Consignment Stock Issue

During Consignment Issue Order creation even though stock is available for Customer, system is neither confirming the stock nor generating schedule lines. I am sure that sufficient stock is available under Customer Consignment. I have calculated from each consignment issue order how much is issued and compared against consignment fill up stock. Please let me know how to fix this issue.

hw u solved the problem

Similar Messages

How to Handle Returns of Vendor Consigned Stock Issued via Delivery ?

Hi.
I am currently able to issue Vendor Consigned Stock via Delivery. I use Lean Warehouse Management, and I have implemented Stock Determination Rule to take Vendor Consigned Stock and Unrestricted own stock in account during Issue. I am even able to insert the correct Vendor Number during the confirmation of the Transfer Order. When I generate the Goods Issue of the Delivery Order, I get an accounting document that affects both the Account Payable Liability and a Consumption Account.
Now My Question is this :
How do I handle Customer Complaints that lead to a Return of the Goods, back into Vendor Consigned Stock ? The goods that is returned, needs to be taken back into Vendor-Consigned Status, and a appropriate Accounting Document needs to be generated to reverse out the Acct Payable Liability and Consumption Account entries.
Do I use a Returns 'RE' Sales Order to bring back the Stock ? I need to be able to create a Return Delivery that will immediately post the returned Stock back into Vendor Consigned Status. So where and how can I key in the vendor number in the Return delivery, keeping in mind Return Delivery in Standard SAP does not use Warehouse Management ?
regards
Peo

Hi Edmund
I think you can try the following:
1. Define a new schedule line category - here you can define the movement type and the item category (as given in a Purchase Info Record). - Transaction VOV6
2. Define a new sales order type for returns. - Transaction VOV8
3. Define a new item category for the returns document, - you can mention the special stock type here too
4. Carry out the sales order to item category and item category to schedule line category assignments.
I am not sure if the system will prompt you to provide the vendor number or how does it populate the vendor no. while posting the material doc. However you can try this out and check if this solves your issue.
Reward points if you find this helpful

Error while issuing goods for costcenter from consignment stock

Hi Experts,
material is available as consignment stock. Now while trying to issue the consignemtn stock to Cost-center by 201-P, i'm getting the below error,
pls explain to solve the same
Fld selectn for mvmt type 201 / acct 40200000 differs for Vendor goods movement (014)
Message no. M7093
Diagnosis
Comparison of the field selection strings from movement type 201 and G/L account 40200000 has revealed that there is an incompatible field selection combination at one or more points.

Hi
Please change the Special stock indicator to K & still if you get the error then do as below
Please do as below
T.code SE38 Program RM07CUFA,Execute
Enter movemnt type 201,
Company code
G/L account - 40200000
Execute
Now change the filed selection from required to optional for the field Vendor goods movement, this field is under field group Materials management.
This will Make the Movement type & G/L account compatible.

About goods issue from vendor consignment stock

Hi, I meet some issue needs your help!
The outbound delivery needs to post goods issue from vendor consigment stock directly. then how to choose which vendor's
stock for this delivery base on the actual process?
thanks
Best Regards,
Rory

Hi
In R3 it is not possible
If say material X is 100 units lies in your premises the vendor consignment stocks (the vendor property lying in your premises ) and out of that 100 units if you are making a sales order and then a goods issue means it is not possible
To sell that material you need to make it your own stock ( that is transfer from vendor consignment to your own ) as good as buying that stocks and then sell it
But the same scenario is possible in IS retail
For this iS retail server is reqd
In Retail you can play with vendor consignment stocks as much as possible without making our own stocks
You can search SAP library regarding the settings of the same
http://help.sap.com/erp2005_ehp_04/helpdata/en/c6/af3c415e5dde2be10000000a1550b0/frameset.htm
Regards
Raja

Goods issue from vendor consignment stock with freight charge

Hi Experts,
I have a typical scenario for GI from consignment stock with freight charge.
The consigment price is agreed of the material is agreed between the vendor and the client. The vendor buy the material and use the company/client shipment.The client carry the vendor material in their shipping. The fright charges was not included in the consignment price. Presently they accumulated the vendor frieght charge in a separate account.
When the user raise a reservation and goods issue was done from consignment stock Info record price of material for the consignment + 8% of the price of material should be charge to the user.
And the 8% of info record price of the consignment material should be posted to freight recovery account.
So there is no balance between the freight charges account and the freight recovery account.
Can you suggest who we can mapped this process?
Regards
DP

