Connexion with a car sound system
Hello
I have no problems when I plug my Nano on my house sound system.When I try to connect it to my car system (mini jack to mini jack) : The sound is very 'poor' and I don't listen clearly the voice.
What do you think ?
Is it a question of cable, configuration on the Nano or on my car system ?
Thanks in advance for your help !
PC Windows XP Pro
Same here in my Mazda 3. *****!
Similar Messages
-
Is it possible to get Siri to work with 'old' Car handsfree systems?
Is it possible to get Siri to work with 'old' Car handsfree systems?
Unless I'm missing something - Siri doesn't work well with older handsfree car systems - as typically the cars built in system handles the voice control and relays the request to the phone over bluetooth protocols. I tried initiating siri standalone while connected to the car and it failed.
I was hoping I might be able to do some sneaky like 'Call Siri' to enter Siri mode but it doesn't seem to work.
I'm guessing future Car handsfree systems will be Siri aware - but making Siri work with older systems (and my car isn't old - it's a 2011 model) would be very useful.
Has anyone come up with a workaround? I really don't want to have to buy or use a bluetooth ear piece
Thanks
AdamI never heard anything on this and so am still unable to use Siri without touching my phone.
-
My toyota Seinna 2011 refuses to connect with my Iphone 6 as a "portable player". Message says for me to adjust the player. On the phone it is searching for other devices but not connecting. Now same phone is paired with the car multimedia system and will take and make calls. Help!
I very much doubt it if you consider how much data Apple release to App developers
to allow them to create apps that work under iOS
Audi being lazy like most of the other motor manufacturers
They will be registered developers and as such get all the info and data they need -
My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio system?
I am assuming you are using the Lightning to 30 pint adapter and it is not working?
-
Instaling Iphone in car sound system to answer calls
Is it possible to install the iPhone with the sound system of the car, to be able to answer phone calls? Is this complicated?
Yes, it is possible. Like the above poster mentioned, though, it depends on the Bluetooth of your car, and if it's compatible with the iPhone.
I personally have had my iPhone 3G connected via bluetooth with my car, but it was a mediocre experience. Perhaps you will have better results.
As for the complexity of pairing your phone, it depends more on your car's system. Consult your car's user manual for guiding you through the bluetooth pairing process. -
I get only sound from left with 5.1 sound system on Satellite P100
Hi!
I have a P100-347 and a logitech 5.1 sound system.
The logitech 5.1 has 3 connection: 1 to be plugged to the Line-In, the other to be connected to the Line-out and the 3rd to be connected to the Microphone socket.
When using it on my desktop which has a random SIS sound card it works fine.
Yesterday I've connected it to the P100-347 but I only get sound from the Line-out socket. I have changed the sound preferences to 5.1 but it makes no difference... I only get sound from the Line-out. Is there any drivers update that I should do or is anyone aware of this and how can I fix it??
Just one more thing... With the laptop came this cd "Express Media Player Recovery CD", what is this? Is this something to be installed after runing the "Product Recovery CD" in order to install some drivers or whatever is in this cd comes with the Product Recovery CD as well? Does anyone knows?
Thank you.Hi
There is no problem. As you said the notebook supports Line-in; headphone & S/PDIF jack and Microphone jack.
If you want to connect the HiFI or another device you have to choose the headphone & S/PDIF jack. Only this port provides the audio outputting.
The both another jacks provide only the function for signal (sound) receiving!
My notebook provides the same jacks and I have connected the notebook to HiFI (5 speakers) via Y-audio cable like this one:
http://images.belkin.com/F8V235-06/FUL1_F8V235-06.jpg -
Car sound system (tape deck)
I was just wondering if you can get some sort of connection to connect your ipod to your cars sterio system? to be specific it is a tape player, some sort of cord like you could use with a portable cd player, you would have a tape that pluged into the headphone section of the player, does ipod have something similar, or do you have to pull out the head unit and get a new one that is compatable?
You just need a standard cassette tape adapter. Apple sells one, Radio Shack sells them, etc. I use my old one that came with my Sony Carman (portable CD player) and it works fine.
Like this one...
http://tinyurl.com/yj7m25
or...
http://tinyurl.com/282u6o
or...
http://tinyurl.com/2ybe84
You get the idea.
Patrick -
IPhone 3GS and Nissan 2010 Bose Sound System Issue
I have a 2010 Nissan Altima Coupe with a Bose sound system and iPod intergration. Until recently everything worked well with my iPhone 3G S, however now on occasion, the iPod function stops dead in the middle of a book or sound. When I turn the power on an off, the car iPod system is still locked. The other functions of the sound system like regular and sattellite radio work fine. When I disconnent the iPhone there is a "Check Device" message on the car system screen. The only way to unfreeze the system is to turn of the ignition and restart the car. It seemed to start doing this after I installed the iPhone iOS4 upgrade last month. Anyone else seeing this?
Same here. Brand new Nissan Altima Coupe with the Bose PY05F premium sound system. Stuttering, staggering and flat out freezes up.
