Consistency between CIFed data and BW data
Hai,
I am transferring data from ECC to APO and also from ECC to BW. Now, I use both the data in APO for my planinng.
In case of materials: When CIFing, I have a material, MAT1. With user exit that adds the source name at the begining making it L25MAT1. I also extract historical data from ECC. But I donot add any prefix or suffix. Now when it comes to planning, I have two different names for the same material. How can I get rid of this problem? If I deactivate my user exit, I won't be able to recognize it and at the same time, I don't want to add any prefix to the BW data. I know I can use BSGs but does that help? How does this work if I use BSGs?
Same is the case for location with both customer and vendor the same name.
Thank you.
Visu,
I am confused as to why you took this approach of product naming standard via CIF. The product name should be left as is MAT1. Its the location-product like MAT1-L25 which will be the basis of your planning in APO both SNP and PPDS. For sales history you must be having data at a SKU, customer level which let's say is MAT1 and L25 (assuming it to be the customer). So you extract data from ECC to BW as in form of MAT1-L25-100-EA-W142006 i.e. SKU-customer/Sell to-Quantity-UoM-Time Bucket (week).
Then you generate CVCs based on the Sales History which will create MAT1-L25 for product and location. This can be mapped to both your sales history as well as planning data in SNP and PPDS.
Please note BSG is not used in a scenario mentioned by you. It is used only if you have multiple ERP systems linked to same SCM system and the same product code in different ERP system refers to different products. The SAP help example I think talks about screw and hammer being two different items but having same product code MAT1 in respective ERP system.
Hope this helps.
Thanks,
somnath
Similar Messages
-
Cost in simulation not consistent between accounting column and cost assign
When doing simulation on a trip report that has cash advanced used included I get a inconsistency between
accounting column and trip cost statement in the simulation window.
In the accouting column in simulation, the cash advance used is included as a part a total cost but when I look at trip cost statement that value is not included as an expense to be transferred.
This seems a bit strange to me.
Any suggestions?Hi,
Following could have a reason.
On travel request you may had checked on Cash Office column while requesting advance...
How to resolve it..
You cannot change advance so you have to do following thing.
1) Enter the same amount in negative along WITH checked on Cash Office column ..
2) Enter New amount WITHOUT check on cash office.
then run again simulation..
I hope it would serve your purpose...
Regards,
Muhammad Umer -
Color Consistency between Hardbacked book and soft backed book
I developed, uploaded and received several hard backed books (8.5 x 11) via Aperture 2 and was very impressed with the results. Later, I decided to use the same files to print some additional soft backed books of the same seize and I was really disappointed at the color reproduction on those. No changes to the files between the two orders.
EarlKenneth,
this is hardly an observable difference:
"RGB 243/203/70 in his original,RGB 243/203/71 in mine"
Downsampling should be switched off (instead of placing
by size 100% and using the old ppi value, that's just an
unnecessary complication).
The text by PhS was probably part of the raster image.
In such a case avoid any JPEG compression (e-book),
because this will change almost all colors just a little
even in large areas. Raster text will be garbled (your
observation).
"No Color Conversion and under Profile Inclusion Policy
I set Don't Include Profiles"
This is IMO correct for a reproduction, whatever
ingredients might be in the original page or in the PDF.
The only remaining sources for a color shift - visible
by comparing the two versions under the same test con-
ditions - are downsampling and JPEG compression, IMO.
Note: the question is not whether the two versions are
correct, but whether they are identical.
Best regards --Gernot Hoffmann -
Difference between oracle Data Guard and Replication
Hello Friends,
I would like to know the main difference between oracle replication and data guard. Theoretically both are same then where is the difference. Can replication or dataguard be configured in a single PC.
ThanksDataguard :
Oracle Data Guard is primarily for high availability, data protection, and disaster recovery. An Oracle Data Guard Standby instance provides transactionally consistent copies of the production database, in the event of an unplanned outage or instance maintenance the Data Guard Primary Role Standby Role can be switched so the Standby instance can provide Production services.
Replication :
Oracle Advanced Replication and Oracle Streams are Oracle's solution for replicating data and internal structures to remote databases. Advanced Replication is primarily trigger based where Streams is a rule/handler based replication process and considerably more efficient and less error prone than Advanced Replication
refer,
http://www.xtivia.com/database-management/replication/oracle-replication
Thanks -
Can anybody explain me difference between test cases and test data
Hi All,
Can anybody explain me difference between test cases and test data.
