Connectivity of APO 3.0A and ERP6.0

Hi Experts,
We have a plan to upgrade R/4.6C to ERP6.0 in near future, and we consider to connect APO 3.0A to ERP6.0 for a while as one of options for some reason though finally we will go to SCM.
So now my question is...
Are there any actual case about connectivity of APO 3.0A and ERP6.0? And if you know some cases, could you kindly give me information about considerable points, difficulty and the solutions etc.
Thank you so much in advance.
Katsuya

Hi Katsuya,
You can very well integrate APO 3.0 with ERP 6.0. But as
you see, ERP you are choosing is at a higher version and
APO you are choosing is at a lower version comparatively.
Hence you may get many operational errors during
integration part, livecache installation area, stability area etc.,
There could be more changes of data compatability leading
to data mismatches which creates inconsistencies etc.,
For more details, you can check the related documentations
under the link
https://websmp110.sap-ag.de/upgrade-scm
Regards
R. Senthil Mareeswaran.

Similar Messages

How to find rfc connection exist between R/3 and APO ?

Hi all,
i wanted to find out...
rfc connection exist between R/3 and APO ?
kindly help in this regard..
Thanks
Joshi

Hi Sridhar,
If u have access to SM59 transaction then u can check and test the connection there it self.
If u don't have access then check the table RFCDES where all RFC destinatios defined for your system is stored.
Thanks,
Vinod.

My iphone is connected to wireless but itunes and appstore doesnt work. Safari doesnt open websites?

My WiFi is connected to my iphone 5s but if I will open the appstore,itunes etc they say 'cannot connect to app store'. And if I open Safari, there is no 'server'. I restart my iphone but nothing changes. Please help me. Thank You. (Excuse me for my bad English)

You may not really be connected to your WiFi network.
Your router may not have given your iPhone a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Do not reset your router. Next, reset network settings on your iPhone (Settings > General > Reset > Reset Network Settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Connection between CRM back end and ASP front end website for Ecommerce

Hi All,
I want to establish the connection between a ASP website and CRM back end server(we are replacing th existing ERP back end system with SAP CRM ).
I want to know whether I have to go with XI or any other connectors provided by SAP to establsih the communication between the existing ASP website and CRM back end server..
Can anyone please help me out.
Thank you,

Okay here is the general concept for your scenario:
-You will call standard/custom RFC's(could be BAPI's) in the CRM system from the existing application.
-You will need to write a new model layer in your ASP application that calls the RFC layer in CRM
-You decide what data you want to use from CRM in your application
Let's assume at minimum you will want to use the product master, business partner master, and business transactions. You will need RFC's/BAPI's for every interaction point where you will consume/publish data to CRM.
So when an user creates an order from your e-commerce site, you will need to support saving an order in CRM. This is example of how you need to map out each function in your existing site to a part of the CRM system. Since we don't know what your site currently does, this is something you would have to do.
Once you have mapped out the business level data to the CRM system, then you can evaluate where you will need a BAPI and/or RFC call. Once that is done, then you can look at the CRM system and see what standard pieces can be called. Then everything else is custom development. Your ASP application will call CRM via RFC.
It is possible to do what you want to do, but it is going to require a lot mapping work and a fair amount of development effort to integrate the two pieces. I don't know if you might be better off looking at the SAP Internet Sales Solution instead so you could focus only customizing that application, instead of worrying about an integration problem. It just depends on how much special functionality your existing e-commerce site has today.
My general recommendation would be for you to hire a consultant that has done an SAP e-commerce project using SAP CRM in the past and let them guide you on the implementation issues. An on-site resource could better answer your "high-level" questions.
However if you have more questions please ask and I will try to answer to the best of my knowledge.
Good luck,
Stephen

Regarding connection between front end HTML and back end SQL 7.0

Hi!!
I am working on the project 'ERM'. I have designed 12 forms using HTML. Can u please give me brief idea how to establish the connection between a back end and front end i.e. between HTML and SQL 7.0. If possible can u provide me the source code for the same.
I will be very thankful to you.
Thanks,
Jigar.

