Connector Error: u2018Function module u201C/CRYSTAL/GET_OSQL_OBJECT_LISTu201D not found

Hello experts,
I have installed Crystal Reports 2008 (not BO Edge) and BusinessObjects Integration Kit for SAP on my laptop and I try to connect my crystal reports to the SAP ECC 6.0 data source. After establishing a connection I can see the following groups in the Available Data Sources: CL [Data Clusters], DD [Data Dictionary] and FN [ABAP Function modules]. However when I try to open them, I get messages:
- Database Connector Error: u2018Function module u201C/CRYSTAL/GET_OSQL_OBJECT_LISTu201D not found.u2019
- Database Connector Error: u2018RFC_INVALID_HANDLEu2019
Could you please give some advice, what is missing?
Best regards,
Marcin

Hi Ingo,
The Installation Guide u201CBusiness Objects Integration Kit for SAP u2013 Installation and Configurationu201D (created on 01.10.2008, where you are the author) that is listed on the integration kit download page:
https://www.sdn.sap.com/irj/boc/index?rid=/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da [original link is broken]
refers to BusinessObjects Enterprise / SAP NetWeaver BI combination.
As I am interested in the Crystal Reports 2008 / mySAP ERP combination I searched for further documents and could find the following, where the ABAP transports are described:
u201EBusiness Objects XI Integration for SAP Solutions Installation Guideu201D issued on 03.06.2008
and
u201EBusiness Objects XI Integration for SAP Solutions Installation and Administration Guideu201D issued on 02.12.2008.
Is one of these documents the u201Einstallation guide for the SAP Integration Kitu201D that you mentioned? If not, could you please send the link to the installation guide you mean, where the ABAP transports for Crystal Reports 2008 / mySAP ERP combination are described? That would be very helpful.
Marcin

Similar Messages

Database Connector Error: u2018Function module u201C/CRYSTAL/GET_OSQL_OBJECT_LISTu201D

Hello experts,
I have installed on my laptop Crystal Reports 2008 (not BO Edge) and BusinessObjects Integration Kit for SAP and I would like to connect my crystal reports to the SAP Data Source (SAP ECC 6.0). After establishing a connection I get the following groups in the Available Data Sources: CL [Data Clusters], DD [Data Dictionary] and FN [ABAP Function modules]. However when trying to open them, I get messages:
- Database Connector Error: u2018Function module u201C/CRYSTAL/GET_OSQL_OBJECT_LISTu201D not found.u2019
- Database Connector Error: u2018RFC_INVALID_HANDLEu2019
Could you please help?
Best regards,
Marcin

The problem is solved. Here is the solution:
Re: Connector Error: u2018Function module u201C/CRYSTAL/GET_OSQL_OBJECT_LISTu201D not found
Best regards,
Marcin

Preview error function module "CRYSTAL/MDX_GET_STREAM_INFO" not found

Hi,
I cannot preview the report I created in Crystal Report 2008. Here is 1st error message "Failed to retrieve data from the database. Then the 2nd error message is "Database connector error: : Function module 'CRYSTAL/MDX_GET_STREAM_INFO' not found. My data source is from MDX query.
Thanks in advance.
Rose

Hi
Contact your basis administrator to ensure
- All the transports have been installed properly.
- Check the version of Crystal Reports and BusinessObjects and the SAP MDX driver version.
For CRXIR2 +BOXIR2 this issue was resolved in CHF15.
Regards
Sourashree

Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found

Good day Masters
I am not able to connect to our SAP ECC6.0 because of the below error
Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found
is this function modules exists on the transport files ? do you think by executing the transport this problem will be resolved ?
and how we can execute the transport files from Basis perspective ,,, our basis tried to execute this transport to they got belw error
" file might be currapted "
Regards

Hi
your BASIS administrator should copy the transport files in the import queue and use the STMS transaction to import them in your system. Make sure to import the UNICODE version in the order as shown in the transports_<your language>.txt file.
Make sure that the files are indeed imported.
Which version of BOBJ are you using?
Regards,
Stratos

Error initializing ejb-module; Exception javac.exe not found under

Dear all,
I got followings error after i had tried to doing some lab.I had checked the folder "C:\Program Files\Oracle\jre\1.3.1" exists but missed but missing javac.exe. Could anyone can advice me what is going wrong?
04/04/14 16:44:20 Auto-deploying - web/WEB-INF/classes (No previous deployment found)...
04/04/14 16:44:20 Error instantiating application 'lab04' at file:/C:/share/oc4j
/labs/lab04/: Error initializing ejb-module; Exception javac.exe not found under
C:\Program Files\Oracle\jre\1.3.1, please use a valid jdk or specify the locati
on of your java compiler in server.xml using the <java-compiler .../> tag
Thanks in advance!
Best Regards,
Chris CHIU

Dear Chris,
The answer lies in the error message you got, namely:
please use a valid jdkAccording to your post, you don't have a JDK, you only have a JRE. The javac compiler is part of the JDK, it is not part of the JRE.
You can download the JDK from the J2SE Download Web page. Look for the Download J2SE SDK link -- do not choose the Download J2SE JRE link!
Good Luck,
Avi.

