Consignment without Deployment and TLB

Hello ,
We currently have DP and PPDS implemented in our system , we are planning to have consignment scenario implemented where the customer sends in the forecast to APO DP .
1) How would the process be if we do not want to implement SNP,Deployment , TLB . Can we still go ahead and implement it . How would the process be . The help document says that once the TLB shipment is sent to ECC an Consignment order is created , but in our case we do not want to implement SNP , Deployement , TLB can we still be able to do it .
Regards,
Nick

Thanks Senthil
We did try with the first option.. Fair share rule "A", But if we deploy based on the demand of the destinations and other destinations with lower demand would be left over. Our business works more on serviceability.
with the second option, As per my understanding Push by distribution is when demand < supply, so that we can push the supply. In my case the demand > supply.
Fair share rule "B" is working fine and Deployment is carried out at SKU level and when a TLB is run it can collate all the SKU for the specific destinations and form a truck.
I would need to perform the steps as per my earlier post. Could you suggest any customized developlment required this??
Regards
Nav

Similar Messages

Deployment and TLB from DP BOM POS

Hello Masters of the Universe ......
I have a question ....i am using DP BOM ... after i have the demand for dependent products i am using a macro to calculate safety stock and net requirement ....
After i have the net requ calculated it will be necessary to create a purchase req or stock transfer req .... it is possible to create directly from the DP BOM área using the deployment and TLB?
I was trying to test but the system not allow to create a Planning Book with Deployment and TLB flags whem you are on a DP BOM POS but it is possible if i am using a SNP relevant POS.
Some one can help me please ?
Thank You ALL

Hi Geovana Juliani ,
Can u check whether materials/components you have use are create in APO as location-product master data and already assigned to model 000?
Check the date also.
Thanks,
Nikhil

Deployment and TLB

Dear All
Requirement : We run deployment using fair share rule "B" followed by TLB with truck capacity defined.
Since it deploys the stock based on the target stock levels and distributes it proportionally, sometimes we face problem when the stocks get deployed to destinations but not able to form an STO since it doesn't satisfy the TLB rule. This impacts, stock not to shipped and constraint in storage at location
Can it work as below??
1. Deploys based on fair share rule "B".
2. Tries to form a Truck ( TLB)
3. If truck not formed , then re deploy the stock based on other logic (say priority)
4. Then form a truck (TLB).
At least in this case.. STO's are formed for some destinations and stocks can be shipped out..
Pls provide your expert comment ...
Regards
Nav

Thanks Senthil
We did try with the first option.. Fair share rule "A", But if we deploy based on the demand of the destinations and other destinations with lower demand would be left over. Our business works more on serviceability.
with the second option, As per my understanding Push by distribution is when demand < supply, so that we can push the supply. In my case the demand > supply.
Fair share rule "B" is working fine and Deployment is carried out at SKU level and when a TLB is run it can collate all the SKU for the specific destinations and form a truck.
I would need to perform the steps as per my earlier post. Could you suggest any customized developlment required this??
Regards
Nav

Import .par file into NWDS and Rum it without deploying ?

Hello All,
I'm new to the NWDS and the Portal.
I've many Qns on my Requirement. Hope u guys can help me out in resolving my Issues.
Is this the right forum to place my Query ?
If not then please let me know the right forum .
My Requirement is like this :-
1. I need to create a Portal Application which calls an URL.
2. But before developing this, my Client gave me one 2 options :
a. He gave me a par file and asked me to make changes in it.
b. Create a new Portal Project which calls the URL ( Predefined ).
3. I wanted to check the 1rst option i.e " a ".
4. I tried to Import the .par file into NWDS like this :
* Windows --> Open Perspective --> Enterprise Portal .
* File --> Import --> Par FIle.
* I gave the name of the Project as PortalLogon.
5. I searched in the forum on this scenario and I found that the libraries for this project are not automatically imported.
A .Can any one tell me how to import the libraries and which are all the libraries to be imported ?
B. How to test my PortalLogon Project without deploying ?
Is it possible to test this Project without deploying ?
If yes can anyone tell me hoe to do this ?
Regards,
Deepu.K

Hi Deepu,
Usually Server will be having all the jar files and If you want to deploy your par file using NWDS you need to give a path to your Jar file location.
So better download all the jar files from your server and keep it in your local desktop.
Create a new folder called "JarFiles" in your desktop and keep all of your jar files inside.
Download Jar finder from IBM Site ( search for "Resolving Java Classpath Issues" in SDN ,you will get a pdf and follow it.).Add it as a plugin to your NWDS path.
Restart NWDS.
Now you can resolve the jar file issues.there are many weblogs /articles/forum QAs regarding this.
If u need more clarification,please let me know.
Thank you.
Regards,
Karthick Eswaran

Import .par file into NWDS and Run without deployment ?

