Connects with 460.8 Kbps in both 2G and 3G in Noki...
Hi,
I am using Nokia 500 and the problem is – whenever I connect to the internet by using 2G or 3G it gets connected with 460.8 Kbps always. I am able to browse and download files in good speed when I connect it via 3G but just wanted to know that, can it affect internet speed when I am on 3G?
I get around 100-500 KB/sec. speed when I use internet in just my phone. But when I use it in PC I get around 50-150 KB/sec. using Internet Download Manager software. So, is it because of the speed shown when I connected it?
So, please help me in the following problem. Thanks!
Solved!
Go to Solution.
Yeah, it automatically increases its link speed with the increase in the internet speed. See the image for more info.
Attachments:
aa.png 83 KB
Similar Messages
-
I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates. There are several applications available that remove duplicates, but I am not sure which ones work or don't work. I want information on this, but most importantly I want to understand how to fix this problem permanently. Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates. I don't have Lion, but I would be willing to get it, if this would fix the problem.
Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
Message was edited by: mfduran -
The picture ID on my outgoing Mac mail is not mine -- it's the photo of boyfriend of my mother in law is appearing as my ID photo. I have no link or connection with anybody or other accounts whatsoever, and I don't have ANY third-party networks myself. HELP!!!
Nobody but you sees that photo, it does not appear on outgoing emails.
To remove the picture rather than change it, open Address Book and select your personal card, then from the menubar select Card > Clear Custom Image. Now the system will use Apple’s generic user picture in the login window and System Preferences’ Accounts pane. Mail and Address Book will remain blank until you designate a new picture in Address Book or System Preferences > Accounts. -
My mac seems to have a virus thats connected with a few apps i use and i can't use them without my computer glitching out even though i've reinstalled the apps a few times. It's very frusterating especially when i'm doing someting when my computer randomly freezes or justs logs out for no reason when i'm using the apps.
Matthew,
if you boot your MacBook Pro in Safe mode, do those apps still behave in the same way? -
Weird issues with file share using both SMB and AFP?
I use my Xserve with 10.4 server primarily as a file server (with a huge RAID array attached via Ultra320 SCSI). I've served files from this server over SMB ("Windows" sharing) to both PCs and Macs for a few years now with no big issues. The files are being shared in a collaborative environment with extensive user accounts and ACLs set up.
I would like to turn on AFP for these same file shares, so those accessing with a Mac can have the added benefits of AFP over SMB. However, I've heard some rumors of some complicated issues developing from the use of both AFP and SMB together on the same folders, in a mixed environment.
The rumors I've heard are things that would happen rarely but enough for it to be significant. For example, a file created over SMB and then edited over AFP would have some problems being re-edited over SMB again, due to some complicated feature that the rumor is unable to explain (something with a resource fork or file locking?). Maybe something weird that just involves the Adobe Creative Suite?
Anyway, I figured I'd throw this out there. Anyone who serves files over both protocols to a varied set of computers and applications having weird issues? Or is everything working for you? Thanks in advance.
Message was edited by: dtempThanks for the responses!
re:crop
It's coming in as cropped with no way to fix it that I can see.
Pressing space or opening in preview shows the full image but if it gets anywhere near Photoshop it comes in auto-cropped.
I'm starting to this it's a bug and will be reporting it to Adobe. -
Connected with WIFI. Can't receive and send emails
When I was in India I had internet with the service provider and I could check my emails without problems. Now that I'm back home, I don't have a internet connection with the service provider. Instead, I'm connected through a WIFI network (at my place). I can use internet on my browser without any problem, but can't receive my emails.
What can I do?
Thank you
Best,
fI tried to avoid much jargon, but you seem to have understood it correctly. It is really not "strange" at all IMHO, it is just very different from how other devices work. To provide email in the special way that BBs do (it's not ActiveSync), the carriers and BlackBerry must host servers and such on their side...to use those requires subscription to (and payment for) an adequate data plan so as to help them cover those extra costs that exist solely for BB users.
Of course, if your email service provides a WebMail interface, you of course should be able to use that via the Browser. It's just the native method of handling email via the Messages app that requires the data plan (since that uses the servers hosted by the carriers and BlackBerry).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Cannot stablish a Database NEW connection with SQL Server Express 2008 R2 and Netbeans 8
Hi I appreciate it if someone could help to this case: I AM TRYING TO MAKE A CONNECTION TO MY SQL SERVER EXPRESS 2008 WITH MY NETBEANS 8 And I get ERROR ... APPARENTLY IS MY USER AND KEY BUT I AM PUTTING THE CORRECT USER AND KEY IN WHICH I CONNECT WITH MY
SQL SERVER EXPRESS 2008. I HAVE PUT IN PORT THE 1433 TCP / IP PORT. THE HOST, THE NAME OF MY DATABASE.
