Conntrans error with SENDING messages

Hello everybody.
Still using a CRM 4.0 SR01 SP08 build, this time I am facing a Conntrans error : sending messages keep failing, while the reception process is OK.
If I select "SEND & RECEIVE", the SEND status becomes orange, RECEIVE is blue (OK) and I get in the summary the error related to the failure. Synchronizing another time gives the same result. When I close Conntrans, I get a "GUI MFC Error" crash popup.
If I select "SEND only", the SEND status stays gray and I get the error related to the failure. When synchronizing again, I get a "GUI MFC Error" crash popup while in the background the SEND status becomes orange, with the error related in the summary.
What we have tried so far is :
- deleting the 1st message from outbound queue (table = MW_Q_OUT, where MSG_ORDER = 1 ), gave no result
- testing connections to Comm Station : connection is OK
- launching the Check Environment from the Client Console : it reports that ADO version seems to be less than 2.5, and the registry setup is not complete (it misses HKLMsoftwaresapmtsoptions) but as all was working before, I don't think it is very important.
Here follow the data from the logs :
c:TempDotNetQmtClient.log
22/02/2007 09:48:50 : PushFirstTime ('CRM_SITE_000000000000503', '', '0', 3)
22/02/2007 09:48:50 : GetMessageCountToSend : Found 50 message to send.
22/02/2007 09:48:50 : Updating pending confirmation table for queue CRM_SITE_000000000000503
22/02/2007 09:48:50 : TransferPushMessages (2, 20)
22/02/2007 09:48:50 : Total messages read from the out queue : 20
22/02/2007 09:48:50 : Sending data to the server without compression.
22/02/2007 09:48:50 : Sending messages to server :  Single_Send
Error In TransferPushMessage() : Type is not resolved for member System.Data.SerializationFormat, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089.
22/02/2007 09:48:57 : PullFirstTime (CRM_SITE_000000000000503, )
22/02/2007 09:48:57 : ConfirmMessageRecvd ()
22/02/2007 09:48:57 : LastReceived MsgOrder = 0
22/02/2007 09:48:57 : TransferPullMessage (20, 0)
22/02/2007 09:48:57 : PullMessage LastTID : 0AF90185-0998-0059-45DC4AA3
22/02/2007 09:48:57 : Next Pull: msg_count = <20> msg_size = <0>
22/02/2007 09:48:57 : TransferPullMessage : ActualPullMsg = <0> ActualSizeRcvd = <0>  MsgOnServer = <0>
22/02/2007 09:48:57 : Calling Confirm Messages after Recv end !!
22/02/2007 09:48:57 : Confirming unprocessed messages to server
22/02/2007 09:48:57 : ConfirmMessageRecvd ()
22/02/2007 09:48:57 : LastReceived MsgOrder = 0
22/02/2007 09:48:57 : GetReceiveStatistics (...)
22/02/2007 09:48:57 : GetSendStatistics (...)
22/02/2007 09:48:57 : Finish (0, 0, 296, 62, 0)
22/02/2007 09:48:57 : Finally ()
C:Documents and Settings feugierLocal SettingsTempTransferService.log
868        828                               ! Entering PreConnect
868        828                               ! Entering BeforeTransfer
868        828      Thu Feb 22 09:48:50 2007 ! Initialization for Site 'AE08F6F235D1C84BA36C73DE2CA25F54' succeeded, Server version info: - unknown -
868        828                               ! Leaving BeforeTransfer with 'OK'
868        828                               ! Entering Transfer
868        828                               ! Entering PushTransfer
868        828                               ! Entering 'PushMessages' for queue 'CRM_SITE_000000000000503' / limit 20 messages
868        828                               ! First time: Messages found to send in Outbound Queue: 50 (125 msecs)
868        828      Thu Feb 22 09:48:57 2007 E
  ERROR in TransferService - Send: 'Send' call to Communication Station/CRM Server
failed with fffffffb:
(null)
868        828                               E
  NO ERROR POPUP DISPLAYED !!!
868        828                               E
  _TransferPushMessages failed with fffffffb
868        828                               E
  Process modules loaded:
108 modules found in process:
Location  Module name                                                                                File version     Prog.version   File size  File date/time
00400000  C:Program FilesSAPMobilebinConnTrans.exe                                                                                1,210,863,0      1,210,863,0      376895  17.11.2004  18:07
011a0000  C:Program FilesCommon FilesSystemadomsado15.dll                                                                                2.80.1022.0 (srv03_rtm.030324-2048)      2.80.1022.0      565248  25. 3.2003  12:00
01230000  C:Program FilesCommon FilesSystemOle DBMSDASQLR.DLL                                                                                2.80.1022.0 (srv03_rtm.030324-2048)      2.80.1022.0       16384  25. 3.2003  12:00
01ed0000  C:Program FilesCommon FilesSystemOle DBoledb32.dll                                                                                2.80.1022.0 (srv03_rtm.030324-2048)      2.80.1022.0      512000  25. 3.2003  12:00
01f50000  C:Program FilesCommon FilesSystemOle DBOLEDB32R.DLL                                                                                2.80.1022.0 (srv03_rtm.030324-2048)      2.80.1022.0       69632  25. 3.2003  12:00
01f70000  C:Program FilesCommon FilesSystemOle DBmsdasql.dll                    
{...}  follow the list of what I think to be all the stuff loaded at that moment...
If anyone has a clue, a hint, a solution...
Thanks and Regards,
François