Hello All,
 I'm new to the NWDS and the Portal.
I've many Qns on my Requirement. Hope u guys can help me out in resolving my Issues.
My Requirement is like this :-
1. I need to create a Portal Application which calls an URL.
2. But before developing this, my Client gave me one 2 options :
 a. He gave me a par file and asked me to make changes in it.
 b. Create a new Portal Project which calls the URL ( Predefined ).
3. I wanted to check the 1rst option i.e " a ".
4. I tried to Import the .par file into NWDS like this :
* Windows --> Open Perspective --> Enterprise Portal .
* File --> Import --> Par FIle.
* I gave the name of the Project as PortalLogon.
5. I searched in the forum on this scenario and I found that the libraries for this project are not automatically imported.
A .Can any one tell me how to import the libraries and which are all the libraries to be imported ?
B. How to test my PortalLogon Project without deploying ?
Is it possible to test this Project without deploying ?
If yes can anyone tell me hoe to do this ?
Regards,
Deepu.K

hi Deepu,
for simply displaying a URL, you can use the commonly available URL iView.
your folder->new->create iView->iView from template->URL iView and then enter your URL
for the other think.......
you can create an iView from PAR file.
your folder->new->create iView->Iview from PAR->then select your PAR and create an iView for that.
and the last one.......to see the effect without deploying it on the portal......refer the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0e240beb0702ae10000000a155106/content.htm
and the usual libraries to be associated are
htmlb.jar and
com.sap.portal.htmlbbridge.zip
Cheers........

How to deploy and run EJB in eclipse without XDoclet

Hi Friends
I am new in j2ee.In my academic project i want to do some ejb programming.
For that purpose i want to write some ejb's.I have written all required class for ejb,created ejb-jar.xml file manually,weblogic .xml file manually. I am using weblogic8 as an server for deployment.
I know deployment with xdoclet but i want to know hoe to deploy ejb without xdoclet.
If u have saple code or useful link regarding this please send it as soon as possible.
Thanks in advance
How to deploy and run EJB in eclipse without XDoclet

HI Welcome to J2ee...
I am also new to this...But i ll share my ideas with you...
In EJB 3.0 No need of any Deployment Descriptors....
And If you are using Eclipse You can Deploy(as jar) using Export in File tab...
XDoclet is not mandatory...
Gopal V

How to call a class file in a jsp without deploying anything in j2ee

Hi,
I am new in J2EE. I have some jsps, which I configured using web.properties(documentroot=c:/jsp/). I am able to get
those pages by the web browser. I have some import statements in some jsps, now I
am trying to access those page but it is failing, it says
org.apache.jasper.JasperException: Unable to compile class for
JSPD:\j2sdkee1.3\repository\pradip\web\_0002fLogin_0002ejspLogin_jsp_0.java:1:
Class com.gui.UPMGuiGlobalConstants not found in import.
import com.gui.UPMGuiGlobalConstants;
Actually I have not deployed any class file or jsps.. Now my question is can I access
these jsps without deploying anything, like can I put my .jar file in any j2ee
directory(like lib or anywhere else, I already tried after putting in /lib) and restart the
j2ee and use it. So how can I call a class file from a jsp without any kind of
deployment?
Please send me the reply as soon as possible.
Regds,
Pradip

After you put the jar containing the class to import into the WEB-INF/lib directory, you still need to include it in the jsp.
Putting the jar into the lib dir, will make it available to the vm, but as in any other java class, you still need to import it into the class, that the jsp will be compiled into.
And you do that by putting
<%@page import="com.gui.UPMGuiGlobalConstants" %>somewhere near the top of your jsp. (well you don't need to put it there, but it good style ;)
That should do it.

Is there a way to preview the dissing of the pages on OAF without deployment ??

