Connectivity issue -unknown host

Hi,
We have an File to File interface from SAP ECC to Click .We are getting unknown host exception while trying to connect from PI .We checked with Click team they confirmed there server is up and running .
Could you please advice what might be the issue?

Hi,
Check with Click team whether they have file server installed in there server machine or not?
By the way did u tried connecting from front end tools like filezilla or by connecting from os level ?
Regards
Venkat

Similar Messages

CRS 5 Backups fail with this error: Unknown error occured while connecting to the host

Dear All,
We have backup issue with UCCX 5.0(2)SR03_Build317, while trying to take backup giving following error "Unknown error occurred while connecting to the host".
I have found the solution in the Cisco and tried all the suggestion, still not working and same error observed. Due to backup issue we unable to do any changes on the CRS, when we try to create new agents, those agents are not reflecting in the CRS.
Also I have observed bellow error , when try to re-sync the JTAPI,
Error while handling the input   request.
Top of Form
Config Changes are not allowed during 'Backup' operation, which   was started by 'Scheduler' at 'Fri Jun 08 18:00:03 GMT+08:00 2012 '. Please   try again after 'Backup' is complete.
Bottom of Form
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00809a752c.shtml
Solution
Complete these steps in order to resolve this issue:
•1.      Access the UCCX server and navigate to Start > Run, and type CET.
•2.      When the warning message appears, click NO.
•3.      Choose com.cisco.crs.cluster.config.ArchiveAdminConfig.
•4.      On the right side, double-click the record ID.
•5.      Click the com.cisco.crs.cluster.config.ArchiveAdminConfig tab, and clear the password under Backup Storage.
•6.      Click Apply.
•7.      Navigate to Appadmin > Tools > Backup and Restore.
•8.      Under Backup Storage Location, type the new password, and click Update.
After you complete these steps, you can run the backup. If the backup fails, restart the server, and try the backup again. If the backup still fails, you can navigate to CET, clear all the fields, and then type the new information for the storage location.
Please help me with your suggestions.
Thanks & Regards,
Naveen .S

Please any one help me on this issue..

WS 2012R2 RDS Host Periodically Connection Issues

Hi all.
I have the next infrastracture:
1. DC on WS2008
2. New RDS Host on WS2012R2. Connection Broker and Licensing Server installed on same server.
Sometimes (about every 10 days) connection issues occurs. Users try to login, pass authentication successfully, then they "freeze" when settings must apply. The same time logged users can work without any problem, after some time they get black
screen, but server manager shows the sessions like active. I can connect via telnet to RDP-port, it looks like OK.
I solve the issue rebooting RDS Host till now.
In event viewer I see that user group policy doesn't apply since the issue occurs.
When we used WS2008 as Terminal Servers there was not the problem.
Any ideas?

Hi,
Thanks for posting in Windows Server Forum.
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous steps should be helpful for many similar scenarios.
If the issue still persists, please feel free to reply this post directly so we will be notified to follow it up.
BTW, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks for your Support & understanding.
Regards.
Dharmesh Solanki

DAC Server to DB Server Connection issue on Solaris 10

Hi,
I have a connection issue that has me completely miffed as to what is going on.
We have a Oracle DAC Server running on Solaris 10 that connects to the DAC repository inside a database on another host also running on Solaris 10. When I try and build a DAC execution plan I get an error where I unable to complete the build due to by repository connection being lost. Looking at the DAC logs you can see multiple entries of
32231 INFO Tue Oct 15 10:04:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32232 INFO Tue Oct 15 10:09:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32233 INFO Tue Oct 15 10:14:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32234 INFO Tue Oct 15 10:19:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32235 INFO Tue Oct 15 10:24:05 BST 2013 CONNECTION_ISSUE Repository ending polling
Then eventually you see connection lost.
When I check the DB host using dmesg I notice the following entry over and over
Oct 15 11:00:53 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
Oct 15 11:01:00 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge1: xcvr addr:0x0c - link is up 1000 Mbps full duplex
Oct 15 11:05:53 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
Oct 15 11:11:00 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge1: xcvr addr:0x0c - link is up 1000 Mbps full duplex
Oct 15 11:15:53 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
There is no entry for the link going down just up all the time. The timing in the logs match with the DAC logs which makes my think this is where the issue may lie.
root@v10emsu101 # dladm show-dev
bge0            link: up        speed: 1000 Mbps       duplex: full
bge1            link: unknown   speed: 0     Mbps       duplex: unknown
nxge0           link: up        speed: 1000 Mbps       duplex: full
nxge1           link: up        speed: 1000 Mbps       duplex: full
nxge2           link: up        speed: 1000 Mbps       duplex: full
nxge3           link: up        speed: 1000 Mbps       duplex: full
Does anyone have any idea on why this keeps occurring or can it safely be ignored?

