Consignment stock in an storage location for one customer

We have one procedure for consignment to customers. We create one sales order type KB (consignment fill up), and after receiving the material after creating PO and inbound delivery, we create the outbound delivery and then goods issue to send the material to the customer.
With the current procedure, we are not currently able to distinguish between the consignment for the sale and the consignment for maintenance purpose, as for a few customers, we want to keep the material located in one storage location created for that special customer so it appears in the inventory separated from the general current customer consignment. With the current procedure, once the GI is done, the material goes to customer consignment and does not appear in any storage location.
Do you know how we could create the new procedure?
Thanks and regards.

if we want to retrieve the material from customer consignment to unrestricted
Either you can create a consignment pick up and a return delivery or reverse the original delivery so that the stock would be increased in the parent plant.
For more details, check this thread
[Return consignment stock to blocked stock|Re: Return consignment stock to blocked stock]
thanks
G. Lakshmipathi

Similar Messages

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

Define Shipping Data for Stock Transfers Between Storage Locations

Hi Guru,
Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
Purchasing --> Purchase Order -->
Set up Stock Transport Order-->
Set Up Stock Transfer Between Storage Locations-->
Define Shipping Data for Stock Transfers Between Storage Locations

The Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
It is for the transfer of stock between storage locations with any movement type.
Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
You have to create a internal Vendor and Customer.
Hope it helps.

Stock in 3 storage location..

Hi Friends,
I have 3 storage location where I place stock. As you know that we have only one defualt storage location in Production Order. When system not able to find a stock at that storage location then it will create missing part list msg.
I would like system should pick the stock up automaticaly from another storage location, if stock in not available in default storage location.
I would appriciate, if you could write in steps to do config.
Thnks

Hi,
There may be requirement to withdraw the material from different stocks for goods issues and stock transfers based on some criteria or strategies. To meet this requirement in SAP we have stock determination strategies which determine how and when the material should be withdrawn, and from which storage locations and stocks. We can include the following stocks for the purpose of stock determination: unrestricted-use stock u2022 vendor consignment stock u2022 pipeline material u2022 sales order stock u2022 project stock.
Based on the stock determination strategy you define in configuration, the system makes decisions on material withdrawal depending on the material, plant.
Configuration
SPRO > Materials Management > Inventory management and Physical inventory > Stock determination
Define a stock determination strategy, according to which stocks should be reduced. Each strategy is determined at plant level based on a stock determination group and stock determination rule.
Assign a stock determination group to the material in the material master record.
Regards.

Need to display the Stock Values at storage location level - 0IC_C03

Hi All,
I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
I have no issues with quantities. Only problem with Values.
2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
I want to get the Stock Quantity and Stock Values at Storage location level in my report.
I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
Can any one faced the same situation, Please help me if so.
Thanks in Advance.
Gopal N

Hi Sachein,
I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
   What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information
Please let me know you need any more information.
Thanks in Advance
Gopal N

Re: Creation of storage location for halb which was not assigned primarily

Creation of storage location for halb, every thing processed with raw materials for production orders reg fert and even settled. Later a storage location is to be created for halb. When I created storage location for halb and when I want to post initial stock through MB1C I am getting error saying material type and storage location not maintained. Can any one solve my problem. Thanks in advance.

Hi Vachanala,
Are the material masters of your materials extended to the new storage location / have you defined automatic creation (for movement) in customizing (SPRO > Material Manegement > Inventory management & PI > Automatic movements > Create Storage Location Automatically)?
If the material masters are not extended you can't book those materials to that SL.
BR
Csaba
<b>material master</b>
http://help.sap.com/saphelp_46c/helpdata/en/ff/515ee849d811d182b80000e829fbfe/frameset.htm
<b>automatic creation of storage data</b>
http://help.sap.com/saphelp_46c/helpdata/en/a5/6330f243a211d189410000e829fbbd/frameset.htm

Unrestricted Stock of issuing Storage Location in reservation

Hi Experts,
We have a requirement, we want that unresticted stock of issuing storage location is printed on reservation (MB23) Thru MB25.
How it is possible.
Kindly help me out, can we use sqvi or something else.
Regards
GR

HI ,
Just Modify this Report with the help of a Abaper and ask him to add an additional column in the report that is the Stock in the unrestricted use for this Material and Plant
combination.
TO achieve the Since we know the Material ,plant and storage location
PIck up the Material Number --RESB-MATNR
the Plant code --RESB-WERKS
the storage LOcation--RESB-LGORT
Go to Table RESB table in this table against the Feilds RSNUM -Reservation NUmber and RSPOS( Reservation item number)
IN some cases the storage location would not be entered by the user ,take care ,he enters the storage location by every user ,so make it mandatory in the screen layout.
After Picking up all the three values ,pass those values in the Table.
MARD line item vise present in the reservation (maintain a loop for the same)
in this table pick up value in the Feild MARD-LABST which is the stock in the unrestricted use.
one thing ,i dont know the exact requiremnet ,but it is to resrict the user from creation of reservation more than the stock ,it can be done by avaliability check.
hope so it helps
Regards
Anjanna.

