Considering buying time capsule have some Mac address related questions

Hi,
as mentioned above I'm considering buying a time capsule for backup and wifi purposes.
My internet providers connection depends upon a set Mac address from the first computer you register with, the system works with any router which then clones the MAC address and issues a wifi signal to all computers. I don't have access to the origional computer which we registered our connection on, it went to the great computer graveyard in the sky and I have no record of the Mac address.
I Would like to use the time capsule system as a router and remove my existing router. my questions
can the time capsule spoof or clone a Mac address ?
I Don't want to be offline while we deal with technical support as they are quite inept sometimes.
Is it in this case really plug and play ? Can I just plug it in set it up on my Mac and away it goes where other non Apple devices can use the wifi.
Without the existing router the cable that comes into the house connect directly to the ' original ' computer and the Internet only works on that computer
hope  someone can help me I would like to purchase this device

The Time Capsule cannot clone a MAC address, so quite simply, the product is not for you.

Similar Messages

  • How I can lock my Time Capsule on specific MAC addresses?

    How I can lock my Time Capsule on specific MAC addresses?

    Ok, you mean MAC filtering..
    This is called timed access on the airport utility..
    Set no access for all other wireless.
    Then add for your own.
    Setup all the computers that you want to have access and whatever the time..
    You can only MAC filter wireless clients not wired.
    Do a search if this is not enough for posts by Bob Timmons on Timed Access.

  • There are multiple MAC's in my house and I am considering buying Time Capsule to use as a file sharing device. Is anyone doing this? Pros/Cons?

    I have multiple MAC's in my house. I would like to create a file server environmet. I am considering using Time Capsule. Is anyone doing this? Pros/Cons?

    The Linksys should be about as fast as the Time Capsule. So you might as well connect the Time Capsule to the Linksys, disable sharing and wireless.
    Solution two is to use the TC as the router, wireless and network drive. This would save the power the Linksys needs. What is the Linksys connected to? a separate modem?

  • Can you use time capsule for your mac and have readynas backup your pc's on the same network

    Can you use time capsule for your mac and use readynas to back up your pc's on the same network

    Sure, that is trivial setup.. they both have different names and IP addresses.
    You should be able to use ReadyNas for TM backup but you should check the latest state of play for that.

  • I have a macbook air and need additional storage should i consider a time capsule or a simple external hard drive?

    I have a macbook air and need additional storage should i consider a time capsule or a simple external hard drive?

    If you move live files (files you don't want to lose) to an external drive, you need to back them up.  Any files not backed up are at risk of loss.  Hard drives and SSDs can fail at any time.  It is hard to backup a Time Capsule so a TC should be used only as a backup device.
    Do you have a Time Machine backup now?  If so, and if it is large enough, you can backup your internal and external disk to it using Time Machine.  If not, you all need to purchase an external drive or TC as your backup device.  (I recommend an external hard drive for backup instead of a TC.)  Ideally the backup drive should be twice the size of what you are backing up but 50% larger will work so if you have an external 1 TB disk and an internal 250 GB SSD then a 2 TB backup disk will work well.
    By default, Time Machine will not backup the external disk.  You need to remove it from the exclusions list:
    To have Time Machine backup your system disk and your external offload disk up onto your Time Machine disk:
     > System Preferences > Time Machine > Options… > Remove the offload HD name from the exclusions list.

  • Can i access my data on time capsule from some other network

    can i access my data on time capsule from some other network that is my data at home from office over internet

    There is plenty of info out there if you google..
    Here is a summary I just put into another thread.
    Remote access has been added back into iCloud that was in MobileMe..
    Read the info on setting it up from cloud service.. BTMM.
    http://www.apple.com/support/icloud/back-to-my-mac/
    If you want to do it without the cloud service, you have one major issue.. the public IP for WAN..
    The internal IP of the TC.. which will default to 10.0.1.1 btw.. is irrelevant. It is the IP of the WAN which you use to access the TC over the internet. And here you have a problem.. the TC does not include dyndns service. So unless you have a static IP address from your ISP, this will cause you grief.
    (If it is offered by your ISP.. get a static IP.. that eliminates all the issues.. and is far superior. Even dyndns service has issues if your public IP rotates too often. It is generally an extra cost item and requires a business account but some ISP offer it cheap or even free.. I joined an ISP that offered static ip for free because it gives me the ability to remote access my network without all the hassles you will see below.)
    There are ways around it.. setting up your own domain for instance.
    http://dyn.com/support/airport-time-capsule-with-dynamic-dns/
    But it is easier to simply use a different router.. almost all of them have dyndns service available.. place the TC behind the router in bridge and forward port 548 TCP to it.
    This is a bit old but still relevant.
    http://gigaom.com/apple/access-your-time-capsule-over-the-internet/
    Note .. there is no ftp, http, ssh (there is actually but it isn't accessible), or any other service to allow connection other than AFP.. so you must use a Mac in remote location to access the TC.
    The setup for the two methods is slightly different in the TC.. in the first instance, you need to turn on WAN access via disk sharing page in the manual setup.
    In the second case you do not need this.
    Remember security and put strong passwords on the disk. There are still security questions about this.
    If security is important.. there is a third and better (IMO) method and that is vpn.. you will need to buy a vpn router as TC also missed out on that.. establish a vpn with the main router and that will allow you access to your network.. you will also then be able to use SMB remotely not just AFP.
    Also if this office is a large company they should be running a firewall, which would block your access to home. You should check your IT admin people for what is allowed.. generally the only acceptable method is vpn otherwise you can drag viruses and trojans right into the network without the firewall catching them.