Did you find a solution to your problem? It sounds like something we are experiencing.

Unknown Host sidhost (see /etc/hosts)

Hi experts,
    I'm facing a problem in maxdb please help us the issue
Error:
starting database instance ...
Error! Connection failed to node devhost for database DEV:
unknown host devhost (see /etc/hosts)
Opening Database...
Error! Connection failed to node devhost for database DEV:
unknown host devhost (see /etc/hosts)
connect to the database to verify the database is now open
dbmcli check finished with return code: 0
database start failed

Hi Deepak,
                   This is the DBM.PRT log file.
'db_warm' is being executed.
2014-02-28 09:50:00       4993 INF          1 DBMKnl   Sending an administrative statement to the database DEV on computer localhost
                          4993 INF          8 DBMKnl   Statement: RESTART
2014-02-28 09:50:50       4993 INF          3 DBMKnl   Received the result of an administrative statement from the database DEV on computer localhost
                          4993 INF          9 DBMKnl   Statement: RESTART
                          4993 INF         10 DBMKnl   Returncode: 0
2014-02-28 09:50:59       4993 INF        419 DBMSrv   Command 'db_warm' has ended with return code 0.
2014-02-28 09:50:59       4993 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 4991 on computer transids.transaltus.com).
2014-02-28 09:59:35       7407 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-02-28 09:59:35 (client process has process ID 7194 on computer transids.transaltus.com).
2014-02-28 09:59:36       7407 INF        283 DBMSrv   Command 'dban_start ...' is being executed.
2014-02-28 10:00:41       7407 INF        419 DBMSrv   Command 'dban_start' has ended with return code 0.
2014-02-28 10:16:57       7407 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 7194 on computer transids.transaltus.com).
2014-02-28 17:55:12      14698 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-02-28 17:55:12 (client process has process ID 14696 on computer transids.transaltus.com).
2014-02-28 17:55:12      14698 INF        283 DBMSrv   Command 'dban_stop' is being executed.
2014-02-28 17:55:14      14698 INF        419 DBMSrv   Command 'dban_stop' has ended with return code 0.
2014-02-28 17:55:14      14698 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14696 on computer transids.transaltus.com).
2014-02-28 17:55:15      14724 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-02-28 17:55:14 (client process has process ID 14722 on computer transids.transaltus.com).
2014-02-28 17:55:15      14724 INF        283 DBMSrv   Command 'db_cold' is being executed.
2014-02-28 17:55:15      14724 INF          1 DBMKnl   Sending an administrative statement to the database DEV on computer localhost
                         14724 INF          8 DBMKnl   Statement: SHUTDOWN
2014-02-28 17:55:15      14724 INF          3 DBMKnl   Received the result of an administrative statement from the database DEV on computer localhost
                         14724 INF          9 DBMKnl   Statement: SHUTDOWN
                         14724 INF         10 DBMKnl   Returncode: 0
2014-02-28 17:55:30      14724 INF        419 DBMSrv   Command 'db_cold' has ended with return code 0.
2014-02-28 17:55:30      14724 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14722 on computer transids.transaltus.com).
2014-02-28 17:55:30      14769 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-02-28 17:55:30 (client process has process ID 14767 on computer transids.transaltus.com).
2014-02-28 17:55:30      14769 INF        283 DBMSrv   Command 'db_offline' is being executed.
2014-02-28 17:55:32      14769 INF        419 DBMSrv   Command 'db_offline' has ended with return code 0.
2014-02-28 17:55:32      14769 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14767 on computer transids.transaltus.com).
2014-03-03 09:19:32       4829 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 09:19:32 (client process has process ID 4827 on computer transids.transaltus.com).
2014-03-03 09:19:32       4829 INF        283 DBMSrv   Command 'db_clear' is being executed.
2014-03-03 09:19:32       4829 INF        419 DBMSrv   Command 'db_clear' has ended with return code 0.
2014-03-03 09:19:32       4829 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 4827 on computer transids.transaltus.com).
2014-03-03 09:19:32       4834 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 09:19:32 (client process has process ID 4832 on computer transids.transaltus.com).
2014-03-03 09:19:32       4834 INF        283 DBMSrv   Command 'db_start' is being executed.
2014-03-03 09:19:47       4834 INF        419 DBMSrv   Command 'db_start' has ended with return code 0.
2014-03-03 09:19:47       4834 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 4832 on computer transids.transaltus.com).
2014-03-03 09:19:47       4879 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 09:19:47 (client process has process ID 4877 on computer transids.transaltus.com).
2014-03-03 09:19:47       4879 INF        283 DBMSrv   Command 'db_warm' is being executed.
2014-03-03 09:19:47       4879 INF          1 DBMKnl   Sending an administrative statement to the database DEV on computer localhost
                          4879 INF          8 DBMKnl   Statement: RESTART
2014-03-03 09:20:41       4879 INF          3 DBMKnl   Received the result of an administrative statement from the database DEV on computer localhost
                          4879 INF          9 DBMKnl   Statement: RESTART
                          4879 INF         10 DBMKnl   Returncode: 0
2014-03-03 09:20:50       4879 INF        419 DBMSrv   Command 'db_warm' has ended with return code 0.
2014-03-03 09:20:50       4879 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 4877 on computer transids.transaltus.com).
2014-03-03 09:39:11       7414 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 09:39:10 (client process has process ID 7098 on computer transids.transaltus.com).
2014-03-03 09:39:11       7414 INF        283 DBMSrv   Command 'dban_start ...' is being executed.
2014-03-03 09:40:01       7414 INF        419 DBMSrv   Command 'dban_start' has ended with return code 0.
2014-03-03 09:41:13       7414 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 7098 on computer transids.transaltus.com).
2014-03-03 17:44:38      14827 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 17:44:38 (client process has process ID 14825 on computer transids.transaltus.com).
2014-03-03 17:44:38      14827 INF        283 DBMSrv   Command 'dban_stop' is being executed.
2014-03-03 17:44:40      14827 INF        419 DBMSrv   Command 'dban_stop' has ended with return code 0.
2014-03-03 17:44:40      14827 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14825 on computer transids.transaltus.com).
2014-03-03 17:44:40      14853 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 17:44:40 (client process has process ID 14851 on computer transids.transaltus.com).
2014-03-03 17:44:40      14853 INF        283 DBMSrv   Command 'db_cold' is being executed.
2014-03-03 17:44:40      14853 INF          1 DBMKnl   Sending an administrative statement to the database DEV on computer localhost
                         14853 INF          8 DBMKnl   Statement: SHUTDOWN
2014-03-03 17:44:44      14853 INF          3 DBMKnl   Received the result of an administrative statement from the database DEV on computer localhost
                         14853 INF          9 DBMKnl   Statement: SHUTDOWN
                         14853 INF         10 DBMKnl   Returncode: 0
2014-03-03 17:45:00      14853 INF        419 DBMSrv   Command 'db_cold' has ended with return code 0.
2014-03-03 17:45:00      14853 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14851 on computer transids.transaltus.com).
2014-03-03 17:45:00      14902 INF          1 DBMSrvCo A DBM Server client connection was established at 2014-03-03 17:45:00 (client process has process ID 14900 on computer transids.transaltus.com).
2014-03-03 17:45:00      14902 INF        283 DBMSrv   Command 'db_offline' is being executed.
2014-03-03 17:45:01      14902 INF        419 DBMSrv   Command 'db_offline' has ended with return code 0.
2014-03-03 17:45:01      14902 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 14900 on computer transids.transaltus.com).