Is there a way to preview the dissing of the pages on OAF without deployment ??
Hi to all,
I´m recently working with OAF and the main server are in Argetina, so when I try to make a deploy to check the development it takes a lot of time. Is there a way to make a preview of the pages (Something like the visual designer of netbeans )
thanks to all

Run the page from your JDeveloper locally using the DBC file. I assume you are developing the pages using JDeveloper, so you should be able to run the page.
Thanks
Shree

Error executing the Query after deploying and executing the application in WLS 6.1 SP3

Hi,
We are trying to run a application by deploying a war file on Web Logic Server
6.1 SP3. After deploying and at the time of execution of the application, the
server console displays this error message
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
While debugging thru the application we found that this error comes at the time
of execution of the query thru the Statement.executeQuery method of java.sql.Statement
class.
This same application when deployed on Web Logic Server 8.1 runs perfectly, without
any hitches.
Please, provide me the solution to this asap.

Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic

ROS (without SUS) and EBP in same client-Transferred BP status?

Friends,
We are working on SRM 7.
The ROS (without SUS) and EBP are implemented on the same SRM client.
In supplier registration process, when the accepted business partner is transferred from ROS to EBP, a supplier is correctly created in EBP client with the same business partner number, but the status of the transferred business partner is not updated from 'ACCEPTED' to 'RELEASED', hence there is risk that user can transfer the business partner again.
As per OSS note 857386, the status released is set automatically by the system when an accepted supplier has been distributed. Also the status is valid only for DISTRIBUTED suppliers, that is, ONLY for suppliers TRANSFERED through OPI.
I understand, if ROS (without SUS) and EBP are deployed on separate clients in same server then when the accepted business partner is transferred from ROS to EBP, system triggers an XI message to update the ROS business partner status to 'RELEASED'. Is my understanding right?
How do we update the transferred business partner status to RELEASED when ROS and EBP are on same client?
Regards,
Sandeep Parab
Edited by: Sandeep Meghashyam Parab on Apr 9, 2010 11:43 AM

Hi Sandeep,
I too have a requirement to implement ROS without SUS in SRM 7.0 PPS. Can you send the config guide or steps to follow both in the ROS side and in the SRM Side. Your kind help will be rewarded and highly appreciated.
with regards,
Freemind

How to execute web applications without deploying them?

How can I execute web applications without deploying them (without mentioning them in the server.xml)?
I have an IWS 6.1 SP1 installed with default parameters (JES). I would like that a posix user could execute his own web application without administrator collaboration.
Does it exist some sort of "autodeploy" like in tomcat?
(I know about the invoker mapping in default-web.xml, just I don't realy understand what does it eventuate. I tried to unzip webapps-simple.war in the directory $IWS_SERVER_HOME/webapps/$instance_name/servlet/tmp/
but the http://a.a.tg/servlet/tmp request failed:
javax.servlet.ServletException: WEB2784: Wrapper cannot find servlet class tmp or a class it depends on
----- Root Cause -----
java.lang.ClassNotFoundException: tmp
How can I solve this? Users should have write permission to the directories in the classpath to put their servlet.class files into? Bad idea...
(I tried to "execute" the $IWS_SERVER_HOME/plugins/java/samples/webapps/simple/webapps-simple.war)
(Sorry for my language skills)

Do as many of the rest of us do, until this behavior is changed (if ever). Eport your WEb gallery to your Hd and use an FTP client, there are so many, including Drreamweaver's, and Shareware ones, and upload just the relevant files/folders. Some can even check and do this for you.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Deployment and installation

hi
can any one tell me wat is the diff b/w deployment and instalation. we always deploy j2ee app we dont install them. and we dont deploy .net applications we just run them..???
CAN ANY ONE PLEASE GIVE ME SOME EXAMPLE OF USING JAVA MESSAGEING SERVICES IN J2EE i mean in wat conditions its used...
and if any one can then please give me any link about it as well.
waiting...
thanks
muhammad aqib

Something to do with virtual and actual. J2EE apps are deployed because they run in a virtual server and run within a container created by another application (i.e. Application Server like JBOSS, SJAS, Pramati) while installed applications interact with their hosts without the need of a virtual intermediary like you install JBOSS and J2SDK but deploy S2EE apps to run on JBOSS.
Hope this helps!!!

Is it possible to execute a simple java webdynpro application without deploying?