Read up about multi-tier applications.
You need servlet and JSPs for the server-side presentation layer, some classes for the business logic, and some mor for the persistence layer either using JDBC or some framework like Hibernate.

When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??

When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??

Download this for getting media off your ipod!http://www.macupdate.com/app/mac/19890/ipoddisk
Hope this helped!

HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H.

When I log into my Hotmail account now, it now connects to 'microsoft windows (US)' and not to 'UK' which could be why some downloads and sending/receiving emails frequently run very slowly. What's changed and how to I revert this back to windows UK

Below is the thread from/with Windows Live Solution Center which should tell you me issues. Let me know if you need any further information please.
>
>
>
Windows Live Julius M.
Hi chriswhitehead,
I would like to make some clarifications.
> Did you change any information on account.live.com specifically on the location/country?
> Did you change the timezone and locale of your computer?
> When did you experience this latency?
> Did you add a lot of softwares on your computer?
> Did you change your ISP provider?
Thanks,
Hello Julius M
Sorry I haven't got back to you before now but I've had a few problems trying to make this reply.
I was using firefox as my Explorer. When I tried to open your message the system kept looping between 'hotmail logon' and 'connecting' and didn't get anywhere. Also, when I clicked on the 'reply' radio button below your message, nothing happened. ......I've now gone back to using Explorer 8 to try to reply.
to answer your questions:
>I haven't changed any information in account.live.
>I haven't changed the timezone or locale of this computer.
>I experience this latency about 3 weeks ago when a message popped up saying that it had been noticed that I was connected to the US server and did I want to revert back to the UK server. Unfortunately the message didn't stay on the screen long enough for me to click OK of for me to see who sent it. It may have been Microsoft or possibly from Firefox. Just before this, I had downloaded and installed several critical MS updates for Win 7.
>I haven't added any software to this computer recently.
>I haven't changed my ISP provider.
I have uninstalled Firefox and will try again with a fresh installation. Possibly Firefox went wibbly.
Thanks
Report as Abuse
Chris Whitehead
Julius M
I've just reloaded Firefox Ver 9 and the problem still exists.
Opening your link in firefox just loops and can't find a connection.
Also, I can't make a reply.
It seems that Firefox doesn't like Win Live Solution Centre or WLSC doesn't like Firefox.
Report as Abuse
It works OK in IE8 (but Internet Explorer lacks the refinements of other explorers... changability, bookmarks etc)
Hi chriswhitehead,
Since according to you, you did not change any information on your account information, therefore this is issue is not account related. Furthermore, since you did not change your ISP provider therefore this is not an internet connection issue.
It appears that this is a browser issue since you don't have problems with IE8 and the preferred browser does not work well with Hotmail. I have some suggest: please try to deactivate the firewall and access Hotmail via Firefox. If this does not work, please try to open your Hotmail via Firefox using other computer.
Thanks,
Windows Live Julius M.
Hi Julius M
I've tried again with Mozilla Firefox and it failed to allow me to properly open your reply and went into a ' connecting loop' when I tried to send.
IE8 works OK. This reply is with the Opera Browser. Let me know if you get this OK and I will advise Mozilla that their system is defective.
Regards
Chris Whitehead
Hi Chris,
Yes, your reply was posted properly. You can inform Mozilla about the issue.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

How to connect my iPad, Brother printer, and AirPort Extreme?

How to connect my iPad, Brother printer, and AirPort Extreme?

I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

HT1178 i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

You probably can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

New error with upgrade jboss/tomcat: "Connection handle has been closed and is unusable"

