Conntrans u2013 initialization error and Client console show no inbound queue

Hallo,
I installed Communication station and Client application to two computers. Test from Communication station to CRM is OK, test from client to Communication station is OK too. When I run Conntrans it show: u201CError during Conntrans initalizatin; contact system administratoru201D. In log file is:
Exception in CGUIDlg::CreateComObjects_AltThread . Was comerror exception (Neplatný ukazatel hr:80004003); technical hint: Create InitPar NamedCollection</SESS_LOG_TEXT>
</SESSION_ENTRY>
Client console show me, that I have u201CNo unprocessed messages available in the queueu201D. But in transaction smq1 I have 923 entries to send to Mobile Client.
I regenerate metadata, reassign siteID and did transaction table again, but still no messages in inbound queue.
Configuration: CRM 2007, CRM Mobile Client 6.0 SP02.
Can anyone help me please with these problems.
Thank you very much.
Jiri

Hallo Wolfhard,
thank you very much for your help and fast reply. I uninstall .NET 1.1 on client side (I had both .NET 1.1 and 2.0). Now I can run Conntrans. When I try synchronizaiton, it wrote "initializing transfer process" and after few second Conntrans fell down. In log is no error - everything have succeeded. I include ending part of log. In Client console inbound queue is the same.
<SESSION_ENTRY>
  <SESS_LOG_ENTRY_ID>43090EC6134E43479082B5043DD7E18F</SESS_LOG_ENTRY_ID>
  <SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
  <SESS_LOG_TYPE>I</SESS_LOG_TYPE>
  <SESS_LOG_DATETIME>8.7.2008 15:04:19</SESS_LOG_DATETIME>
  <SESS_LOG_TEXT>Returning from CGUIDlg::OnInitDialog...</SESS_LOG_TEXT>
  </SESSION_ENTRY>
- <SESSION_ENTRY>
  <SESS_LOG_ENTRY_ID>A49BAA7D177D463491F635F8A64591E6</SESS_LOG_ENTRY_ID>
  <SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
  <SESS_LOG_TYPE>I</SESS_LOG_TYPE>
  <SESS_LOG_DATETIME>8.7.2008 15:04:20</SESS_LOG_DATETIME>
  <SESS_LOG_TEXT>Call to CGUIDlg::OnInitDialog in CTSDialog::OnInitDialog succeeded</SESS_LOG_TEXT>
  </SESSION_ENTRY>
- <SESSION_ENTRY>
  <SESS_LOG_ENTRY_ID>F5AE51A961664408830DDF07DA60C1F5</SESS_LOG_ENTRY_ID>
  <SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
  <SESS_LOG_TYPE>I</SESS_LOG_TYPE>
  <SESS_LOG_DATETIME>8.7.2008 15:04:20</SESS_LOG_DATETIME>
  <SESS_LOG_TEXT>Call to GetConfigurationDetails in CTSDialog::OnInitDialog succeeded</SESS_LOG_TEXT>
  </SESSION_ENTRY>
- <SESSION_ENTRY>
  <SESS_LOG_ENTRY_ID>1163EBE1ABB249ECAE0D3B230E6CCBB8</SESS_LOG_ENTRY_ID>
  <SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
  <SESS_LOG_TYPE>I</SESS_LOG_TYPE>
  <SESS_LOG_DATETIME>8.7.2008 15:04:20</SESS_LOG_DATETIME>
  <SESS_LOG_TEXT>Call to InitConfiguration in CTSDialog::OnInitDialog succeeded</SESS_LOG_TEXT>
  </SESSION_ENTRY>
- <SESSION_ENTRY>
  <SESS_LOG_ENTRY_ID>BE6FFFFE896D410A80D58C020195B56D</SESS_LOG_ENTRY_ID>
  <SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
  <SESS_LOG_TYPE>I</SESS_LOG_TYPE>
  <SESS_LOG_DATETIME>8.7.2008 15:04:20</SESS_LOG_DATETIME>
  <SESS_LOG_TEXT>Call to CreateAndPlaceControls in CTSDialog::OnInitDialog succeeded</SESS_LOG_TEXT>
  </SESSION_ENTRY>
- <SESSION_ENTRY>
  <SESS_LOG_ENTRY_ID>FD53890701BA40AE8DADB1F9701FDCFC</SESS_LOG_ENTRY_ID>
  <SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
  <SESS_LOG_TYPE>I</SESS_LOG_TYPE>
  <SESS_LOG_DATETIME>8.7.2008 15:04:20</SESS_LOG_DATETIME>
  <SESS_LOG_TEXT>Call to TaskBarCreateIcon in CTSDialog::OnInitDialog succeeded</SESS_LOG_TEXT>
  </SESSION_ENTRY>
  </SESSION_ENTRIES>
After I applied  note 1071267 on Client 6.0 SP02 I could not run Client Console. When I run it, I got "Failed to load control sbtstatus. Your version may be outdated. Make sure you are using the version of the control that was provided with your application". Conntrans after fix I can run, but it is the same as above - it will fell down after few second of synchronization.
My version of librfc32.dll is newer, so I did not applied note 1074669.
I will try to uninstall client side and apply note again to clean installation if it helps.
Thank you very much. With regards
Jirka

