Consistent Audio in iMovie

Is there a way to make sure your entire project maintains the same audio levels throughout? I have different audio levels from different sources and I have played with the audio in the timeline but I need something better. I was thinking of extracting the audio and sending it to Logic but this seems to be a bit archaic if not impossible. Any info you could pass along would be helpfull as I have a brain cramp.
Power Mac G5 Mac OS X (10.4.8)

I don't know about Logic (but I assume you can if the imovie and Logic versions are compatible).
But, you can export the audio only to GarageBand ( audio and video with imovie 6!) by highlighting the audio track and checking the "Share slected clips only" box.
Then save this newly edited GarageBand audio to itunes and re-import to imovie from iTunes.
Sue

Similar Messages

TS2289 Audio in iMovie 11 files but missing in sections when shared to iDVD. The movie and audio plays fine in iMovie but my burned iDVD movie is missing some audio .

I imported a movie into iMovie 11 from a Canon Vixia HFR 300 SD card with no problem. I have a new iMac running OsX 18.8.4 I think. I added chapter markers and shared it with iDVD. And burned it to a DVD. Towards the end of this 30 minute movie the sound just stops. I do remember some screen came up when I wanted to burn DVD that said something was wrong with files but I couldn't figure what do to fix it and allowed me to continue. Any ideas?

Hi
Either the problem is in iMovie or in iDVD
two notes
No Audio in iMovie
Most common origin is use of audio from iTunes.
Work around -
• Select needed audio to one new playlist
• Copy out this as an Audio-CD .aiff (not .mp3)
• Use this in the movie-project
Other origins are
1. strange / alient file formats as -
• .mp3, .avi, .wmv etc
• Convert them into .aiff 48kHz 16-bit and use this
2. the Mac is set wrongly in regard of midi -
• Close iMovie and other programs
• Start GarageBand
• Make a new GB-project and play some notes
• Close GB and Save
• Now try iMovie again
3. No audio when playback in iMovie 1 to HD 6.
a. in iMovie pref. - deselect ” Playback via Camera”
b. in System preferences - see that Audio out is not set to zero. Mine often does this
without me knowing why.
4. iMovie’08 & 09 & 11
• Toggle audio-scimming by cmd-K
Stuttering audio and video
1. FileVault is ON - Turn it off
2. More than 50 audio files in a movie-project
Mix down to one audio clip
3. Project is stored on one (USB) external hard disk - should be a FireWire one
4. the External hard disk is not Mac OS Extended formatted - but
UNIX/DOS/FAT32/Mac OS Exchange and this will not work for Video.
5. To little free space on internal boot hard disk.
I go for a minimum of 25Gb free space when project is imported and edited and this goes for
4x3 SD Video. For 16x9 HD my guess would be about 5 times more at least.
Neither Mac OS, iMovie or iDVD can address any other hard disk than the boot drive for it’s
scratch files. (Unlike Final Cut Express/Pro where You select scratch disk/s)
6. Network storage - DOESN’T WORK
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
•OR burn with Roxio Toast™ if You got it
Yours Bengt W

Add audio to imovie without itunes

I'm having trouble with the newest version of itunes (11.2.1) so that I will have the audio I made to add to my movie. Is there another way to import the audio into imovie? It is an audio tape and itunes was working great for this, but I can't do it any longer. Please help!

resolved. Thanks

How to add audio to iMovie on the iphone?

The speak recorder on the iphone is ok to record audio. But how do I get those recordings into imovie on iphone? Its the latest imovie (2.0?) on iOS7 on iphone 5.
Thanks for any help
Erland

Thanks for looking into this. I am probably unclear here...
What I hope to do is to get audio recording fra the that speach recorder app that comes with iOS. The recordings can only be exported through mail, messages and dropped with Airdrop.
Hmm maybe with itunes in some way.
I would like to use speach recorder and then import that audio into imovie, not the audio effects that are with imovie.

How to i trim audio in imovie 11

I just separated audio from an imovie clip, and now need to slice the audio in various places and and place back into the video. HOW DO I TRIM AUDIO in imovie 11. The old imovie was easy, I can't seem to find out how. Thanks.

There are several ways to do this.
First go to iMovie/Preferences and make sure the Advanced Tools are enabled.
The simplest way would be to select the frames of video in the Event that contain your audio and drag to the project. Drop it on the approximate frame (in the project) where you want it to start. A pop-up menu will appear: choose Audio Only.

Audio in imovie

when i share movie to itunes some of the audio track plays back very quiet.

If you want to increase the volume of the audio in iMovie, you can click on the audio bar below the video and drag up.

No USB Audio In Imovie

I have been trying to use my Logitech USB headset for recording audio in iMovie for over two days now,
I change the settings in System prefs and also in imovie but i can only record audio through the internal mic on my 24'' imac. Is anyone else running across this problem?

philaken wrote:
I do not have the "Audio Only" option when I try to Export the file. In Options, the only format I have is Linear PCM. The options I have for Export are Sound to Wave, Sound to AU, Sound to AIFF. None of them imported.
As mentioned, the "Audio Only" option is in QuickTime X (there are only 2 options: movie or audio). I'm not sure what version of Mac OS you are using, but QT X is part of the OS. QuckTime 7 provides a range of audio options, as you indicated. It's surprising that an export in the AIFF format didn't import to iMovie.
Sorry to hear you are not having any success. I'm a little vague on this, but some time ago I recall having a problem with voiceovers not playing. What I think worked was to click on the Project Library, then click on another project and wait until it loaded in the Viewer (no need to actuaaly open it by double-clicking). Then re-open your current project. If my memory serves me correctly, the voiceover then played properly in the timeline. Give this a try!
I noticed another thread where the poster is having a similar problem to yours. I'll post a link in that thread to this thread. Hopefully something here may help that user.
John

New Sony DCR-SR200 clips don't play audio in iMovie 09

I have previously imported 100's of video clips from Sony DCR-SR200 to imovie 09 with no issue.
I imported several more yeterday and none play the audio...including some that I had previously imported (and work fine) and had left on the camera and re-imorted. I played one of the files with Streamclip and there is audio.
running iMovie 09 v 8.0.6 and OS X 10.6.5
any ideas?