Duplicate Ethernet Interface - Connection Issues

Hi,
Recently, after rebooting, I had a continuous stream of error messages on my login terminal, and I couldn't connect to the network.
[ 669.236979] genirq: Flags mismatch irq 0. 00000080 (eth0) vs. 00015a20 (timer)
[ 670.235840] genirq: Flags mismatch irq 0. 00000080 (eth0) vs. 00015a20 (timer)
[ 671.234701] genirq: Flags mismatch irq 0. 00000080 (eth0) vs. 00015a20 (timer)
# ping www.google.com
ping: unknown host www.google.com
# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether de:34:07:d0:d9:29 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 ## Duplicate interfaces?
link/ether 00:24:1d:a2:f7:c5 brd ff:ff:ff:ff:ff:ff
# ifconfig eth0 up
SIOCSIFFLAGS: Device or resource busy
# ifconfig eth1 up
# dhcpcd eth1
dhcpcd[732]: version 5.6.4 starting
dhcpcd[732]: eth1: sending IPv6 Router Solicitation
dhcpcd[732]: eth1: rebinding lease of 192.168.1.3
dhcpcd[732]: eth1: acknowledged 192.168.1.3 from 192.168.1.1
dhcpcd[732]: eth1: checking for 192.168.1.3
dhcpcd[732]: eth1: sending IPv6 Router Solicitation
dhcpcd[732]: eth1: leased 192.168.1.3 for 2592000 seconds
dhcpcd[732]: forked to background, child pid 780
# ping www.google.com
64 bytes from bom03s02-in-f18.1e100.net (74.125.236.146): icmp_seq=1 ttl=56 time=11.6 ms
After manually configuring eth1, and assigning it an IP, everything works normally. Another bunch of curious messages at boot up were these:
[ 0.271521] pci 0000:01:07.0: BAR 1: error updating (0xfde00000 != 0x000000)
[ 0.271553] pci 0000:01:07.0: BAR 3: error updating (0xfdf10008 != 0x000008)
[ 0.271583] pci 0000:01:07.0: BAR 2: error updating (0x00c001 != 0x00cc09)
What would be a clean way to fix this?
Thanks in advance!

