Consignment Process( site to site transfer within same company code)

Hi All,
We are having 98% items are the vendor consigned article. We are working in IS retail environment ECC5.0. Our scenario is as follows:-
We inward all the vendor consigened articles in Distribution center and stock it in DC. From DC we want to transfer vendor consigned articles to Retail stores where we are going to sale vendor consigned article.After the sale we get the payments from the vendor.
My problem arise here :-
1. How do I transfer vendor consigned good to retail stores as vendor consigned goods so that I can see the inventory of vendor consigned articles in retails stores and monitor the stock.
2. I am looking forward for temporory solution that I should use MB1B , Mvt Type 301 K ( consigenment). But problem is that It create internal documents (MM documents) but I need transit document which will show the value of items,.
Since it is consigned artcles it will not generate accounting documents.From Should I get the price.?
3.I tried as Stock transfer (STO ) process but for regular ( owned ) item it is working fine but for consigned materials it say" You can not have STO process for Consigned articles with in same company code".Please suggest How should go? so thatI will have consigned stock
Looking forward for your valuable and earliest response
Sanjay Rahangdale
M09327162228

hai
you can use 301 - K in MB1B .it will not generate accounting document since the material belongs to vendor.but you have to maintain consignment info record in both plants .the price should be same in both plants.
it will solve your problem
reward if useful

Similar Messages

Stock Transfer Between two plants within same company code

Hello,
We are using scenario-'Stock transfer between two plants within same company code. Scenaro is like Plant A is receving plant and Plant B is delivering Plant.
Plant A release PO for 100 nos to Plant B
Plant B issues 100 nos (via delivery) to Plant A
But Plant A receives only 50 nos physically so they do Goods receipt for 50 nos , but document got generated for 100 nos (when plant B issues material).
Now Plant A do not want to receive remaining 50 nos physically, but wants to reduce material document which got created when goods issue posted by plant B
Now stock in transis (mb5t) is 50 nos.
How to reduce this material document. or any another alternative solution for this?
Thanks,
Shailesh

Hi There
Reversal of partial is not possible ,
But you can use the Mov Type 557 and 558 to do the adjustments in Stock in transit qty
Few more details on STO adjustments
Hi There
it can be settle in many ways,,,
1. Receive the goods as 100 and Scrap the 50 nos from the received plant,,- If the receiving plant is responsible
2.Revert the PGI/Transfer movement(Vl09) and send the 50 nos again from the supplying plant- of the Supplying plant is responsible,
3.Also we have the movement type 557 and 558 without doing the above two steps you can correct the qty from stock in transit itself,,
4. also you can check the below similar thread
STO - material lost during tranfer from plant A to plant B
5. If above are not ok, then receive the goods as 100, And raise the STO as your plant as supplying plant and receiving plant is (Supplied 50 nos less) plant,, Do the process without sending the material.. in this way that 50 nos can be adjusted,,
6.Here is some more details
557 Issue from stock in transit (adjustment posting)
Only use this movement type (also the reversal movement type) under the following circumstances:
Using movement type 557, you can correct purchase-order-independent stock in transit if
- a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
- stock in transit still exists, even though there are no open stock transfer orders for the particular material
This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
This movement type may not be copied.
Note!
Before using this movement type, note the following:
- 392205 Analysis stock in transit / Correction if split valuation
Possible special stock indicators:
E, Q
7. As previous post says if you have the note for this issue you can use that also
You can use any one of the way to solve the issue, Hope it helps
Cheers
Senthil P

STO-Within same company code and same sales organisation

hi freinds
i need steps for STO Within same company code and same sales organisation "xyz" with different plant "X " and " Y"
with regards
dinesh

Hi,
Sales organization is linked to sending plant. It does not matter if receiving plant is using the same or different sales organization. The setup from sending plant is independent from that.
As for the STO standard setup, I suggest you search SDN first. Below example link.
STO setup article link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c05e2251-91f0-2c10-4e91-e919468e4687
Regards,
Dominik Modrzejewski