Testing procedure for FS.
Thanks & Regards,
SmithaHi,
Test case is a procedure how to do the testing of particular functionality and it consists the data that to be given for testing a particular requirement of the given Functional Spec and it also consists the result whether the desired functionality is fullfilling or not.
Regards
Pratap -
Date between sysdate-50 and sysdate problem
hi,
i have a big big problem and i need some help
I have oracle 8i and 10g databases installed at work. i have a problem with an select statement that brings data from 3 tables.
The select looks like this:
select mms_id, img_id, mms_usr_id as usr_id, mms_pvd_id, mms_data as data
from vsc_mms vm, vsc_image vi, vsc_user vu
where img_mms_id = mms_id
and mms_usr_id = usr_id and usr_client_id = cli
and img_mms_id <> 0
and mms_status =0
and mms_data between data_ini and data_end .......is not very important; the joins are made all right. What is important is that:
vsc_mms has aprox. 3.000.000 recordings
vsc_image has, also, aprox. 3.000.000 recordings.
select count(distinct img_date) from vsc_image =657.021
select count(distinct mms_data) from vsc_mms >=600.000
On both tables there are, among other, index on mms_data, img_date.
Now, my data_ini and data_end come from java (user send data_ini and data_end through http:// ) OR i can put this select in a procedure like:
declare
datai date:=to_date('20.01.2006','dd.mm.yyyy');
datae date:=to_date('30.01.2006','dd.mm.yyyy');
......my select ..... and mms_data between data_ini and data_end
the select takes on 8i more than 30 seconds. the same select takes on 10G quite same long time. i also run the select using
and mms_data between sysdate-50 and sysdate and i got the same long time.
Also important: this select brings almost 30 recordings; when the restrictions are too severe and the count(*) =0 the result is brought in 0.01 seconds; outherwise, when count(*) >1, is ruinous.
But, if i put and mms_data between to_date('20.01.2006','dd.mm.yyyy') and to_date('30.01.2006','dd.mm.yyyy'), the response come in 1 seconds or less.
1. Can someone help me and tell me why i got this long time for response when i use sysdate or when receiving data_ini, data_end like parameters from java
2. is it true that for a better usage of a index, the procent of repeatedly recordings has to be small? I mean when i have 600.000 distinct recordings from 3.000.000 is it good or not to use index on that column?
thanks in advanceThere can be some difference in how Oracle builds execution plan when
you are using binding variables and explicit values:
SQL> create index idxtbl1 on tbl1(date#);
Index created.
SQL> insert into tbl1 select sysdate-rownum from (select 1 from dual connect by lev
200000 rows created.
SQL> create index idxtbl1 on tbl1(date#);
Index created.
SQL> analyze table tbl1 compute statistics for all indexes;
Table analyzed.
SQL>set autotrace traceonly
SQL> var a1 varchar2(20)
SQL> var a2 varchar2(20)
SQL> select * from tbl1 where date# between to_date('01/01/1900','dd/mm/yyyy')
2 and to_date('01/01/1901','dd/mm/yyyy');
365 rows selected.
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=3 Card=365 Bytes=3
285)
1 0 INDEX (RANGE SCAN) OF 'IDXTBL1' (INDEX) (Cost=3 Card=365 B
ytes=3285)
Statistics
0 recursive calls
0 db block gets
28 consistent gets
0 physical reads
0 redo size
6809 bytes sent via SQL*Net to client
772 bytes received via SQL*Net from client
26 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
365 rows processed
SQL> exec :a1 := '01/01/1900'
PL/SQL procedure successfully completed.
SQL> exec :a2 := '01/01/1901'
PL/SQL procedure successfully completed.
SQL> select * from tbl1 where date# between to_date(:a1,'dd/mm/yyyy')
2 and to_date(:a2,'dd/mm/yyyy');
365 rows selected.
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=4 Card=495 Bytes=4
455)
1 0 FILTER
2 1 INDEX (RANGE SCAN) OF 'IDXTBL1' (INDEX) (Cost=4 Card=495
Bytes=4455)
Statistics
0 recursive calls
0 db block gets
28 consistent gets
0 physical reads
0 redo size
6809 bytes sent via SQL*Net to client
772 bytes received via SQL*Net from client
26 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
365 rows processedRgds. -
To find months and days between 2 dates
Hi,
I want to find the months and days between 2 dates.
For Eg.