Hi,
This error suddenly appeared when we upgraded from jboss3/tomcat5.0 to jboss4.2/tomcat5.5.
here's the usecase:
1) User clicks on report link
2) Crystal reports web componnent displays screen to fill in report parameters.
3) user enters parameters and clicks submit
4) System throws Exception
The same reports worked fine with jboss 3.2.6/tomcat 5.0. We haven't touched anything in this realm.
Log Excerpt:
09:42:18,842 INFO [datasource] Openning rowset
09:42:18,904 ERROR [reportdefinition] com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: Connection handle has been closed and is unusable
09:42:18,905 ERROR [datasource] Failed to open rowset: the query failed to open rowset
com.crystaldecisions.reports.reportdefinition.datainterface.g: JDBC Error: Connection handle has been closed and is unusable
 at com.crystaldecisions.reports.reportdefinition.datainterface.d.a(Unknown Source)
To try to narrow down the problem, I've updated the jdbc configuration to
 <track-statements>true</track-statements>
here's a recap:
This Boolean element specifies whether to check for unclosed statements when a connection is returned to the pool. If it is true, a warning message is issued for each unclosed statement. If the log4j category org.jboss.resource.adapter.jdbc.WrappedConnection has trace level enabled, a stack trace of the connection close call is logged as well. This is a debug feature that can be turned off in production.
Interestingly enough, this error appears slightly upstream:
(CachedConnectionManager.java:526) - Closing a connection for you. Please close them yourself: org.jboss.resource.adapter.jdbc.WrappedConnection@c76003
java.lang.Throwable: STACKTRACE
 at
org.jboss.resource.adapter.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:88)
 at com.crystaldecisions.reports.queryengine.driverImpl.k.a(Unknown Source)
 at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
 at com.crystaldecisions.reports.queryengine.av.new(Unknown Source)
 at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
 at com.crystaldecisions.reports.dataengine.ba.try(Unknown Source)
 at com.crystaldecisions.reports.common.av.a(Unknown Source)
 at com.crystaldecisions.reports.common.ag.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown
So the question arises:
1) Is the jboss datasource overly/aggressively closing result sets?
2) or is there a coding error in CRXIR2?
thanks,
bill
Full stack trace:
[2008-03-13 17:26:18,905] [INFO ] org.jboss.resource.connectionmanager.CachedConnectionManager (CachedConnectionManager.java:526) - Closing a connection for you. Please close them yourself: org.jboss.resource.adapter.jdbc.WrappedConnection@c76003
java.lang.Throwable: STACKTRACE
 at org.jboss.resource.connectionmanager.CachedConnectionManager.registerConnection(CachedConnectionManager.java:290)
 at org.jboss.resource.connectionmanager.BaseConnectionManager2.allocateConnection(BaseConnectionManager2.java:417)
 at org.jboss.resource.connectionmanager.BaseConnectionManager2$ConnectionManagerProxy.allocateConnection(BaseConnectionManager2.java:842)
 at org.jboss.resource.adapter.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:88)
 at com.crystaldecisions.reports.queryengine.driverImpl.k.a(Unknown Source)
 at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
 at com.crystaldecisions.reports.queryengine.av.new(Unknown Source)
 at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
 at com.crystaldecisions.reports.dataengine.ba.try(Unknown Source)
 at com.crystaldecisions.reports.common.av.a(Unknown Source)
 at com.crystaldecisions.reports.common.ag.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.v.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.v.if(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
 at com.crystaldecisions.reports.sdk.DatabaseController.setTableLocation(Unknown Source)
 at org.apache.jsp.reports.processreport_jsp.switchTables(processreport_jsp.java:131)
 at org.apache.jsp.reports.processreport_jsp.loadReport(processreport_jsp.java:68)
 at org.apache.jsp.reports.processreport_jsp._jspService(processreport_jsp.java:227)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:387)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.participate.shared.pagecache.client.PageCacheFilter.doFilter(PageCacheFilter.java:760)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.participate.util.servlet.ExpiredPasswordFilter.doFilter(ExpiredPasswordFilter.java:92)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.participate.pe.channels.client.servlet.ChannelUrlFilter.processUrl(ChannelUrlFilter.java:168)
 at com.participate.pe.channels.client.servlet.ChannelUrlFilter.doFilter(ChannelUrlFilter.java:100)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.participate.util.servlet.BlockIpAddressFilter.doFilter(BlockIpAddressFilter.java:224)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.outstart.multiapp.filters.KeepOtherSessionsAliveFilter.doFilter(KeepOtherSessionsAliveFilter.java:88)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.participate.util.servlet.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:151)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
 at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
 at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
 at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
 at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
 at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
 at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
 at java.lang.Thread.run(Thread.java:619)


OK. I found the problem along with a workaround.


