Connectivity of internet on sim2
I have bought Nokia 110. When i operate/run internet on mobile broswer or other broswer on mobile i can easily operate/run internet using sim1 or sim2. But when i connect my mobile to computer it and start the dialing it only connect of sim1. I have update the software, downloaded a new pc suit and also select sim2 option for data packet from sell phone in sim manager. How can i cannect internet to sim2 throuhg my pc. I already asked this question in a place every one told me that you should operate internet to sim1 why you need to sim2. Because i have two sims one for day time internet packages one for night internet packages. So, to change sim again and agian it creates me problemsl Kindly solve this issue.
Same issue here with a Nokia 310. Beside the SIM-Manager, AT+XSIM=1 allows to switch the AT command interface to SIM2. Even after appending this command into the extended init strings within the Microsoft Device Manager » Modem (AT+XSIM=1;+CGDCONT…) I was not able to dial-up with SIM2.
Similar Messages
-
Unable to connect to Internet using C2-03 as a mod...
Hi
I have a Nokia C2-03 phone. I have two Sims sim1 is Airtel and Sim2 is Tata docomo. I am using tata docomo for internet browing. its working fine when browing from the handset but when i connect it to my desktop which has windows xp 64 bit os i get the error Packet Data connection unavailable. i have received the settings from the service provider saved them and restarted the mobile but the issue persists.
Any help in resolving this problem will be hugely appreciated.
Thanks & Regards
FlaviazzuHi Flaviazzu,
Thank you for your post and welcome to the forums!
Since you can use the packet data on your phone but not on your computer may mean that your operator does not allow you to use your data access via tethering. We would recommend that you review the terms and conditions of your service and see if it mentions anything about tethering. If tethering is allowed in your contract, please follow the instructions below to set up your internet connection.
To create an internet connection for the first time, do the following:
You can find the latest available Nokia Suite from your local support site
In the Nokia Suite Home view, click Tools -> Options -> Connect to Internet
Depending on the device model you are using, the internet connection is created as follows:
The connection is created automatically or you need to select the operator to be used when creating an internet connection. From the list that shows the operators in your country, select your home operator (in other words the operator to whose network you have subscribed to). Then click OK.
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users! -
Adobe cloud application manager - can not connect to internet
To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct - Sydney Australia
Question:
1. Is anybody else having this problem
2. How do we fix
I already changed the time zone east coast US - did not change anything
Could it be a corrupt program - thus requiring to reinstall program Application manager
I am using Windows 7.
It has been like it for ten days - It asks to log in everytime I turn computer on
All programs in Creative Cloud work
Any suggestions and solution
Online help and phone help had no solutions other than what I suggested - that is reload application manager
Thanks for help
Ian ClelandThe Creative Cloud File Synching was just offline, should be online now again.
See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
Maybe that was your problem. -
System failed when try connecting to internet
hi
yesterday i install arch and everything work fine but
when i tried to make bluetooth connection via network manager(bluetooth)(gnome shell) by click on 'Access the internet using your phone(DUN)' checkbox after Few moments DUN service gone timed out. then i reinstall modemmanager and at last i can create connection via bluetooth(DUN Service) . but when i clicked on connection in connection menu; after few moment system crash and a black screen with a lot Incomprehensible text show and i have to reset computer manually.
anybody can help to me ????
THQ
Last edited by hamidtb (2013-03-29 10:49:59)WonderWoofy wrote:
This might be one of the more confusing and less than clear questions I have come across here. I don't use gnome or really any of this software that you use. But from what I can decipher above, you seem to have two problems.
First, it is not connecting consistently. In order to fix this, you reinstall the software? Am I reading that right?
Second, once you do get a connection, you experience a kernel panic? This is where the kernel has an oops and cannot recover, so it dumps its contents/errors to the screen. Is this what is happening?
Basically, you need to be more clear about what you are experiencing. It would seem that English is not your first language, but that should not stop you from at least phrasing your question in a way that says more than "I click this" and "I click that". Have you checked your logs at all to see if there is anything revealing there?
hi
thank you for answer
you said right and i so sorry for it; i'm from iran and my first language is persian(farsi)
weak document and support for my language Caused to i come there
yes i reinstall modemmanager package and timeout error disappeared
before my system connect to internet a black screen show and system crashed
also i tried to make a connection via below link but i unsuccess because it not compatible with my arch
https://wiki.archlinux.org/index.php/Bl … GPRS_Howto
is possible if i install another version of linux kernel my problem solved??
where save error log ??? -
How do I connect to internet with vz access manager for iphone 4S?
I have VZ Access Manager on my laptop and want to use it to connect to internet on my new iphone 4S. How do I do this?
If you can set up an Ad Hoc wireless network from your laptop, you could use it that way. Once again VZ Access Manager will not enter into the sharing part.
Plug these search terms into Google:
set up an ad hoc network
You'll find lots of instructions.
Best of luck. -
My macbook pro cannot connect to internet via wifi
I have a Macbook Pro 2010 OS X 10.8.3. I cannot connect to internet via wifi (Air por). My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password. when I type in my password a dialog box gives me timeout error. Please could anyone help me. I am using ethernet for my connection at the moment. Do I need to reset my macbookpro? if yes, what will happen to my applications and operating system (mountain lion)?
