Connectivity Issue After 1308 Update

I have a Nokia Lumia 920 bought in India. It's an unlocked phone. Right now I am using it in Sri Lanka as I have shifted here. Yesterday the firmware of my phone was updated to 1308.0001. Since then I am facing an issue with network connectivity. The network signals disappear intermittently or it keeps switching between 2g,3g or LTE. Also I am missing sms. I checked up regarding the issue and came to know that this issue is a direct result of 1308 update. Also I found that there is a new update i.e. 1314, which has been released to fix the issue. I have two questions to be answered.
1. When will 1314 update be available for my phone.
2. If it is not likely to come by in the near future, can I revert to earlier version or any other solution.
PS: I have tried the usual stuff of rebooting, taking out the sim and again rebooting etc. I am using a Dialogue connection.

hi mate,
have you checked that you are fully up to date with all the latest Nokia system app updates from the Store. try performing a soft reset (pressing the volume down and power buttons together until the phone vibrates), or if that doesn't work, a hard reset (Settings > About > Reset your phone) may be needed. please bear in mind that hard reset wipes everything, so please make a backup of all personal data to PC and/or online storage first.
failing that, you will need to take your phone to Nokia Care for inspection: http://nokia.com/support

Similar Messages

Is there a fix for the wifi connectivity issue after ios6 update?

Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Is there any fix for the bluetooth connectivity issue after most recent OS update?

Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?

There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

Bluetooth connection issues after update

Is anyone experiencing bluetooth connection issues after upgrading to iOS 8.1.3? I upgraded to iOS 8.1.3 and now it won't connect to my car bluetooth and my bluetooth speaker will sound like it has static from time to time.

Hi, joshzik.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing issues with various Bluetooth devices and your iPhone. Sometimes pairing the devices again can resolve the issue. However, here are a couple articles that have some helpful troubleshooting steps regarding Bluetooth connectivity and an iOS device.
Get help using your iPhone, iPad, or iPod touch with your car stereo
http://support.apple.com/en-us/HT203412
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
-Jason H.

Date format Issue after HRSP Update

Hi,
We are faced with a strange issue after HRSP update was applied on our client system (upgraded from SAP-KE-30 to SAP-KE-36).
There is an outgoing interface which picks up all the the starters into the local government pension scheme and updates a B2A document. This is implemented via a z-program.
When we look at the out put after the interface has run for the vast majority of employees it shows their date of birth as 21.05.1968 when it should show it as 21051968. This only appears to have happen after the HRSP's have been applied.
No modifications have been made to the z-program. What could be the reason for this issue. has anyone faced such an issue post HRSP update?
Any pointers on how to further investigate and resolve the issue will be most helpful.
Regards

Hello Iside,
In this case we can try to reload the software on the BlackBerry Smartphone to make sure it is running the latest version and there are no issues with the OS on the device.
To do this we would need to back up the BlackBerry Smartphone. Please open the BlackBerry Desktop Manager and connect your device. Click on the Backup and Restore options and select Back Up. Please note the location where the backup is being saved as we will need to access it later to restore the BlackBerry Smartphone.
Once you have backed up your BlackBerry Smartphone please follow the link below to complete a clean reload of the BlackBerry Smartphone software.
Link: http://www.blackberry.com/btsc/KB11320
Please test the date once the software is reloaded prior to restoring the backup.
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Exchange 2010 - Issues after rollup update installation.

Exchange 2010 - Issues after rollup update installation.
We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
An unexpected error occurred and your request couldn't be handled. and
Your network connection is unavailable. Please reconnect and try again.
Issue2 - When I open the Exchange Management Shell I get the following error:
Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
hope that it will be fixed after resolving issues 1 and 2.
We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
Please help.
Thanks.
Greg

Hi,
Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
"An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Doc to go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro

Doc To Go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro (15-inch Late 2011), Mac OS X (10.7.5), ipad iOS 6.0

Post in the iPad forum, this one is for OSX

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

Logic Remote connectivity issues after updating to iOS 8 (solved!)

Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
Navigate to the following directory on your desktop system running GarageBand:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
In the Preferences folder should be a file named "com.apple.garageband10.cs”.
Make sure GarageBand is not running and delete the "com.apple.garageband10.cs” file.
Relaunch GarageBand and see if you should now be able to connect.
The same can be done for Logic by navigating to:
~/Library/Preferences/
And deleting "com.apple.logic.pro.cs" and restarting Logic.
Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality) but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

Thanks very much! This solved my connection problem.

Bluetooth connectivity issues after updating to OS X 10.10.3

I have been experiencing issues with bluetooth mouse connectivity (apple magic mouse) after updating OS X to 10.10.3. My Macbook Retina 15" pro (early 2013) keeps losing connection with the mouse. Switching the mouse on/off helps in re- establishing connection between the mouse and the laptop for a few seconds. I was under the impression that this update of Yosemite was intended to rectify bluetooth and wifi connectivity issues. Any suggestions/advice welcome.

Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.Bluetooth.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Connectivity issues after 8.1.1 update please help! :(

Hi all. Here's the situation.
I got my Iphone 6 on release day.
Not had one single problem with it.
On Monday however I do a general software update to IOS 8.1.1
Now ever since then I cannot keep a steady connection to both WIFI AND my roaming internet.
BOTH show as connected however load EXTREMELY slowly or not at all. No matter where I am.
I have done a soft reset.
Switching on and off.
And resetting Network Settings.
Done all these 3 or 4 times and they are not helping.
It is too coincidental to not be because of the software update.
Can someone please help me?

