Connexion problems! Help required!
Hi everyone. (first don't blame me if I'm speaking bad : I'm french) So here's my problem : about one year ago I tried to create myself an Itunes Store account, they asked me for my bank details, I had'em but it didn't work. So I gave up. Today I really need this account so I give it a new try and this is what happens : a message appears telling me that my account hasn't been used yet so they propose me to check or to cancel, I click on 'check', a loading bar appears, and then... nothing. Loading bar disappears and no more message is appearing. I have no indication at all. This is kind of annoying. ONE time I had a error message with a number on it and I click 'ok' before marking it down so I cannot check on the error messages database. So here I am and I can't create a new account cause my email adress is already used. Guess I'll have some useful hints. Thanks a lot!
Try to reinstall the firmware through NSU but it will reduce the freezing issue wont wipe out it completely. I am also facing the similar problem on N86 which I bought in Mumbai, India on 11th July. I have reinstalled the firmware which is 10.086 as only this is available in India on NSU. And my freezing problem reduced a lot. But still not completely gone. I am gonna ask for replacement from the distributor for my N86.
Please click on Kudos at upper right corner, If you think my post is helpful to you.
Similar Messages
-
Db link problem help required??
hello friends,
error occuredjava.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Could not update; currently locked by user 'admin' on machine 'mysystem-9ZT4OE'.
i get this error for using preparedstatement call.so i set the permission for the same in my system for my user account.after doin so i get the same error.
i implemented this in servlet program.
plz help reg. this issue
thank youHi Victor,
the problem is not the db-link. If you execute the statment "select * from table@dblinkname;" in an pl/sql program you get this error too. The user has not the select privelege maybe only a role. Please grant the select priveleg directly to the user.
Regards,
Bert. -
Mutating table problem help required
Hi. I am rather hoping someone will be able to help me with this problem.
I have two tables, sa and mv. Create script below:
create table mv (
moduleId Char(2) CONSTRAINT ck_moduleId CHECK(moduleId in ('M1', 'M2', 'M3', 'M4', 'M5', 'M6', 'M7', 'M8')),
credits Number(2) CONSTRAINT ck_credits CHECK(credits in (10, 20, 40)),
constraint pk_mv primary key(moduleId)
create table sa (
stuId Char(2) CONSTRAINT ck_stuId CHECK(stuId in ('S1', 'S2', 'S3', 'S4', 'S5')),
moduleId Char(2),
constraint pk_sa primary key(stuId, moduleId),
constraint fk_moduleid foreign key(moduleId) references mv(moduleId)
And the scripts below is to insert data into both:
insert into mv VALUES('M1', 20)
insert into mv VALUES('M2', 20)
insert into mv VALUES('M3', 20)
insert into mv VALUES('M4', 20)
insert into mv VALUES('M5', 40)
insert into mv VALUES('M6', 10)
insert into mv VALUES('M7', 10)
insert into mv VALUES('M8', 20)
insert into sa VALUES('S1', 'M1')
insert into sa VALUES('S1', 'M2')
insert into sa VALUES('S1', 'M3')
insert into sa VALUES('S2', 'M2')
insert into sa VALUES('S2', 'M4')
insert into sa VALUES('S2', 'M5')
insert into sa VALUES('S3', 'M1')
insert into sa VALUES('S3', 'M6')
Now for the actual problems.
Firstly I need to try and overcome the mutating table problem by ensure that stuid = S1 in table sa can not take both moduleId M5 and M6.
Just one or the other. I have created a single trigger, but if fails because of the mutating table problem.
The second problem I need to overcome is that none of the stuids can have moduleIds where total credit value of more than 120 credits. Credit value is stored in the mv table.
Many thanks in advance for any assistance.Use a statement level trigger:
Firstly I need to try and overcome the mutating table problem by ensure that stuid = S1 in table sa can not take both moduleId M5 and M6.
SQL> create or replace trigger sa_trg
2 after insert or update on sa
3 declare
4 c number;
5 begin
6 select count(distinct moduleId) into c
7 from sa
8 where stuid = 'S1'
9 and moduleId in ('M5','M6');
10 if c > 1 then
11 raise_application_error(-20001,'S1 on both M5 and M6!!');
12 end if;
13 end;
14 /
Trigger created.
