Consignment delivery doesn't appear in VEPO

Hello everyone!
I have the following problem:
When an Outbound Delivery is a consignment delivery, there is no entry in VEPO.
When an Outbound Delivery is a normal delivery, there is an entry in VEPO.
Is this normal?
Thanks in advance for your response!
Best Regards,
Luís Andrade.
P.S.: Forgive me if my question sounds stupid, I'm new to MM...

Hi,
VEKP - Handling unit header
VEPO - Handling unit item
I don't think there should exist a (general) rule that for consignment process HU is not in use and for normal outbound deliveries HU is in use.
- Maybe your internal rule is:that you pack delivery items in case of normal OBD and you don't pack delivery items for consignemnt OBD
- It also may happen that you used different SLocs to pick the goods and for normal OBD you used a SLoc for which HU requirement is set.
Please check in VL03N the packaging view of delivery (click on "pack icon"; or (menu) > Edit > Pack). Please also check SPRO > Logistics - General > HUM > Basics > MM > IM > HU Requirement for SLocs and Default Values for Deliveries
Regards,
Csaba

Similar Messages

Shipping tab doesn't appear in PO

Hi MM experts,
When I am creating returns PO (return box checked), the shipping tab is not coming in item detail. System gives below error.
"Not possible to determine shipping point for item"
The most common reason this shipping tab doesn't appear in PO is because a Returns Vendor customer account number has not been maintained on vendor master. But in this case I have checked the vendor and found that Vendor customer account number has been maintained. And the material also has been extended to sales org xxxx, distr.channel xx.
I have checked TVSTZ table, eveything seems to be OK.
Error descr: Message no. 06855, Diagnosis "The system was not able to determine a shipping point for the combination shipping condition , loading group xxx, plant xxxx in the case of item xx."
System Response
It is not possible to create a delivery in the Sales and Distribution component without specifying a shipping point.
I do not know what to do or what is missing??
Can anyone suggest how to proceed to create return PO.
Thanks in advacne
Suresh.

Hi,
Please refer SAP note- 831469 - Customer, Shipping Point for Storage Location incorrect for the same.
Also check wether Sales views are maintained for that Material you are using for the STO, Check and maintain the loading group and shipping conditons in MMR sales: General/Plant View for receiving plant
Also Check created SD customer(vendor) by you in system by XD01.
and check for the complete STO config settings
SPRO - MM -- Purchasing -- Purchase order --- Set up stock transport order -- define shipping data for plants
Regards,
Sandesh Sawant

Delivery Note not appearing in MIRO for DCGR

Hi Friends ,
I am facing a problem in MIRO . The Delivery Notes are not appearing for "Delivery Costs at GR"(DCGR) , while it comes for individual GR which u can see by Clicking the PO-History Tab . But when we check the PO-History in ME23 , there the Delivery-Notes gets reflected against DCGR .
The users are facing a problem because they are unable to determine which delivery Cost is against which GR ( as the Delivery Note doesn't appear ) .
Kindly reply as soon as possible , if any NOTES are to be applied or so .

Hi Sudha,
have you found solution for this prob? coz mine prob is about the same. but the different when they enter delivery note at material document GR at header, they put wrong number which is extra zero. i don;t know if this the factor coz invoice receipt not allowed to be process. i mean DCIR.
Regards
Aishah

SPED output type doesn't appear when goods issue done

I have made goods transfer from one storage to another via two-steps procedure. Both storages have WM.
So I create UB order (Me21n) -> outbound delivery -> transfer order. Then I approve the transfer order and the goods issue is done automatically. In this moment SPED output type has to appear in outbound delivery and to create inbound delivery.
SPED settings are:
dispatch time - 4 (Send immediately when saving the application)
transmission medium - 8 (special function)
req. routine - 408.
The problem is that after goods issue done via transfer order approving I haven't SPED in outbound delivery. I need to open the delivery to change (SPED appears) and save it. Can it be solved by any standard method or only by ABAP?