Similar Messages

  • Can't forward e mail is say's contact error and no names show up

    since downloading the 9.0 firefox I have not been able to forward
    e mail, it say's contact error and no names show up, this is very
    upsetting since I e mail that is important to forward.

    Oops, our posts crossed. The two main changes in Safe Mode would be: (1) disabling Firefox's use of hardware graphics acceleration, and (2) disabling all extensions. You can try to implement those manually in regular mode.
    '''(1) Hardware Acceleration'''
    Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches with various display drivers.
    You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    orange Firefox button (or Tools menu) > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    If you restart Firefox, are any issues improved? I suggest keeping it disabled even if you do not see an immediate benefit.
    '''(2) Extensions'''
    Disable ALL nonessential and/or unrecognized extensions. If in doubt, disable:
    orange Firefox button (or Tools menu) > Add-ons > Extensions category
    Then restart Firefox and test again.

  • Error and Web Console

    Recently I have been having problems with the way that FF4B12 is opening up. First off....the Error Console pops up and I have to click on the X several times to get it to close. Once it has closed FF opens another window to the Bing search engine. So now I have 2 windows open. One to a blank page ''(my default setting)'' and the other to Bing. I have read the post by strat5459 on Feb. 2, 2011 which says....
    “If you have the Web Developer Toolbar installed, do the following to prevent the Error Console from popping up:
    (If the Web Developer toolbar is not visible, you can also access the same parameters via the Tools/Web Developer/Options/Options menus in the Firefox menu bar).
    1. Click on the "Options" icon in the Web Developer toolbar.
    2. Click on "Options" in the drop-down menu.
    3. Click on the "Miscellaneous" icon
    4. Make sure that all the boxes are unchecked in the "Warnings and Errors" menu box.
    Now the Error console will stop popping up when you go to a site. You can always check the boxes to display the Error Console later if needed. “''
    Unfortunately it doesn't help me because when I open the Tools menu the only option for Web Developer available is to activate it. The only ''“Options”'' is the one at the bottom of the menu which is general options for FF and there is nothing in there regarding the Web Developer or Error Console There also is no ''“Options”'' icon on the Web Developer tool bar. I went into my Add-on/Extension Manager and I couldn't find the extension or add-on for the Web Developer ''(unless it might be listed under another name). ''
    I am running Windows XP Home, IE 8 and Firefox 4 Beta 12.
    I have pasted a copy of the web developer report in the Troubleshooting box below.

    Dan,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Client PC showing updates needed for declined updates

    I have many, not sure how many client computers both server and client OS showing 'Needed Count' for updates that were 'Declined' and/or 'Not Applicable'. Anyone know how this happens and if it can be resolved. It would be greatly appreciated.
    As the client obviously shows as not being up to date for reporting.
    Thanks.

    I have many, not sure how many client computers both server and client OS showing 'Needed Count' for updates that were 'Declined' and/or 'Not Applicable'.
    Physically and Logically Impossible!
    Declined updates show ZERO counts for all states.
    "Not Applicable" and "Needed" are mutually exclusive states.
    Perhaps you could describe in more detail what you are observing?
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box.  But hours later, I am still getting a disk full error and all of the memory has disappeared.