Thanks for the replies.
In an attempt to establish whether it was the computer or the router I plugged in an old speedtouch 510 router which I had lying around - this worked first time, so I guess it's the netgear that is the issue and I will need to reset it and re-enter all the details, unless anyone knows of a quicker way...?

[Solved] No network connection on cloud host

Where can I get started on trying to debug my issue of having no network connection on my server? It was working a few days ago.
Ping results in unknown host errors, and I my ethernet module, virtio_pci, is loaded when I run
lsmod
I can't ssh into my server, but I have "console" access through digitalocean's console service.
Thank you.
Last edited by lexan (2014-03-10 00:06:03)

Centzilius wrote:Oh okay... it was then propably initialized by netcfg (or something like that, outdated). Try this guide.
To get your network up and running for this, do the steps from recovering first.
That worked great! I didn't see their post.
Thanks a lot! :-)

HP PhotoSmart 7510 suddenly has severe connectivity issues

I have a HP PhotoSmart 7510 printer since about 2 months. Initial setup worked like a charm and the printer has been working pretty much perfectly for the last 2 months. Wireless printing, scanning and internet access on the printer (e.g. for Facebook photos) all worked. Just from time to time i would get the occasional (mildly annoying) message on my computer saying "scan to computer is currently unavailable" but it usually worked itself out and whenever I needed it to work, it did work.
But since a few days ago, it has some severe connectivity issues. I didn't change any settings on the printer, router or computer - the issues just started appearing by themselves. I startet getting much more frequent messages on my computer saying "scan to computer is currently unavailable". I noticed I couldn't print anymore, and restarting computer, printer and/or router didn't help at all. The only thing so far i managed to print wirelessly since the problems started were the first 5 pixel rows of an image I tried to print, the rest didn't transmit.
It seems the printer still connects to the WLAN but printing and scanning no longer work, and whenever I try to access a web service on the printer (like Facebook) it says it has no internet connection, even though the WLAN light is lit up (not blinking) and all the wireless status reports say "congratulations, no problems found" and display IPs etc. just like normal.
I looked at the threads "PhotoSmart 7510 connects to router, but not to the web.", "Wireless printer (HP Photosmart 7510) not connecting to network" and "Photosmart 7510 won't connect to Web Services" but they weren't a big help. Activating EWS didn't work because even though the printer showed its IP address to be 192.168.1.3, when I entered this in my web browser it didn't find the printers configuration page.
I tried the following steps from one of the threads:
1. Restore the Network defaults
2. Unplug the printers power cord while it is still on. Leave it unplugged and walk to the router.
3. While the router is still on, unplug the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once plugged back in the router should power on automatically.
4. Plug the power cord back into the printer. Once plugged back in the printer should power on automatically.
5. Run the Wireless Setup Wizard to reconnect the printer to your wireless network.
6. Try enabling Web Services.
I followed these steps exactly. Interestingly, even though I had done step 1 and restored the network settings to factory defaults, after turning back on, the printer somehow still had its old settings saved and reconnected to the network.
It seemed to have fixed the problem, the printer finally had internet access again (Facebook app showed my photos) and scan to computer found my PC. But after just about 3 minutes, the printer had lost its internet connectivity again. When opening the Facebook app, it displayed the same error message it did before. And printing no longer worked as well.
So, what is wrong with this printer?! It has the newest software update by the way (I checked during the 3 minutes it had internet access.) My computer is a HP Windows 7 x64 machine (EliteBook 6930p) and the router I'm using is a Netgear WNDR3700.
I specifically bought this printer for my studies at university. In one week i have my exams and in order to study I REALLY need to be able to print some of my course materials! So any help as quickly as possible would be greatly appreciated. Or do you think this is a case for a warranty replacement, considering the printer's really strange and error-prone behavior?
Thanks a lot!