If you require Framework 2.0, upgrade to SP07. In this support package conntrans becomes compatible with 2.0.
EDIT: Sorry you are using 4.0, I meant SP07 for 5.0
Message was edited by:
        João Sousa

Similar Messages

  • " Error while sending message: 500 Internal Server Error" RNIF Adapter

    Hi,
    I have configured B2B integration as   Sender : RNIF adapter &  Receiver: XI Adapter.
    I am  able to test the configuration successfully in ESR and ID. But, whille testing with RWB using same test data, i am getting the following error:
    Error while sending message: 500 Internal Server Errot.
         Could you anybody help me, what could be the reason? Even i am not getting any error messages in SXMB_MONI.
    Thanks
    Laxman

    Hope this helps..
    -Is the 500 internal SErver Error in RWB is only for this issue and the message is successfully processed in SXMB_MONI?
       Could be the PI Service User :PIAFUSER(Adapter framework user) login crendential issue or run out time error.
    Try taking the payload from sxmb_moni and enter  it in RWB > Adater engine> Test Message Tab > give proper sender interface information , enter payload and try sending message.   check what is behaviour

  • Error when sending message: 500 Internal Server Error

    Hi
    IE is not accepting any messages,
    when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
    following things what i have noticed.
    1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the  IE admin) URL is  "http://<host>:8000/sap/xi/engine?type=entry"
    2. SICF all the XI serivess are up and running, i am able to test these service.
    3. The http port is active ( SMICM )
    Pls note the error is  500 Internal Server Error  
    regards
    Nisar

    I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
    This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
    1 Check Table Space is enough. ---i had installed server recently & very few interface running.
    2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
    3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
    Try restart the java stack(XI Server) and follwing services.
    com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
    com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
    basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
    regards
    Nisar

  • Error when sending message: 404 not found

    Hi,
    New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
    In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
    "Error when sending message : 404 not found"
    Also tried in Adapter Engine and the result same.
    Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
    Any idea's?? what might be the issue????
    Thanks,
    Venu.

    Hi Venu,
    "404 is a not found error", plz make a check of  your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
    Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
    http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
    Select XI Adapter Framework.
    Thirteen associations have to be registered.
    (Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
    If you can't find all the associations, then you will have to create the associations manually.
    This is a very good blog which answers ur question:
    check this weblog
    https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
    Regards,
    Vinod.

  • Error when sending message: 500 Timeout

    while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
    can any1 throw some light on this.

