Connectivity issue with LeapPad and Mountain Lion

Has anyone else had issue with connecting a Leappad game console with Mountain lion? I keep getting an error message asking me to switch off and then on again to solve the problem, but it doesn't solve the problem..... I have tried manually giving the Leapster an ip address but whatever i try just fails.. HELP.???

I have the same issue and have contacted tech support.
This is the response I have from them:
Hi,
Thank you for your email,
Unfortunately there is some issues currently with MAC OSX Mountain Lion and the Leappad Explorer drivers. We have been in contact with apple regarding this solution and have developed a fix for the issue. This will be implemented in Apple's next OSX update which should be soon.
If you have any other questions please let us know,
Regards
Don't Miss Out
To ensure that your LeapFrog emails get to your inbox, please add [email protected] to your email Address Book or Safe List.

Similar Messages

  • Bluetooth issue with iPad and mountain lion

    My iPad will pair with my iMac, but it will not connect - since I installed Mountain Lion.  It will pair AND connect with Snow Lion.  Is this a 'new' OS 10.8 issue?

    To print (printer pro) from my iPad.  But since it doesn't even connect....

  • Non NVidia graphics card issues with Adobe and Mountain Lion

    It took me a while to figure it out, but now I am certain. If using a Mac with a non nvidia graphics card there will be issues in Mountain Lion while using Adobe products. I tested this with Illustrator CS6 for over a year on 5 different Mac computers.
    Here is what happens
    As soon as I open Illustrator on a Mac without a NVidia graphics card and I attend to apply an shadow effect, Illustrator crashes. If I do this procedure on a Mac with a NVidia inside, all works well.
    I tested this on the following Macs
    MacBook Pro (Early 2009) with NVidia 9600M GT - it works
    MacBook Pro (Early 2011) with Radeon 6750M - doesn't work
    Mac Pro (Early 2009) with Radeo HD 5770 - doesn't work
    The same Mac Pro (Early 2009) with NVidia GT120 - it works
    MacBook Air (Mid 2012) with Intel HD 4000 - doesn't work
    iMac (Late 2012) with NVidia 680MX - it works
    Since I owned all these Macs, I could test it several times with different kind of software updates. 10.8, 10.8.1, 10.8.2 and 10.8.3 did deliver the same result. Everytime the same result.
    Already got in touch with Adobe
    With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
    What can be done, to resolve this issue? I cannot buy only Macs with NVidia inside, since the small portable front of Macs is only coming with Intel graphics cards. And is there anybody out there, having this issue? I cannot be the only one, using shadows in Illustrator.

    With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
    A typical response.  IMO it's most likely a combination of Adobe's reluctance to fix the issue combined with Apple's desire for advancement and change.  I've personally experienced several things that've become broken owing to Apple changing fundamental aspects of the OS, and the developers of the third-party software in question have either never fixed their software, or are taking their sweet time.  WireTap Studio and Snapz Pro from Ambrosia are a case in point, though they eventually fixed Snapz Pro.  Eventually…
    Frankly, good luck getting either side to do anything about this.  Your best bet is probably getting in touch with AppleCare and seeing if you can get this escalated to Engineering, but I wouldn't hold your breath for a fix from either party.  Or perhaps one of the Apple mailing lists will prove useful.

  • Selling a 2009 Mac with FCP and Mountain Lion?

    I am selling my 2009 iMac and I would like to reset it to the factory settings, BUT I would like to also keep Final Cut Studio and Mountain Lion on it. Is this possible? If not, is there a work-around?

    As for the OS (Mountain Lion), no you cannot. Unfortunately, the license is not transferable for any OS purchased at the app store. You will need to erase and reinstall the original OS; if you leave ML on it, the buyer will never be able to reinstall as the purchase/license is tied to your Apple ID forever. You also need to give the buyer the original install disks. I'd tell the buyer that I've discounted the price by $20 so he can buy ML with his own Apple ID since it wouldn't work with my ID.
    If you purchased Final Cut on retail disks, then yes, you are allowed to sell or transfer those as long as you do not retain a copy, and you must give the disks to the buyer. It won't do him any good without the disks in case there needs to be a reinstall. If you purchased it at the app store, the same license applies: any app purchased at the app store is not transferable and will not work reliably as Apple's servers would be able to detect its presence on another machine with a different ID.
    There is no workaround - this is what is required legally; if you wish to do something else, no one here is going to suggest anything as we would be violating the ToU of these forums.