I can assure you that it is not a router issue. It appears to me that it is a driver compatibility with Windows OS. After trying to get to the bottom of this since my Photosmart 7525 was new and reading just about every forum and blog, I have come to the conclusion that the issue must be related to the HP driver itself.
The issue does not seem to affect any Mac systems, and from one forum someone was able to fix it by downloading new drivers compatible with 64-bit systems (which seem to not be affected by the glitch). But that leaves us 32-bit people stuck with the current driver which does not work.
The printer is connected with good signal to the wireless router (no matter who's router it is and what configuration is made). The printer can be pinged from the router and any computer on the network which is not currently being affected by this issue. However, the affected computer fails pings by either request timed out, or destination host unreachable. Pings are successful from the affected computer to any other device on the network. The only way to recover (at least for a few days) is to reboot the affected computer.
Also, from the display on the 7525, the network tests pass without issue. I can also download and print content from the internet with no issues.
Please do a quick google search of this issue and you will see several THOUSAND entries of people with the same request. This is a serious issue that people are having and everything is pointing to an HP problem (not routers, improper installation of software or drivers, etc...). I agree with several other customers that HP should be on the hook for this fix. I will give it another couple weeks, then back to the store for a reliable unit from another competitor (Canon, Lexmark, etc..)
Thank you in advance for escalating this issue to product engineering,
S. Hunn
There are 10 kinds of people in this world... Those who understand binary and those who do not.

JCo 3.0 connectivity issues between Java application on NWCE and ERP

Requirement: We have a Java application that would run on NWCE. This application will be invoked from ERP/SAPGUI via HTML Controller. With SSO enabled, the goal is to pass ERP credentials to CE application. This CE application in turn will use ERP credentials from Logon ticket to connect to ERP and invoke BAPI calls (JCo 3.0 destination)
System Information:
CE System: SAP NW CE 7.2 SPS 04
ERP: SAP ECC 6.04
Both systems are trusted using X.509 certificates
Current scnerio:
1) Destination (CE to ERP) - JCo 3.0 using Authetication method of u201CCurrent User (Logon Ticket)u201D
- Web application is unable to find the JCo 3.0 destination.
2) Destination (CE to ERP) - JCo 3.0 using Authetication method of u201CTechnical Useru201D
- Web application is able to find the JCo destination
Any assiatance in resolving the issues would be appreciated ....
Trace Log:
#2.0 #2011 01 19 14:44:38:756#+0100#Error#com.sap.security.core.server.destinations.provider.DestinationsProviderFrame#
com.sap.getDestinationProperties()#BC-JAS-SEC#tcsecdestinations~provider#001F2960BE89048C0000000100005BC1#16777250000000004#sap.com/TestJcoWebEar#com.sap.security.core.server.destinations.provider.DestinationsProviderFrame#10207625#182##4286395D23D211E08BA2000001000022#d981f18323b011e0b5eb000001000022#d981f18323b011e0b5eb000001000022#0#Thread[HTTP Worker [@2002275007],5,Dedicated_Application_Thread]#Plain##
ASJ.dest.pr0023#

Hi Hemandra,
This is the Full error message i am getting
Message:   ASJ.dest.pr0023
Severity:   Error
Date:   2012-02-09
Time:   21:37:25:134
User:   SUPPLIER
Category:   /System/Security
Location:   com.sap.security.core.server.destinations.provider.DestinationsProviderFrame
Application:   XXXXXXXXXXXXXXXXXXXXXX
Thread:   Thread[HTTP Worker [@254542764],5,Dedicated_Application_Thread]
Data Source:   j2ee/cluster/server0/log/system/security.log
Arguments:
Passport User Activity ID:   1d2dfea9533811e1adf3000000dc2fc6
Message ID:   com.sap.getDestinationProperties()
Session:   11
Transaction:
Time Zone:   +0530
Customer Message Component:   BC-JAS-SEC
Runtime Component:   tcsecdestinations~provider
Correlation ID:   14430150000000004
Passport Session:   8703D330533611E19565000000DC2FC6
Passport Connection:   1d2dfea9533811e1adf3000000dc2fc6
Passport Connection Counter:   0
Host:   XXXXX
System:   XXX
Instance:   J01
Node:   server0
Log ID:   C000AC10088100FF0000000000002BF1
Regards,
Srinivas

Remote access VPN client gets connected fails on hosts in LAN

Hi,
VPN client gets connected fine, I have a inter VLAN routing happening on the switch in the LAN so all the LAN hosts have gateway IP on the switch, I have the defult route pointing to ASA inside interface on the switch, the switch I can reach after Remote Access VPN is connected how ever I cannot ping/connect to other hosts in the LAN and if I make the gateway point to the ASA then that host is accessible, any suggestions? I really want to have gateway to be the Switch as I have other networks reachable through the Switch (Intranet routing)