    Hi venu,
    you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
    there are two ways you can change it:
    1. check out note: 824554
    TCODE - rz10
    icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
    (for 800 seconds)
    8010 is my HTTP port so you have to change it:)
    2. SXMB_ADM -> configure integration server -> change specific identifiers
    runtime parameter:
    Parameter HTTP_TIMEOUT
    Meaning
    Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
    Personally I only changed the one from the instance profile but the second one should work too
    My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
    If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
    Let me know what u have done , if it works
    Thanks,
    srini

  • Test message from RWB: Error when sending message: 401 Unauthorized

    Hi Experts,
    While I am sending test message from RWB, I am getting following error:
    Error when sending message: 401 Unauthorized
    I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
    I am having SAP_ALL authorizations and few days back everything was fine.
    I think something wrong with configuration in XI but I am unable to pin point.
    Please help.
    Regards,
    Gourav

    Yes,
    but
    Role of Business System : Integration system
    Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
    How can I change it to Application system
    and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
    Regards,
    Gourav

  • RWB:Error when sending message: 404 Not Found

    Dear all,
    "i am getting error:      Error when sending message: 404 Not Found"
    while testing from rwb > Component Monitoring   > Non-Central Adapter Engines >  Adapter Engine AIPID > test message >
    with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
    sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
    and my id comm channel > target host > bid.xxx.com with service no
    (adapter type: xi
    adapter engine: Integration server
    address type: url address
    target host: bid
    service no: 8000
    path: /sap/xi/engine?type=entry
    i am working in nw2004s system)
    while testing cache connectivity test from rwb > Component Monitoring 
    i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
    green: Integration Repository
    green: Integration Directory
    green: Integration Server - JAVA
    red:Adapter Engine af.axd.aipid
    yello:Integration Server - ABAP
    Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
    [Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
    [Data Evaluation]: GlobalError
    though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
    what should i do?
    best regards,
    dushyant.
    refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
    and
    SXI_CACHE
    @8O@ Error during last attempt to refresh cache
    LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
    Smq2 = 0
    Sm58 = 0

    Hi,
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Cheers
    Manish

  • Error when sending message: Method not implemented

    Hi, All:
    We have newly setup system and when we test sending test message from RWB, (RWB-Component Monitoring-Integration Engine-Test Tab), we got following error:
    "Error when sending message: Method not implemented", I know this is related to post configuration issue, I just know someone has come cross the situation and how it was resolved.
    Thanks
    Liang

    HI Liang
    Yes it looks like post installation problem. I have not come across this but i think you should check with the RFC created for IE while installation. To connect IE & AE and even the exchange profile if something is missing
    Thanks
    Gaurav

  • Error when sending message(e-mail) from Process Chain ?

    Hello SDN s,
    How ya all ?
    I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
    The following is the Job Log Entries....
    30.06.2006 18:05:53 Job started                                                                          00        516         S    
    30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE)     00        550         S    
    30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out                                RSM        794         I    
    30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent          SO        654         S    
    30.06.2006 18:06:00 Error when sending message                                                        RSRA2        11         S    
    30.06.2006 18:06:01 Job finished                                                                        00        517         S    
    Thanks !!!
    Best Regards....
    Sankar Kumar
    +91 98403 47141

    Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
                                                                         Duration   Duration 
                             Completed  Error      In transit Waiting    In transit Waiting  
                                                                             hh:mm      hh:mm                                                                               
    B08(100)                        0          0          0          0                                                                               
    FAX Telefax              0          0          0          0       0:00       0:00
         5  INT Internet             0          0          0          0       0:00       0:00                                                                               
    SMTP              0          0          0                  0:00       0:00                                                                               
    X40 X.400                0          0          0          0       0:00       0:00
            RML R/Mail or            0          0          0          0       0:00       0:00
            PAG                      0          0          0          0       0:00       0:00
            PRT                      0          0          0          0       0:00       0:00
    So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
    could u give the steps to do that ? as i am the only one BW guy here !?
    Thanks !!!
    Best Regards....
    Sankar

