Consignment and Reservations

Hi,
I need help with the following:
If you draw a reservation intended to consume cosigned material, but this material# has a balance as standard stock as well, when is the material identified as consigned in the reservation/GI process? In other words, how will the system know to subtract this material from a special stock balance? And what if it has more than one special stock balance, ie more than one vendor code? Are these balances created in the stock system when Info Records for consignment are created?
Thanks to anyone that can help.

hi,
Please help me on how to view consignment stock using tcode MB54, when i run this report the message is no stock exists for  specified data.
here the process of consignment in our company
1. create reservation tcode MB21 with movement type Z11
2. Printing of Picklist then turned over to warehouse for pick and pack.
3. confirmation of reservation using tcode MB1B with movement type 311 click the reservation and encode the reservation #. then confirm and get the material doc.
4. Printing of stock transfer slip form with reference of material doc. base on good issue for consignment..then delivered the consignment outlet.
we have many consignment outlet here in our storage location.
in one storage location we have many outlet like sample
Storage location = ZS01 for Supervalue
Outlet                = Megamall
                         = Nort Edsa
                         = Mall of Asia
Please help me
Thanks,
Ermin D. Concepcion

Similar Messages

  • Zune and reserved space problem

    Hi all, I just started using lumia 710 and finding it a great, fun and highly efficient device. One minor problem I am getting is with zune and reserved storage space.
    If I install a game/app in phone, the reserved space bar increases as expected. But the problem is that, even if I uninstall the game/app, the reserved space bar does not decrase, it stays the same as when the game/app was installed. so if i try out a few apps/ game and remove them later, i lose the equal amount of space from zune media storage. For example I tried out couple of xbox live titles and removed them later, net result --> my reserved space increased ~500mb while i lost 500mb from zune media free space.
    if anyone can help me to sort this out, I will be very much grateful.
    P.S. from phone i see i have ~ 3gb free space out of 6.28 gb. thanks

    Additionaly, I have all my music files in User/Music & in Downloads. I also see my iTunes "Media Folder" is located in User/Music/iTunes and is 20GB...the size itunes says.

  • PR to PO and Reservation to PR

    How to find the Table link between PR & PO and Reservation & PR?
    EKPO>>> BANFN >>> EBELN  (PR to PO)
    RESB >>> BANFN (reservation to PR)
    Is the above correct? Advice me on this
    RS
    Edited by: Ramapuram Saravanan on Mar 8, 2009 11:50 AM

    Hello,
    We are able to delete this line item at the purchase order Level. When we try to delete it at the PR Level, the deletion indicator is in display status.
    With respect to the Material being shipped, the MIGO and MIRO is not done for this particular materials.
    Any Inputs would be greatly appreciated.
    Regards,
    Nitin

  • Which table holds the link between Purchase requisition and Reservations ?

    Hi Guys,
    We are using MRP and as a result of the MRP run the reservations are converted to purchase requisition. When i look at transaction MD04 it shows me the Purchase requisition against a reservations.
    I would like to know which table holds this information? I mean which table will give me the reservations tied to a purchase requisition or vice a versa.
    I have looked into RESB and RSBD but could not find what i am looking at. RESB table has BANFN field for purchase requisition but this field is not populated. RSBD table hold the Purchase requisition and reservations but it only holds the relation for Direct procurement and not for all.
    Any idea where i can find the Preq and Reservations created through MRP run?
    Thanks
    VJ

    Try RKPF..
    thanks
    jz

  • The Diff Between Pre-Order and Reserved

    Pre-Order:
    You walk into the store between the 24th and the 1st of July and walk out with an iPhone 4.
    Reserved:
    You stand in line after all the pre-order people have gotten their iPhones (or if they don't show up, their phone is held for 7 days) and any extra phones are given to you, in a first come, first serve of the people who reserved. You are not guaranteed to get one.
    No Pre-Order or Reserve:
    You get dibs on the phone after all the reserve people have gotten their phone.
    End of story. Please stop asking.

    Sorry, that doesn't make any sense. I mean, I get that a lot of people don't know there's even a difference between "pre-order" and "reserve", but why would "reserve" people have to wait until after all the "pre-order" people get their phones? The Apple store employees know not to give away the pre-order phones, I'm assuming they're pulling from a different "pile".
    And there have been a few people on here who have said that Apple employees assure them there is an actual phone with their name on it. Difference is, their phone isn't programmed to their account yet and the reservation expires at the end of the day (as opposed to pre-ordered phones which expire after 7 days.) Not that the Apple store employees know all, they sure didn't today, but if it's a consistent answer like this, I'm inclined to believe them. Also, then, what's the point in telling the reservation people to come at 7AM if they're not even going to start giving them out then?

  • FM/BAPI for Post Goods Recipt and Reservations

    Hi All,
    Is there any BAPI/FM for posting Goods receipt and Reservations . Please send some sample example to post goods receipt using Inbound Delivery & Reservations
    Thanks
    Bobby

    Bobby,
          I think you can use the FM  BAPI_ACC_GOODS_MOVEMENT_POST for this purpose. You try to write a sample program and see how it works.
    Sojan

  • Purchase Requisition and Reservation Print out - Output Message determinatn

    Dear Experts,
    Can Anybody please explain the process of Output Message determination for Purchase Requisition and reservation.
    Thanks in Advance
    Vijay

    Hi,
    There is not standard message determination, you have to customized the transaction and output for PR & Reservation.