SQL> select * from sa;
ST MO
S1 M1
S1 M2
S1 M3
S2 M2
S2 M4
S2 M5
S3 M1
S3 M6
8 rows selected.
SQL> insert into sa values ('S1','M5');
1 row created.
SQL> insert into sa values ('S1','M6');
insert into sa values ('S1','M6')
ERROR at line 1:
ORA-20001: S1 on both M5 and M6!!
ORA-06512: at "SCOTT.SA_TRG", line 9
ORA-04088: error during execution of trigger 'SCOTT.SA_TRG'
The second problem I need to overcome is that none of the stuids can have moduleIds where total credit value of more than 120 credits. Credit value is stored in the mv table
SQL> create or replace trigger sa_trg
2 after insert or update on sa
3 declare
4 c number;
5 begin
6 select count(distinct moduleId) into c
7 from sa
8 where stuid = 'S1'
9 and moduleId in ('M5','M6');
10 if c > 1 then
11 raise_application_error(-20001,'S1 on both M5 and M6!!');
12 end if;
13
14 select count(*) into c from (
15 select stuid
16 from mv, sa
17 where sa.moduleid=mv.moduleid
18 group by stuid
19 having sum(credits)>120);
20
21 if c > 0 then
22 raise_application_error(-20002,'A student cannot have more than 120 credits!!');
23 end if;
24
25 end;
26 /
Trigger created.
SQL> select stuid, sum(credits)
2 from mv, sa
3 where sa.moduleid=mv.moduleid
4 group by stuid;
ST SUM(CREDITS)
S3 30
S2 80
S1 100
SQL> insert into sa
2 values ('S1','M4');
1 row created.
SQL> select stuid, sum(credits)
2 from mv, sa
3 where sa.moduleid=mv.moduleid
4 group by stuid;
ST SUM(CREDITS)
S3 30
S2 80
S1 120
SQL> insert into sa
2 values ('S1','M7');
insert into sa
ERROR at line 1:
ORA-20002: A student cannot have more than 120 credits!!
ORA-06512: at "SCOTT.SA_TRG", line 20
ORA-04088: error during execution of trigger 'SCOTT.SA_TRG'Max
http://oracleitalia.wordpress.com -
N86 8GB -persistent problems -help required
I bought N86 yesterday.this phone hangs/freezes at almost anytime--while setting time, while typing the name of new contact, while renaming a music file,while using maps zoom in and zoom out,camera refuses open for hours together,opening the slide just befor typing something.I don't understand --DOES NOKIA EVER CHECK THE STABILITY OF ITS MODELS BEFORE RELEASING??????????. My old grandpa of nseries -N90 even to this date woks great wiithout a hitch!!!!!!!!!!!!!!!!!!!!!!. Hope does look into this!!!!!!!!!!!!!
Try to reinstall the firmware through NSU but it will reduce the freezing issue wont wipe out it completely. I am also facing the similar problem on N86 which I bought in Mumbai, India on 11th July. I have reinstalled the firmware which is 10.086 as only this is available in India on NSU. And my freezing problem reduced a lot. But still not completely gone. I am gonna ask for replacement from the distributor for my N86.
Please click on Kudos at upper right corner, If you think my post is helpful to you. -
Oracle 8i us7ascii character set problem - help required urgent.
Hi frnds,
I have a oracle 8i database server installed on sun solaris os. The database character set is us7ascii. In one of the tables TIFF images are stored in a long column. I m trying to fetch these images using oracle 9i client and visual basic(oracle ODBC drivers). But i m unable to do so. I can not fetch special characters.
Is it because of the character set problem? but when i run my code on the server itself, i m able to fetch the images. I tried to fetch the images using oracle 8 i client on windows XP machine but could not do so. Are there any special settings that i have to do on the client side?Indeed, it's an ODBC issue. Read this statement from Oracle:
From ODBC 8.1.7.2.0 drivers onwards it's NOT possible any more to
"disable" Characterset conversion by specifying for the NLS_LANG
the same characterset as the database characterset. There is now
ALWAYS a check to see if a codepoint is valid for that characterset.