  • Anyone having issues with MacBook Pro2,2 with sleep and Mountain Lion?

    Since installing Mountain Lion on my MacBook Pro (2,2, June 2007), I am unable to put my machine to sleep. I close cover and the fan keeps running.
    Anybody have any ideas how to fix this?

    Scroll through this board to see the varied problems with ML, I don't think Apple even bothered to test Logic with ML,  many problems with interface freeze/lag, also some problems with audio stuttering. Don't know how much longer Snow Leopard will be supported but I'm staying there as long as possible. Sorry I don't have better news.

  • Connection issues after upgrade to Mountain Lion

    Very strange internet connection problem here after upgrade to Mountain Lion.
    I just upgraded MacBook (early 2009) to Mountain Lion. After upgrade, I'm having problems connecting to certain websites (ESPN, CNN, etc.), and I can't connect to the computer using LogMeIn.
    BUT, I do have an internet connection. Skype works, Messages works, email works, some websites work. I tested using speedtest.net and it shows good download speed, but the upload speed is so slow that it can't even perform the test. A Windows PC on the same network works fine.
    Next, I tested the MacBook on another wi-fi network at a coffee house, and everything works fine there!
    So it might appear to be something wrong with the router? I have an Cisco (Linksys) E3200 and have upgraded to the latest firmware (1.0.4). But still doesn't work.
    The firewall in Mountain Lion is turned off, and I temporarily turned off the firewall on the router and that didn't help, so doesn't appear to be any sort of firewall issue. I've never heard of an operating system being incompatible with a specific router anyway.
    Can anyone thing of any setting or something in Mountain Lion that would causing internet connection problems with a specific router?

    I don't know if this will 'fix' your problem, but have you tried the 10.8.5 Supplemental Update -> http://support.apple.com/kb/DL1686?
    Clinton

  • Audio USB crackles on MBP with Retina and Mountain Lion

    I have a USB device connected to my MacBook Pro with Retina Display and the audio crackles no matter what I play.  I hardly have any processing working and there are no other USB devices.  I think that this was working under Lion but I think this is a problem under Mountain Lion.  Anyone else have this problem?  I am trying to determine whether the problem is in the MBP or the OS...  Thanks :-)

    Could be it needs to be connected to both USB port by using a Y USB cable to supply enough power to it. And it won't show up unless there is a CD or DVD disc in it.

  • Scanning software to work with CS6 and Mountain Lion

    Since I upgrading my Mac to OS Mountain Lion 10.8 and downloaded Adobe CS 6 I have been unable to get my Epson Scanner to work properly. Since none of the drivers from the Epson and Adobe websites have worked so that I could scan from photoshop, I am looking into using third party software. Adobe mentioned VueScan in their instructions, but it is expensive and I don't like how it is laid out. It appears that SilverFast only works with 32 bit not the 64 required in CS6.
    Has anyone else found scanning software that worked for them?
    Or does anyone have an idea of getting the Epson software to work on my machine?
    The scanner is an Epson Perfection v600 photo scanner, which is still being sold currently as something that works with new computers.

    I have a scanner. I am trying to get a driver or new scanner software to work with it. Someone in a different discussion pointed out an article in MacWorld that goes into why this is not working.
    http://www.macworld.com/article/1168305/get_your_scanner_to_work_with_photoshop_cs6.html
    I would still be interested to know if anyone has had a positive experience with third party scanning sofware. Vue scan? Silverfast?
    Also to the Adobe staff :
    This is quoted from the MacWorld article.
    Right now, if users are running Mountain Lion (OS X 10.8), they will not be able to scan into Photoshop CS6 as described. According to Adobe, this is an across-the-board problem with the Cocoa classes comprising the scanning interface that it is using in Photoshop. It is neither a user nor a scanner manufacturer issue.
    Adobe is aware of the problem, has identified it as an Apple OS issue that they are working with Apple to solve, and offer no time frame for when it will be fixed. "
    Any idea on the timeframe or if there will be an anouncement when this is resolved?