NO PASSING OR ERROR WHICH CAN BE ...Hi DianaWeb,
It's glad to hear that your problem is resolved by changing the windows authentication into mixed authentication and use 'sa' user, namely an SQL Server authentication.
I believe the user name and password in the Netbean are for SQL Server Authentication to connect to SQL Server. The windows authentication you typed is not a valid SQL Server Authentication, that was why the connection failed.
In any case, if you want your J2EE project connects to SQL Server using Windows authentication(credentials of the user running Tomcat/Jboss where your application is deployed). Just build your JDBC URL like this:
jdbc:sqlserver://localhost;integratedSecurity=true;
See
Can I connect to SQL Server using Windows Authentication from Java EE webapp?
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support -
Help with a PCR using both 401KL and 401KS
Hi,
Has anyone set up a supplemental savings plan that begins deductions when 401k limits hit either 401KL or 401KS? I have it setup using 401KS and it works great but unfortunately that scenario is only for one employee out of 48. I really need to be able to compare against both 401KS and 401KL to fully automate this. I'm new to PCR's so any advice would be greatly appreciated...
Thank you,
StephanieI'm sorry. Here is the query:
--Declare @EMail_Address nvarchar(100) = null
Select SVAssociationID.R_ShortValue as MATRIX_AssociationID, Matrix_Modified_DT as Matrix_LastModified
,RTRIM (MLS_ID) As Matrix_MLS_ID
, ISNULL(EMail_Address, '') AS MATRIX_member_Email
,RTRIM (EMail_Address) as Matrix_Member_EMail
--,RTRIM( LTRIM( ISNULL (@EMail_Address, '') ) ) as Matrix_Member_EMail
,Last_Name AS MATRIX_LastName, Nickname AS MATRIX_NickName
FROM dbo.Agent_Roster_VIEW a
LEFT JOIN dbo.select_values_VIEW SV ON a.Status_SEARCH = SV.ID
LEFT JOIN dbo.select_values_VIEW BillType ON a.Bill_Type_Code_SEARCH = BillType.ID
LEFT JOIN dbo.select_values_VIEW SVAssociationID ON A.Primary_Association_SEARCH = SVAssociationID.ID
WHERE Status_SEARCH IN (66,68)
Order by MLS_ID
Results:
MATRIX_AssociationID
Matrix_LastModified
Matrix_MLS_ID
MATRIX_member_Email
Matrix_Member_EMail
MATRIX_LastName
MATRIX_NickName
STC
09/02/14
CCWILLI
[email protected]
[email protected]
Williams
Christine
STC
09/12/14
CCWORSL
[email protected]
[email protected]
Worsley
Charlie
STC
09/02/14
CCYROBIN
NULL
Robinson
ECBR
09/02/14
CDABLACK
[email protected]
[email protected]
Black
Dale
STC
09/02/14
CDABRADY
[email protected]
[email protected]
Brady
David
Thank you, -
#2 has many years of bookmarks and profiles, #1 is only 3 months old. I would like them both to run the same add-ons and have same profiles. How can I integrate the old to the new and the new to the old? Both are up and running fine. I got the KVM because one has MS Office 7, but couldn't afford to put it on the other one. They also both connect wirelessly to the router which is in the next room (my brother's as he's a gamer and needs a faster connection), so they aren't set up as a regular network although I log on with a password. I'd like to be able to put the entire profile once integrated on a flash drive. Thanks.
Firefox '''Sync''' can synchronize your Profiles. <br />
https://support.mozilla.com/en-US/kb/what-firefox-sync -
I've tried checking for updates (none necessary), running v 9.1.5
Everytime I open it and connect a camera I have to force quit because it stops responding and won't upload.
It's uploaded from both these cameras before with no problem.
How can I fix this?As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
I have deleted time machine preferences...restarted the modem a bunch of times, restored time capsule to it's original settings...after I first set it up in Airport Ulitity its shows a page quickly that states there is a internet problem, but the page quickly goes away before I can read what it says exaclty and states the internet connection problem is resolved...