Hi Mashal,
Thanks for your time,
VPN Pool(Client) 192.168.100.0/24
Internal Subnets 192.9.200.0/24(VLAN 4000) and 192.168.2.0/24 (VLAN 1000)
=============
On the Switch
=============
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route
Gateway of last resort is 192.168.2.5 to network 0.0.0.0
     172.32.0.0/24 is subnetted, 1 subnets
C       172.32.0.0 is directly connected, Vlan101
C    192.168.200.0/24 is directly connected, Vlan2000
C    192.9.200.0/24 is directly connected, Vlan4000
S    192.168.250.0/24 [1/0] via 192.9.200.125
S    192.168.1.0/24 [1/0] via 192.9.200.125
C    192.168.2.0/24 is directly connected, Vlan1000
S    192.168.252.0/24 [1/0] via 192.9.200.125
S*   0.0.0.0/0 [1/0] via 192.168.2.5
===============
On ASA
===============
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route
Gateway of last resort is 172.32.0.2 to network 0.0.0.0
C    172.32.0.0 255.255.255.0 is directly connected, outside
C    192.9.200.0 255.255.255.0 is directly connected, inside
C    192.168.168.0 255.255.255.0 is directly connected, failover
C    192.168.2.0 255.255.255.0 is directly connected, MGMT
S    192.168.100.2 255.255.255.255 [1/0] via 172.32.0.2, outside
S    192.168.100.3 255.255.255.255 [1/0] via 172.32.0.2, outside
S*   0.0.0.0 0.0.0.0 [1/0] via 172.32.0.2, outside
We don't need route print on the PC for now as I can explain what is happening I can get complete access to the 192.168.2.0/24 (VLAN 1000) but for 192.9.200.0/24 (VLAN 4000) above from the switch I can only ping IP's on the switches/pair but cannot have any tcp connections, which explains the default route being pointed on the switch is on VLAN 1000, now my issue is How do I get access to VLAN 4000 as you can see these two are on different Interfaces/zones on the ASA and please note with default gateway pointing to ASA I will have access to both the VLAN's it is only when I move the gateway pointing to Switch I loose tcp connections to one VLAN depending on the default route on the being pointing to on the switch.
So we are left to do with how to on the switch with default route.

Connectivity issues for random phones in CUCM 8.6 on Vmware

I have a client that has problems with around half of there ip phones (6921 & 7945) after a situation with overheating in the serverroom.
The solutions was a 1 Publisher, 1 subscriber setup with each on a separate Vmware server.
The Publisher is connected to the Core Switch which is further connected to 4 distribution switches which again connect to 5 more distribution switches. They have around 200 ip phones connected to these switches that get assigned IP's with DHCP.
The physical disk that the Subscriber was on was destroyed the incident. The Publisher they recovered, but to do this they had to recreate the vm descriptor file and attach it to the flat-file.
So the current situation is that the system is running with only 1 Publisher and no Subscriber.
There is also a license warning in the CCM Admin section, stating a License Overage (2 nodes used, but only 1 licensed.)
The license status is not invalid though, and the license state is "Uploaded". This second node I suppose might be the Subscirber that no longer exists? The phones have more than enough licenses.
When powered up the system seems to run as it should, but only about half the phones have connectivity to and can register with CUCM.
I have tried to reboot some phones remotely by cutting the power on the switch interfaces where they are attached, but that made no difference.
The console log on the phones that are down show TFTP Timeout & File Transfer Error.
The phones that are up and running can be pinged successfully from the CUCM cli, but when pinging the others I get "Destination Host Unreachable".
The strange thing is that it seems completely random as to what phones are up or down. On all switches there are connected phones with both working and non-working connections to CUCM.
To try to pinpoint the fault I chose 2 devices on the same switch and compared the config for each interface, one that has connectivity and is registered, and one that does not have connectivity and is unreachable.
Everything seems to be identical so I can't see what causes this error on the one, but not on the other.
Also when I ping the ip phone with no connectivity to CUCM from any of the switches, the ping is successful.
Anyone know what could be the cause of this behaviour?