STO processing within Same Company Code with Billing/Invoice

Hello Guru's, I have been asked by our finance department to look at having billing/prices associated with our STO (UB) movements of stock within the same company code. We currently use a UB order type but obviously no billing is associated with the delivery type NL. We do have inter company STO's (order type NB) and have prices and billing associated with the delivery type NLCC.
I wanted to take a copy of the NB order type (copy to ZB) and attached to relevant elements in the IMG (assign doc type & define delivery types). I have done this in an open DEV client and have got a new PO created (ZB) and created a delivery, picked and confirmed the picking. I have got to a point of PGI and i get the following message ' Purchase order 45########## does not contain items for a stock transfer'
Firstly, do any of you trade via STO within the same company code and associate a billing document? The reason we want to is that our manufacturing plants want to charge a premium to the packing and distribution warehouse for the goods to get profit visibility. At the moment the standard cost of goods manufactured at our manufacturing plants transfers to our distribution plant at the same value.
If any of you have any ideas then please let me know.

Hi,
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 for Margin and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Margin Account - Cr - 10 INR (Supplying Plant)

Plant to plant stock transfer in same company code

Hi everyone,
I want to know the process for stock transfer between plant to plant in same company code.
Regards
Prabudh

http://help.sap.com/bp_bblibrary/500/html/J51_IntProcSTwD_EN_IN.htm
In a company, goods movements do not only occur in the form of goods receipts and goods issues. Depending on the organization of the company (for example, decentralized storage) and its sales policy, internal stock transfers might also be necessary.
The stock transfer with delivery is a plant to plant scenario. You are posting a goods issue in plant BP02 and a goods receipt in plant BP01.
This type of stock transfer can only be carried out from unrestricted-use stock of the issuing plant to unrestricted-use stock of the receiving plant.
You post the placement into storage at the receiving plant in a second step. Only then is the event completed and the transferred quantity part of unrestricted-use stock.
Function List
The following functions are provided to support the J51 building block:
Creating a Planned Independent Requirement
Creating a stock transport order in plant BP01
Generating a delivery in plant BP02
Picking of the material and posting the goods issue in the delivering plant
Posting the goods receipt in the receiving plant
Key Points
The quantity posted from stock is first of all managed as stock in transit of the receiving plant. Only once the goods receipt has been posted is the quantity posted to the unrestricted-use stock of the receiving plant. This enables the quantity "on the road" to be monitored.
The transfer posting is valuated at the valuation price of the material in the issuing plant.
Delivery costs can be entered in the stock transport order.
Regards,
Rajesh Banka
Reward suitable points.

Can we give same Excise Group to two diff. Plant within same company code

Hi,
Can anyone please tell that whether we can assign same Excise Group to two different plants within the same company code in SAP.
Regards,

Yes you can use but, you shouldn't use same excise group for two different plants in one company code, if their physical location is different.
As many excise report are fetched on the basis of excise group, there it will show combined values for both plants, whcih may not be acceptable to exices authorities.
Regards,
Sachendra Singh

Material Extend Problem within same company code

hello all,
In my company there is one company code '1000' and TWO plant 'ABC' & 'XYZ'. problem is that when i extend the material in XYZ plant from ABC then when i change somthing in material view in any plant then it is getting reflected in other plant also. it is same hapening during BOM extend. can anyone please tell me why it is hapening? is there any solution for the same?
Regards saurabh.

Hi
Can you explain little more ? like what field you have changed?
If you change the fieldd which are specific to the client level then it will reflect in both the plant.
THanks/karthik

Stock transfer between two plants within same company code at price

Hello,
Hello
I have a scenarios. One plant is selling a part to other plant at a margin. Both plants belongs to the same legal entity.
How can I map this scenario in SAP?
What will be the cost of my part in these two plants?
What mechanism I would use to transfer the stock from supplying plant to the buying plant?
Your urgent reply is appreciated.
Thanks,

Hi Pream
You can do it through Intra Company STO, but in this scnerio the libility never gets generated to the receiving plant because it is transfer from one pocket to other. but you can always transfer the goods on the assessable valu. you have to maintain the ***. value in J1ID, then while bill system picks the same ***. value in UTXJ condition.
But if you want to salel at a margin then use SO-PO i.e. create PO from receiving plant and against sale order, do the delivery of the material to the respective plant.
I think this will help you.
In case of any qurty feel free to contact
Girish