"/CRYSTAL/MDX_GET_STREAM_INFO" not found.

Hi Ingo.
Iu2019ve read many of your articles regarding BO and SAP and they help me a lot.
Now I kindly ask you to help me regarding to the MDX driver.
Iu2019m getting the following error:
Database Connector Error: 'Function module "/CRYSTAL/MDX_GET_STREAM_INFO" not found.'
Iu2019ve installed the required requires ABAP Transports successfully during the installation of the SAP Integration Kit. Iu2019ve also selected under Settings "Use MDX driver with support for Multiple structures" however the error still appears.
Iu2019ve used tcode se37 to search for the above mentioned function and it doesnu2019t exist, the only functions that were installed on the system with ABAP Transports are (/CRYSTAL*):
/CRYSTAL/FLAT                  Business Objects' InfoSet reporting
/CRYSTAL/BUILD_STRING          Convert mbcs itab to utf-8 string
/CRYSTAL/CALL_QUERY            Execute query in dialog mode
/CRYSTAL/CALL_QUERY_BTC_STREAM Call queries in batch mode
/CRYSTAL/GET_BATCH_INFO        Get batch system info
/CRYSTAL/GET_FUNCAREA_CATALOG Get restricted list of Info Sets
/CRYSTAL/GET_FUNCAREA_INFO     Get Info Set meta data
/CRYSTAL/GET_LOGON_LANGUAGE    Retrieve the logon language for the current session
/CRYSTAL/GET_QUERY_CATALOG     Get the restricted list of queries
/CRYSTAL/GET_QUERY_INFO        Get the query field list after performing user group checks.
/CRYSTAL/QUERY_CALL_BATCH      Call queries in batch mode
/CRYSTAL/RECEIVE_INFOSET_DATA Crystal info set and query batch retrieval prototype
/CRYSTAL/RECEIVE_INFOSET_DONE Signal end of data to InfoSet driver
/CRYSTAL/RECEIVE_INFOSET_MDATA Crystal info set and query batch retrieval prototype
/CRYSTAL/UPDATE_LOCATION       Update Crystal Enterprise report datasource location
/CRYSTAL/ODS_REPORT            Business Objects' ODS reporting
/CRYSTAL/GET_ODS_FIELD_INFO    Retrieve field (InfoObject) information for ODS object
/CRYSTAL/ODS_EXECUTE_QUERY     Execute ODS query
/CRYSTAL/SECURITY              Crystal Decisions security functions
/CRYSTAL/GET_USER_LIST         Retrieve filtered list of users belonging to given roles
As you can see there is not any MDX_GET_STREAM_INFO function!!!!
Iu2019m using SAP ECC60 + Crystal Reports 2008 CR Developer Version 12.0.0.683 + SAP Integration Kit.
Can you please be so kind to tell me what Iu2019m doing wrong?! Did I miss something?!
Waiting for your feedback.
Kind Regards
Armando Santos

