Considering open PR & PO for CBP

Dear Experts,
I have one issue. I want to consider Open PR & PO while considering net requiremment canculation in CBM.
ie in following case no planned order should be generated-
Stock : 2 PC
New Req : 4 PC
Open PR/PO : 3 pc
So no new planned order should be generated through CBP in above case. How to achieve this.
Regards,
Santosh

Hi
if I understand query correctly, you want system to consider the Open PO/PR only (not the stock) during Planning Run.
use planning strategy as 11 (gross requirements planning) with mixed indicator as 2 for that material in the MRP views.
Pl go through docmentation on strategy 11 and do the set up.
let me know, if you have any queries.
Thanks
JK

Similar Messages

MRP not considering open purchase orders when planning for open sales order

Dear Experts,
1.I have open sales orders as well as planned Independent requirements for finished goods for the current month. Also I have open puchase orders for raw materials which is part of the Bill of material of the finished goods for the current month.
Please what do i need to do to make MRP consider my open purchase orders when the system is planning for the open sales orders.
2 what tcode can I use to delete all purchase reuisitions in the sytem

There was no response to these questions so i had to close it to make space for another

MTS not to consider open PR,PO and quality stock

Dear all,
my client wants for MTS scenario system not to consider Stock of RM for Open Purchase order, Open PR and Quality Stock at the time of MRP run for SFG and FG.
I tried in SPRO settings also in OPJJ( availability check - 02 and checking rule - PP) remove all tick maintain all stock empty and OPJK ( order type PI01 assign to checking rule PP) but system consider stock , how to solve this issue.
pls guide me
sakthi

Hi
Goto OPPQ and slect you plant
Click the Available stock
Check the BOX Indicator: stock in transfer available for planning
In OPJJ check the Incl. PR and Incl. PO for your availability check
try this
Thanks
S.Murali

Open items excluded for clearing in FP05

Hi colleaugues,
At a customer we are trying to setup clearing for payments in the payment lot using clearing variants. Most of this works fine except for one situation. I have found different solutions to tackle the problem in event FKK_SAMPLE_0950 (or a copy that we are currently using).
I was hoping however that there is some other way to do this using customizing.
The problem occurs when a customer pays with a payment form reference (VVKKFAPOS-RFZAS) that has already been used for clearing an open item. The document in DFKKOP connected to the payment form reference is no longer open and can therefor not be cleared.
We wanted to setup clearing steps in a clearing variant that first checks if a document can be clearerd using the payment form refrence and if not succesfull be cleared against other open items on the contract that is connected to the Original item from the reference. However it is directly put in the clarification worklist for the payment lot although next to the reference also the contract reference is posted in the payment lot item. The payment lot however only seems to consider open items for the narrowest match on selection criteria, the payment form refrence and the contract.
Is there an easy way to make SAP also consider other open items on the contract or should I built in a check on open items that discards the payment form refrence and only keeps the contract when the Original item for the payment form reference has already been cleared?
Regards,
A. B.

Hi All, already found it myself. In the details for a payment in the payment lot I can enter different lines with selection criteria for a single payment. One with the contract and one with the reference.
Sorry for answering this myself....Hope it might be helpfull someday for someone else.

MRP FOR CBP MATERIALS- MRP TYPE 'VB', IN MD01

Dear PP Gurus,
My client wants to run MRP for consumption based planning materials (MRP type: VB), for there individual plants. For this I have suggested MD01 for planning in the perticuler plant by using the user exit available in the screen. But then also, after MRP run system is plannig all the materials which have MRP type PD as well as VB.
The user exit parameters are
User Exit Key: 002 (Consider MRP Controller for CBP)
User Exit Parameters : CBP
"CBP" is my MRP controller for materials which have MRP type 'VB'.
Pl suggest me what & where is the problem?
Thanks,
Regards,
Sachin Patil.

