Connector cap for changing processors

I'm going to remove the large heatsink so I can re-seat my Northbridge chip heatsink, so I have two questions
1. Do I apply Thermal paste to the north bridge heatsink?
2. Where can I get a connector cap to cover the socket while chip is removed?
Thanks!

I have not had a iMac open but more Macs solder the CPU to the board. Welcome to the way Apple does things. They don't want you messing with the hardware.

Similar Messages

Lost 30 pin dock connector cap - need info as to where I can replace it

I feel I'm alone in the universe. I have lost the little white 30 pin dock connector cap for my 3G, 15 Gb iPod. Does anyone know how I can get some replacement caps? Apple does not seem to offer them as a after sale item. I have searched iLounge and found a mythical reference to a filco product called the Dock protector cap but one reference link was dead and the other put me through to a Japanese Amazon page that was unintelligible. Are there any domestic products available? A quick look at Belkin and Griffin came up empty. Please help!

here is the link to protectorz
Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

Any Way to Change Thickness of Connector Lines for all lines of a Chart?

Post Author: ScottL
CA Forum: Charts and Graphs
Hi All,
I am trying to change the thickness of a Chart's Connector Lines for all lines of a chart and cannot find a way to accomplish this. I can go into Report Preview and individually change the thickness one at a time, but what if I do not know how many lines I will have (as in a Line Chart) ? I can't find a way to do this through Crystal Reports XI.
Many thanks in advance!
Scott

I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
Jerry

SWF panel listener for changed selection

In short, my question is as follows. Is it possible to create a listener which
detects when the current selection in the Flash authoring tool has changed,
and informs my SWF panel? This does not have to be a listener per se,
it can be some hand-crafted process which consumes some reasonable amount of processor time.
I describe my question more precisely below.
Suppose that I want to create an SWF extension panel for Flash (in Flash or Flex),
and I would like the panel to display a property of the object currently selected on scene
in the Flash IDE -- like the instance name of the object (if it exists).
I can use JSFL to detect the instance name of the selected object, and pass the string to the
SWF panel using call(), for instance. The problem is that I don't know how
to detect that the user has selected the object, or that the selection has changed.
Ideally, I would like to add an event listener that listens for such an action in the flash authoring tool.
However, using JSFL, this does not seem to be possible (I can only listen to events such as frame changed
or layer changed, but not selection changed).
I tried the following solutions:
1. Periodically check in JSFL whether the current selection has changed.
The problem is that in JSFL, there is no sleep function, or anything alike. The javascript
methods setInterval and setTimeout do not work in JSFL. Therefore, in order to periodically check for changes,
one must actively loop. This is extremely resource-consuming -- in fact, it hangs the flash IDE.
2. The periodic check can be triggered by the SWF panel itself. In actionscript, I can use setInterval to periodically
invoke the selection update function via JSFL. I have set the interval to 400 milliseconds, which gives a reasonably quick
reaction to changes. However, the functionality I want to implement is in fact more complicated than just retrieving the
instance name of the selected object. As a consequence, performing this operation every 400 milliseconds still consumes
too much processor time (the flash IDE consumes 30% of my processor time, even if the user doesn't do anything).
Therefore, I still would like to find a solution which does not use the processor when the user does not do anything in the Flash IDE.

I'm trying to do the same thing. Did you find a solution?

HT5024 It states that it takes 24hrs for changes to come into effect. However, what does it mean that it may retains my review in the system indefinitely, so if I rate it 1 star by accident, and changed it to rate 5 stars, the 1 star rating is not removed

It states that it takes 24hrs for changes to come into effect. However, what does it mean that it may retain my review in the system indefinitely? So if I rate it 1 star by accident, and changed it to rate 5 stars, the 1 star rating is not removed?