  • Error when sending message: 403 Forbidden....sender si file

    hi...
    here iam working with File to IDoc scenario
    file is picking from a particular source but its is not showing any messages in SXMB_MONI and in IDX5 (outbound) or in RWB.
    when i check test my message in RWB its is showing Error when sending message: 403 Forbidden.
    can anyone explain me this problem plz...
    all my DESIGN and CONFIGURATION is fine....
    its urgent...
    THX..
    john wesly

    Hi John
    403 Forbidden
    The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.
    for more details on error code follow the link
    http://www.web-cache.com/Writings/http-status-codes.html
    http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
    http://www.helpwithpcs.com/courses/html/html_http_status_codes.htm
    first try to solve problem by making CACHE refresh
    either by directory
    Check whether you have given the right credentials. If you are very sure that you have given right credentials then your problem will be solved by restarting J2EE engine
    steps to restart J2EE engine
    1) run transaction SMICM
    2) then in the tab administration => J2EE instance(local) =>send soft shutdown with restart
    by this java engine will restart and will be up in 5-10 minutes and your problem will be solved
    Thanks
    sandeep sharma
    PS ; if helpful kindly reward points

  • Error while sending message.

    Hi,Could anyone explain the below error message and tell me how can we solve this?
    Error while sending message: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=NDE_CLNT200;TS=;AN=Z_FI_OUTBOUND_SAP_TO_SIP;ANS=urn:sap-com:document:sap:rfc:functions;
    Regards,
    sai.

    Hello,
    I have the same problem here. I already did many times redefine the wohle szenario and also tried out many different adapters. But any time I get the same error message. I checked the agreements and determinations very carefully. The Test in IDR said this:
    Senderagreement
    <not found>
    <Trace level="1" type="B">SENDER AGREEMENT SIMULATION</Trace> <Trace level="1" type="T">Simulating Adapter Engine...</Trace> <Trace level="1" type="T">Simply trying to loolup for the most specific Sender Agreement object</Trace> <Trace level="1" type="T">no objects found</Trace> <Trace level="1" type="T">Note that real results may differ</Trace>
    Receiverdetermination
    | BusSys_A | MI_HTTPtoJDBC_HTTP
    <Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
    Interface-determination
    | BusSys_A | MI_HTTPtoJDBC_HTTP | | BusSys_B
    <Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
    Interface-Mapping
    <not found>
    Runtimeerror
    com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_HTTPtoJDBC_Input_: RuntimeException in Message-Mapping transformatio~
    <Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>... (152 Zeilen)
    I hope you can help me getting it working. thank you

  • SOAP Receiver- Error While Sending Message: 500 Internal Server Error

    Hello,
    Our scenario: IDoc to SOAP
    I have added a third party system in the SLD and have used the same in my ID configuration.
    An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
    I have tested the scenario in ID from Interface Determination and its successful.
    But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
    "Error while sending message:500 Internal server error"
    If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
    Regards,
    Abhishek

    Hello,
    Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
    http://host:port/sap/xi/engine?type=entry
    Also check your firewall settings from PI to the third-party system.
    Hope this helps,
    Mark
    Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

  • Imp: Error while sending message: 500 Internal Server Error

    Hi all
    while testing my scenarios- by sending the message through component monitoring in RWB I get the following error in Integration Server
    <b>"Error while sending message: 500 Internal Server Error "</b>
    It seems that integration server is not picking up the messages.
    Can anyone help me on this?
    thanks
    Abhishek

    Hi Abhishek,
      Check whether the integration url is pointing to correct one something like http://host url:http port/sap/xi/engine?type=entry.
    Please do refer the below blog:
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Regards,
    Prasanthi.

  • HT204387 Subaru XV can read out messages but when we reply, it comes up "there is an error in sending message.  We cannot work out why.

    My Subaru XV reads out messages received on my iphone without a problem, but when I hit reply, it comes up as "error, cannot send message".  We have checked everything in the car set up and everything appears correct.  We are wondering if we have missed changing something in the phone.  Can someone please help? 