-
Connect Iphone to car radio system
I try to find a way to connect my Iphone to my car radio. I wan to listen my mp3 and use my phone with the car radio system.
annuaire et actualitéThere are many ways to do this (I use the MonsterCable ipod adapter in rental cars, and the Pioneer Ipod Interface for my P7500DVDII) both with decent results. (great results if you turn on airplane mode). All GSM phones can effect stereo equipment to some degree, and the iphone is no exception. Alot of the 3rd party kits do not use shielded connections which just makes the problem that much more obvious. I found if I adjust the location of my phone in relation to the transmitter and the radio the Monster fm modulator gives satisfactory results without disabling my ability to recieve phone calls. The pioneer is the best, however I can't place the phone in the holder which was installed with the kit since it is in the DIN above the stereo (VW Jetta) and the phone constantly interferes with the amplification circuits. Moving the phone 3-4 inches fixes it.
-
I would like to transfer my i-tunes collection from my i-pod or back-up drive for use in syncing with my cars infotainment system without having to plu my i-pod in all the time. How do I acomplish this? thanks.
First find out if the car's system will play AAC fiiles, as sold in the iTunes Store.
If it does, read the instructions for the system to find out how to add songs to it, because you have not stated how that is done. No one here can second-guess this.
If it does not, you will need to convert the songs to a format the system does recognise. You can use iTunes to do that. If you need help with that, you could ask. Once converted, follow step 1, above.
By the way, call me a sceptic, but one might be suspicious of someone who referred to Apple products as i-pod, or i-tunes, rather than iPod and iTunes and one might even wonder if there was some nefarious reason behind it... -
HT1665 how can I connect my iphone 4S to my car stereo system?
I'd like to be able to listen to my itunes from my iphone 4s through my car sound system. Is there an accessory that I need for the connection? How do I do this?
any minijack to aux cable would work depending on your car sound system
-
HP Pav dv7t-6100 CTO w/Beats Audio sound system reverberates at levels above 50%.
HP Pavilion dv7t-6100 CTO Entertainment Notebook PC with Beats Audio sound system havingf volume distortion issues. At levels above 50% everything has ab reverb effect that gets worse the louder the volume. Using Win 7 Hm Prem.
This question was solved.
View Solution.Issue resolved itself.
-
I have just purchased a 2006 Volvo with Bluetooth. I have paired my phone with the car to make phone calls. I don't have a way to play my iTunes music through the cars audio system. Is there a special auxiliary adapter that I need to buy?
Nobody have notice this problem or have a tip for that?
-
IPhone 5S with ios8 fail to connect my Bluetooth car audio system
Dear apple users and developers,
I have read many threads about this issue mostly for iPhone 5 (ok i have the 5S) perhaps this makes a difference. With the ios7 i had no issue and always connected to my MHV-8300BT Pioneer device in my car. After update, when i get connected, i says "Calling My number" and when i push the button on my device to answer it drops the line, it keeps the connection but i do not hear, speak. Then i have to change the source voice system and i set the speaker or the iPhone.
On my fathers Bluetooth, a Motorola, it works, at the beginning i made a reset only for the Network settings,
Do not know what else to do
Thanks for reading my post
NikosHi MJM 1,
If you are having issues pairing your iPhone 5s to your car audio system via Bluetooth, you may find the following articles helpful (the first article also includes instructions on removing paired devices):
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/ht1664
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
Regards,
- Brenden -
Hi, new to the forums and apple tbh.
Moving into a new house and want to set up a sound system, thought apple would be the way to go as I have iPads, iPhones, iPod touch and nanos. I also have a few sets of Bose speakers which I would like to incorporate. What I am wondering is, what else do I need to buy to do this? Do I need seperate devices to attach to each speaker? Do I need a new router? And how would I configure it?
Ideally I would like 4 rooms each with their own speakers that could play simultaneously.
Thanks in advance!!!!First, please check out the following Apple Support article for details on setting up an AirPort Express Base Station (AX) for iTunes streaming. Note: You will need a separate AX for each set of speakers that you want to stream to. Also, note that you can stream a single audio file to one or more speakers, but you cannot stream separate audio files to different speakers simultaneously.
Second, the Bose speakers you mentioned would need to have an audio input jack, either analog or optical digital to receive the stream from the AX. As you know, Bose makes a number of different speaker/home theatre audio options. If your specific model of speakers do, then it's just a matter to use the appropriate audio cable between the audio port of the AX and the speakers.
Maybe you are looking for
-
HP ProBook 6460b: How do I turn off/disable trackpad clicking?
I originally asked this question here: http://www.tomshardware.com/answers/id-2628935/laptop-turn-disable-clicking-touchpad.html There was one response: "There should be a Synaptics icon in the taskbar or the bottom right of the screen. Go there and
-
Getting error while deploying the component from VC 6.0 to Portal 6.0
Hi all, we are working on Portal 6.0 sp 11 and trying to deploy some components from VC 6.0 to the portal. The developed components on VC gives the desired output on preview. but while deploying it gives the errorr Error in executing a proce
-
Is CS4 compatible with Dell Computers and GeForce Go 7400 video cards?
I have been told by this forum I needed to uninstall and re-install CS4 because Encore and the Media Encoder do not work even after the fixes and updates. I have two Dell computers with Nvidia video cards. Someone told me CS4 and Encore will not work
-
Facing Problem in Configuring Radio buttons
Hi, I have a requirement as follows: There are two fields: A1 - Input field R1 - Radio button field Now I need to display the fields as mentioned below, in ONE ROW of left Panel I to J K to M N to P A1.lab
-
Deconfirmation of Scheduled Line stock
Hello Experts, When we create Sales Order,in schedule line we confim some quantity for delivery ,after than we create Delivery note for that material qty. But if for any reason , customer doesnt want that material, we release that qty by editing Sale