Date-1 : 25-Aug-2013
Date-2 : 23-Oct-2013
If we consider every month as 30 days it should give
25-Aug-2013 to 30-Aug-2013 = 6 days
01-Sep-2013 to 30-Sep-2013 = 1 Month
23-Oct-2013 to 30-Oct-2013 = 8 days
Total = 1 month and 14 days.
Kindly help at the earliest.
Thanks & Regards
SureshSureshM wrote:
Hi,
I want to find the months and days between 2 dates.
For Eg.
Date-1 : 25-Aug-2013
Date-2 : 23-Oct-2013
If we consider every month as 30 days it should give
25-Aug-2013 to 30-Aug-2013 = 6 days
01-Sep-2013 to 30-Sep-2013 = 1 Month
23-Oct-2013 to 30-Oct-2013 = 8 days
Total = 1 month and 14 days.
Kindly help at the earliest.
Thanks & Regards
Suresh
That's not a good idea though. Be considering every month as 30 days, then comparisons over larger date ranges (years) will be out by more and more days the larger the difference gets.
Your example is also wrong.
For Eg.
Date-1 : 25-Aug-2013
Date-2 : 23-Oct-2013
If we consider every month as 30 days it should give
25-Aug-2013 to 30-Aug-2013 = 6 days
01-Sep-2013 to 30-Sep-2013 = 1 Month
23-Oct-2013 to 30-Oct-2013 = 8 days
The last one should be:
01-Oct-2013 to 23-Oct-2013 = 23 days
giving a result of 1 month and 29 days.
Oracle provides a months_between function to do the calculation.
SQL> select months_between(date '2013-10-23', date '2013-08-25') from dual;
MONTHS_BETWEEN(DATE'2013-10-23',DATE'2013-08-25')
1.93548387
But of course, because the number of days in a month varies, it's not exacly known what the decimal part of the number represents.
However, if you combine methods, using months_between to get the months, and then assume 30 days for a month to get the days part from the remainder, it's more consistent over longer periods...
SQL> ed
Wrote file afiedt.buf
1 with dates as (select date '2013-08-25' as date_from, date '2013-10-23' as date_to from dual)
2 --
3 select months_between(date_to, date_from)
4 ,trunc(months_between(date_to, date_from)) as months
5 ,round(mod(months_between(date_to, date_from),1)*30) as days
6* from dates
SQL> /
MONTHS_BETWEEN(DATE_TO,DATE_FROM) MONTHS DAYS
1.93548387 1 28 -
Difference between relational integrity and data intigrity
hi
could anybody tell me
what is the difference between
relational integrity and data intigrity
tahnx
kals.hi,
Data Integrity
Data integrity means, in part, that you can correctly and consistently navigate and manipulate the tables in the database. There are two basic rules to ensure data integrity; entity integrity and referential integrity.
The entity integrity rule states that the value of the primary key can never be a null value (a null value is one that has no value and is not the same as a blank). Because a primary key is used to identify a unique row in a relational table, its value must always be specified and should never be unknown. The integrity rule requires that insert, update, and delete operations maintain the uniqueness and existence of all primary keys.
The referential integrity rule states that if a relational table has a foreign key, then every value of the foreign key must either be null or match the values in the relational table in which that foreign key is a primary key.
What is a Relational Integrity?
A relational database contains tables of data which are related to each other. For example, articles are related to the author who wrote them, and conversely, authors are related to the articles they wrote. (Sounds obvious, and it is.) That's the relational part.
When we work with a relational database, we naturally expect that data in related tables stay related. For example, articles written by MartinB should always be related to MartinB and never be confused with articles written by any other author. That's the integrity part.
Relational Integrity is also called Referential Integrity, perhaps because the mechanism for ensuring integrity is implemented by the way the tables reference each other. Both terms are okay with me. I usually just say RI anyway.
Regards,
Sourabh -
Difference between sy-datum and any given date
Dear Friends;
I have one query regarding DATE I wanna calculate the difference between
SY-DATUM and ANY GIVEN DATE . Is there any function or code available that take one parameter as sy-datum and another parameter as any given date and give result as no. of days between them
Regards;
ParagDATA: DATEDIFF TYPE P.
CALL FUNCTION 'SD_DATETIME_DIFFERENCE'
EXPORTING
date1 = '20071122'
time1 = '000001'
date2 = '20070905'
time2 = '000001'
IMPORTING
DATEDIFF = DATEDIFF
EXCEPTIONS
INVALID_DATETIME = 1
OTHERS = 2.
