Consignment stock vs Unrestricted Stock in SAP APO

DC ( has vendor co location)   ------->     Tier 2 location ( garage)
can consignment stock (ECC) be considered for replenishment at Tier 2 location in SNP APO by Heuristics / optimizer?
to account for replenishment at Garages from the DC locations , can the consignment stock at DC be used ?
does Heuristics / optimizer consider it to propose transfer orders ?

Hi Ashfaq,
You can plan these stocks in APO by integrating it using CIF.
You can activate the transfer of vendor consignment stocks in the integration model by using the Storage Location Stocks indicator in the CIF integration model.
Make sure that the vendor master data must be contained in the same integration model as the stocks.
Cheers
Ajay

Similar Messages

  • Report for material moved from blocked stock to unrestricted stock

    Hi,
    Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
    Regards,
    Pratap

    It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
    Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

  • How to post return stock to unrestricted stock for only Plant & Material Type combination?

    Hello Everyone,
    At present, whenever the stock is returned then it posted through 655 movement type. So, material is posted as quality stock.
    Now, the requirement is to post the stock to unrestricted stock for Plant and Material type combination only. Which means, if the plant is 1413 and the material type is ERSA, VERP, and HIBE then for return sales order system post the stock directly to unrestricted stock, instead of quality stock.
    So, is there any standard way of configuring the above scenario without going for validation (Z Fields)?
    Regards
    Anwar

    Dear Mohammed ,
    as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
    as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
    follow the below logic to achieve your issue .
    you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
    wait for other experts solution , if any standard is possible or not  .
    Regards,
    C.B Reddy.

  • Posting of QI stock into Unrestricted stock (URGENT)

    Hi All,
    At the moment, we are posting QI stock into Unrestricted stock using MB1B with Mvt type 321. But the problem is we have to enter each material & qty manually, i,e, if a PO has 10 lines, i have to manually enter each material in the PO & then the qty. Is there any other transaction or way in which i can do this transfer posting with reference to the PO, thereby the system automatically puts the lines in that PO & i can then delete the material or modify the qty if it has not passed QI check.
    I tried in MB1B with Mvt 321 by creating with reference to PO, the system prompts an error & says not possible.
    Hope my problem is clear, await inputs.
    Vivek

    Hi Aasif,
    As mentioned by you i have done the settings.
    1. If i enter the mvt. type 321 in MB1B & then click on create w/ ref to PO, i still get an error.
    2. But if i just enter the mvt 321 & enter inside MB1B, there i now see a field called Purchase order. But if i enter the purchase oder number here, the materials inside this PO are not automatically displayed, the screen just becomes grey.
    What i actually want is, when i enter the PO number, the materials should be displayed, which would resolve my issue.
    Await your inputs.
    Vivek

  • Bapi to move Quality inspection stock to unrestricted stock

    Hi All,
    I am developing a report where the  material batches should be distributed  to other storage locations within a plant (as we do it in MB1B with movement type 311).But if that material is in QI stock( inspection lots) then that should be forcibly moved to unrestricted stock.Is there any BAPI available to mimick QA11 and force the material from QI stock to unrestricted stock.
    Thanks in advance,
    Pramod

    Hi Peter,
    The requirement is to mimick the transaction QA11.I am all ready using the BAPI_GOODSMVT_CREATE to post the goods from unrestricted stock.But,to move the stock under QI inspection I have to first move it to unrestricted stock and then post it.Is there any other BAPI available for mimicking the transaction QA11.
    Thanks,
    Pramod.

  • Posting from qm stock to unrestricted stock ........URGENT HELP NEEDED

    User created a Purchase order and posted it to qm stock.The inspection lot is created for the Purchase order with these status CRTD, REQ,CHCR,SPRQ. How do I post the stock from QM stock to unrestricted stock.
    in QE51N also it gives me an error saying "no selected entries found "
    I tried to change the usage decision in tcode:qa32 or qa12 but it is giving me an error not and  letting me change it.
    So my question is how do i post the stock to unrestricted stock .Please can someone explain with detailed steps.
    thank you