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

CPU Capping for whole system

Hello!
I am test running Solaris on one of the CloudServer service providers. I am in a situation where I only subscribe for 1Ghz CPU. There is not a hard limit so overuse is charged extra for.
I found out that I could use CPU capping like this:
$ prctl -t privileged -n zone.cpu-cap -v 50 -i zone global
(only use 50% of one CPU)
But my installation has multiple zones and setting capping for global zone do not limit the other zones of the system.
So my question is:
Is it possible to set capping for the whole system (like 50% of one CPU) including all zones? And then have the zones competing for CPU time using Fair Share Scheduling?
Best regards,
- Morten Green Hermansen
Edited by: 900653 on 2011-12-05 12:46

mortengh wrote:
Hello!
I am test running Solaris on one of the CloudServer service providers. I am in a situation where I only subscribe for 1Ghz CPU. There is not a hard limit so overuse is charged extra for.
I found out that I could use CPU capping like this:
$ prctl -t privileged -n zone.cpu-cap -v 50 -i zone global
(only use 50% of one CPU)
But my installation has multiple zones and setting capping for global zone do not limit the other zones of the system.
So my question is:
Is it possible to set capping for the whole system (like 50% of one CPU) including all zones? And then have the zones competing for CPU time using Fair Share Scheduling?
Best regards,
- Morten Green Hermansen
Edited by: 900653 on 2011-12-05 12:461) Be very careful if you mean Virtual CPU (aka thread), core, or chip/module.
2) If you allocate the cpu's you dont want to a resource pool via a processor, and dont run anything associated with that pool, that might achieve the effect if i understand you correctly, which i may not.

My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

Hi all,
Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
Anyway,
I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
Mine doesn't.
I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
I have had this phone for several years and it has never done this.
It worked absolutely fine, until I loaded the latest version of iTunes it seems...
Any suggestions?
Many thanks

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

User Exit/ Badi for Changing Quant parameters during TO Creation

Hi Gurus,
Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
I will highly appreciate reply from Gurus.
Regards,
Gupta M

Hi manish,
Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
Thanks,
Shibashis

Iphone 4s not syncing to iTunes *waiting for changes to be applied*

I have a brand new iphone 4s that wouldnt sync with my pc desktop and i recently got a new mbp and the same thing is happening an error keeps popping up in Itunes after the 2nd step of syncing and it says waiting for changes to be applied. Its really frustrating i restored my phone and it did nothing for the syncing just deleted all my apps...and ive researched these problem before and its obvioius a big occurance with other users and apple has done nothing?!?! wth !! and i have no voice memos on my phone so there is nothing to delete for those that have solved their issue that way....So if someone has a solution to help me sync my iphone 4s to my mbp i would greatly appreciate since obviously apple does not care to fix this issue!!!! terrible..

also tried to wifi sync and nothing ...

Solution: Syncing with my iTunes library an endless headache: Songs don't transfer, or songs transfer and show up as "other," or I get double copies, or "Over Capacity," or stuck on "waiting for changes to be applied."

iPod Touch 5g, 64GB, iOS 7.1. After my iPod data began showing up "Other," after an abrupt disconnection from iTunes during a sync I've spent the last week trying to fix it only to be thwarted at every attempt. I've tried resetting and restoring 6 or 7 times now, and all goes well until it gets to copying my library of music over. What I finally figured out is that 8,000+ songs is too many for iTunes to process all at once for some reason.
After several nights of leaving it connected all night I would find that the songs had physically copied and were occupying the ~45 gb of space on my iPod's storage, but were not showing up on my local library, instead listed as "Other" in iTunes and otherwise unusuable, or they would show up, but I'd have ~45 gigs of "Other," 45 gigs of "Audio," and would be "Over Capacity," by 30 gigs or so. OR it would be "Waiting for Changes to be Applied," for 12+ hours.
My work around: In iTunes, under the "Music" / "Sync Music" tab, instead of syncing "Entire Music Library," select "Selected Playlists, Artists, Albums, and Genres." You will have to indivually select the playlists, artists, albums, or genres and kept each bulk tansfer to <2000 songs at a time. The easiest way for me to do this was by selecting one genre at a time and copying it over. I had already taken the time to organize my library into 10 genres, you probably have more than 10. This is irritating and time consuming, but it's better than resetting my iPod over and over and over again to no avail.
Waiting for Changes? What iTunes is actually doing when it says it is "Waiting for Changes," or "Waiting for Items to Copy." iTunes for whatever reason does not reveal the relevent data being processed during a sync (didn't it used to?), but there are a couple ways you can decipher what it is actually up to. The first option is on the iPod; under Settings>General>iTunes Wi-Fi Sync it will tell you what it is up to during syncing. The other way on the iPod; under Music>Songs, scroll all the way to the bottom to see where it is at in the process. What iTunes, iTunes Wi-Fi Sync, and the bottom of the Songs library report are not always in agreement, but seeing all three will give you a better approximation of where you are in the syncing process and whether or not it is hanging.
This for me was successful as a workaround, but this is not a solution. Apple needs to fix this crap. Maybe they just want to make it so difficult to have a physical library of music on the local storage of the iPod that we will just give up and sign up for their Match service.