Dear,
It is possible through
User Exit: M61X000.
You need to maintain MRP group assign it to the VB type material then go ahead.
For details please refer this thread,
Re: mass MRP run
Regards,
R.Brahmankar

Activate "Open Item Management" for account, line items posted previously

Hi SAP Gurus,
I am having a problem when do a clearing for GL account due to "open item management" check box in Txn FS00 is not activated and only "Line Item Display" is activated. For your info, there are line items already posted and now we want this GL as an "Open Item Management". We are using ECC 6.0.
I did referred to a previous posting in this Forums Activate "Open Item Management" for an Asset, line items posted previously but i received these errors when following the solution. The errors are like below:
*Account 0039091200 is a reconciliation account in company code 5000
*Company code 5000 is not considered for the activation
What does it means by these errors? How do i rectify this error?
Thanking you in advance.
Regards,
Nazrul

Hi,
1. Executing report RFSEPA02 has a risk and also doubtful since it is not applicable in ECC 6.0 (New GL).
2. Create a New G/L with Open item management and transfer the balance to the newly created G/L.
Refer the earlier threads / replies else last option contact SAP (OSS).
Regards,
Shridhar

Open a CURSOR for a CLOB variable in 9i

Hi Friends,
I have a procedure which has a CLOB variable,and a sys_refcursor as inputs.
procedure proc1 ( p_sql clob, cur1 sys_refcursor);
I need to open this cur1 for p_sql clob.
OPEN CUR1 FOR P_SQL;
But it gives an error. I went through webs and found that it is not possible to do it in 9i. Do u know any alternate ? How can I do it ?

vishwa wrote:
Hi Friends,
I have a procedure which has a CLOB variable,and a sys_refcursor as inputs.
procedure proc1 ( p_sql clob, cur1 sys_refcursor);
I need to open this cur1 for p_sql clob.
OPEN CUR1 FOR P_SQL;
But it gives an error. I went through webs and found that it is not possible to do it in 9i. Do u know any alternate ? How can I do it ?Consider upgrading a an Oracle version that has been supported during the current Century.
If you installed a newer version DB, it could be used to access the exist V9 DB;
without any changes to the V9 DB itself.

Opening balance account for BP

Hi Experts,
I want to enter the opening balance account for BP. I want to know is there separate criteria for setting opening balance account for Customer and Vendor and which drawer??
Thanks in advance
Subhradip D

Sure Joseph.....
Lets take two scenarios....
First Scenario:
Just consider you have setup a new company who has no Openings and you started transactions and its BL and P&L builds as per the transactions you made in SAP.
Now after an year end when you do Period End Close then P&L becomes nil and ready for getting built for next year transaction so when you do PEC its balance shifts to Equity. And Assets and Liability remain same.
Second Scenario:
Now you consider that you have setup SAP where you need to punch Opening for 31 Mar. This time you no need to punch Revenue and Liability as you have already done PEC in your legacy software. and You punch only Assets and Liability. SO Offset account for Opening always keeps in Equity.........
This is my logic......
If you have some different view then you are most welcome to share......
Thanks & Regards,
Rahul

HT4061 how do i open an iphone for all carriers through imei payment?

my friend has an iphone that was bought at HONK KONG but belong to an american carrier.
i wanted to know how do i open my phone for an israeli company carrier throguh IMEI?
i know i need to pay but through what site do i do this? apple?
thank you

A couple more thoughts, though you didn't asked - the warranty on that iPhone is going to be suspect, normally Apple only warranties an iPhone for the country of purchase (an American carrier iPhone is considered US item and warranty only exists in the US), and check the frequency specs for the iPhone and see they match the carrier frequencies in Israel...not every country/carrier is using the same frequency allocations that the US carriers are using. Especially if this is a Verizon iPhone. You may have additional issues in that area as well.

I just bought aperture and downloaded it from app store. when I try to open the app I get a warning message that says: There was an error opening the database for the library "~/Pictures/Aperture Library.aplibrary". The only option the is to quit. What is

I just bought aperture and downloaded it from app store. when I try to open the app I get a warning message that says: There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”. The only option the is to quit. What is wrong?

Hi,
not sure what the problem might be, but you can try the following:
While pressing ALT+CMD on the keyboard, click on the Aperture icon in the dock: Aperture then opens in a special "recovery mode", and you're prompted to choose what kind of repair you need: Repair Permissions / Repair Database / Rebuild Database
Considering the situation, I'd recommend you to try "the "Repair Permissions" option first.
If that isn't enough (and it may well be the case), then go straight for the "Rebuild Database" option; it's a non-destructive opration anyway, but since you've just installed Aperture you shouldn't have anything valuable in the default library...
NOTE: if you do have some pictures in the library, instead, do a backup first! Time Machine is your friend
Another option would be to launch Aperture while keeping only the ALT (option) key pressed: Aperture will ask you what library you want to open, or you can choose to create a new one from scratch.
Good luck!
Corrado

TS3276 Mail has started sending duplicates of a message, especially group messages. It also opens 2 windows for writing a new email. Help.