    Devang,
    Check the following points
    1. Check if inspection plan is assinged to inspection lot, if inspection plan is not assinged. Assign inspection plan to material and go to qa02 & calculate sample size.
    2. Check if more than one inspection plan asssinged to material , it mutiple inspection plan assinged to material , you need to manuallly assign the inspection plan to inspection lot and calculate sample size.
    Sanjay

  • Releasing stock from return stock to unrestricted stock

    Hi all
    Can anybody tell me how to move the stock from return order stock to unrestricted stock so that goods which is been returned from customer can be sold to another customer?
    Regards..,
    Karthik

    Hi,
    If u want to post the stock to ur own location for future use u can use
    MB1B transaction and with movement type 453 you can post it
    hope it will help
    regards,
    santosh

  • Pointers Needed on Movement from Blocked Stock to Unrestricted Stock !

    Hi Gurus,
    I have a scenario wherein I need to take care of "Movement from Blocked Stock to Unrestricted Stock using Movement type 343 and in the next step need to do Material to Material transfer using movement type 309"
    My Query is:
    1. What does it mean when we say Movment from Blocked stock to Unrestricted stock ?
    2. What does it mean when we say Material to Material transfer ?
    Please help me with pointers on finding a BAPI to do the above stock movements or material to material transfer.
    Many Thanks,
    Madan

    Hi,
    Please help me with pointers on the mapping parameters for this BAPI.
    Here are the details which I am using, but gettin error message -
    T ID                   NUM MESSAGE
    E /CWM/MM              001 Transfer the parallel entry quantity/entry unit of measure
    I have filled below fields:
    GOODSMVT_HEADER
           PSTNG_DATE                   11/25/2009
           DOC_DATE                       11/25/2009
           PR_UNAME                        MyName
           HEADER_TXT                    TEST
    GM
    04  (Transfer Posting)
    GOODSMVT_ITEM
               MATERIAL                       100001374
               PLANT                          1AAE
               STGE_LOC                       B100
               BATCH                          0111331309
               MOVE_TYPE                      343
               ENTRY_QNT                                10.000
               ENTRY_UOM                      EA
               ENTRY_UOM_ISO                  EA
               MOVE_MAT                       100001374
               MOVE_PLANT                     1AAE
               MOVE_STLOC                     B100
               MOVE_BATCH                     0111331309
    Need your help to resolve this.
    Many Thanks,
    Madan

  • RE: Conversion of Restricted stock to unrestricted stock

    Hi All,
              After PO when the stock is posted to storage location the stock is posted to restricted stock by default, where batch management and classification is involved. I want to know why the stock is posted in restricted stock or at least I want to know to convert restricted stock to unrestricted stock.

    Hi,
    If you want to change the batch status from restricred to unresticted use you can do in MSC2N
    If you want to change the configuration to select Unresticted use goto
    SPRO > Logistic general > Batch management > Batch status management > Activate Batch Status Checking in Warehouse Management.

  • Blocked stock to unrestricted stock in wm

    Dear all,
    i want to move the stock from blocked stock to unrestricted stock in WM.our issue is there is no stock availability of Blocked stock in IM.
    Is there any manual transfer available in wm for the same. what could be possibilty for the above issue.i.e stocks available in wm not in IM.
    Kindly guide me
    Regards,
    velu

    In WM
    Posting change from blk.to un rest.
    1) LU01- MOV TYP 309,
    2) LT05
    Question?
    A)have you already done the transfer posting in IM? otherwise where is the stock in IM and why it is available in WM?
    b) If you have already done in IM try to find the mat. doc?In the mat.doc you see in the WM View posting change number,enter the posting change number in LT05 !
    If not solved pls check LS 26,let me know the Stock status...
    Regards,
    eswarmanu...
    Edited by: eswarmanu on Nov 18, 2008 6:40 AM

  • Transfer of on-order stock to unrestricted stock

    Hi gurus,
    Could any of you please tell me. I want to transfer on-order stock to unrestricted stock.
    Regards,
    Abhik

    hi
    i think there wont be any Purchase order stock.
    tell me one thing where the stock is lying now.
    if you created the PO, then you need to do the Goods Recipt against the Purchase order document  i.e from t-code MIGO movemnt type 101.
    -ashok