  • Consignment and Tax Base Amount

    All,
    We are getting the error "the tax amount must not be greater than the tax base".   When doing a trace the Tax Base Amount is ZERO.   Can someone tell me where/how the tax base amount is determined?  
    Thank you,
    Sandra

    What I have found so far is the system calculates the base amount by adding the line items that have a tax code associated with it.  In the scenario I have it appears the tax code is not associated with any of the items on the settlement and therefore the tax base = 0.   
    This is SAP standard transaction MRKO in a 4.5B system.   The info record has a tax code on it and it does not appear to matter which tax code in on the info record.  
    Anyone have any ideas on where I can look or what to look for?    Is this a tax set up issue?  Is it a program error?   I've tried to find all the tax configuration and compare with a working example in the same system but have not been successful.  I've also looked in OSS and there are several OSS notes that are remotely related to consignment and taxes but we are on a fairly high hotpack # so .... just not sure where to go.
    Thanks for any suggestions.
    Sandra

  • Procure To Pay, Consignment and subcontracting procesess

    Hi Guys !!
    Can any one tells me the full cycle process of P2P, Consignment and subcontracting in MM. Appreciate your valuable inputs on this ASAP.
    Thanks
    Khader

    Hello Khader,
    You can find total information about the SAP/MM/WM in the following thread.
    New to Materials Management / Warehouse Management?
    Hope this helps.
    Regards
    Arif Mansuri

  • Printout of PR and Reservation

    Hi
    I wanted to check if we can take print of Purchase Requisition and Reservation as per standard SAP.
    If we can take can somebody let me know the TransactionCode for the same?
    Regards

    Hi,
    In standard SAP no print out for Purchase Requisition and Reservation. You need to go for development with the help of ABAPer.
    Regards,
    Biju K

  • Consignment and pipeline settlement error

    Hi Expert!
    I have error when processing consignment and pipeline settlement for company code 4424. The error is "No message was found for partner 146073/company code 4424". Can anyone tell me what has going wrong and how to solve it?
    Thanks.

    HI,
    The MRKO Transaction only for settling the Pipe line and Consigmnet pscenarions.
    No effect if u maintain as like that.
    If u have doubt do one in Devlopmet.
    Regards,
    Andra

  • Consignment and pipeline

    what are the steps to create a consignment and pipeline purc order. what are the pre-requisite in MM?

    Hi,
    The process are:
    #Consignment Process:
    Vendor provides materials & stores them on your company premises. The vendor remains the legal owner of the material until you withdraw material from consignment stores. The steps:
    a. ME11,
    b. Create Contract, ME31 ( item category K)
    c. ME01 (enter Contract Number)
    d. Create PR( item category K)
    e. Create PO ( item category K)
    f.GR
    g.GI
    h. Consignment Settlement
    The Accounting Generated After GR/GI/Settlement are:
    1.Goods Receipt
         No Accounting Movement
    2.Goods Issue
         Consumption A/C: DR
         Consignment (Liability Account ) Payable: CR
    3.Consignment Settlement
         Consignment (Liability Account ) Payable: DR
         Vendor Account A/C: CR
    #Pipeline material
    Pipeline material is a material that flows directly into the production process from a pipeline (for example, oil), from a pipe (for example, tap water), or from another similar source (for example, electricity). A material from the pipeline is always available; i.e. it can be withdrawn from the pipeline at any time and in any quantity.The steps are:
    a.ME11,
    b.ME01,
    c.ME51,
    d.ME21,
    e.MB1A
    The Accounting Generated After GI/Settlement are:
    1.Goods Issue
         Consumption A/C: DR
         A/c Payable For Pipeline : CR
    2.Pipeline Settlement
         A/c Payable For Pipeline : DR
         Vendor Account A/C: CR
    Regards,
    Biju K

  • Consignment and Pipeline Settlement - MRKO

    Hi All,
    Is there any way to remove Zero and Negative values from 'Consignment and Pipeline Settlement' (MRKO). I am having material documents with Zero and Negative values and when I tried to Settle them, so that would not appear next time in the list, getting error "Zero value in amount is not allowed". Is there any way I can delete them so that these record will not appear in MRKO.
    Thanks
    Anil

    Hi Anil,
    How you are getting ZERO and Negative Vale for consignment?
    Consignment settlement will happens after withdrawal of goods or after Sales based on your Consignment Purchase Info record.
    Bye,
    Muralidhara

  • Agent Desktop's agent state toggles between "ready" and "reserved

    Hello and thanks for all of your past help.  I have a user whos'e Agent Desktop's agent state toggles between "ready" and "reserved when no calls are coming in to he IP Phone 7941 or 7961.  Can anyone help?
    Thanks, Chet

    Is the agent's phone actually ringing at all? If not I suspect the IP IVR ports are unable to call the agent. UCCX tries to send a call to the agent so it sends the reserve event to the agent and then tries to send the call to the agent but is failing so it cancels the event flicking the agent back into ready. Perhaps check to make sure that the ports have an appropriate calling search space to call the agent extension. Maybe configure a phone the same as the IVR port and check to see if you can call the agent extension?
    Cheers,
    Nathan

  • Self-Billing  Invoice( consignment and ERS )

    Hi  to all...
    i am working on sap standard form MR_PRINT and i have to genarate a Self-Billing invoice which are associated with Consignment and ERS ( Evaluated Reciept Settlement ) using this standard form.
    can any one tell me the answers regarding this issues.
    1) Tell me the Path to Modify the standard form?.
    2) How to see the Print Preview of The standard form MR_PRINT ?.
    3) is there any T-code ( or Path ) viewing the Print PREVIEW ?.
    Please Give the answers as soon as possible.
    Thanks and Regards in advance.
    Shaik.

    hi
    enter SE71 transaction code
    enter the form name
    display and click on print preview.

Maybe you are looking for