Hello and thank you for your time.
The phones get there IP’s from a DHCP Server (Not the built in one in CUCM, but an external server). I have tested that the DHCP process works by powering off a phone (one of the phones with connectivity issues), deleting the lease, and then powering the phone back on and seeing the device request and receive a new lease.
There is only one CCM group active and both servers are in this group with the Publisher as highest priority server. All phones are in the same Device Pool attached to this group.
There are a lot of warnings regarding dbReplication & missing node due to the subscriber being gone. Also there is an issue with NTP server (see below). I will post more on this tomorrow morning.
I have also attached the console log from one of the phones that can't register.
NTP Alert:
At Tue Jan 13 21:24:10 BRST 2015 on node 192.168.50.2; the following SyslogSeverityMatchFound events generated: SeverityMatch : Critical MatchedEvent : Jan 13 21:23:49 CUCMPUB user 2 ntpRunningStatus.sh: Primary node NTP server; 192.168.50.6; is currently inaccessible or down. Verify the network between the primary and secondary nodes. Check the status of NTP on both the primary and secondary nodes via CLI 'utils ntp status'. If the network is fine; try restarting NTP using CLI 'utils ntp restart'. AppID : Cisco Syslog Agent ClusterID : NodeID : CUCMPUB TimeStamp : Tue Jan 13 21:23:49 BRST 2015 SeverityMatch : Critical MatchedEvent : Jan 13 21:23:53 CUCMPUB user 2 ntpRunningStatus.sh: The local NTP client is off by more than the acceptable threshold of 3 seconds from its remote NTP system peer. The normal remedy is for NTP Watch Dog to automatically restart NTP. However; an unusual number of automatic NTP restarts have already occurred on this node. No additional automatic NTP restarts will be done until NTP time synchronization stabilizes. This is likely due to an excessive number of VMware Virtual Machine migrations or Storage VMotions. Please consult your VMware Infrastructure Support Team. AppID : Cisco Syslog Agent ClusterID : NodeID : CUCMPUB TimeStamp : Tue Jan 13 21:23:53 BRST 2015

Oracle RDB driver Version 3.01.00.01 Connectivity Issue

I have a SQL Server 2000 extended stored procedure connecting to an Oracle RDB data server via an ODBC connection (using Oracle RDB driver Version 3.01.00.01). The SQL Server 2000 runs on a Windows 2000 Server.
This extended stored procedure opens up multiple database connections and maintains them for processing. Usually, everything runs fine.
However, every so often, we have connectivity issues. What happens is as follows:
When we bring a station down and then try to reconnnect, our connection is denied, and we get the error: "recv() unexpected close Ret 0 Err#0 UNKNOWN Unknown WINSOCK Error 0". (This error is logged by the .dll running in the SQL Server processing space.) From the first time we receive a connectivity error like this until the Oracle RDB box is rebooted, we cannot establish another new ODBC connection to that Oracle RDB box --- whether we are trying to establish it programmatically or just via a "test connection" in the ODBC dialogue on the SQL Server box.
We can, however, establish an ODBC connection to another, identically configured, Oracle RDB box from the SQL Server box (without restarting the SQL Server box).
Has anyone had experience with instable connections from Windows system using the Oracle RDB driver to connect to the Oracle RDB? If not, can anyone point me in a direction that would help me research this? I am more familiar with SQL Server than Oracle, and the Oracle DBA on the other end isn't very accessible.
I'd really appreciate any help anyone can give me.
Thanks!

I got same error.. Are you already solve that problem? how? please help me. Thanks

IPad 2 is having connectivity issues since I updated to 8.0.2

My IPad 2 had connectivity for about 6 hours after I downloaded 8.0.2 last Saturday. Sunday morning I was back to NO SERVICE in the upper left hand corner. Yesterday I went to the Apple Store and they showed me how to reset the cellular data, and again I had my 3G back for 6 hours. Last night and again today we were back to NO SERVICE. Again I went to the Apple Store and they explained that there were a few phone models that were having cellular connectivity issues, but not IPads. Well, that's bunk, since I see the complaints that are exactly like mine all over the web. The Apple Store wiped my IPad clean and told me that if this is a software issue this should fix the problem. If this is a hardware issue then I will need to buy a new IPad.
Apple needs to own up to the problems that it caused with our devices. AT LEAST, we should be able to take the updates off of our IPads and go back to 7.0.
<Edited by Host>

If you can’t use a Bluetooth accessory or car kit

SFTP receiver error: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE

Hi,
When we try to send file over seeburger SFTP (receiver) we are getting the error as below.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true, >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true
But we are able to connect through filezilla . we are able to create and delete file using the same username and password which is being used in SFTP adapter.
we have imported the both dsa and rsa keys in SFTP partner folder in NWA. Even though we are getting same error.
Thanks,
Vinayak

Hi Ram,
we checked with network team and port 22 is open and they are able to ping to the target system.
we checked the seeburger logs and we see EOF received from remote site error:
Caused by: com.maverick.ssh.SshException: EOF received from remote side [Unknown cause]
#at com.maverick.ssh2.TransportProtocol.b(Unknown Source)
#at com.maverick.ssh2.TransportProtocol.i(Unknown Source)
#at com.maverick.ssh2.TransportProtocol.nextMessage(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter.d(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter.access$000(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter$_b.run(Unknown Source)
Thanks,
Vinayak.