  • PROBLEMS WITH JAMVOX AND MOUNTAIN LION ?

    I USE THE JAMVOX GUITAR INTERFACE WITH MY MACBOOK PRO. EVERYTHING WAS WORKING HUNKY DORY AFTER UPGRADING TO MOUNTAIN LION...BUT THEN, AFTER ABOUT THREE WEEKS, IT JUST STOPPED WORKING. EVERY TIME I TRY TO START THE PROGRAM NOW,  GET THE SPINNING MAC "WAIT"  BALL. IM SEEING ON VOX'S WEBSITE THAT OTHERS ARE ALSO HAVING SIMILAR PROBLEMS. HAS ANYONE FIGURED OUT A WORK AROUND ? MANY THANKS FOR THE HELP.

    I am truly disappointed in the new operating system, is there anyway to switch back to OSX Lion and perhaps get my money back?
    Why do you think that is the normal performance for Mountain Lion?
    First thing to try is boot into Safe Mode by holding down the Shift key on restart.
    It will take a little while to boot as it runs some disk checks. Once it is done, it will show the login screen. Log in and try it out. If everything seems normal, you likely have some third-party software that is incompatible with ML.
    If it is still messed up, boot into the Recovery HD (cmd-r on restart) and Repair the disk using Disk Utility.
    Restart and see if there are still problems.
    If so, I would reinstall ML and see if that fixes the issues.

  • Video "Dropouts" with FCS and Mountain Lion

    I would like to see if anyone else is having this problem and maybe save some folks from the experience.
    I have two macs.
    #1- Imac, 2.93, core 2 duo, 4g ram, 24".
    #2-Macbook Pro, 17", 2.53, 4g
    4t g-raids
    Clean Install done on Imac of Mountain Lion.  Reloaded fcs.
    Did NOT touch macbook.  Still running Snow Leopard.
    Working on large video job...1080 60i, avchd, panny cam.
    Went to transfer footage using all usual settings.
    Video on imac looked like "old school" video drop outs.  As you can imagine, it was a long night to figure this out.
    Erased footage and hooked up my g-raids to the Macbook.  Looked fine.
    Took hard drives back to imac, tried transfer again.  Stuttering and drop outs continued.
    Back to Macbook with Snow Leopard, no problems.  My guy is editing job right now on Macbook.
    I am in the middle of a clean install of Snow Leopard on the imac.  I'm gonna have to send the "boys" out to get my $20 bucks back from Apple.
    Thought I'd post it in case someone sees same thing and thinks they are crazy.
    Mountain lion could not capture footage without drops.  Snow Leopard (my trusty os) did it all.
    Shocked I say, Apple....Shocked.  (Not really, been down this road before) Never believe what they say.  Don't upgrade unless forced by gunpoint.

    This is the FCP X forum - you should ask this question in the Final Cut Studio forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io
    Andy

  • Is there a problem with Airport and Mountain Lion?

    Since upgrading to Mountain Lion, I am having all kinds of trouble connecting to the web. My connection drops and my network will not relaunch? Is anyone else having this problem?
    Thanks
    Chuck

    It wasn't Mountain Lion, it was my moving my stuff to a place that had a internet address conflict. I redid all of mine, and now is working fine.

  • Problems with pages and mountain lion

    Hey i just updated my iwork, and installed mountain lion, solely for the iwork icloud feature. I do a lot of work on my ipad and it would be very useful if they would sync with my macbook. But unfortunately when i create a new document in pages for the icloud it just says the files name and has a picture of a cloud underneath with "waiting" next to it. Why is this??

    Hey i just updated my iwork, and installed mountain lion, solely for the iwork icloud feature. I do a lot of work on my ipad and it would be very useful if they would sync with my macbook. But unfortunately when i create a new document in pages for the icloud it just says the files name and has a picture of a cloud underneath with "waiting" next to it. Why is this??