Hi DP,
As SAP doesn't Support Delivery cost settlement with the consignment process to seprate G/L ( Similar to accruals ), you need to go for Z development which while posting MRKO will be executed with refernce to PO & Issue Document Posting the freight Value to Appropriate fright G/L .
Regards
Manish
Edited by: Manish Kumar on Nov 3, 2010 12:06 PM

Goods Issue in SD delivery (from vendor consignment stock)

Hi, all.
I'm trying to make a goods issue in SD delivery from a vendor consignment stock (movement 601K), but the system gives me an error message M7071 - I have to enter a vendor at item level, but where? And if I have a stock determination strategie, why the system needs the vendor, if I have stock K available for a vendor?
Please advise.
Thanks,
HA

Hi Helena Maria,
I think you have made some mistake in the movement types in the consignment processes..
just go through this and its easy to remember...
<b>Please reward if this is useful for you..</b>
1. Consignment fill up:
Sales document type is KB
Item category KBN
schedule line category 1
In this step, you are not invoicing the customer. document flow is sales order -
delivery item category. It will not be relevant for billing and pricing because you are not charging money for these goods in this step.
In schedule line category, you will set movement type 631 & set for availability check and TOR.
2. Consignment Issue.
Once the customer informed you that he used all the goods or partial goods then you will create consignment issue for used goods.
Sales document: KE
Item category: KEN
schedule line category: C0 or C1
Here you are invoicing the customer(because he used the goods). you are assigning the delivery document and billing document to the sales document.
In item category, you are setting relevant for billing, pricing, special stock.
In schedule line category, your setting is 633 movement type, relevant for availability check & TOR.
3. Consignment Return:
Customer found that some goods are damaged or he not able to sold the goods he want to send it back. that you are creating this document.
Sales document type: KR
Item category: KRN
You will assign delivery document and billing to sales document. you will create return order, return delivery, return billing.
Your setting item category relevant for billing, returns, pricing, special stock.
Your setting schedule line item category: 634 movement type, NO availability NO TOR.
4. Consignment Pick up:
Even if you create the consignment return the goods are not come to direct to your plant. For that you need to create consignment pick up. here the owner ship is not changing so you do not need to create billing.
Assign return delivery to sales document type.
Sales document: KA
Item category: KAN

Consignment Stock movements in ORT_C37

Hi Experts,
I am working on BW IS-Retail implementation. In my project for stock information, we are using 0RT_C37 infocube. But I am not getting the consignment stock material movements in my report. Please let me know how to get the consignment material movements in 0rt_c37 infocube.
Any enhancements required for 2lif_03_bf infosource. I saw the consignements stock movements in 0IC_C03 cube. But I am using 0rt_c37 cube for retail values.
Please help me out from this issue.
Regards,
Chandra

Hi
There are two option for u
First option is...you can update the same cube with another infosource and updat rule to feed the data into the cube and get the consignment stock detail
this should not affect the data consistency or granularity of the cube....
Second option is..as already said create a multiprovider or infoset depending on the report...if u feel joins wil be useful go for infoset query or union condition is sufficing ur report requirement go for multiprovider....
this should not affect the reporting performance as joins are done during runtime and may take some time to fetch
Regards
N Ganesh

Vendor Consignment stock or vendor managed stock

Dear All,
My client wants to manage vendor consignment stock.
Vendor will be given a area and vendor will keep the stock in his area. Based on the plan he will supply the stock.
the GR for rawmaterials will be made on the consumption report given by the production person. This activity will happen next day only. i will do the GR only to the quantity consumed.
for example if i consumed 100 qty, i will do GR only for 100 and vendor will issue invoice for 100. But when the vendor issue the stock, he will raise a excise invoice based on which i have to take excise credit. I want to know how to do the same.
secondly, i take credit for 100 qty, but actual consumption is 95 only, how do i reverse the 5 only excise invoice.
regards
ranga