Hello Mihailo
Thank you for your answer.
I think so too but I hope it can be another way. It's really strange situation because I see that the delivery status is updated after the goods issue. So the devilery is re-saved. But the output document doesn't appear.
How you solved it in your expirience via change the delivery in background by ABAP or via any new req. routine?

After upgrading to IOS5, iphone doesn't appear on Itunes, and i cann't transfer pjhotos on iphoto, .., after upgrading to IOS5, iphone doesn't appear on Itunes, and i cann't transfer pjhotos on iphoto, ..

after upgrading my iphone 4 to IOS5, it doesn't appear on "Itunes", and also i cann't transfer photos on "iphoto", .., so i cant load, save or erased anything now!

They are now in the videos app!

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

HT1382 i got an iPad and all my app's, music, and movies are on it, but when i try to download some apps to mi iPhone, they doesn't appear on the purchased tab, how could i move them back to itunes so i can access thru iCloud?

i got an iPad and all my app's, music, and movies are on it, but when i try to download some apps to mi iPhone, they doesn't appear on the purchased tab, how could i move them back to itunes so i can access thru iCloud? i have an 2nd generetion ipad and an iphone 5, thanks for you answers!

(I think the daughter got he better end of the deal!) I believe if you change the password and user id one of the devices it will stop that from occurring. But I'm not the one to tell you how to do it; someone like "Illaass" (Illaass seems to know how to correct / fix almost anything!) will know how if you don't. Just look for the "cat" icon.

Can't delete file from desktop. Can't get info. Doesn't appear in ls -a. What?

Hi folks,
I file has appeared on my desktop. I believe it's a temp file created while downloading something in Safari. When I try to delete it, I get "The item x can't be moved to the trash because it can't be deleted":
I tried right click > Get Info, and nothing happens (the info dialog does not appear).
I tried ls -al on my desktop, and the file doesn't appear in the list:
How do I get rid of this thing? What is it?

Weird. I guess if this were happening to me, I would see if the thing is still there after a reboot. If it is still there, I would boot with command-R and use Disk Utility to verify and repair the disk (not permissions).
The file name indicates you were downloading something to run under windows. Do you have windows?
charlie

If i selected to "Create a new backup" and then cancelled that option but want to go back and select "Inherit backup history"; how do i go back and do that since now when i plug in my HD, that option doesn't appear anymore?? Any Help?

If i selected to "Create a new backup" and then canceled that option but want to go back and select "Inherit backup history"; how do I go back and do that since now when I plug in my external hard drive, that option doesn't appear anymore?? Any Help? I bought a MacBook Air, but decided to return it for the newest model, and I wanted to back it up so that I can then back it up on my new MacBook Air. I didn't understand the option to Inherit or start a new back up, and therefore selected the option to create a new backup. I believe I should have selected to Inherit backup history so that when i back it up on the new MackBook Air, it appears the same as the one I'm returning.... Is there anyway that i can re-select the option to Inherit backup history for time machine?

Thanks for sharing this link.
I've posted a question here https://discussions.apple.com/message/22049103#22049103 describing my situation. Are you able to suggest me the right option?

Save/open dialog box doesn't appear

Hi,
I have something strange. I can open and edit a project by double clicking on it, also start a new project. But when I want to save or open a project via "save as" of "open project" the dialog box doesn't appear. Saving an existing file trough "ctrl+s" works.
Things I tried already are:
- Restart my computer (windows)
- Clear my AE cache
- Reinstal AE
Has anyone has this before? It would be great if it got solved because I can't complete work because of it.
Tnx & grtz,

Sorry, here the information that is required:
Version 11.0.4.2 - CS6
Installed recent updates: Yes
OS: Windows 7 Pro (Service pack 1) 64 bit
Model: HP Z420 Workstation
Processor: Intel Xeon CPU E5-1620 @3.60Ghz
Ram: 8Gb
Has it worked before: yes. It started after I opened a project (trough "open project") because double clicking on this project gives the follwoing error: "The directory name is invalid". Via "Open project" I could open it.
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)? No
Quicktime 7 pro installed
Do you have any third-party effects or codecs installed? Yes, Optical Flares & Trapcode. But is unrelated since it isn't a specific project.
Are you using Render Multiple Frames Simultaneously multiprocessing? Yes
Are you using the ray-traced 3D renderer? No
Thanks for the help. If you need any other info, let me know

In Mail, Reply To and Subject area doesn't appear

In Mail, Reply To and Subject area doesn't appear on an opened email.