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

Cant able to see new value and old value for change in purchase order text

Hi all ,
I am not able to see changes done in material's purchase order text in material master. When i use tcode MM04 to see changes done material master it does not report new and old value for change if it is done in purchase order text of that material .
Thanks in advance ,
Shikha

Hi Shikha,
I'm not sure it works or not. But you can try SCU3 t.code and table DBTABLOG. May it can help you out.
I also faced this type of issue in Plant data and it get resolved.
Try and let me know...
Regards
Sunil Sisodia

Table to look for change documents for users

Hi friends,
Is there any standard table to look for change documents for a user?change document through SUIM does not give the correct log.
Thanks for you support.

Julius
Looking at another of Tracy's other post (http://scn.sap.com/thread/3598947) she's trying to use ACL. Hence needing to know the tables to write joins/queries to hit tables within ACL
I've seen ACL used and have had the fun experience of Auditors using Google to find tables to perform checks on without context of what has actually been implemented in their particular system.
Regards
Colleen

What is the path or TC for changing control of recon account in vendor

Hi Gurus,
Pl tell the TC or Path for changing the reconciliation account control for vendor as like in asset recon account.
Pl itsUrgens
Thanks in advance

Hi:
What i guess from your requirement that you need to control the field Reconciliation account, some users should be allowed to change the recon account and other should be restricted from doing so? If i am right then you can do that easily with the help of BASIS guy. F_LFA1_AEN Customer: Change Authorization for Certain Fields will do the needful for you.
Ask your Basis consultant to implement authorization's checks against F_LFA1_AEN for this Transaction code for the user profiles as desired by you. Before that do the necessary customization in SPRO as follows:
Define your change groups in the task level menu of Financial Accounting >A/R & A/P -> Credit management -> Define Field group-> Assign Fields -> Groups.
While assigning you can find the field LFB1-AKONT . Your issue will be resolved.
Regards

BAPI for changing delivery date and delivery time fields in LIKP table

Hi All,
Is there any BAPI or function module to change the delivery date and delivery time in LIKP table ?
Please tell me experts if exists.
Thank you,
Raghu.

try these:
BAPI/FM to update LIKP and VTTK tables
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bapi-for-changing-sales-headertable-likp-662800

Stuck on "waiting for changes" to be applied during a restore from backup

I am on an iPhone 5s and before installing iOS 8, I made sure to create a backup of everything on my phone onto my laptop. The iOS 8 download completed and during the install, it would get stuck on a white screen with a black apple and a status bar 1/4 complete. I waited several hours and nothing changed, so I talked to someone at Apple and they said that I needed to restore the iPhone, get iOS 8 up and running, then restore my phone from my latest backup which was made with the most recent version of iOS 7. The restore on the phone worked fine to bring it back to factory settings, then I went to restore from my backup on my laptop and this seemed to be working fine as it had my text messages, emails, etc., but it only has 1.5 pages of app icons (half of which are blacked out) and my iTunes remains on Step 5 of 5 "Waiting for changes to be applied". After several hours, I cancelled this backup restore and attempted to do it again, but the same thing happens. Is it possible to have a corrupt Backup? and if so, what should I do?
Thanks.

Try this previous discussion:
"Waiting for changes to be applied": Apple Support Communities

Connector cap for changing processors

Similar Messages

Maybe you are looking for