Hi Ingo.
Iu2019ve already used tcode se37 to search for the above mentioned function and it doesnu2019t exist, the only functions that were installed on the system with ABAP Transports are (/CRYSTAL*):
/CRYSTAL/FLAT Business Objects' InfoSet reporting
/CRYSTAL/BUILD_STRING Convert mbcs itab to utf-8 string
/CRYSTAL/CALL_QUERY Execute query in dialog mode
/CRYSTAL/CALL_QUERY_BTC_STREAM Call queries in batch mode
/CRYSTAL/GET_BATCH_INFO Get batch system info
/CRYSTAL/GET_FUNCAREA_CATALOG Get restricted list of Info Sets
/CRYSTAL/GET_FUNCAREA_INFO Get Info Set meta data
/CRYSTAL/GET_LOGON_LANGUAGE Retrieve the logon language for the current session
/CRYSTAL/GET_QUERY_CATALOG Get the restricted list of queries
/CRYSTAL/GET_QUERY_INFO Get the query field list after performing user group checks.
/CRYSTAL/QUERY_CALL_BATCH Call queries in batch mode
/CRYSTAL/RECEIVE_INFOSET_DATA Crystal info set and query batch retrieval prototype
/CRYSTAL/RECEIVE_INFOSET_DONE Signal end of data to InfoSet driver
/CRYSTAL/RECEIVE_INFOSET_MDATA Crystal info set and query batch retrieval prototype
/CRYSTAL/UPDATE_LOCATION Update Crystal Enterprise report datasource location
/CRYSTAL/ODS_REPORT Business Objects' ODS reporting
/CRYSTAL/GET_ODS_FIELD_INFO Retrieve field (InfoObject) information for ODS object
/CRYSTAL/ODS_EXECUTE_QUERY Execute ODS query
/CRYSTAL/SECURITY Crystal Decisions security functions
/CRYSTAL/GET_USER_LIST Retrieve filtered list of users belonging to given roles
As you can see there is not any MDX_GET_STREAM_INFO function!!!!
Regarding to "If not I would suggest yo try to reimport the Crystal Reports BW MDX connectivity transports" --> I've also repeated this step (Unicode files: * MDX Query Connectivity transport (K900529.r21 and R900529.r21)).
Any suggestion?!
Regards
Armando Santos

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

Error in allocating Despatch number Interval not found Number object J_1IIN

Dear All,
I am facing a problem while doing an excise invoice. System is throwing an error saying that " Error in allocating Despatch number Interval not found Number object J_1IINTPR2.
Can somebody help me with a solution ?
Rgds,
Indrajit Dey

Dear Indrajit
Go to SNUM, input object J_1IINTPR2 and click on Number Ranges. Enter [Excise Group] and click on Intervals (with pencil icon). Maintain the number range and save. Now try the process once again.
thanks
G. Lakshmipathi

Error while invoking bean "finder": Instance not found in datasource

Hi All
I am facing Error while trying to execute a BPEL processing using Notification service for sending out mail .
Following is the Error Stack :
<ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "finder": Instance not found in datasource.
The process domain was unable to fetch the instance with key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" from the datasource.
Please check that the instance key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" refers to a valid instance that has been started and not removed from the process domain.
ORABPEL-02152
Instance not found in datasource.
The process domain was unable to fetch the instance with key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" from the datasource.
Please check that the instance key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" refers to a valid instance that has been started and not removed from the process domain.
     at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:314)
     at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:262)
     at com.collaxa.cube.engine.data.AdminFinder.lookupInstanceByConversationId(AdminFinder.java:235)
     at [b]com.collaxa.cube.ejb.impl.FinderBean.lookupInstanceByConversationId(FinderBean.java:177)
     at IFinderBean_StatelessSessionBeanWrapper42.lookupInstanceByConversationId(IFinderBean_StatelessSessionBeanWrapper42.java:669)
     at com.oracle.bpel.client.Locator.lookupInstance(Locator.java:420)
     at displayInstance.jspService(_displayInstance.java:111)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
     at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:152)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
<2006-09-20 14:55:44,109> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Error in sending e-mail message.
<2006-09-20 14:55:44,119> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Error in sending e-mail message.
The understanding formed till now is that the service is trigged using a stateless session bean wrapper and the lookup for the same is failing.
One option will be to write the java code for performing the lookup using method
lookupInstanceByConversationId(String convId, DomainAuth auth)
but certain information e.g DomainAuth is not available.
I have tried locating information about the dynamic wrapper which is being created.
Any inputs/comments/direction for the above problem are welcomed
Cheers

Thanks Marc.
I checked the domain log (ORA_BPEL_HOME\bpel\domains\default\logs\domain.log) for information. It repeats the same error displayed in the bpel server window.
I have now put some SOPs in my Java embedding activity to see if the process gets instantiated or not. On the BPEL server window, I am able to see these SOPs upto the point where I invoke a method invocation on my remote Java class. Which clearly means the BPEL process is instantiated, contrary to the information in the error (that the BPEL instance cannot be found) I am getting.

HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice. What now?

When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message. What now?

Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L

When starting my computer I get the error message "AppleSyncNotifier.exe Entry point not found. this has only appeared since my last upgrade.

Since recently upgrading to the latest ITunes,on start up I get an error message:
"AppleSyncNotifier.exe Entry point not found .
Procedure entry point xml TextReader Constname could not be located in
the dynamic link library libxml2.dll"
Any body come across this? Any solutions?

Doublechecking, Dad:
I have also reloaded all other iTunes software.
Did you use the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

Connector Error: u2018Function module u201C/CRYSTAL/GET_OSQL_OBJECT_LISTu201D not found

Similar Messages

Maybe you are looking for