No, it is possible to sell from vendor consignment stock directly and I have done it in ECC 6.0 (not IS-retail).
- Pls refer the note 607604.
- Establish the 'stock determination rule' in MM -> Inventory Management -> Stock Determination.
- You need to assign it to the material (MRP3 view) or assign it to item-ategory.
- DONOT mark the special stock indicator in item-category used in SD (e.g. TAN) with 'K'..I did this mistake and wasted some time. If you do, it will ask you to populate the Vendor field in the Delivery which is not available and you may get stuck up because of that.
This should make it work.
Pls award points if you find this information useful.
Regards,
Shripad

Request for help on Vendor Consignment stock and Customer Consignment Stock

HI Experts,
We have a requirement to segregate the Customer Consignment stock and Vendor consignment stock from the total Consignment stock available in the BW report.
Currently in the report the calculation of total consignment stock is based up on Issued consignment stock and Received consignment stock .
The calculations of the Issued and Received consignments stocks are specified below.
Issued consignment Stock
The below following parameters are checked when the quantity is considered as Issued consignment Stock
Transaction or Process keys : 100, 101, 104, 105, 106, 110
Application    :   MM
Stock relevance : 1
Adding to the above conditions,
u2022     When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock. or
u2022     When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock.
Received Consignment Stock :
The below following parameters are checked when the quantity is considered as Issued consignment Stock
Transaction or Process keys : 000, 001, 004, 005, 006, 010
Application    :   MM
Stock relevance : 1
Adding to the above conditions,
u2022     When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Received Consignment Stock. or
u2022     When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Received Consignment Stock
Only stock category and stock type are available in the BW report for determining the type of consignment stock . So, with respect to stock category and stock type, could you please kindly advise if it is possible to determine the Customer consignment stock and Vendor consignment stock in the report
Thanks a lot
Warm Regards,
Jeswanth
Edited by: jeswanth kadali on Jun 23, 2009 4:10 PM

Hi,
We can settle consignment goods to vendor through MRKO transaction.Even user transafers consignment stock to own stock through MB1B transaction.We can use same document to settle vendor through MRKO transaction.
What is implications of such Action (like Goods issue, 1 step transfer) on SAP.
Nothing will happpen after after stock converted to own stock.
Regards,
JS

T-code WV31 create physical inventory for vendor consignment stock

Hi all,
I have some issue with T-code WV31i n Sap Retail. Even though it supposed to create physical inventory doc for unrestricted use stock, it also create physical inventory Docs for special stocks (vendor consignment stock). What could be the reason?
Best regards
Sameera
Edited by: Sameera on Dec 23, 2011 7:07 AM

Hi,
If i do physical inventory for 2 quantity.
1. Consignment Payables account debited with 2 qty ( Now stock becomes 4 nos)
If i issue 4 quantity
2. Consignment Payables account credited with 4 qty.
If i do consignment settelment, it is setteling 4-2 (for 2 quantity).
But I want to settele for 4 quantity.
Thanks,
Maruthi

Vendor return process for consignment stock not yet own by you

Hello guru,
I need some help from you on the following type of vendor return.
We receive vendor consignment goods into our warehouse and we notice we would like to return back to the vendor after several defects
defect were spotted few month later, how to execute vendor return like this given that the stock still own by the vendor
in accounting perspective?
Should I just create another PO and flag the return indicator and perform a movement 161 in MIGO? Is this method workable way
of doing this?
What if we need a delivery document to be generated after 161 movements is posted in MIGO?
Appreciate it.
Tuff

Hi,
   The vendor consignment stock has no accounting impact till the stock is issued to own stock or consumed (411K or 201K movement).
   Standard SAP recommends to use direct return delivery using 122 movement in MIGO to return the consignment stock material back to vendor.
   If you still wanted to proceed with return PO, then maintain the message ME640 as warning message (W) in the path: OLME - Environment Data - Define Attributes of System Messages - System messages. Now, create a return PO and create GR against the return PO.
   If you want proceed with SD route for returning to vendor, refer the thread: Return PO with Text material shipping tab
Regards,
AKPT

Is there a way to create consignment stock without using a Purchase Order

Hi Gurus,
Is there a way tp created unrestricted consignment stock for a material without first creating a Purchase Order and then using MIGO. Is there a way to create directly into inventory?
Thanks for your help!