Connection refused to host: connection timed out

I have been struggling with this problem a couple of days now so I really hope someone can help me. I am trying to get rmi to work in a NAT environment. We use a firewall, so I have opened port 1099 and 2020 which I use as a fixed port for communication (just to be sure it is not a firewall thing); I use the following code:
//server
public class ComputeEngine extends UnicastRemoteObject
implements Compute
public ComputeEngine() throws RemoteException {
super();
public String getMessage() {
return "you have successfully connected to the server";
public static void main(String[] args) {
if (System.getSecurityManager() == null) {
System.setSecurityManager(new RMISecurityManager());
try {
String port = args[0];
try {
RMISocketFactory.setSocketFactory(new FixedPortRMISocketFactory(Integer.parseInt(port)));
} catch (IOException e) {
e.printStackTrace();
LocateRegistry.createRegistry( 1099 );
catch (RemoteException e1) {
e1.printStackTrace();
String name = "rmi://localhost/Compute";
try {
Compute engine = new ComputeEngine();
Naming.rebind(name, engine);
System.out.println("ComputeEngine bound");
while(true); //stay alive
} catch (Exception e) {
System.err.println("ComputeEngine exception: " + e.getMessage());
e.printStackTrace();
public Socket createSocket(String host, int port)
throws IOException {
System.out.println("creating socket to host : " + host + " on port " + port);
return new Socket(host, port);
* Create a server socket on the specified port (port 0 indicates
* an anonymous port) and writes out some debugging info
* @param port the port number
* @return the server socket on the specified port
* @exception IOException if an I/O error occurs during server socket
* creation
* @since JDK1.1
public ServerSocket createServerSocket(int port)
throws IOException {
port = (port == 0 ? portnumber : port);
System.out.println("creating ServerSocket on port " + port);
return new ServerSocket(port);
//client
public class ComputePi {
public static void main(String args[]) {
if (System.getSecurityManager() == null) {
System.setSecurityManager(new RMISecurityManager());
try {
String name = "rmi://" + args[0] + "/Compute";
Compute comp = (Compute) Naming.lookup(name);
System.out.println("connected to server");
System.out.println(comp.getMessage());
} catch (Exception e) {
System.err.println("ComputePi exception: " + e.getMessage());
e.printStackTrace();
I start the client with:
java -Djava.security.policy=policy.all -jar client.jar 194.2.4.6:1099
I start the server with:
java -Djava.rmi.server.codebase="file:/C:\RMI\\server.jar" -Djava.rmi.server.hostname="194.2.4.6" -Djava.security.policy=policy.all -jar server.jar 2020
As you can see I set the "-Djava.rmi.server.hostname" property which should be a solution to the NAT problem. However I keep getting the following exception!!??!!:
ComputePi exception: Connection refused to host: 194.2.4.6; nested exception is:
     java.net.ConnectException: Connection timed out: connect
java.rmi.ConnectException: Connection refused to host: 194.2.4.6; nested exception is:
     java.net.ConnectException: Connection timed out: connect
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(Unknown Source)
     at sun.rmi.transport.tcp.TCPChannel.createConnection(Unknown Source)
     at sun.rmi.transport.tcp.TCPChannel.newConnection(Unknown Source)
     at sun.rmi.server.UnicastRef.newCall(Unknown Source)
     at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     at java.rmi.Naming.lookup(Unknown Source)
     at client.ComputePi.main(ComputePi.java:14)
Caused by: java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(Unknown Source)
     at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(Unknown Source)
     ... 7 more
Can anyone help me with this, please??????
kind regards,
Christiaan

Yes, i can ping it from the client.
I have also noticed that when i run my server with the option -Djava.rmi.server.hostname=IP the applications stops automatically after a few minuts...
I'm not using nothing about codebase. I have the stub and skel classes in server and client machines..
I add the complete exception:
Client exception: java.rmi.ConnectException: Connection refused to host: external_IP; nested exception is:
java.net.ConnectException: Connection timed out: connect
java.rmi.ConnectException: Connection refused to host: external_IP; nested exception is:
java.net.ConnectException: Connection timed out: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:567)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:185
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:171)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:101)
at example.hello.Server_Stub.sayHello(Unknown Source)
at example.hello.Client.main(Client.java:55)
Caused by: java.net.ConnectException: Connection timed out: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:426)
at java.net.Socket.connect(Socket.java:376)
at java.net.Socket.<init>(Socket.java:291)
at java.net.Socket.<init>(Socket.java:119)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirect
SocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMaster
SocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:562)
... 5 more

Connectivity issue -unknown host

Similar Messages

Maybe you are looking for