Typically you will encounter problems if you upgrade an environment
that has NO NLS_LANG set on the client (or US7ASCII) and the database
was also US7ASCII. This incorrect setup allowed you to store characters
like èçàé in an US7ASCII database, with the new 8i drivers this is not possible
any more.
Basic problem is the 'wrong' characterset US7ASCII in the database. As long as no characterset conversion happens (that's the case on the unix server), special characters are no problem.
Werner -
Validation problem, HELP required
I have the followig HTML form, I have tried validating the values using Javascript but have had no success.
I am trying to validate the following: "set1ar" "set1aw" "set2ar" "set2aw" "set3ar" "set3aw" "set4ar" "set4aw".
I have to ensure that only integer values >= 0 are entered in these fields, so no negative numbers or text. Can someone please help me out here. My thanks in advance.
<HTML><HEAD><TITLE> Validate </TITLE></HEAD>
<BODY>
<form>
<table>
<tr><td align="center"> <input name = "set1ar" size=3 maxlength=3></td>
<td align="center"> <input name = "set1aw" size=3 maxlength=3> kg</td></tr>
<tr><td align="center"> <input name = "set2ar" size=3 maxlength=3></td>
<td align="center"> <input name = "set2aw" size=3 maxlength=3> kg</td></tr>
<tr><td align="center"> <input name = "set3ar" size=3 maxlength=3></td>
<td align="center"> <input name = "set3aw" size=3 maxlength=3> kg</td></tr>
<tr><td align="center"> <input name = "set4ar" size=3 maxlength=3></td>
<td align="center"> <input name = "set4aw" size=3 maxlength=3> kg</td></tr>
</table>
<input type="submit" value="submit">
</form>
</BODY></HTML>Hi !
You can try the following Javascript function . It will not allow the user to enter any character other than between 0-9 .
function check_key(evt)
var nbr,chr;
var bool=0;
if(window.Event)
nbr=evt.which;
else
nbr=event.keyCode;
if( (nbr>=0 && nbr<=32) || (nbr>=48 && nbr<=57) || (nbr==46) )
bool=1;
if(bool==0)
alert("Invalid Character");
return false;
else
if(bool==1)
return true;
Add the following HTML code .
< input type="text" name="T1" onKeyPress="return check_key(event);">
Also search for better alternatives .
Cheers.
- pranav -
im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.
Try the following user tip:
" ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows -
Search Help with in a serach help required in SRM 4.0
Hi,
Requirement: Search help required for Product Category field in the Search help for Product(BBPH_PRODUCT) in SRM portal.
This search help is used in Create shopping Cart transaction. The hyper link on Internal Goods/Services leads to the search help BBPH_PRODUCT.
My analysis:
The field Product Category (CATEGORY_ID) has search help(COM_CAT_HIER) attached to its data element. When I single test the search help BBPH_PRODUCT in SAP GUI,I can see the search help for field product category in the selection dialogue box. However the same does not appear on the corresponding screen in HTML.
Please let me know whether I need to do some thing to make the search help appear on the HTML screen?
With Regards,
Prakash KamathHi Prakash,
I have the same problem but with another field. Unloading point. Could you please tell me how did you solve this problem with displaying F4 help on html/ SRM portal?
Thank you very much.
Best regards,
Danijela ZIvanovic -
hello,
i have just downloaded oracle 10g softwares ...
i installed database then developer suite ... everything was fine ... until i was unable to run forms ...
a friend of mine told me that i need to install application server in order to run forms ...
1st of all i want to know that is there any way i can run forms without using Oracle AS 10g ...
2ndly i m facing problems in installation of Oracle AS 10g ...
i have studied online documentation but it ain't so helpfull for me ...
it seems like ... i have to install "Oracle AS infrastructure" first and then "Middle-tier: Business Intelligence and forms" ...
i m using P-IV (AMD Athlon XP 2100+, MMX, 1.7GHz Processor) with 512 MB DD RAM and Windows XP Professional with Service Pack 2 as Operating System.
During installation, the installer is warning dat only "Oracle Application Server (J2EE and Web Cache)" and "Oracle Application Server Developer Kits" are supported installations on dis platform ...
what should i do ... urgent help required ...
regards,
yasir ([email protected])@ brusardl and rkogelhe
thanx for replying ...
brusardl
i didn't changed da port while installing Oracle AS ...
inspite i stopped all services using/listening from dat port ...
now ... i guess there has been some conflict ... as database listner stops automatically just after starting !!!
rkogelhe
can u plz tell me what is BI version of Forms ...
and can i view forms running on web without installing Oracle AS with OC4J bundled in Forms ???