  • I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

    I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
    Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time... 
    Thanks for any help.

    I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
    This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
    The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
    How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
    There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
    If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
    Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
    Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
    Are you talking about files you are hosting on the TC?? Not Time Machine backups??
    Can you tell me exactly how you are accessing the TC.. please do a test..
    Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
    Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
    Do the same test from the same computer with wireless turned off running ethernet.
    Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
    I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
    eg
    Now do the test from the HP laptop and give me the results from that.
    Is the issue wireless only.. ??
    Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
    About Wireless Diagnostics

  • I have two .mac addresses; how does this work in iCloud?

    This is not about consolidating Apple ID's... I think.
    When I got my first .mac address, I thought I picked a good one at the time. Later on, due to the peculiar spelling, I opted for an additonal (paid) address which I use every day. Now the first one (which is an Apple ID) contains my calendars, contacts, etc. I never use the email portion of it, again because of challenging spelling. The second .mac address (also an Apple ID) is an email only account. This is the email account I use daily.
    When I make the transition to iCloud, I intend to keep my original AppleID (from the pre-.mac days) as my iTunes store ID.
    My question is, what happens with my two other accounts?
    .mac #1 with the contacts and such would move to iCloud and sync everything there as it currently does with MobileMe. Since .mac #2 is an email only account, would I even need to bother moving it to iCloud (if that's even possible), or would I just keep using that as email only using the current mail settings on my iThingys and Mac? Does anyone know if .mac #2 will live on after MobileMe vanishes, or will I loose my daily and coveted .mac email at that time?
    I'm sure Apple has a good reason for not allowing us to just consolidate everything in one place, but I know there are many out there with a similar situation to mine.
    I've spent a good deal of time tonight searching the various threads and can't seem to find an answer to the two .mac email dilemma. My appologies if it's already been discussed.
    To sum up, I have one Apple ID that I use for iTunes and intend to keep as such. I have two .mac addresses which are also Apple ID's; one that syncs with MobileMe and one that is email only. I would like to use iCloud to sync what is currently on MobileMe, AND continue to use the simpler email address that I've been using for years.
    Am I screwed??
    Thanks in advance for your help, and Happy Holidays to all!!

    Migrate the account which contains your calendars, contacts etc. first, at http://me.com/move and set it up on your Mac and devices.
    http://www.apple.com/icloud/setup/mac.html
    Now migrate the email-only account in the same way. On a Mac you can add it in System Preferences>Mail, Contacts & Calendars - it won't sync anything but will be added to the accounts in Mail where you can then use the email in the normal way.
    I don't know what the equivalent process on an iOS device is; very likely you need to add it as an account in the Mail app.

  • When I playback a movie stored on Time Capsule to my Mac Book Pro the time Capsule eject 3 or 4 times during playback

    When I playback a movie stored on Time Capsule to my Mac Book Pro the time Capsule eject 3 or 4 times during playback

    ilw-00 wrote:
    How can I do this? How can I find the sparesbundle? What is the best way to mount the time capsule internal disk?
    Open a Finder window. If you see your Time Capsule in the "Shared" section of the sidebar, clicking on it should show the "Data" volume (or whatever you named it) in the main part of the window. Double-click on it to mount the "Data" volume.
    If you don't see your Time Capsule in the Finder sidebar, you may not have enabled "disk sharing" in AirPort Utility. In AirPort Utility do a "manual setup of your Time Capsule, then select the Disks panel, then the "File Sharing" tab, then check "Enable file sharing", select a security method (I use "With a disk password"), fill in the remaining options as desired, then update the Time Capsule. Once it restarts, try again to see your Time Capsule in the Finder's sidebar.