  • Change of Production Order to Project Stock from unrestricted stock

    Hello Experts,
    I need to have a workaround of transaction CO02. Actually, we have already implemented PS by using Project Stock but the problem is that we have almost thousands of production orders  that will come into unrestricted stock after production. For these orders we want to make an account assignment for a project and we want that MRP to see all these production orders as entering project stock after production. If I do the same by CO02, it is very difficult for me to do it individually for each production order. So, is there any way to configure our need for passing from using unrestricted project stock to project stock ?
    Thanks,
    Kumar Srinivasan

    Hi,
    Then try implementing the following logic. Not sure if this can help you.
    Use a material that is set up to trigger the production order and attach this material to a network activity that is set to be reserved for project stock Q and can only be GI to that WBS element. The planned costs are recognized in the project but the Actuals are only recognized when the finished material is GI back to the project. You can use your planned production orders and MRP in exactly the same way but they are just linked back to the project when they are completed.
    If you need to transfer planned orders that are already in place then it can be done in MM. There’s a goods movement type specific to where you need to reference the WBS element that is set for requirements grouping.
    Regards,
    Amit

  • Blocked stock to Unrestricted Stock

    Hi All,
    How to Convert Blocked Stock(Movement type 651) To Unrestricted stock(Movement type 653)
    Post Goods Receipt is done with Movement type 651 now i want to change its movement type to 653
    Regards,
    Amol

    The TE keys assigned to this movement are GBB & PRD.
    In this case i believe it would be GBB with modifier VAX.
    I am not fully aware of the Indian acctg. procedures, so hence kindly work with your FI/Co personnel.
    But from logistic point of view, this is the movement to be used.
    Regards,
    Vivek

  • RE: VELO Return blocked stock to unrestricted stock

    Dear experts.
    I have a situation where once again i would appreciate any help.
    We are doing returns in VMS for an automotive company. All my code is working and my program creates a return, return delivery, goods reciept and credit memo in vms.  My problem at this stage is when i try to move this vehicle from blocked stok to unrestricted stock (Action REUS) the Bapi returns with a message complaining about a notification class. However if i run transaction velo for the exact same vehicle and try to do action REUS the log tells me that the account requires an assignment to a CO object.  I can however not just include this in config as our FI consultant says this would influence all movements into and out of this account.  I need to code it into my program.  And pass the profit centre to the bapi.  I am using BAPI_VEHICLE_CHANGE_MULTIPLE but can not find any place to pass the profit centre.
    ANY HELP?????
    PLEASE.
    Kind Regards

    Hi Griphen
    I think that is a CO configuration problem, VMS donu2019t influence the determination profit center , ask: you are returning the vehicle at the same plant?
    Best regards
    Pablo Aguila

  • QM stock to unrestricted stock

    Hi Gurus,
    My scenario is by doing MB31, 101 stock will be posted to quality. After it is accepted it should be posted to unrestricted use stock automatically.
    After results recording and usage decision, if the inspection lot is accepted then is it required to move the stock from quality to unrestricted stock or is there any setting which will make the automatic movement of stock from quality to unrestricted use based on usage decision.
    All responses will be rewarded.
    Thanks and Regards,
    Prasad

    Use QA02 to look at the status of the inspection lot.  More then likely it is in CRTD status which means created.  It must be in status REL (released) in order to record results or make a UD.  Chances are it is looking for a plan (PREQ).  If it is you must create an appropriate plan.
    Once you get to the UD, for auto stock posting you select a UD code that has been set up to do this.  You do this in QS41and QS51.  Use QS41 to create the group codes in catalog 3.  Use QS51 to create the selected sets.  For each code used in a selected set, you can specify the stock posting.  By clicking on the tick mark in the column "stock screen" you are telling the system to make the specified posting automatically in the background when the users saves the UD.  They do no need to go to the stock posting screen at all.
    Craig

  • Customer returns blocked stock to unrestricted stock

    Hi,
    we have a customer returns stock in blocked status and we want to put it to unrestricted stock. how do we do that? we have 4 EA in the plant and sloc
    Thanks
    Anusha

    Hi
    For sales returns of customers which is represented by return sales order RE has schedule line category DN in that if you mention movement type as 653 in the schedule line controls fronm the SD side in VOV6 the stocks will go to unrestricted straightaway
    If this process is used there is no need to use MB1B t code at all
    Regards
    Raja

Maybe you are looking for