Another Problem:
I re-installed Database, Developer suite and then Oracle AS infrastructure ...
everthing went fine ...
when i installed Oracle AS Middle Tier - Business Intelligence & Forms
during installation ... some configuration assistants failed/skipped ...
da OC4J configration assistant at 5th last position failed ... so remaining 4 configuration assistants were skipped ...
at da end it said ... Installation Succesfull but with some configuration assistants failed/skipped ...
is dis a installation useless ... can i fix dis ?
regards,
yasir -
Help required from JDeveloper Development Team.
HI there,
I Download the JDeveloper 10.1.2 (1811) from OTN, But the downloaded archive file is unable to open. I did the download once again but I am facing same problem. I want to JDeveloper 10.1.2 for the installation of BI Beans 10.1.2.
Help required from JDeveloper Development Team
Thanks For Your Time,
Regards,
ViSHAL.Please use an informative Subject line, there is more chance that people will read the post.
All we can suggest is that you try the download again. -
Help required with (soundcard) connection / settings, thanks in advan
Help required with connection / settings between a Creative Sound Blaster Audigy Platinum EX (soundcard) and a Creative DTT3500 Digital (5. speakers).
The problem
No sound from any of the speakers. (Exception can plug in headphones at front)
Background
My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). However after reconnecting speakers and restoring the original settings I?m getting no sound from any of the speakers. I?ve followed all the available advice/instructions I can find on this website and manuals to no avail.
Set-up
Physical
(Digital DIN) Speakers/decoder amplifier (DTT3500) connected to the (digital out) soundcard (Audigy Platinum EX) using minijack to DIN cable. (As per instruction manual)
Software
Creative Audio Consul ? setting as per instructions, however have tried variations in vain. (Note: above tabs there is a select device box with SB Audigy [A0000] in it ? only option. Just wondering what [A0000] means?)
Your advice please. A simple step by step guide would be appreciated, many thanks in advance, Jon"My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). "
Do you have the original installation disk?
If so, try installing THOSE drivers, ESPECIALLY if it worked before. Be sure to uninstall what is there now, first.
Its natural for most people to want the 'latest' drivers for their hardware. However:
After experiencing some difficulties with some CL 'updates' for certain products, I now avoid them UNLESS I am having a PROBLEM with the existing drivers. -
Is there any routine which includes the tax value in R100 as well ,currently the problem is that the 100% Discount condition is only including the net price
And in the pricing procedure i m using two prices one price of tax calculation and the other is consumer price first i calculate the tax from base price then i deduct the tax from the consumer price this calculation is working fine through standard routines.
Only problem is that when i enter NRAB and R100 at end it only includes Net Value which is calculated through Formual using condition type NTPS
Kindly Help Required ASAPHi ABAPAR,
I m not getting the exact picture of what U desired, from your pricing procedure.
As you r using multiple free goods condition type...anyway.
If you wanted to make the calculated tax "amount + "as a basis for the calculation of particular condition type.you can use the functionality of subtotal.
That mean go and assign one subtotal no. to subtotal column in your pricing procedur to all condition type to which you wanted to make as a basis for furthur calculation.(this settings allow the total of all values in one subtotal).
And finally U can assign this subtotal no.to the "alt.cal.B.value "of pricing procedure for the calculation of particular condition type.
If you r using any std condion type that come up with certain routine like NRAB or somthing...possibly that will not allow u to do this settings. so in this case clear your free goods requirement or use any new condition type. i.e . Z creation.
consult your SD consultant.
karnesh -
Hi,
Since the last week I'm facing connexion problem to the Forum.
Error page 404, 502, website unavailable and so on, are very often the page which I get whenever I try to get a page Forum (database general, installation etc.).
This problem exists through a proxy, but still exists without proxy (direct dsl connexion).
Is there any network problem on Oracle ?
Nicolas.All the Oracle sites, OTN, tahiti, etc, I have used over the past couple of days have been available, but the forums have been mostly down.
