCP, but it could use NAT-T (if behind NAT). Remember that a one-to-one translation is not a port-forwarding, a LAN-to-LAN tunnel does not work well unless you have a one-to-one translation for the NATted device, which I think, in your case is the Router.
HTH.
Portu.
Please rate any helpful posts and mark this post as answered.

Establish connection between existing IAS6.5 and newly installed S1WS6.1

Does anybody know how I can establish connection between iPlanet app server 6.5 and Sun One web server 6.1? I have an existing IAS6.1 and I've just installed web server 6.1. Can this be handled by installing a web connector plug in?

Does anybody know how I can establish connection between iPlanet app server 6.5 and Sun One web server 6.1? I have an existing IAS6.1 and I've just installed web server 6.1. Can this be handled by installing a web connector plug in?

Connection between two Macs fails

My home-network consists of a MacPro (1,1 - 2006), a MacBook Pro (Early 2008) an a MacMini (late 2009), all running OS X 10.6.3, no software-firewall is running. My router is a LinkSys WRT 610 N which I use with ethernet (Mac Pro) and wireless (Book an Mini). Wireless is both, 2,4- and 5,0 Ghz (802.11n).
When I try to connect from the MacPro to the MacBook Pro via wireless, sometimes it works, sometimes it doesn't. The reverse connection works (Book to Pro). Sharing is enabled on every Mac, also screen sharing. If I connect the MacBook Pro via ethernetcable, it works. What could this be? Also I often cannot connect via the symbol in the sidebar of the finder, I have to use the "go to" - menu. If I want to make screen sharing I have to use "go to > vnc ...". Does anybody know these issues and can give me a hint? By the way, the connection between the two "younger" Macs (mini and book) works fine ...
Message was edited by: Stefan Gregor

Stefan Gregor wrote:
What could this be?
_*wireless interference*_ ?
download iStumbler (free) and note the channels other networks in your vicinity are broadcasting on. change the channel(s) of your network as far away as possible from those.
any improvement ?
JGG

How to get connectivity between Personal Oracle 8.0.0.3 & Developer 2000 (Any Version

Can anybody tell me how to get connectivity between Personal Oracle 8.0.3 and Developer 2000 Rel 2.1 in Win 98 Environment.
I am able to install either Oracle 8 or Developer 2000 but not both, even if I use different Oracle Homes.
When I posted the same question to www.xperts.com someone wrote to me saying that a patch has to be used to get the connectivity.
I have been trying to solve the problem for last 6 months, but could not do it.
Can you please tell me how to get the connectivity or atleast tell me which version will facilitate connectivity in a stand alone PC.
Thanks and regards,
Ashok
null

For Windows98. Worked for me, but no guarantee it will solve your problem.
1) Install Dev2K.
2) Install PO8i in a separate Oracle home.
3) Use the following for TNSNAMES.ORA in your DEV2K Home:
# C:\ORAWINKS\NETWORK\ADMIN\TNSNAMES.ORA Configuration File:C:\orawinKS\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle Net8 Assistant
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MYORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
null

Connectivity between UCS 6249 - UCS 6248 Switches and 10GB iscsi on EMC Storage - VNXe 3200

Similar Messages

Maybe you are looking for