  • Arp aging time on router and mac address aging time on switches set close t

    Hi,
    appreciate some advice on the following:
    what is the benefit of setting arp aging time on router and mac address aging time on switches close to each other?
    Thanks,
    Christina

    Hi,
    based on the below output, do you think implementing it will benefit? Thanks.
    C2950#sh int fa0/43
    FastEthernet0/43 is up, line protocol is up (connected)
    Hardware is Fast Ethernet, address is 000d.5e11.4e2b (bia 000d.5e11.4e2b)
    MTU 1500 bytes, BW 100000 Kbit, DLY 1000 usec,
    reliability 255/255, txload 7/255, rxload 2/255
    Encapsulation ARPA, loopback not set
    Keepalive set (10 sec)
    Full-duplex, 100Mb/s
    input flow-control is off, output flow-control is off
    ARP type: ARPA, ARP Timeout 04:00:00
    Last input never, output 00:00:00, output hang never
    Last clearing of "show interface" counters never
    Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
    Queueing strategy: fifo
    Output queue: 0/40 (size/max)
    5 minute input rate 933000 bits/sec, 149 packets/sec
    5 minute output rate 2981000 bits/sec, 263 packets/sec
    2819781393 packets input, 3782332886 bytes, 0 no buffer
    Received 266693 broadcasts (0 multicast)
    0 runts, 0 giants, 0 throttles
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
    0 watchdog, 0 multicast, 0 pause input
    0 input packets with dribble condition detected
    4015025747 packets output, 2328228393 bytes, 0 underruns
    0 output errors, 0 collisions, 2 interface resets
    0 babbles, 0 late collision, 0 deferred
    0 lost carrier, 0 no carrier, 0 PAUSE output
    0 output buffer failures, 0 output buffers swapped out
    C2950#

  • HI, I have a WRT54GL Ver1.1 I have enable mac address as...

    HI, I have a WRT54GL Ver1.1 I have enable mac address as authentication for the wireless. I have been able to add up to 40 Mac addresses; meaning 40 machines. How would i be able to add more machines; Do you have to buy another unit or a firmware upgrade will do. I need an advice. Thanks

    http://answers.microsoft.com/en-us/mac

  • Do the new Time Capsule have a security slot (Kensington Lock)

    Do the new Time Capsule have a security slot (Kensington Lock)
    How can i lock the new Time Cabsule 2013?

    Do the new Time Capsule have a security slot (Kensington Lock)
    No
    How can i lock the new Time Cabsule 2013?
    Enclose it in some sort of security cage

  • Can u use time capsule as a normal hard drive and don't activate the time capsule in my macs?

    can u use time capsule as a normal hard drive and don't activate the time capsule in my macs?

    Yes, but it will be slow and expensive compared to just buying an external and plugging it in locally.

  • How do you access files on your time capsule from your mac?

    how do you access files on your time capsule from your mac?

    i had an old macbook pro that i had all the pictures on and i backed it up to my time capsule through time machine. i got a new macbook pro retina display recently and im wanting to see if i can get some of the pictures off of my time capsule now but i dont want all of them.

  • Do the new Time Capsules have a different design?

    Having had my TC die, but out of serial number range for the paid repair, I did the job myself and it now works again - but for how long?!!
    The fault was obviously overheated capacitors, the same as the articles on the internet show, so I'm not sure whether it is sensible to buy a new TC.
    If the basic flaw has not been fixed with a new design that avoids these capacitors overheating then the same thing will likely happen again.
    Does anyone know if the new ones have been redesigned?

    Millions of later generation Time Capsules have been sold and we hear of a failure having to do with the power supply every once in while. Based on that, my opinion would be that the design is just fine. If my memory and observations are correct based on forum posts, I would also say that over the last 18 months, a higher percentage of AirPort Express devices fail than Time Capsules, even though the Express is a much simpler device.
    Having looked inside at both an early generation Time Capsule and a later generation Time Capsule, there are definitely different types of capacitors used. Not having a schematic of the circuitry, I can't tell you whether there were any design changes in later versions in the power supply section or not. That would be a question for the Apple product engineers.

Maybe you are looking for

  • Report Script - How to get the total on the any number of rows selected

    Hi,<BR>I am using Essase and report script for the reporting purpose. In this i would like to know how to get the sum of all the rows selected. I know we can use the calculate row, but it has to be done with print row to display the newly created row

  • How to display attached file size in XML Forms

    Hi, I've created a XML form to store presentations general information like author, subject, summary and a RID field pointing to the ppt file itself. I'd like to show the size of the ppt file but I don't know how... Any ideas? When I use default:size

  • How to access t-code FTW0 in ECC?

    Gurus: I try to access FTW0 in  ECC6.0 but get error Transaction FTW0 is an area menu and cannot be executed Could you help tell how to access FTW0?   Thanks!!

  • Problem loading a schema document using Java XDK

    I have an XSD file which I am attaching a portion of at the end of this message. If I use xmlns="http://www.w3.org/1999/XMLSchema" it will not recognize the "simpleContent" tag because I assume it did not exist in this version. If I use "http://www.w

  • Condition Limit  per material group

    Hi all, This is Puneet here, I have a requirement from  customer to control manual changes for a condition type with sum tolerance % that is based on the material group. However i can maintain upper limit or lower limit for a condition type but that