Hi,
I am a beginner and just have created an elementary java webdynpro application that enables to switch between two views. When I tried to execute the application it prompts me to configure server settings(above screenshot).Is there a way to test the working of my app without deploying in server.
regards,
Ajeeth Kumar S

Hi Jun Wu,
Because without deploying, it doesn't allow me check how my java webdynpro application works!!
I need to execute my java web dynpro application and I dont have any access to SDM pins/passwords.
Please share your valuable thoughts on the same.
regards,
Ajeeth Kumar S

WLS: Several ManagedServer without clustering and same activities

Hi all,
I have a request for special solution for several ManagedServer without clustering and same activities (e.g. SOA or OSB).
In classic case, we have for example 1 AdminServer + 1 ManagedServer (SOA, or OSB). If we want to increase number of SOA-Managedserver, then we add other managed server in WLS-cluster.
In this case, we want to have several "Independent" ManagedServer with different port number and without cluaster but in same domain.
In addition, because we don't want to impact any project in one managed server to other managed server, we need to define different URL:ports for administration: For example: OSB has following URL:
http://localhost:7001/sbconsole
Is it possible to define other ports for other OSB-managed server? e.g. http://localhost:7003/sbconsole, http://localhost:7004/sbconsole
I would like to know, if any experience is available regarding this matter.
Thanks inadvance,
Moh

Hi Moh
1. There are few things that should be clear about the Weblogic Domain and Weblogic Cluster Architecture.
2. Any Weblogic Domain whether its Clustered or Non Clustered will have ONLY ONE Single AdminServer. You CANNOT have more than one AdminServer. Now for Cluster, you can have "n" number of Managed Servers and "n" number of Clusters. Each Cluster is just like a logical grouping of some managed servers. BUT main thing is, if you want to have High Availability architecture to support load balancing, fail over etc, you should and must have a Cluster with managed servers. And expose this Clustered Weblogic Servers into some sort of load balancer like Apace WebServer. Then expose single Apache Web Server URL (host, port + app url) to outside world. General practice is for HA architecture, you do not expose individual managed servers.
3. So coming to your requirement, you can have "n" number of managed servers. And each managed server can deploy their own specific application. And these managed servers naturally will have different port numbers, if they are all on the same physical box. If they are on different boxes, there is no clash of port numbers. Then in front end apache web server, check for each in coming request url and according direct that to appropriate backend weblogic server. This is good but you will NOT get any HA features going in this way. Instead of exposing individual managed servers, I would recommend just create a cluster for each one of them. And expose cluster. For now each cluster can have only 1 manged severs. Later on you can add more also. This gives you HA features. Something like this for example:
Domain = Single Domain
AdminServer = 1 AdminServer only. Not possible more then one.
ManagedServers = 4 (MS1, MS2, MS3, MS4)
Cluster1 = MS1, MS2 -> Deploy App1
Cluster2 = MS3 -> Deploy App2
Cluster3 = MS4 -> Deploy App3
Have a SINGLE Apache WebServer or any other Hard ware load balancer (Apache is free and widely used). Expose this host, port to outside world or actual users (outside or inside). In Apache httpd.conf file, configure like 3 settings, to check for incoming urls and redirect to back end cluster 1 or 2 or 3. Refer docs for full details.
Requests coming to Apache WebServer can use incoming url pattern and pass the request to appropriate backend cluster
http://apachehost:apachport/myApp1 -> Redirect to Cluster1
http://apachehost:apachport/myApp2 -> Redirect to Cluster2
http://apachehost:apachport/myApp3 -> Redirect to Cluster3
Now this gives you full flexibility to add or remove more servers from any of above Clusters. Even if you have single managed server, try to put that into cluster and expose the cluster.
4. Now comes the Adminstration applications like console, sbconsole, em (Enterprise Manager for SOA), cs (Content Server for ECM) etc. All these are deployed only to AdminServer and it makes sense also. Say in above architecture only AdminServer can have visibility to all the managed servers and clusters. Each managed server may not know about the others. Anyhow, the point is, for any Domain you will have only 1 AdminServer and most of the adminstration applications are deployed only to AdminServer. This means literally you will have just one url to control all the applications across all the clusters like http://adminhost:adminport/sbconsole. I am not familiar with sbconole, but for em I am sure its only targetted to admin server. Now, if you manually target these apps to cluster, not sure if this works also. Mostly it may not.
Also, admin urls are not exposed to any users. Only Adminstrators can access them. You can refine some rules like have very few admins with full privileges. Some can do only deployments, some can do only monitoring (read only access) etc.
Thanks
Ravi Jegga

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

Consignment without Deployment and TLB

Similar Messages

Maybe you are looking for