MonirehWhen you use the Airport utility what happens?
What is in the System Preferences control panel for Network settings?
http://www.apple.com/support/airport - there is a forum just for Airport Community
Airport Express FAQ
http://support.apple.com/kb/HT1515
Wi-Fi Setup Considerations
Things to consider before you begin
Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
When using Ethernet, Cat6 cable is recommended.
The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
You will need to consider what AirPort Utility settings to adopt.
You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
AirPort Discussions
Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
More
Direct you to the proper forum for MacBook :
MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forums
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro -
Cannot install Firefox. When I click on the link on the Mozilla website, it goes to an "error loading page". My network connection and Internet Explorer are fuctioning normally.
== computer was recently wiped clean and am now reinstalling all previous software and applications ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
So any ideas on how to fix it other than the link giving would help.
Thanks. -
Remote access VPN clients connected to Internet from VPN
Greetings,
I need to let remote VPN clients to connect to Internet from the same ASA VPN server
" client connects to ASA through VPN tunnel from outside interface then access Internet from the same ASA from outside interface again
thanksyou'll need to configure 'same-security-traffic permit intra-interface' on the ASA .
Also, need to setup the corresponding nat statements for your clients pool range.
i.e.
global (outside) 1 interface
nat (outside) 1 access-list anyconnectacl
where anyconnectacl is the pool for your clients:
access-list anyconnectacl permit ip 172.16.1.0 255.255.255.0 any -
i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance
i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance
-
Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.
From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found -
ISA B2B logon Error: No valid private connection for internet user
Hello ,
i used isauseradm to create a user zzweb with all authorizations for B2B..
now when i try to log to
http://host:port/b2b/b2b/init.do with the user zzweb
i have a runtime error with the logs :
EXCEPTION]
#1#com.sap.isa.businessobject.BORuntimeException: Error getting private connection for internet user:com.sap.isa.core.eai.BackendException: Error: No valid private connection for internet userzzweb
at com.sap.isa.businessobject.BusinessObjectHelper.splitException(BusinessObjectHelper.java:78)
at com.sap.isa.user.businessobject.UserBase.login(UserBase.java:313)
at com.sap.isa.businessobject.User.login(User.java:143)
at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:295)
at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:368)
at com.sap.isa.user.action.UserBaseAction.performLogin(UserBaseAction.java:126)
at com.sap.isa.user.action.LoginBaseAction.ecomPerform(LoginBaseAction.java:77)
at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
what does this error means..?
i also realised that zzweb was not created in CRM backen? should it be created ?
many thnx for help ..
Message was edited by: BlackmanIts a late response... but if someone gets the same issue here is the solution.
When you register try uppercase password . That should take care of that issue.
The problem is with function module CRM_ISA_IUSER_SWITCH , Note 946536.
Although the note says 5.0 the problem exists with ISA 4.0 too -
My ipod touch is connected to the wifi but when I get on safari it says "cannot open page because not connected to internet." SOMEONE PLEASE HELP!!!!
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router.
- Reset network settings on the iPod: Settings>General>Reset>Reset Network settings
- The troubleshjooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
Safari and mail will not load but i am connected to internet and can download form itunes and other sourses is that HD failure? any suggestions ? verify disk says its OK
iOS 4: Updating your device to iOS 5 or later - Support - Apple
iOS: Unable to update or restore - Support - Apple
iTunes for Windows: iTunes Store connection troubleshooting
See if any of these three may help. -
just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???
I just had a similar problem. Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it. if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on. i had to turn bluetooth off and then manually enter the DNS number.
My solution also came after I re-started my network and reset all the settings on the ipad2. The DNS number then showed along with IP submet Mask and router. I used that dns number to enter into ipad1 after turning bluetooth off on it.
Totally unscientific fix that may have been more coincidental than correct but you might try it. BTW--no idea how bluetooth even got turned on to begin with. -
Updated and can't connect to internet
I just updated my Mac and I cannot connect to the Internet anymore.
What does the error sign say?
How is your Mac connected for internet access - dial-up, DSL, Cable, wireless, ethernet cable to router?
Cheers, Top
Maybe you are looking for
-
Does home sharing allow me to share my iTunes library with other users on the same imac
Does home sharing allow me to share my iTunes library with other users on the same imac?
-
Characteristic "Master Data" setting in Query definition not working?
Hi, I am having a problem with a query definition. (BI 7.0) The query comprises the following definition which relate to displaying Milestone dates for respective projects in a time series so the dates are populated in the correct column in a time se
-
Java application compiles java files in memory
how can I use java application program (that may call method runtime exec or some other techniques) to compile the other java files that were already loaded in memory. (I can not copy those target files to the hard disk with extension java, then comp
-
Exporting SharePoint List to Excel it adds special / weird characters
It's probably an escape code but they're not uniform. When exporting a SharePoint List to Excel there is one column that is a multi-select lookup column and upon export between each item in that column there are a few special characters. #68 and #7
-
HT201250 how do i remove all backups from another macbook that has been sold
How do i remove all backup data from time capsule for an old mac?