Connects to router but cannot send or receive data

I have a WRT54G.  I can find the network and connect to the router, but I cannot send or receive any data.  I tried plugging directly into the router and I am still unable to send or receive any data. Both computers on the router has the same problem.  I did a reset of the router back to default settings and still no luck.  Any thoughts?  Thanks in advance for the help.
Solved!
Go to Solution.

First thing which you can try is, when you Modem and Router is connected to each other, Unplug the Power from Router and Modem , wait for 30 seconds then plug the Power to the Modem and once all the lights are solid then plug the power to the Linksys Router, now check if you are able to go Online. If still not then ....
Who is your ISP. So i think you need to Re-configure all the settings on your router back again.
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Similar Messages

  • Installed Facetime on MacOSX10.6.8 but cannot send or receive calls?

    Installed Facetime on MacOSX10.6.8 but cannot send or receive calls?

    Hello, Tinapepina.
    Thank you for the question.  This article will help you troubleshoot the issue you are experiencing with FaceTime on your iMac. 
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    Cheers,
    Jason H. 

  • I can connect to 3G, but cannot send messages or call with my iphone 4.

    I can connect to 3G, but cannot send messages or call with my iphone 4.

    SMS and calls are carrier features.  Check with your carrier

  • Connected to router but cannot get on the internet

    Hi,
    I have connected my sons laptop to home hub 3 and it is showing connected to router but when we try to connect toonternet we get error message,have tried connecting to lots of different web pages without any joy.
    Laptop will connectto other wireless when we are not at home. Really not sure where we are going wrong.
    Can anyone help?
    Thanks

    Couple of things to check:
    1) Are you using the wireless passkey that is on the Homehub label to log on with?
    2) It could be that your computer has IPv6 selected. Try disconnecting it as follows:
    Select Start
    In the search field type.ncpa.cpl and press enter.
    In the new window right click on your wireless network connection and select properties
    In “This connection uses the following items” section remove the tick beside Internet Protocol Version 6 (TCP/IPv6) then press OK
    Left click on Internet Protocol IPv4, click properties . Check the options to obtain IP addres and DNS server address automatically.
    Once done try and connect to internet.

  • TS2755 i put a new sim from vodaphone into my iphone but cannot send or receive photos with my texts, any help

    i put a new vodaphone sim into an iphone and all is great except i cannot send or receive photos with my texts

    Have you tried contacting Vodafone to make sure MMS messaging is enabled on your account?

  • I have 4 bars on my phone in the house but cannot send or receive texts.

    The last few days I've had trouble sending and receiving texts even though I have between 3 and 4 bars. I have also just tried logging into my account and it told me it didn't recognise my email (it hasn't changed for years) so I go to register and it tells me there is already an account. 

    Hi 
    What type of device are you using?
    Also are you connected to Wi-Fi at the time?
    If you click the Forgotten Details link on My Account and follow the steps. If this doesn't work you would need to Contact Us so customer services can reset your My Account.
    Thanks. 

  • Connect to router but cannot connect to the internet

    i set up a wireless network from my desktop, the desktop works great connects to the internet and is the pc that the router is on..i have a laptop and search the wireless networks..i find the one i made and connect to it, my laptop says im connected but when i click internet explorer it says cannot find server what gives? what could be the problem any help would be sweet

    Hi, When you right click (mouse) the Wireless Network Connection, you can see "Repair". Select that one, and see what will happen. In "Status", Select Support, you should see your IP Address: 168.168.1.X, something like that, and that mean your PC obtains the IP from the router. .... Have fun !!

  • On ipad facetime works fine but cannot send or receive text messages

    how do i get my text messageing to work on ipad

    Depends on exqaactly what "doesn't work" means. Can you describe what happens when you try?
    Also, you are aware that Messages on iPad is for iMessges only? It doesn't do SMS.

  • I have no problem connecting to the Internet but I cannot send or receive email on my iPod

    I can connect to the Internet on my iPod and do all it is supposed to do but cannot send or receive email. This only happened 2 days ago. What might be the problem?

    Could be the Apple servers. Try later.

  • Cannot send or receive mail but connected to the Internet

    I am in a public place using their community wi-fi but cannot send or receive email even though I am connected to the Internet.  I tried using the "Connection Doctor", but that did not help.  Thank you!

    Some Wi-Fi hotspots, especially free ones, block all ports except those used for web browsing. If that's the case, you should be able to check your mail in a web browser, if the account has a web interface.