    Hi.
    This I have seen before...
    It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
    It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
    It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
    If, its the builtin SMTP service you are using, check this link:
    http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
    Check that and try again.
    Regards
    Thomas Balkeståhl - Technical Specialist - SharePoint -
    http://blog.blksthl.com
    Download the SharePoint Branding Project here
    Download the SharePoint 2010 Site Settings Explained here

  • Got error when sending message with big size

    Hello!
    I hope someone will able to help. I am facing with the size issue (I guess).
    The input file has a size of 58668 bytes. My program takes it and convert it to a TextMessage. When sending the file to the JMS queue, I got:
    javax.jms.JMSException: Failed to process message: Failed to add message=ID:f411d6c8-c1df-1004-8942-9b67f9629ee5, destination=QueueName3 (5)
            at org.exolab.jms.messagemgr.MessageMgr.add(MessageMgr.java:199)
            at org.exolab.jms.server.ServerSessionImpl.send(ServerSessionImpl.java:205)
            at org.exolab.jms.server.net.RemoteServerSession.send(RemoteServerSession.java:152)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.exolab.jms.net.orb.DefaultORB$Handler.invoke(DefaultORB.java:553)
            at org.exolab.jms.net.orb.DefaultORB$1.run(DefaultORB.java:511)
            at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(Unknown Source)
            at java.lang.Thread.run(Thread.java:595)This error is generated when doing:
    if(message instanceof TextMessage)
          this.producer.send(message);
      }producer is a MessageProducer.
    I looked around and did not find any limitation on the send method :o(
    FYI I am using OpenJMS has JMS provider.
    Thx in advance

    oh I looked into OpenJMS log (I could do that from the beginning) and I saw the following message:
    17:00:11.005 ERROR [ORB-Worker-18] - Failed to process message
    javax.jms.JMSException: Failed to process message: Failed to add message=ID:f3e38ebc-c1df-1004-8ecc-3d4e4e499b90, destination=
    QueueName3 (5)
            at org.exolab.jms.messagemgr.MessageMgr.add(MessageMgr.java:199)
            at org.exolab.jms.server.ServerSessionImpl.send(ServerSessionImpl.java:205)
            at org.exolab.jms.server.net.RemoteServerSession.send(RemoteServerSession.java:152)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.exolab.jms.net.orb.DefaultORB$Handler.invoke(DefaultORB.java:553)
            at org.exolab.jms.net.orb.DefaultORB$1.run(DefaultORB.java:511)
            at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(Unknown Source)
            at java.lang.Thread.run(Thread.java:595)
    17:00:41.333 ERROR [ORB-Worker-18] - Failed to process message
    org.exolab.jms.persistence.PersistenceException:
    ERROR 22001: A truncation error was encountered trying to shrink LONG VARCHAR FOR BIT DATA 'XX-RESOLVE-XX' to length 32700.
            at org.apache.derby.iapi.error.StandardException.newException(Unknown Source)
            at org.apache.derby.iapi.types.SQLBinary.checkHostVariable(Unknown Source)
            at org.apache.derby.exe.ac601a400fx0110xbb05xf3e9xffff95b19c308.e0(Unknown Source)
            at org.apache.derby.impl.services.reflect.DirectCall.invoke(Unknown Source)
            at org.apache.derby.impl.sql.execute.RowResultSet.getNextRowCore(Unknown Source)
            at org.apache.derby.impl.sql.execute.NormalizeResultSet.getNextRowCore(Unknown Source)
            at org.apache.derby.impl.sql.execute.DMLWriteResultSet.getNextRowCore(Unknown Source)
            at org.apache.derby.impl.sql.execute.InsertResultSet.open(Unknown Source)
            at org.apache.derby.impl.sql.GenericPreparedStatement.execute(Unknown Source)
    ...From what I understand, my issue is related to OpenJMS. Can the length be increased?

Maybe you are looking for