Still no help for you? I updated my iPhone 6 to 8.1.1 this past weekend and now have huge connectivity issues too. My home WiFi signal is 5 bars but runs very slow for example Facebook, the phone cannot update messages or photos. Try to connect for online banking, forget it. I have turned off WIFI and try using my Verizon signal which is 3 out if 5 bars, same problem. Don't understand why Apple cannot fix this apparent bug. Will call Apple Care in a few minutes and let you know what they say.

IPad 2 is having connectivity issues since I updated to 8.0.2

My IPad 2 had connectivity for about 6 hours after I downloaded 8.0.2 last Saturday. Sunday morning I was back to NO SERVICE in the upper left hand corner. Yesterday I went to the Apple Store and they showed me how to reset the cellular data, and again I had my 3G back for 6 hours. Last night and again today we were back to NO SERVICE. Again I went to the Apple Store and they explained that there were a few phone models that were having cellular connectivity issues, but not IPads. Well, that's bunk, since I see the complaints that are exactly like mine all over the web. The Apple Store wiped my IPad clean and told me that if this is a software issue this should fix the problem. If this is a hardware issue then I will need to buy a new IPad.
Apple needs to own up to the problems that it caused with our devices. AT LEAST, we should be able to take the updates off of our IPads and go back to 7.0.
<Edited by Host>

If you can’t use a Bluetooth accessory or car kit

Wireless issues after kernel update

Hi,
after I updated my kernel yesterday, I've been having some issues with my wireless. I'm on a dell inspiron 1545, using kde and I use the broadcom-wl driver form the AUR.
Anyways. After I did a system update yesterday, it would refuse to load the wl module. So I recompiled the driver and that was fine. But still my laptop refuses to use its wireless card. At first I just couldn't connect to any wireless, now the networkmanager just claims that my WLAN Interface is unavailable.
the output of iwconfig:
lo no wireless extensions.
eth0 IEEE 802.11bg ESSID:"" Nickname:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Bit Rate:54 Mb/s Tx-Power:off
Retry min limit:7 RTS thr:off Fragment thr:off
Power Managementmode:All packets received
Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
eth1 no wireless extensions.
but if I try to run 'iwlist eth0 scan' it states:
eth0 Failed to read scan data : Invalid argument
I'm not that experienced with wireless, so I did what https://wiki.archlinux.org/index.php/Broadcom_BCM43XX says and some other pages I found on google. 'iwconfig eth0 up' doesn't have any influence.
As I said, before the upgrade it worked fine and I also had configured it as it is described in the link above.
thanks for any inputs,
tobi

litemotiv: 'lspci | grep Network' :
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
.:B:. : I guess (and hope) that's the only relevant part (at the top and bottom):
at the bottom what's that "wl taints kernel"
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
input: PC Speaker as /devices/platform/pcspkr/input/input1
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
lib80211_crypt: registered algorithm 'TKIP'
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
sr 1:0:0:0: Attached scsi generic sg1 type 5
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
uhci_hcd: USB Universal Host Controller Interface driver
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: acpi_idle registered with cpuidle
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
ACPI: AC Adapter [AC] (off-line)
Monitor-Mwait will be used to enter C-1 state
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
wmi: Mapper loaded
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
wl: module license 'Mixed/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wl 0000:0c:00.0: setting latency timer to 64
usb 1-5: new high speed USB device using ehci_hcd and address 2
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
eth0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
thermal LNXTHERM:00: registered as thermal_zone0
and maybe
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
start_kdeinit (3367): /proc/3367/oom_adj is deprecated, please use /proc/3367/oom_score_adj instead.
sky2 0000:09:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
tobi

MAJOR Wireless, Safari, Dock & Finder issues after latest updates

I'm having major issues after the latest AirPort, Security Fix and Safari updates in 10.5.2: Safari keeps crashing every hour, Wireless connections time out and Airport occasionally crashes when I try to turn it off/on. Sometimes the systems gets stalled and has lag - I'm not sure if Safari crashing is causing this or it's the system that causes Safari to freeze and crash - often the dock becomes unresponsive too and makes me force shutdown and reboot. I've had to reboot like this more than 4 times today, something isn't right. My questions, therefore:
1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
Thanks in advance!

Hi Reinis,
In this situation, the first thing I would do is log into a different user account (if you do not have one, create one) and then see if the symptoms persist with the new user account. To directly answer your questions:
1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
Archive and Install using the OS DVD or by using Time Machine if you have it enabled.
2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
Fire up System Preferences, click on the Software Update icon and then select the Installed Updates tab.
3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
Console, which is in your Applications/Utilities folder.
Kryten

Airport Extreme (Dualband) Issues after latest update

So after the semi-recent 7.4.1 upgrades, I am having a persistent issue where my computer will drops its connection to my Airport Extreme Dualband for no reason. Most commonly, it happens after I have left the computer sitting overnight. After I come back, the computer will be connected to no networks, despite my network showing up as available. The computer is not on the move, and there are no signal issues. I am not totally positive which machine is responsible (i.e. if the computer is dropping the connection, or if the router is), but I was hoping to here whether anyone else is experiencing the problem.

Spent 8 hours last night with same issues. All issues really started after the update. I had just bought the new dual band, set up was smooth, then all **** broke loose after the X.1 update. A couple of things I noticed. 1) Same issues you had that if the computers sat, it took a good 5 minutes to get the network up again or "see" it 2) I use comcast and I have noticed that the dynamic is causing issues between the AE and modem (post update) 3) Every time I try to change settings on the AE to add Guest network, the whole network crashes and I have to go to complete hard boot, reset AE and do power start all the way out. 4) Comcast rep had me power cycle all of my hard wire gigabit routers off the AE. I was having issues until I did this. Apparently the AE keeps IP if you feed routers off of it. Going to revert to 7.4 right now.

Connectivity Issue After 1308 Update

Similar Messages

Maybe you are looking for