Mail has started sending duplicates of a message, especially group messages. It also opens 2 windows for writing a new email. Help. How do I fix this?

Unfortunately there isn't official commercial support for Mozilla Thunderbird from Mozilla Corp.. I believe some contributors here ([http://mozilla.magicfab.ca myself included]) do offer such support, though.
''Before doing anything else, please do exit Thunderbird completely and [https://support.mozilla.org/en-US/kb/profiles-tb#w_backing-up-a-profile backup the profile folder] - it contains all your email, settings, filters, etc.''
Regarding your issue, it looks like the mail folder information may be corrupt. In the left pane, in the folder list, right-click on the Sent folder and select '''Properties'''. Choose "'''Rebuild Index'''" or "'''Repair Folder'''" - do you even have that option? Once done, exit TB completely and restart it.
Updating to a newer version will help anyone help you, if only because some of the documentation for older Thunderbird versions is a bit harder to find and testing to try & reproduce your problem will be harder. Don't do this just yet, though :)
After this issue has been addressed I would suggest considering using IMAP if your provider allows you to, and of course archiving your email to Local Folders and doing regular backups of your profile.
If you want to arrange commercial support, contact me via the link I provided above and we can discuss rapidly. Otherwise I am fine continuing here, however I can only reply as time permits. I am in Montreal (so, EST time zone).

Open eap needed for LEAP ?

We've got about 120 aironet 1100s in use. They're all configured for the use with leap "authentication network-eap eap_methods"
Since we're using all aironet 352 Pcmcia cards we don't have any problems.
Now we are in the negotiation phase for new handhelds using other brand of networkcards (Intel) which do not cope well with leap. The supplier now claims that we have to reconfigure our ap's with following line "authentication open eap eap_methods" to make it work. They're not able to put a cisco card in their device and it seems the only way to make things work.
As I understand "authentication open eap eap_methods" opens the gate for all kinds op eap such as PEAP, EAP-TLS, EAP. So we are tearing down the security of our network by doing this. There's a lot of confusing information about this going around.
Are we facing here a security issue by changing our config in this way?
Would appreciate your findings.

PEAP & EAP-TLS are considered more secure than LEAP. LEAP uses MSCHAP to transfer a hash of the password which is volnurable to dictionary attacks. PEAP & EAP-TLS transfer the auth info inside a TLS tunnel which is fully secure. If you don't want to change your existing clients, I would recommend you create a new SSID for your new EAP type and bind it to a new VLAN. This will allow you to run LEAP and PEAP/EAP-TLS at the same time.
Serge

Opening & closing balances for Vendor

Hi Experts,
I am doing a report where in i need to get the opening & closing balances for Vendor(s). I am using BSIK & BSAK tables. Are there any more tables involved and how do i carry out the calculations?
Please help.
Thanks
Dany

Hi,
There are various t. code to check line items for vendor like: S_ALR_87012103 but Any table is not helping to check opening/closeing balance for vendor.
Table BSIK and BSAK are having are records for open items and close items for vendor and system calculate the balance by using these tables.
Regards,
Vinod

Open sales orders for FD32

Hi all,
As everyone must be knowing in FD32 we can see Sales value ( Open sales orders + Open deliveries).
For one of my customers i can see an amount in open sales orders field, but i could not find the SO in VA05 report.
Can anyone help me to find list of Open sales orders which are reflected in FD32 sales value field.
Thanks all.
Rajesh

Dear Rajesh sandbhor ,
First please check whether there is any value in FD32>Extras>Sales Value.
If YES, then Instead of going for VA05, in fd32, go to environment>sales and distribution documents>open orders.
Please check and revert back if there is any issues.
Thanks & Regards,
Hegal K Charles

Open Order Quantity for open sales orders

Is there a standard SAP Report that gives the open order quantity for every open sales order. "Open" is defined as any order quantity that has not shipped. Delivery creation is not the same as shipment. VA05 Report does not contain enough information to calculate the open order quantity for an ERP-based backlog report.

Try VA05 schedule lines standar variant...include status fields and both ordered qty and confirmed qty. In SAP standard system order status, status A means open orders fully (Nothing shipped, everything opened). Status B means in process orders (Partially processed - shipped). Status C means complete orders (Nothing opened). As there is no delivered qty in VA05, you need to download to excel the file and calculate the difference between both qty fields for each A and B status. That is a way to get the missing qty to be delivered or open qty as you stated.
Hope it helps.
Jorge Fernandez

Considering open PR & PO for CBP

Similar Messages

Maybe you are looking for