Transfer within a company for zero value assets

Hi experts,
I am transferring zero value assets (no acquisition cost, no depreciation, zero NBV) from 1 business area to another business area, therefore use tcode ABUMN (Transfer within company code) with transfer variant 4 (Transfer within a company code).
However, the transaction is not able to take place with the following error message:
"Retirement/transfer on asset xxxx 0 takes place with no values."
Actually in performing asset retirement, the same message appear, but it is just information (yello) and could be ignored (transaction still go through sucessfully).
Is there any configuration that needs to be done in order to perform retirement and asset transfer without error messages? Is there anything i need to enter when doing the transactions?
Your sharing will be very much appreciated.

Hi Paul,
Thanks !
In this case, the old asset will be showned as asset retirement instead of intracompany assets transfer. Is there any way to do a transfer for this type of transaction?

Can Equipment No same for 2 Equip in different Plants of same company code?

Hi Gurus,
            Please tell me if there is any possibility of having same Equipment No for 2 Equipments in Different Plants.
            The 2 plants are in the Same Company code.
            e.g. Equip           Plant                Company Code
               1) Equip_DIE    Plant1              A
               2) Equip_DIE    Plant2              A
           If it is possible how the Equipment histroy and Breakdown history is updated in the PMIS.
           Also tell me the advantages and Disadvantages of keeping same Equipment no for 2 diiferernt Equipments or otherwise keeping different equipment no.
With best regards,
Narendra Dere

Hi Pete ,
          Thanks for your valuable reply.
          Actually I am doing implementation for 5 plants within same Company Code.
          They are geographically distant (say 50km from each Other.)
          The Finish Product is same but the method is different.
          They have already assigned some Equipment Numbers in the Plant for Regular Maintenance Activities.
          Since Planning and Maintenance can be done at the different Plant and team of the MAintenance is different, they dont hv anyproblem if equipment number is same. Otherway they wll have the added advantage that they can continue with there own Equipment no which can be same in differnt Plant.
       e.g 800TONPRESS - Plant1
            800TONPRESS - Plant 2.
   With best regards,
   Narendra Dere

Transfer with in same Company code with a fixed mark up

HI gurus,
here is the situation ,we purchase some unlabelled packing materials form vendor in the distribution center , then pack them up into many smaller packages with our own label , after that ,the DC transfer packed material to store for sales .
the requirement is that ,we want to manage both the stock of raw material and goods for sales in different article number ,and when doing the tranfer posting from DC to store ,the cost of package material can be included in the transfer cost of sales goods,additionally with a fixed mark up. BTW , the DC and store belong to same company code .
any suggestion?
thanks in advance !
Edited by: deyi chen on Jul 1, 2010 9:21 AM

Dear Friend,
your scenario look like STO within company code
you can achieve your requirement by
Mark up or by paking scenario if you use packing scenario you can use that item category is relevent for pricing and you can add packing charges into your main product pricing
your SAP termilogy shows you are working on SAP IS Retail

Stock transfer order between 2 plants in same company code

Dear All,
We have the requirement, where in the stock tranfer order (between 2 plants in same company code) instead of Material valuation price, MAP/Standard (depends on Price Control) gets picked up from supplying plant ,user should be able to enter its own price while creating stock transfer order.
For fullfilling this requirement, I have created new condition type(where i have changed condition category from internal price "G" to "H" - Basic Price)
Instead of using condition type- P101 in the stock transfer pricing,I have used above created new condition type, in pricing procedure then also while doing the post good issue against the outbound delivery( move type-"641", moving average is getting picked up.
Can you please tell,where is the setting where we can make the system to consider manual given price while creating the stock transfer order instead of picking moving average price.
Its very Important requirement ,please Provide valuable Inputs else provide some alternative.
Thanks & Regards
Nitin Chhabra