  • Notes don't sync with iphone and mountain lion

    I upgraded to mountain lion and I cannot get my notes to sync for the life of me. So now I have notes on my iphone and separate notes on my computer. They never sync, so they are virtually worthless. What the heck happened? I don't use iCloud. In the past, I just clicked sync and the notes would be the same on the computer and iphone. Simple. How can I fix this??

    Syncing Notes using iTunes is no longer supported on OS X v10.8 and later. Read more here:
    http://support.apple.com/kb/HT4191

  • Help with computer and Mountain Lion

    I am running Snow Leopard on my iMac but cannot upgrade to Mountain Lion because my computer was purchased in early 2007. Is there any way to get the iCloud for this computer?

    If your Mac meets the following requirements you can upgrade to Lion:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    However Lion is not available directly from the Mac App Store, having been replaced by Mountain Lion, but you should be able to get it by ringing 1-800-MY-APPLE if you're in the USA, or the number given at bottom left of this page for other countries.

  • Potential Problems with Airplay and Mountain Lion

    Hey Everyone,
    I recently purchased an Apple TV, and I tried to use Airplay with our Macbook Pros. Airplay would work with all of the iOS Devices, but when it came to using with the MBP, it would either show a black screen, or a frozen image of my screen. I called AppleCare, and the rep told me it was a problem with the AppleTV, so I returned it and bought a new one, and it did the same thing. I found out that the problem was occuring because of the type of router I was using. I have a dualband router, and I set everything on one band of the router. I decided to try to place the laptops on a different band, and that's all it took. My airplay now works flawlessly.
    So, if you're having a problem with airplay, and you have a dualband router, try placing your computer & iOS devices on the opposite band, and it should work perfectly.
    Hope this helps.
    - Kaytie Walters

    The VPN log looks like:
    1      13:34:36.904  09/11/12  Sev=Warning/3
    CM/0xA3100027
    Adapter address 10.211.55.6 has changed or not detected.  Current address(es): 10.98.70.169.
    2      13:34:52.044  09/11/12  Sev=Warning/2
    CVPND/0xA340000E
    Failed to get adapter index.
    3      13:35:07.044  09/11/12  Sev=Warning/2
    CVPND/0xA340000E
    Failed to get adapter index.
    4      13:35:07.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
    5      13:35:08.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
    6      13:35:09.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
    7      13:35:10.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
    8      13:35:11.861  09/11/12  Sev=Warning/2
    IKE/0xA3000067
    Received an IPC message during invalid state (IKE_MAIN:512)
    9      13:35:12.407  09/11/12  Sev=Warning/2
    IKE/0xA3000067
    Received an IPC message during invalid state (IKE_MAIN:512)

Maybe you are looking for

  • My verticle Spry menu will not work in Internet Explorer

    I know a lot of people have posted about similar issues, and I've researched multiple "solutions" on multiple forums for something that will work, but nothing has solved the problem so far. Here is a link to the prototype homepage: http://www.abrasiv

  • How can I get synched audio through the computer rather than camera in FCE?

    There does not seem to be an easy way to listen to FCE audio through the computer's setup for internal or external speakers. I have for years used Detour to route all of my audio through an M-Audio Firewire 410 interface, and then on to my home stere

  • I would like some help in determining the proper structure/implementation

    I would like some help in determining the proper structure/implementation for the following scenario: I have ~10 steel rods that have been equipped with a strain gauge.  The most I would have is ~30 steel rods. Each setup has had a 10 point calibrati

  • How to Set UserId in Http Header for SSO?

    Hello All, I have a requirement to set the userid into the HTTP Header so that i can use the "Header Variables for User Authentication" module provided by SAP to achieve the SSO . Could some 1 let me know how can I achieve this? I know abt the HTTPSe

  • Multi company network

    Hi! I'm asked to setup a multi company network. There will be approximately 4-8 small companies around 8-15 people in each company. These companies will share some resources as printers and probably a nas. Furthermore they will have their own wlan ss