Hi
Go to Mail / Preferences
on the Viewing tab - Show header detail - drop down box
Select whatever suits you. - try default
/Dennis

Pages 5.5: app doesn't appear in dock or tab bar when open

We are seeing this issue on the two macs in our office we tested (mine and a coworkers). To reproduce it:
Open pages
Click "Done" on the open/new document window (or simply close all documents you have open)
Click the desktop to send Pages to the background
If you Cmd+Tab, Pages doesn't appear for us. It also doesn't appear in the dock. Activity Monitor shows the app is still running and using spotlight to "open" it again brings it back to the foreground.
Is anyone else having this same problem?
Pages 5.5 2109
Yosemite 10.10
MBP 13", 2.66 GHz Intel Core 2 Duo
8 GB RAM
256 GB SSD

Newly downloaded apps will appear in the column on the left. The images on the right show what is installed on the device. Perphaps the logic has changed slightly with older builds also including what would be synced as well. Untick the box that says Automatically sync new apps and you can choose whether or not to include a new app instead of syncing, then removing.
tt2

Report parameters doesn't appear correctly

I have a report .rdl under Visual Studio2010 and sql server2008.
the report language is arabic and all the fields appears correctly, but the parameters doesn't appear correct it shows stange characers(not question marks) and all the remaining fields show arabic characters correct.
i run the report on internet explorer9.
i don't know what is the problem, i searched alot and there is nothing new. what can i do??

Hi nermo,
You have mentioned that the report is work fine on Chrome. It may be a compatibility issue of IE9. At this time, I suggest that you first check this issue in IE9 Compatibility View mode. Please refer to the following steps:
1. Launch the IE 9, and press Alt+T to select the Tools.
2. Click Compatibility View settings.
3. Check the “Display intranet sites in Compatibility View” option, and click Close.
Reference:
Fix site display problems with Compatibility View
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Trying to limit number of emails showing but when I go to "mail, contacts, calendars", "show" doesn't appear as an option. What now?

Suddenly I have over 300 emails appearing on my ipad2. I know you are supposed to be able to change that by going to "Mail, Contacts, Calendars", then select "Show". Well, when I do that, "Show" doesn't appear as an option. Any thoughts on how I get "Show" back?

Tap the blue + sign in the upper right corner of the Safari toolbar to open a new tab. Then look in the lower left portion of the screen for the word "Private". Tap that to turn off private browsing.

Delivery from project appearing in billing due list

Hi,
We have a scenario in which delivery is done through project (Tcode CNS0) and the billing is done through sales order (order related billing)
The delivery type LP used for the delivery is not assigned to billing type since we are not supposed to do billing with respect to delivery document.
But these delivery documents are appearing in billing due list (VF04) and remain there in the due list
We want delivery documents (from project) NOT to appear in the billing due list.
Please help.

Hi Shambhu,
Lets assume ZLP is not relevant for billing and if delivery is done then how can excise invoice ibe generated.
Issue is delivery doc type LP is assigned to billing type which is meant for excise invoice and not assigned to billing type of final invoice.
Now in India, why LP is assigned to excise invoice billing type, because for every delivery excise invoice is created.
But for the same delivery type LP in europe, excise is not created and hence these documents remain there in billing due list.
The issue can only be resolved if europe starts using another delivery type like ZLP which is not assigned to any billing type, but again that seems to be very difficult to implement at this moment of time.
Thanks Shambhu.

Consignment delivery doesn't appear in VEPO

Similar Messages

Maybe you are looking for