Greetings,
Blag. -
Function to get differenece between sy-datum and any date entered in days
Dear Friends;
I have to find out the days difference between sy-datum and any valid date that come from table . Is there any function available in SAP that will give me
the difference in no. of days between sy-datum and any date that come from table??
please help me out.
Regards;
ParagJust subtract the dates from each other and you will get the number of days. I have used it and it works prefect
try this:
DATA: date1 like sy-datum,
date2 like sy-datum.
data I type i.
date1 = '20070301'.
date2 = '20070228'.
i = date1 - date2.
write: / date1, date2, i.
date1 = sy-datum.
date2 = sy-datum - 30.
i = date1 - date2.
write: / date1, date2, i.
SD_DATETIME_DIFFERENCE -
Working days between two date fields and Changing Factory Calendar
Hi,
I have to calculate working days between two date fields excluding the weekends and public holidays for Switzerland.
I have written the routine using factory calender and its working fine except for two problems now:
1. If any one of the date field is empty then teh rsult should be zero.
2. And the below code is working from 1996 but my cleints wants it to work for years before 1996 as well.
I also tried to change the Start date in SCAL for factory calendar but it says enter values between 1995 to 2020.
I am new to ABAP. Please help me how i can achieve these for below code.
DATA: IT_HOLIDAYS type TABLE OF ISCAL_DAY,
IS_HOLIDAYS TYPE ISCAL_DAY.
DATA: T_DATE TYPE SY-DATUM,
P_DATE TYPE SY-DATUM.
DATA : X_DATE(4) TYPE C.
DATA: CNT TYPE I.
REFRESH : IT_HOLIDAYS.
CLEAR : IT_HOLIDAYS.
T_DATE = SOURCE_FIELDS-/BIC/ZCCCHP812.
P_DATE = SOURCE_FIELDS-/BIC/ZCCCHP810.
CALL FUNCTION 'HOLIDAY_GET'
EXPORTING
HOLIDAY_CALENDAR = 'CH'
FACTORY_CALENDAR = 'CH'
DATE_FROM = P_DATE
DATE_TO = T_DATE
TABLES
HOLIDAYS = IT_HOLIDAYS
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 1
HOLIDAY_CALENDAR_NOT_FOUND = 2
DATE_HAS_INVALID_FORMAT = 3
DATE_INCONSISTENCY = 4
OTHERS = 5.
DESCRIBE TABLE IT_HOLIDAYS LINES CNT.
X_DATE = T_DATE - P_DATE - CNT.
RESULT = X_DATE.
Please help
Regards
Zabina
Edited by: Syed786 on Nov 2, 2011 9:15 AMHi Zabina,
Try this function module 'DURATION_DETERMINE'.
Give the factory calendar and unit as DAY
With regards,
Rajesh -
Hi Experts,
We have a requirement to fetch the value of 'No of days' between Invoice date and due date (Two variable date fields on the template) in an Analysis.
Please let me know the procedure of how to achieve the same.
Regards,
Revit's good for ideas but implementation a bit different
Oracle Business Intelligence Publisher Report Designer's Guide
This function provides a method to get the difference between two dates in the given locale. The dates need to be in "yyyy-MM-dd" format. This function supports only the Gregorian calendar. The syntax is as follows:
<?xdoxslt:date_diff(‘format’, ‘YYYY-MM-DD’, ‘YYYY-MM-DD’, $_XDOLOCALE, $_XDOTIMEZONE)?>
where
format is the time value for which the difference is to be calculated
Example:
<?xdoxslt:date_diff(‘d’, ‘2006-04-08’, ‘2006-04-01’, $_XDOLOCALE, ‘America/Los_Angeles’)?>
returns
-7 -
Opening and closing balance between 2 dates
hi.
i am facing a problem while fetching the opening and closing balance for a particular G/L account.
In my program i am entering G/L account for a date range i.e, between two dates and i want opening and closing balance for these 2 date ranges.
So, please tell me is there any function module to fetch opening and closing balance between two dates.
Regards,
ROHINI.K.Hi Rohini,
Check this FM : BAPI_GL_GETGLACCPERIODBALANCES.
If we use this functional module, we will get opening and closing balance of corresponding G/L Acc.
(e.g)
CALL FUNCTION 'BAPI_GL_GETGLACCPERIODBALANCES'
EXPORTING
companycode = '1000'
glacct = '0000548101'
fiscalyear = '2007'
currencytype = '10'
IMPORTING
BALANCE_CARRIED_FORWARD = gs_bal-balance
RETURN = v_return
TABLES
account_balances = gt_bal. -
Data reconciliation between R/3 and the BW Systems
How do we do data reconciliation between R/3 and the BW system for the following areas?