    I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box.  But hours later, I am still getting a disk full error and all of the memory has disappeared.  I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
    In checking the log files, here is the message repeated over and over....
    Jul  4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache.  SQLite error code:21, 'unable to open database file'
    Jul  4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache.  SQLite error code:21, 'unable to open database file' with userInfo = {
                  NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
                  NSSQLiteErrorDomain = 21;
    Jul  4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
    Jul  4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
    Jul  4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
    Jul  4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
    Jul  4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
    Any ideas on what to do next?
    I'm running and iMac 20-inch  early 2009
    Processor  2.66 GHz Intel Core 2 Duo
    Memory  8 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400 256 MB
    Software  OS X 10.8.4 (12E55)

    Step 1
    Quit Calendar. Triple-click the line below to select it:
    ~/Library/Calendars/Calendar Cache
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
    Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
    Step 2
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
    iPhoto ▹ Empty Trash
    Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • HTTPS Without client authentication shows error of Certificate

    Hi Experts,
    I am trying to develop a SOAP to RFC scenario where in SOAP sender HTTP security level - HTTPS Without Client Authentication is selected.
    I have downloaded WSDL from Sender agreement and trying to test web service from SOAPUI.  Now as per my understanding simply placing request to HTTPS:<host>:<port>:XISOAPAdapter/....   with correct user should work and this scenario shouldn't need any certificates.
    However in SOAPUI and even in RWB SOAP Sender, I am receiving error that - Client Certificate required.
    Any comments on why would it be happening ?    In fact whatever option in HTTP Security level I select, error remains same. In NWA is there any other configuration to be done to make this work ?
    Is below understanding right ?
    -- >> HTTPS Without client authentication will not need certificate exchange and simply user authentication will do
    Thanks..
    regards,
    Omkar.

    Hello Omkar,
    What you are trying to do is Consume a SOAP->RFC scenario (synchronous) from SOAP UI and you want that to be secure. With this requirement, just having the certificates alone is not sufficient (sorry for late response..i just came across this post when i was searching something else )
    1)How did you generate the certificate and the private key? Because Key Generation plays a Big Part in it. The Key should have been signed by a CA. Though its not signed by a CA, a trick which would work is, at the time of Key generation, provide the Organization Name as SAP Trust Community and Country as DE.
    2) At the time of Key Generation definitely it shall ask for a password. You remember that.
    3) Export the Private Key as PCKS12 format and the certificate as Base64 format and have it in your local system, (shall be used later in SOAP UI and NWA)
    Here follows the major part
    4) Open NWA and go to Configuration Management->Authentication
    5) Go to Properties Taband click Modify
    6)  Under Logon Application select the check box "Enable Showing Certificate Logon URL Link on Logon Page" and save it.
    7) Now go to the Components Tab.
    8) Search for client_cert Policy Configuration name and Edit it it. Make sure the following Login Modules are maintained in the same Order
    ==> Name: com.sap.engine.services.security.server.jaas.ClientCertLoginModule
           Flag : Sufficient
    ==> Name: BasicPasswordLoginModule
           Flag: Optional
    9) Now Select the name com.sap.engine.services.security.server.jaas.ClientCertLoginModule and you can see lots of entries under the Login Module Options. Remove them all and add anew entry (case sensitive). Save it.
    ==>Name: Rule1.getUserFrom
           value : wholeCert
    10) Now search for the Policy Configuration name sap.com/com.sap.aii.adapter.soap.app*XISOAPAdapter
    and edit it.
    11) Under the Authentication stack select the template client_cert against the used template label. and save it
    12)If you are using AXIS Adapter, do the steps 11 for the Policy Configuration name sap.com/com.sap.aii.axis.app*XIAxisAdapter.
    13) Now in NWA navigate to Operation management->Identity Management
    14) Search for the user PIISUSER (or any user id which you thing has good amount of authorizations to access the service)
    15)Click Modify and go to the TAB Certificates and upload the certificate (not the private key) which you downloaded in step 3.
    16) With this setup what you have done is you have created proper certificate, enabled certificate based logon for SOAP and AXIS adapter and associated the certificate with a user id.
    17) usually in Dual stack PI, we will have the same certificate added to the server pse in strustsso2 tcode. But since its single stack, just make sure in the cert and keys you add this certificate to teh Trusted CAs and also to the Server Keystore.
    18) Now in SOAP UI Right Click on the Project Name->Select Show Project View->Under the WS Security Configurations->Go to Keystore and certificates and add the Private Key
    19) In SOAP UI under the operation name, in the Request, in stead of providing user credentials, choose the private key name against the SSL Keystore entry.
    20) Before you execute the scenario  make sure you have chosen the HTTPS url and https port is proper. Usually its 443, but some customers configure their own port.
    Scenario should work now. Else if you track it using XPI Inspector, you can find out easily at which step it has gone wrong.
    Good Luck!!
    Best Regards,
    Sundar