However it's not resolved, I'm also having trouble doing a back up to my time capsule...I recently purchased a new macbook and retrieved/restore what was on the time capsule to the new computer...that worked fine...wireless worked fine...however when I tried to back up the new macbook...it would faii stating that there isn't enough room on the TC to do a back up...
I didn't end up keeping the new macbook, I was just using it/trying it out while my current macbook pro was being repaired (logic board)
Ever since I got my current macbook back from repair...my backups have failed due to their not being enough space to perform the back up...in the past the back ups would happen and old back ups would be replaced...
I think this has to do with my current computer having a new name after the repair..."Adam's macbook pro 2" vs "Adam's macbook pro"
The internet was working fine wirelessly through the TC a day ago, but it wasn't allowing my other laptop that was connected via ethernet access to the internet...I had a self assigned IP address error then...I don't have that problem now, but it's not transmitting internet at all...even though it's in a solid green state.
I have no problem completely wiping out my TC including the previous back ups on it...just don't know how to go about it...I have restored it to factory settings a bunch of times and created the network from scratch...just hasn't fixed the issue
Is there more prefences files I should deleteIf the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
Bin fitting with a counter using both analytics and model clause.
11.2.0.3
This falls under 'just want to figure out how to do it'. Its not critical for work. I want to try to see if its possible to do this with both analytic function and with a model clause. Just to see if its possible. It has been stumping me.
I got the idea to look at this from this article about bin fitting. I have been playing with the model clause and I think you would do something with the 'increment' clause, but I dont see a way to reset it to 1 at a certain point.
http://www.oracle.com/technetwork/issue-archive/2012/12-mar/o22asktom-1518271.html
The case I want to look at is, bin fitting based on a counter and a partition by. In theory this should be simpler than the example in the link.
[code]
create table myrooms (
room_number number,
person_id number);
create unique index myrooms_ind on myrooms(room_number,person_id);
[/code]
Person_id is not unique. So row_number is more appropriate than rank or dense_rank.
Problem: Partition by room_number, assign up to 50 people to a specific group with in the same room. This seems like it could be handled with a row_number() and a window clause, but that is not supported.
I need to basically translate the old procedural counter into sql:
pseudo-code that does not compile that would have a reason to use this logic.
[code]
declare
cursor curGetRoom
select room_number,person_id
from my rooms
order by room_number;
counter number := 1;
vCurrentRoom myroom.room_number%type;
begin
for i in curGetRoom loop
if vCurrentRoom is null then
vCurrentRoom := i.room_number;
elsif vCurrentRoom = i.room_number then
if counter < 51 then counter :=counter+1;
else counter := 1;
else
vCurrentRoom := i.room_number;
counter :=1;
end if;
end;
[/code]
simple partition query., but I dont see a way to limit this to 50 and then start over. Window functions are not supported with row_number()
[code]
select room_number,person_id,row_number() over (partition by room_number order by person_id) rn
from myrooms
[/code]11.2.0.3
This falls under 'just want to figure out how to do it'. Its not critical for work. I want to try to see if its possible to do this with both analytic function and with a model clause. Just to see if its possible. It has been stumping me.
I got the idea to look at this from this article about bin fitting. I have been playing with the model clause and I think you would do something with the 'increment' clause, but I dont see a way to reset it to 1 at a certain point.
http://www.oracle.com/technetwork/issue-archive/2012/12-mar/o22asktom-1518271.html
The case I want to look at is, bin fitting based on a counter and a partition by. In theory this should be simpler than the example in the link.
[code]
create table myrooms (
room_number number,
person_id number);
create unique index myrooms_ind on myrooms(room_number,person_id);
[/code]
Person_id is not unique. So row_number is more appropriate than rank or dense_rank.
Problem: Partition by room_number, assign up to 50 people to a specific group with in the same room. This seems like it could be handled with a row_number() and a window clause, but that is not supported.
I need to basically translate the old procedural counter into sql:
pseudo-code that does not compile that would have a reason to use this logic.