The unavailability has been almost on a magnitude with the upgrade many years ago, when the forums were totally gone for about a week and came back with the orange read blobs, watches and the permanent email feature. I am not sure but I think that is when powered by Jive software also appeared at the bottom.
Having taken a look at their site it appears they have taken a very simple concept, web forum, and over engineered it, while agonizing about whether people might want to change email address at some point. I am not sure powered is the right word to use here, weakened or undermined might be more appropriate.
Of course they make a big deal about it being all Java, which is probably why it was chosen. If Java is not the worst programming language invented, it certainly seems to be responsible for most of the worst applications.
The sad thing is most web forums seem to use PHP and, heaven help us, MySQL and provide a much better, feature rich and solidly reliable experience. -
Java Mail,SMTP server not starting,help required urgently
Hi i have been working on java mail .Yesterday it was working ok but today suddenely i am getting this thing.its not starting the smtp server i guess,just exiting and get the command prompt ..dont know what to do.help required how to go about this error
am pasting the debug information.please check and let me know
the compilation ,smtp server and others are all valid
thanks
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Pavan>cd C:\Program Files\Java\jdk1.5.0_07\bin
C:\Program Files\Java\jdk1.5.0_07\bin>javac jdbcExample3.java
C:\Program Files\Java\jdk1.5.0_07\bin>java jdbcExample3 smtpserver address
DEBUG: JavaMail version 1.4ea
DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
javamail.providers (The system cannot find the file specified)
DEBUG: !anyLoaded
DEBUG: not loading resource: /META-INF/javamail.providers
DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
DEBUG: Tables of loaded providers
DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax
.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsyste
ms, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com
.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLSt
ore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsyst
ems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.su
n.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=jav
ax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc],
com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP
3Store,Sun Microsystems, Inc]}
DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.
sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STOR
E,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Prov
ider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc],
pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems
, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun
Microsystems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.S
MTPTransport,Sun Microsystems, Inc]}
DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
DEBUG: !anyLoaded
DEBUG: not loading resource: /META-INF/javamail.address.map
DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
javamail.address.map (The system cannot find the file specified)
C:\Program Files\Java\jdk1.5.0_07\bin>The debug output doesn't show an obvious problem. You're
going to have to actually debug your program. A debugger
might be helpful. -
Keithley connexion problem with MAX
Hi everybody,
I have a problem finding a Keithley device in LabView Measurement and Automation Explorer (Max, version 4.6).
I have entered all necessary network parameters in windows (ip adress, subnet mask, etc...) and if I ping the Keithley through the windows command box, I get an answer, so no connexion problem. But when I want to add it in Max, automatic detection doesn't work, and if I enter the ip adress manually and validate I get an error message saying that the device cannot be found and containing the Visa error code 0xBFFF0011.
I have also tried to add it with a raw socket using the port number that I find in the Keithley, it still doesn't work... The most puzzling is that I have another PC running under the same OS, with the same version of Max and the same parameters, and it works on this pc!!
Please help me, I'm getting desperate...
Thank you very much!!Hello.
As you say the same instrument works with another computer, have you checked if the firewall configuration is the same on both computers?
Did you try to connect your instrument directly to the computer through a local nertwork?
DO you have the same version of the NI-VISA drivers on both computers?
Best regards -
XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHARHi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
xmlns:ns1="http://XYZ.com/Test">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
/ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat
Maybe you are looking for
-
My phone wont let me turn wifi on
my phone turned wifi off itself and when i try to turn it back on it wont let me. the button remains grey and off
-
How do I authorize my MacBook Pro to add new files to my iTunes library on an external hard drive?
Recently I switched from a PC running Windows XP to a MacBook Pro running OS X 10.5.8. I successfully imported my iTunes library from my external hard drive. The existing files play without a problem, but the computer is preventing me from loading an
-
i can t buy a book, i ve got the message " an error occured uploading your order", i re tried many times in vain
-
Reading file content using Javascript
Hi Friends, is it possibel to read the contents of the child window opened from a javascript.for example am opening a window using Window.open function in javascript, after opening the window can i read the contents ?If so how can anyone help in this
-
Close periods for specific users
All tekkies I want to close a period for the credit controllers,while keeping it open for other FI users. Please help Roy