Purchasing
Controlling:
Project System:
COPA
SD
AP
Trgards,
Tony GTony
Have you looked these documents??
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20validate%20infocube%20data%20by%20comparing%20it%20with%20psa%20data
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Re: BW v. R/3 data reconciliation
Hope this helps
Thanks
Sat -
Kernel Panic while transfering data between MAC HD and network drives
Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
Here is the log fine with error code:
Error code: 0x0000000000000000
Interval Since Last Panic Report: 5 sec
Panics Since Last Report: 1
Anonymous UUID: 3C5AA43F-D876-4F9D-A831-D8043218C6E0
Tue Aug 16 14:54:46 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80de173b40 : 0xffffff8000204d15
0xffffff80de173c40 : 0xffffff80002d1208
0xffffff80de173d90 : 0xffffff80002e3f4a
0xffffff80de173da0 : 0xffffff7f815c6b54
0xffffff80de173ed0 : 0xffffff80002524fe
0xffffff80de173f00 : 0xffffff8000478c7f
0xffffff80de173f40 : 0xffffff7f8159b158
0xffffff80de173fa0 : 0xffffff80002c8527
Kernel Extensions in backtrace (with dependencies):
com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 105374280984
unloaded kexts:
(none)
loaded kexts:
com.vmware.kext.vmnet 3.1.3
com.vmware.kext.vmioplug 3.1.3
com.vmware.kext.vmci 3.1.3
com.trendmicro.kext.KERedirect 1.0.0
com.trendmicro.kext.filehook 1.5.0
com.vmware.kext.vmx86 3.1.3
com.thursby.kext.cifs 5.1
com.thursby.kext.NetBIOS 5.1
com.apple.filesystems.smbfs 1.6.7 - last loaded 60402747883
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.kext.ATIFramebuffer 6.3.6
com.apple.driver.AppleBluetoothMultitouch 54.3
com.apple.driver.AppleIntelHDGraphics 6.3.6
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.ATIRadeonX3000 6.3.6
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.AirPort.Atheros9388 426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.0.46
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB 6.3.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f14
com.apple.driver.IOBluetoothHIDDriver 2.4.5f3
com.apple.driver.AppleMultitouchDriver 207.11
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.AppleThunderboltEDMSink 1.1.1
com.apple.driver.AppleThunderboltEDMSource 1.1.1
com.apple.kext.ATI6000Controller 6.3.6
com.apple.kext.ATISupport 6.3.6
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.AppleThunderboltDPOutAdapter 1.3.2
com.apple.driver.AppleThunderboltDPInAdapter 1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.1.6
com.apple.driver.AppleUSBHIDKeyboard 141.5
com.apple.driver.AppleHIDKeyboard 141.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.AppleThunderboltNHI 1.2.6
com.apple.iokit.IOThunderboltFamily 1.4.9
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Officejet Pro 8000 A809, 0x03f0 (Hewlett Packard), 0x3612, 0xfd140000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa132000 / 8
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
You might now create a new temporary user account. Log into the new account. Do the panics still occur?
I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions.
Maybe you are looking for
-
Printer setting could not be saved operation could not be completed error
printer setting could not be saved operation could not be completed error 0*000006cc
-
Ipod touch 5g stuck on headphone mode help
my little brother ipod is stuck on headphones mode n the music wont play at all but in ringtones it shows the ringtone on speaker but other then that the music wont play outloud or siri wont talk nothingg help me please what do i do to fix this?????
-
Vista Bootcamp, problem running drivers no sound or airport
Hello I have installed Vista on my Macbook pro via Bootcamp I have tried to install drives from here - http://support.apple.com/downloads/Boot_Camp_Update_2_1_for_Windows_Vista_32 And also Burned a cd version of the drives from the bootcamp assistent
-
Do nothing the buttons in the portal
Hi Experts, I have a problem, I´m trying to configure the SRM in the portal, but, in the BSPs, the buttons copy, edit, create, create shopping cart, etc etc do nothing. I click in them, but not appear nothing, not appear error, not appear a new popup
-
Hi Experts, Question related to Make to order (MTO) I was created one sales order successfully. Then I run MRP and i got Planned sales order. After that I converted that planned sales order as process order. When i click on release icon, my proble ar