Hi Charlie/All,
Still having the same issue.
I checked t-code OMEV to make sure Consignment Info Record is activated
I checked the EINE table to verify the Infor Record was created for consignment
In MIGO I use the following:
Goods receipt - other - movement type 501K
material, vendor, qty entered
error msg: purchase info record not founf in purchasing organization??
not sure why..thank for all your help so far...

Integration FI-MM ( consignment stock) - Accounting entries & Movement type

I want to understand the integration of FI & MM from consignment stock account.
Scenario
In Tcode OBYC what pre-requisite are required.
1. In which transaction ( BSX) where Finished good stock Account (Balance sheet Account) in maintained.
2 In which transaction (????) consignment stock GL is menetioned.
3 In which transaction (KON) change in consignment stock account ( P&L Account) is created.
4 In transaction (GBB) maintenance of cost of good sold account (P&L account) is required with account group
Suppose i have 10000 Inr worth of finished stock. We issue goods of 4000 inr worth to consignee & incurring 1000 packing charges.
The consignee sells 2000 inr worth to final customer & The consignor should be paid commison 10% & 5% charges for maintaining stock.
Ten consignee returns 2000 inr worth of goods
Please tell what accounting enteries will be passed along with movement types.

FI-MM: The integration between FI-MM happens in T-code OBYC.
1. When PO is created :
No Entry -
2. When GR is posted
      Inventory Account dr (Transaction Key BSX in OBYC)
            To GRIR account (T.Key WRX in T-code OBYC)
3. When Invoice is posted
      GRIR account Dr.
      Vendor account Cr.
4. Payment made to Vendor
      Vendor A/c Dr
            To Bank Clearing A/c Cr.
Points to know : Movement Types, Assignment of Movement types to T-keys (T-code OMJJ), Value string (I also need some information on this) , OMWN and OMWB transactions.
There is a close integration b/w FI & MM, actually document flows from MM to FI in the following areas such as,
1. Movement Types:
Used to enable the system to find the predefined posting rules determining how the accounts of financial accounting system are to be posted & to update the stock fields in the matrl master data.(Goods Receipt, Goods Issue, etc)
2. Valuation Class:
Assignment of material to grp of gl account, used to determine the gl accounts that are updated as a result of goods movement.
3. Transaction/Event key:
Used to control the storage or filing of documents & assignment of documents.Used to differeniate b/w various transactions such as goods movement tht occur in inventory.
4. Material Type:
Each material should assign mtrl type in mtrl master record used to update whether changes made in qty are updated in material master record & change in value also updated in stock account.

Consignment Stock - Free Items - MM

Dear All,
Regarding consignment stock from vendor and handling free items with existing current stock.
We have 100 pcs consignment stock from vendor A.
As this stock issued time to time based on requirement and paid to vendor for the utilized quantity, now want to handle the below process.
Consignment stock : 100 pcs.
As per the vendor current offer - every 10 pcs 1 pc free. Now we have 100 pcs, so if we consider 90 pcs issued and rest 10 pcs as free - how to handle this in MM inventory and pay amount for 90 pcs only to vendor and remaining 10 pcs as free.
PR - PO - GRN created for 100 pcs earlier.
Please suggest the procedure to handle this in system.
Regards,
Syed Hussain.

Solved..... submitted for FI verification.....

Consignment Stock for Inventory Management

Posting as a new thread...
I have installed and loaded the Inventory Management Cube 0IC_03 in our development and quality systems. During testing we have found just one problem with Consignment Stock. The Stock Initialization (2LIS_03_BX) does not bring in an initial quantity (BWMNG) for any material flagged as a Consignment Stock (Stock Category = K, field BSTTYP).
My question - is there a good reason for this or is this a problem? It causes a problem with reporting, because balances are now off. Do I need to change how reporting is done for Consignment?
It seems to me that the BX extractor should be picking up the initial balance. I am trying to debug the code, but am getting a headache!
Any help would be appreciated!
Yes, I have reviewed the "How To..." documentation, but don't see anything regarding consignment stock.
We are at BW 3.0b Support Pack 25.
Lisa.

Thanks, Ken. I don't know that this note actually helped me, but I did another review of OSS notes. We have applied 3 of them (726485, 756151, 762219) and our consignment issue has been resolved.
Thanks for pointing me back in the right direction!
Lisa.

Consignment Stock Issue

Similar Messages

Maybe you are looking for