Stock Transfer between Storage Location with Order

Dear MM experts,
I am into SAP SD.
Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
Can you please suggest on how to achieve the above scenario.
Thanks,
Jignesh Mehta
Mumbai

hi
Stock Transfer between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
refer following
http://sapfunctional.com/MM/StockTransfer/Configure.htm
http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
regards
kunal

Storage location for 331 movement

Dear All.
Is it possible to assign storage location for sample usage movement in UD inspection lot stock tab. our requiremnt is through lot post material by 331 movement to Scrap storage location.
Regards.
dev123

Hello Dev,
Not really!
By 331 movement stock reduces from system.
Storage location is required for those movement types for which stock is either stored or transferred from one location to another.
What you can do is, you can transfer this quantity to block stock instead of sample usage. Later you can scrap this by 555 movement.
Regards,
Anand Rao

Stock removal from storage location

Dear All,
System showing some stock at various storage location, but whic is physically not in location. Every month balance sheet this stock is shwoing.
Please explain me any how to delete this stock from those storage locations.
Thanks in advance.
Thanks & Regards,
Krish

Hi sap gurus,
there was an production order xxxxx for a machine. so all the materials was booked for that order. then , suddenly the requirements changed. so, they stopped the order n used the whole material for another similar order. any extra material needed 4 the new production order was added to the new one and closed the new order. But, they hav not sent back the materials for the old production order. It has resulted in over valuation of the stock-WIP. i/e., there is a machine worth 15 lakhs on the system virtually. wheras in reality, physically, the machine doen't exist.
Now, the issue is if u want to reverse the work in progress on 31.03.08, will the system let us do (i.e. can we reverse a WIP on a previous date??). if so, pls suggest the complete procedure including Tcode's to use.
Thanks
Pavan

Can I assign several physical storage locations for each virtual machine when using the replication-feature from Hyper-V 2012 R2?

Hi everyone,
I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
on different physical disks to have them not slow-down each other in case of intensive disk accesses.
So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
Thanks in advance.
Cheers,
Sebastian

Secondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform. Lastly, you could copy the vhd file to a different location
before starting the VM.
.:|:.:|:. tim
Hi Tim,
thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
2x physical machines carrying severel HDDs
8+ VMs spread to run on the 2x servers
when setting up replication I can only set the storage-location from server A on B and vice versa B on A
Thanks again for your reply.
Cheers,
Sebastian

Automatically creation of storage location for material, in MF60

Hi all,
my collegue of PP module uses MF60 transaction.
When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
Why MF60 does not respect this requirement?
If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
Is there something more that I have to do?
Thanks in advance!
Best regards
Alba

Thanks a lot...
the note says:
Summary
Symptom
A material without storage location view exists.
If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
Additional key words
OMC3, XLAUT
Cause and prerequisites
All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
Solution
The system behaves correctly.
Header Data
Release Status:
Released on: 07.07.2000 22:00:00
BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
AND if doMF60 (that does mouvement 311), system does not create automatically the storage location?
Best regards
Alba

Block Storage location for particular material

Hi,
We gave defined storage location for finished product as follows>
1050 - 2-8°
1040 - RT
When I have created one material, wrongly i have created it in 1050 instead of 1040.
Then i have extend that material to 1040. Now that material is showing both storage locations.
Is it possible to block storage location 1050 for this material only?
Because of both SLOC thre are chaces of wrong receipt in 1050.
Pl. help me to solve this problem.
Gkude

Dear Mr. Kunal,
I have flagged storage location for deletion but till for this storage location system allows receipt also system allows stk. transfer in this location.
Pl. help me so that storage location is permanently deleted from the material or system not allow for GR.
Hope for your reply.
Gkude

Exclude stock at a storage location from the Productionn Planning run

Hi,
We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
Please suggest a way so that it is excluded from the Production planning
Regards,
Sireesh

Hi Sireesh,
Please try these following options.
1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
2) Try anyof these user exists
APOBP011 Enhancement for Stock BAPIs (BUS10504)
APOCF011 Inbound Processing: Stock
APOCF027 Customer-Specific Enhancements: Stock
3) Exclude the category from the ATD receipts category group maintained in the master data
Regards
R. Senthil Mareeswaran.

Stock transfer between storage location in IS -Retail

Hi,
I want to have a Stock transfer order between two storage locations in the plant.
I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
Tnx
Lior

Hello Lior,
in Retail your distribution center is a vendor and a customer, and your store is a customer. Therefore when you create master data for your distribution centre and store, you also create the vendor and customer masters that are required.
By this link of the DC / Store to the customer master the shipping data is derived. I hope this answers your question.
If you have further queries related to this, please do post them.
Regards,
Smitha

Consignment stock in an storage location for one customer

Similar Messages

Maybe you are looking for