  • Java error in session initializations - IC web client

    Hi All,
    When i access the CRM IC web client through browser (BSP page), Page is loading but inside the page im getting the following error.
    " Java error in session initialization [Error message: abcj2systemid.domain.com: CALL_METHOD(SYS_METHODNAME) sessionid = SOAP Runtime Execption; CSoapExceptionTransport : HTTP recive failed with exception communication_failure ( Message Class CRMM_IC_FRAMEWORK- message number 106).
    Pl suggest
    Thanks
    PRadeep

    Hi Sai,
    Kindly make sure that you have JREE1.4.0 and  not above for  your  error.
    Secondly, you are getting the first message because when you are closing your application by clicking onto the close at top, it doesnt log out your agent from the Webclient. The correct approach would be to close using the path Menu Bar> File> Close
    The channels are not  available because you have not maintained the queues and channels for your system. The same is do be done in SAP Easy Acess> Webclient> Additional Settings. It is also available in the Best Practices C78.
    The link for the same is
    http://help.sap.com/bp_crmv250/CRM_DE/index.htm
    Hope this would help.
    Regards,
    Rekha Dadwal
    <b>You gain a point for every point that you reward. So reward helpful answers generously</b>

  • Java error in session initialization Error - When calling IC Web client

    Hi All,
    When i access the CRM IC web client through browser (BSP page), Page is loading but inside the page im getting the following error.
    " Java error in session initialization [Error message: abcj2systemid.domain.com: CALL_METHOD(SYS_METHODNAME) sessionid = SOAP Runtime Execption; CSoapExceptionTransport : HTTP recive failed with exception communication_failure ( Message Class CRMM_IC_FRAMEWORK- message number 106).
    Pl suggest
    Thanks
    PRadeep

    hi Indhra,
    did you check, whether the services are active:
    /Nsicf
    /default_host/sap/bc/bsp/sap/
    sam_sess_queue and sam_notifying
    and the polling profile is defined with polling frequence:
    /Nspro
    ->Interaction Center WebClient
    ->Basic Functions
    ->Define Context Area Profile
    there "Define Polling Profile"
    best wishes,
    Hakan

  • IDOC Error in SM58 and Management Console

    Hi Guys,
    Good day!
    I am currently having issues on sending IDOCs to BODS.
    There are instances that an IDOC gets stuck or ends up with an error in transaction code SM58. In transaction WE02, the IDOC is
    successfully processed with status 03. In a set of IDOCs (10 or more), one IDOC is in error in SM58, usually the first IDOC gets the error and the next IDOCs are successfully processed. The error received in SM58 displays the following:
    Error 1: R3RfcClient(DI_CLIENT)ActaIDocFunc::Process()...
    Error 2: CPIC-CALL ThSAPCMRCV no data received
    However, the client interface is active/running.
    In the management console, the error Logs-History displays the following:
    (14.0) 04-08-14 23:32:51 (E) (8060:3868) Unknown: SP(INVOICE_001, ABC:1234)::flowThread() Flow became
    invalid during waiting for request (BODI-300137)
    (14.0) 04-08-14 23:32:51 (E) (8060:9356) Unknown: R3RfcClient(RFC_CLIENT_INTERFACE) ActaIDocFunc::Process()
    encountered processing error for Requeste(15149) (Communication Error. See real time job log for details.) (IDOC 0000001234567890/ABCDE). (BODI-300129)
    For the Real-Time Services log, the following is displayed:
    (14.0) 04-08-14 23:32:39 (E) (70684:47620) RUN-051005: |Session REALTIME_INVOICE|Data flow DATAFLOW_INVOICE|Loader query_IDOC_DETAILS Execution of <Regular Load Operations> for target <IDOC_DETAILS> failed. Possible causes: (1) Error in the SQL syntax; (2) Database connection is broken; (3) Database related errors such as transaction log is full, etc.; (4) The user defined in the datastore has insufficient privileges to execute the SQL. If the error is for preload or postload operation, or if it is for regular load operation and load triggers are defined, check the SQL. Otherwise, for (3) and (4), contact your local DBA.
    (14.0) 04-08-14 23:32:50 (E) (70684:68856) DBS-070401: |Session REALTIME_INVOICE|Data flow DATAFLOW_INVOICE|Loader query_IDOC_DETAILS ODBC data source <ABC\ABC,12345> error message for operation <SQLExecute>: <[Microsoft][SQL Server Native Client 10.0]TCP Provider: An existing connection was forcibly closed by the remote host. >.|<Regular Load Operations>|<IDOC_DETAILS>
    Given this, I would like to ask on how to eliminate this issue.
    Thanks,