Stock Transfer Order between Plants in the same Company Cpde are not relevant for pricing, as there is no billing. Billing only takes place between company codes. As same company code it would be like selling something to yourself - it doesn't make sense. The stock value in the receiving Plant depends on the price contol there. If standard price, then you must enter the price when creating the material or use material revaluation to change it. When you transfer the material from the issuing plant, the value there will be transferred. In case of standard price any difference is posted to stock transfer differences. If using MAP then the value will be transferred from the issuing Plant in full.
If you use costing with standard price in main plant, then it is possible that you can transfer the cost from the main plant to the second plant, by using special procurement key for costing.
Rgds
Richard

External processing in the plant as vendor under same company code

Hi friends,
In our project under implementation we have following scenario.
we have 4 plants under one company code. one of the plant does powder coating as manufacturing activity. Other 3 plants sends components to the powder coating plant for coating purpose.
In IDES Standard scenario of external processing, a purchase requisition is raised thro info record maintained for the external operation. This scenarion works if the vendor is external.
In our case, the vendor is one of the other plant under same company code/client. Also the powder coating needs to be done without any profit margin for internal customers.
Our FICO guys have the opinion that, intra plant can't be a vendor; because raising invoices among plants under the same company codes is against accounting standars.
If anybody has faced this type of scenario nd found the solution, Please share it here.
Thanx in advance

Hi Shiva
STO scenario
You can not create only STO as you need to send the unpainted components to another plant through SAP & have them painted back with only payment of paining charges without margin.
Subcontracting scenario
You can not create the Subcontracting PO as this is not your external vendor.
Does this involves excise?
Then the PR/PO ctreated should be of combination of STO and subcontracting. If so this is not possible, as item category is the only field in PR/PO that identifies it as STO and subcontracting. obiviously it cann't have 2 values.
My suggesion on this as...
Create a BOM for painted component with sp procurement key as produced in another plant(paining plant). this will have STO cretaed for paining plant. This will inturn cretae a production order in painitng plant.
The BOM in painting plant will have the unpainted component with sp procurement key as produced in another plant ( fabricated plant) this will have STO created for unpainted components.
I hope I am clear & not confused you much.
Regards
Mahesh
Regards
Mahesh

Stock transfer between two plants under the same company code at profit

Hello,
Hello,
I have a scenarios. One plant is selling a part to other plant at a margin. Both plants belongs to the same legal entity.
How can I map this scenario in SAP?
What will be the cost of my part in these two plants?
What mechanism I would use to transfer the stock from supplying plant to the buying plant?
Your urgent reply is appreciated.
Thanks,

Hi
To map this scenario, you should use Profit Centre Accounting.
Example
Matl XYZ is to be transferred from Plant 1000 to Plant 2000 at a profit.
Value of Matl XYZ in Plant 1000 is $100
Transfer Price: $120
From FI view point, there would not be any Accounting document as both Plants belong to the same Company Code.
From PCA view:
Plant 1000:
Internal Revenues Dr. 120
Stock                  Cr. 100
Profit Margin        Cr.    20
Plant 2000:
Stock                                 Dr. 120
Delivery from Profit Centre    Cr. 120
Effectively, the value of Matl XYZ in Plant 1000 remains at $100 and in Plant 2000, it is $120.
Hope this clarifies.
Thanks

Transfer of Inventory from One Plant to another with in the same company code

Hello All,
Can you please let us the possible option's for transfer of Inventory from one plant to another plant in different geographical location with in the same state.

PLANT TO PLANT TRANSFER IN THE DIFFERENT GEOGRAPHICAL LOCATION UNDER THE SAME COMPANY CODE
Assume - plant 1 - 1000 ; plant 2 - 2000.
From 1000 - 2000 u shall transfer the parts using 641 movement By creating a Stock transfer order with the following conditions.
1, Master & source list to be extended for both the plants vice versa. including accounting & excise view
2. Create an Sto po in ME21n for one time only /ME31N as scheduling agreement
3. Generate pick list and do Post goods issue in va02.
4. Create excise invoice & do the Gate entry in the other plant & stocks are up loaded.
5. In India excise rules are becoming stingent & you have to inform both the Excise ranges before starting the transactions

Consignment Process( site to site transfer within same company code)

Similar Messages

Maybe you are looking for