[code]
declare
cursor curGetRoom
select room_number,person_id
from my rooms
order by room_number;
counter number := 1;
vCurrentRoom myroom.room_number%type;
begin
for i in curGetRoom loop
if vCurrentRoom is null then
vCurrentRoom := i.room_number;
elsif vCurrentRoom = i.room_number then
if counter < 51 then counter :=counter+1;
else counter := 1;
else
vCurrentRoom := i.room_number;
counter :=1;
end if;
end;
[/code]
simple partition query., but I dont see a way to limit this to 50 and then start over. Window functions are not supported with row_number()
[code]
select room_number,person_id,row_number() over (partition by room_number order by person_id) rn
from myrooms
[/code] -
Hi so my phone seems to not be connecting to any computer on i tunes. When i plug it into my macbook pro it charges but will not connect to i tunes. I tried another i phone 5s and it did connect to the computer so its definetly my phone that has a problem, Are there any settings or anything that i can change so my i phone will connect to Itunes so i can sync.
Ps: this has never happened before and ive synced my phone plenty of times on this computerHi elliezzz,
If you are having issues with your iPhone not being recognized by iTunes, you may find the following article helpful:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
- Brenden -
Photos showing up with no dates in both iphoto and aperture?
Why has my photos of 60,000 plus have many of the photos with no dates on the library view in iphoto or aperture? This causes my whole library to be out of order. How do I go about getting those dates back so I can see them in events and search by date. Some of the photos have dates and some just have a string of numbers associated with it. Please help
Can you please show a sample of the wrong dates - both for Aperture and iPhoto?
What is your Aperture version and your iPhoto version exactly?
What did you do, before this problem started? Have you tried already some trouble shooting, like repairing the Aperture library ? Aperture 3: Troubleshooting Basics http://support.apple.com/kb/HT3805
Regards
Léonie -
Question on 4510E+R with Sup7E, redundant sups, both IOS and ROMMON upgrade
I found the procedure for a non-disruptive IOS upgrade for a dual-Sup7E 4510E+R using the...
redundancy reload peer
redundancy force-switchover
.....commands to maintain switch availability during IOS upgrades.
Can I use the same procedure for a ROMMON upgrade? I will not have console access and must do it remotely.
This is what I have:
Current ROM: 15.0(1r)SG5
Current IOS: bootflash:cat4500e-universalk9.SPA.03.03.02.SG.151-1.SG2.bin
This is where I want to go:
New ROMMON: cat4500-e-ios-promupgrade-150-1r-SG11
New IOS: cat4500e-universalk9.SPA.03.04.05.SG.151-2.SG5.bin
config-register is currently 0x2102
Current bootvar:
boot system flash bootflash:cat4500e-universalk9.SPA.03.03.02.SG.151-1.SG2.bin
Questions:
1) Can I upgrade the ROMMON first, then IOS?
2) If #1 is true, is there any problems with a temporary scenario where each Sup is running a different ROMMON version?
Proposed proceedure:
3a) Upgrade ROMMON on standby Sup
3b) switchover to make the standby active
3c) Upgrade ROMMON on the original active Sup
3d) Upgrade IOS on the original active Sup
3e) switchover to make the original Sup active
3f) Upgrade IOS on the original standby Sup.
Thanks for any feedback.Hi Eric,
There are 2 ways to upgrade:
1-Load the IOS version you want to both Sups, change the boot variable, so the switch can load the new IOS after the reboot and finally reboot the chassis.
2-Use ISSU see link:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/prod_white_paper0900aecd806f0663.html
As for the ROMMON, you usually don't need to upgrade it often and you can always do that later if you need to. I think, some of the newer versions of IOS upgrade the ROMOM as well as the main image but I am not sure exactly for what platforms.
HTH
Maybe you are looking for
-
hi I would like to export table "A" containing data in BLOB column and then import the same table into another user's table "B". i got the following error ORA-06502PL/SQL: numeric or value error
-
My dumb question. I have been synching iphone and ipad to imac. I want to start syncing those devices to my mac book as I use that primarily and the imac seldom. I do use Time machine and have backups but was concerned I might create a pro
-
I got the dreaded "Invalid Node Structure" Error
Hi All, I entered the Mac world recently with a spanking new Macbook Pro 15". Updated it online to the latest OS 10.6.4 Snow Leopard. Today I was trying to install some more free application from the Official Mac Software Site. After installing a cou
-
Problem with NLS_LANGUAGE
I am working on workflow process. I have a problem . I created a workflow process using the Oracle Worflow Builder. When I try to save it at server I cann't do that because I get the following Error Message : 220: Unable to set NLS_LANGUAGE. 210: Ora
-
How to setup my computer to run JSP and Servlets
I want to setup my computer to run JSP and Servlets. What kind of Servers and other tool i need to install to run JSP and Servlets. Plz, Help me to start my work on JSP. Regards, Usman Ali