  • I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50) I tried to do the update but I got an error - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".

    I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50)
    I tried to do the update but I get the same error each time - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".
    Also, do I need to Disable or Uninstall the Extension: "SEO For Firefox 3.3.4 as this was highlighted?
    == This happened ==
    Every time Firefox opened
    == When I try to do the update

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • How can I create a client console and work together with the Cache Server?

    How can I edit the following Cache-Server.cmd file to create a client console and work together with the Cache Server?
    The following is the cache server file: contacts-cache-server.cmd
    @echo off
    setlocal
    if (%COHERENCE_HOME%)==() (
    set COHERENCE_HOME=c:\coherence
    set CONFIG=C:\home\oracle\coherence\Contacts
    set COH_OPTS=%COH_OPTS% -server -cp %COHERENCE_HOME%\lib\coherence.jar;C:\home\oracle\
    coherence\Contacts;C:\home\oracle\coherence\Contacts\classes;
    set COH_OPTS=%COH_OPTS% -Dtangosol.coherence.cacheconfig=%CONFIG%\contacts-cache-config.xml
    java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3 %4 %5 %6 %7
    :exitEdited by: junez on 23-Oct-2009 09:20

    Hi
    To run the console, change DefaultCacheServer to CacheFactory
    Paul

  • I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope y

    I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope you will find a solution for the same.Help with using Adobe Muse CC

    Thanks,
    I have tried with a new site it's working perfectly.
    See the screenshot of the error.
    Thanks for your support Rohit

  • I/O error / and now it's not showing in explorer

    Hi!
    My shuffle has always been acting really strange, ever since i bought it more than a year ago. It has always been bugging me by diconnecting itself while transferring files, and then re-connecting itself again..
    This time, it did this about 5 times, and then it just froze. It couldn't be recognized by itunes anymore, but was still in the windows task-bar, and i could eject it and re-connect it. This wouldn't help though, and in the explorer it showed as I:, but if i tried double-clicking it, i got an I/O-error. Same thing with the ipod-restore-software, it froze - or simply wouldn't recognize the ipod. Now the icon in the task-bar has dissappeared and explorer can't find it, so i guess windows no longer recognizes it either. When i connect the shuffle to any USB-port (rear or PCI-card) it blinks: short blink amber/green - long green - short blink amber/green - long green and so on..
    The question is: why!? why today? and how can i repair it? my first thought was that the shuffle firmware was damaged by too many disconnect-reconnects, but i can't even format it cos of the I/O-error...and now it doesn't even show in explorer...bohoo..please help me! thanks /carl
    Shuffle   Windows XP Pro  

    this what happen to me too. When i plug in it recognize as removable disk but can;t open. it froze. Itune won;t recognize it and can;t update bc it froze when initializing. I get a ipode service error and ipod manager error.
      Windows XP Pro  

  • My  suddenly no longer works and dosn't show any sign and when i try to make restore for it iTunes shows me error 4005 and my iPhone does not respond to iTunes

    my  suddenly no longer works and dosn't show any sign and when i try to make restore for it, iTunes shows me error 4005 and my iPhone does not respond to iTunes

    OK, and when you searched for information on iPhone error 4005 what did you find?

  • When syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen.  have done the reset and restart, but still get same thing.

    when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen.  have done the reset and restart, but still get same thing.  Ipad does not show up in itunes even though cable plugged in.  Have shut down and restarted Windows 7 computer.

    I had done all of that to no avail.  I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again.  I had tried switching the USB port at the front of the machine but that had not helped.  Everything is good to go again.  thanks for  your reply

Maybe you are looking for