  • I cannot send nor receive emails. The message I get is that I need to type in my account password which I've done but still unable to send or receive. I get texts fine

    My Iphone 4 is new, and I have been able to send and receive texts, but cannot send nor receive emails. I get the message that I need to input my password for my yahoo account which I've done many times. When I type messagefor outgoing it only allows me to save as a draft. Any ideas?

    Are you positive you're typing the correct password in? You might want to try and reset your password, and try again.  You'll get texts because it isn't connected to your email account. 

  • Lumia 520 Cannot send or receive pictures

    I am able to access the internet but cannot send or receive pictures on my Lumia 520. My phone provider has done a lot of work on this and is sure the phone settings are correct and it is not a network probem. The phone has the current update. Any ideas?
    Solved!
    Go to Solution.

    Hi, Aka123. Were you able to solve the MMS issue with your Lumia 520? If so, we'd appreciate you sharing how you fixed it. If no, check this link: Nokia Lumia 520 - Troubleshooter and try the workarounds listed. Are you also having issues with your SMS, voicemail, and calls? To verify, your phone has the official Lumia Cyan update, correct? To confirm, you should see 'Lumia Cyan' under Settings> extras+info. We look forward to your reply and welcome to our communtiy, BTW. 

  • Iphone 4 cannot send or receive text message

    I just got my iphone 4 yeaterday. Everything works fine except for the text messages. I can make and receive call, but cannot send or receive text messages. Does anyone have this problam?
    After I hit "send", it sounds message sent successfully, but my friend did not get it. Also I asked my friend to send one to me, nothing!

    it's a software issue... a lot of customers are having all kinds of issues with their new iPhone 4. But, don't be dismayed, there may be a way to fix it.
    some ideas is trying going to settings -> general -> rest -> then tap on "Rest Network Settings". This will then rest all the of network settings, and hopefully fix transmitting and recieving issues that you may have with your iPhone.

  • Cannot send or receive mms messages iphone 3gs

    I have an iPhone 3GS running iOS 6.1.6 the phone is locked to AT&T. I use a Straight Talk SIM and have, voice, data, and Text but cannot send or receive MMS. I have gone through the APN update for Straight talk and even talked to spoke with a tech support rep. He said that he adjusted the APN settings for my SIM card and still not able to send.

    SMS/MMS are carrier features so take it out with them.
    We cannot help here.

  • TS2755 I cannot send or receive text messages to my family which all are connected to my bill.  I was able to at first, but now it has stopped working.

    I cannot send or receive text messages to my family which are all connected to my bill.  We were are able to text and recieve before but now it has stopped working.  We are able to text and recieve from other people outside our billing group.  Please help.

    Each of you needs a unique Apple ID for messaging, Facetime & iCloud.
    Go to appleid.apple.com to create new Apple IDs.
    Also:
    How to change the Apple ID on my iOS Device
    Settings > iTunes & App stores.
    Tap your AppleID, sign out then sign back in with new AppleID.
    Settings > Facetime.
    Tap your AppleID, sign out then sign back in with new AppleID.
    Settings > Messages.
    Turn off iMessages then turn it back on with new AppleID.
    Settings > iCloud.
    Delete the account then turn it back on with new AppleID.

Maybe you are looking for

  • BODS 3.1 : SAP R/3 data extraction -What is the difference in 2 dataflows?

    Hi. Can anyone advise as to what is the difference  in using the data extraction flow for extracting Data from SAP R/3 ? 1)DF1 >> SAPR/3 (R3/Table -query transformation-dat file) >>query transformation >> target This ABAP flow generates a ABAP progra

  • Ship to party  name (despcription) change in Sales order

    The requirement is as follow: After entering the Sold to party in a sales order, user enters the Ship to party code and would like change the name (description) of the ship to party as he likes in sales order. But without maintaining / modifying chan

  • Spool to pdf conversion

    Hi All I have created a pdf through spool, and the list is having output in ALV. The columns in ALV are 11 where as I am getting only 9 columns in pdf attachment. Can anyone suggest any solution to get all the 11 columns in pdf attachment. Thanks in

  • Where the create or replace packagebody will  be stored?

    Friends, can anybody clear this doubt pls?... writing create or replace packagebody in the sql*plus will be stored in the database. but if i write the same create or replace packagebody in the forms where it will be stored? will it store in the datab

  • Uninstall 10.4.8 nightmare = how-to

    I am tired of 10% max of my Apple software working after 10.4.8 joke on my Mac mini espc. Front Row. Solution = Redneck Apple fix = Search your hd of your apple for 10.4.8 , you are looking for a file in " hd-library-receipts " as this folder holds a