The problem:


a programming practice clashes with a new jboss 'safety check'.


Programming practice:


crystal reports gets a database connection in one jsp page, then tries to use it on another jsp/servlet


Jboss safety check:
Jboss/tomcat new comes configured out-of-the-box with a 'cached connection
manager', which


"Check[s] for unclosed connections and transaction terminated checks in servlets/jsps."


 Summary


In short, if a servlet/jsp ends and it leaves a database connection open, Jboss will automatically close it.




Workaround: 
Comment out two entries in these two files:


1) conf/jboss4/pe/deploy/jboss-web.deployer/server.xml


2) conf/jboss4/pe/deploy/jboss-web.deployer/META-INF/jboss-service.xml


The two entries:




1)


 <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" 
 cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" 
 transactionManagerObjectName="jboss:service=TransactionManager" /> 


2)


 <depends>jboss.jca:service=CachedConnectionManager</depends> 




Comments on the workaround


The 'cached connection manager' basically makes sure that the application cleans up after bad programmers. It seems most helpful in development, load testing, or trouble shooting.


In production, you can likely comment them out with minimal
impact on the application.

I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.

I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.
To do this I will need a 2x1 HDMI splitter or a 2x1 HDMI auto switch (preferred).
?Is there any Apple TV HDMI port voltage?
When using a HDMI auto switch to connect two devices to a HDMI TV, the
Auto switch cable box only works for components that do not output continuous voltage over HDMI port when turned off.
Do you know of any other solutions? Componets? Actual expierances?
Full text below.
Cable : HDMI switches expand the number of available HDMI ports on a high definition television allowing connection of cable boxes, Blu-ray players, and game consoles. A side benefit is that cable clutter is also eliminated by running a single HDMI cable to your HDTV from a switch and relocating the HDMI ports to a concealed location. The problem with most HDMI switches is that you have to either get up to push a button, or hunt for the remote control, to switch sources. The true mark of any great switching component is an ability to perform its function and remain transparent in its operation. This automatic HDMI switch is a plug-and-play away from offering everything you are looking for in an HDMI switch. Select a single output from up to three devices for signal delivery to your HDTV. Smart operation provides complete control for connect-and-forget operation. Powering on a device gives it output priority over the other devices. By powering down the device in use, output priority is returned to the last powered on device. Note: Auto switch function only works for components that do not output continuous voltage over HDMI port when turned off.
Here is a typical HDMI 3-in 1-Out HDMI Auto Switch
http://www.google.com/products/catalog?q=hdmi+auto+splitter&rls=com.microsoft:en -us&oe=UTF-8&startIndex=&startPage=1&rlz=1I7GGLF_en&um=1&ie=UTF-8&tbm=shop&cid=1 0340892278237558532&sa=X&ei=fTPmTtOiHuXq0gGc3sHfBQ&ved=0CHsQ8wIwAA#
Thanks for any help. Sincerely,
HDMI auto switch?

Hi Erico,
I tried what you said again but without success. I even updated the driver so that that audio driver is the same as the graphics driver i.e.. NVIDIA but this has not helped either:
Do you have any other ideas?
Many many thanks,
Louise

I downloaded iOS 8.2 and now my phone won't connect to the iTunes store, and my iTunes Match is turned off and won't turn back on...

I downloaded iOS 8.2 on my iPhone 5s 32 GB and now my phone won't connect to the iTunes store, and my iTunes Match is turned off and won't turn back on... I'm trying to log in from Settings > iTunes & App Store... not working... I have reset the phone twice, tried via cell service, and rebooted my wireless router..

As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
https://www.apple.com/support/systemstatus/
Edit

I don't have a wireless printer, and want to print things off of my iPad. I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

I don't have a wireless printer, and want to print things off of my iPad. I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

I don't think you can connect a printer since you won't have the printer drivers. I use FingerPrint from collobos.com to print to my non-AirPrint printers.

Connectivity of APO 3.0A and ERP6.0

Similar Messages

Maybe you are looking for