Found the answer to my problem.
http://support.apple.com/kb/HT1372
Seems that Apple has been reading the Microsoft playbook and by providing a free "upgrade" to iMovie 09 from 08 has now removed the ability to import MPEG2 files directly...where previously you could.
I can now pay to upgrade to '11 which claims to support MPEG2 on this camera. Has anyone else been down this road and paid to fix what Apple broke for free? Cost isn't the issue, just hoping to avoid the hassle of the upgrade to discover it won't work
Thanks

Capturing Video w/Audio in iMovie?

Hi,
I was just wondering if it's possible, using the iSight and the built-in mic on a MBP, to capture video w/audio with iMovie? Or just video w/out audio? I tried to capture video, but the audio didn't seem to come through at all. If it's not possible, any program reccomendations?
Cheers,
Tom.

Hi Tom:
Just to be sure, do you have thee timeline audio boxes checked?
Sue

Audio from iMovie 10.1 to garageband??

wanting to edit some sound from iMovie, so Just wondering if anyone knows how to get audio from iMovie 10.1 in to garage band at all? i have found numerous tips and videos from the previous versions but not 10.1?? can anyone help

Curious also is that in the new Garageband 10.0.1, the media broswer only shows the "old" iMovie library (from 9.0.9), you can though browse all movies in the movie folder, (so except the new iMovie 10 Library)
So either you share your movie with iTunes (that you can look up in the mediabrowser of GB) or export as an mp4 movie tot your movies folder, which you can approach as well via the media browser in GB 10.0.1
Ben

Problems with audio on iMovie 10 conversions.

I just converted my videos from iMovie 7 to iMovie 10. Now all of the audio on these videos has loud high pitched beeping sounds. How can I fix this?

Could be corrupted permissions and preferences.
Sometimes permissions and preferences can get corrupted. Whenever iMovie starts acting funny, a common maintenance procedure is to do the following: Delete preferences by closing iMovie and trashing the file com.apple.iMovie.plist found in User (the House icon)/Library/Preferences. Then do a permissions repair using the Utilities/Disk Utility App on your Mac. Open the Disk Utilities window and select the Mac hard drive icon at the top of the side pane at the left. Then click on the Repair Permissions button. When you have repaired permissions and deleted preferences, restart your computer and launch iMovie. iMovie will replace the .plist file that you deleted. Be sure also that you have sufficient free disk space on your hard drive for iMovie to function correctly. 25GB often is recommended by users of this forum. After doing all of the above, relaunch iMovie and see whether you still have the problem.

Working with audio in iMovie 08

I'm working on a video project and I want to use my itunes. I figured that part out easy, but now I don't know how to use only certain parts of certain songs in certainparts of the video. Any help would be great.

follow this Tutorial
http://www.apple.com/ilife/tutorials/#imovie-sharing-33
or pg39 ff of manual
http://manuals.info.apple.com/en/iMovie08_GettingStarted.pdf
imagine the green audio-clip as an iTunes music..

Quicktime clip has no audio on iMovie

Hi. I downloaded a short video clip on limewire, then dragged that clip from my limewire folder onto iMovie. The clip transferred alright, but when i play it on iMovie, there's no sound.
Any suggestions?

Hi Mole - your video will be in MPEG format which iMovie is not really designed for. It will have to be converted to DV format in order to function properly and include audio. See here for some info on what that conversion entails.
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
There are also many threads on this topic in the forum archive, so a search will turn up plenty of discussion!:

Muting original audio in iMovie

I am trying to put together a highlight video of sports clips in iMovie and put them to music. How do I mute the original audio so that only the music can be heard? Thanks!

OPen the clip inspector for the clip on your project and go to the audio tab. Set the volume slider to zero.

Exporting Photos / Audio from Imovie to DVD

Hi,
I've created a slide show with a "mixed audio track" in IMovie. Its a slide show for my wedding and I want to be able to pop in the CD into a player and sit back and watch it.
Using the IMovie directions...every time I try to export this it either asks for my video connection....or won't allow me to do it. I've created all the fades / music to work together all ready...but I just want to be able to burn this to a disk. Can anyone offer suggestion on how to do this easily. I'm not to Mac and learning..but am running out of time with my wedding approaching. Thanks in advance. I do have the basic programs and have Final Cut Express HD too.

Hi Bill
-- I want to be able to pop in the CD into a player --
Why not to a DVD ?
If You can stand the idea of a DVD then instead of Export/Share to iDVD do:
Close iMovie
Locate Your project icon/folder
icon when using iMovie 5/HD
Ctrl-click on this and select - show package
in this locate a folder - share movie
in this locate a folder - iDVD
in this there is a QT movie file (just a ref - not the whole thing)
take this "project name".mov file and drop it into an open theme window
in iDVD (just inside the edge of it so that it not ends up as a hot button)
adjust Your DVD theme to Your liking and then go to FILE menu
and select make a disk image.
When - several hours later - it is ready. Try it with Apple DVD-player.
If OK then burn it either with iDVD (and some more hours of coding or
with Apple Disk utility tool (be sure to select make a movie DVD - so it
doesn't end up with a Data-DVD) (last suggestion is really out of my knowledge.
Haven't tried it ! (but everybody else writes about it so it must work)
or
To get Your movie back to the Camera. I don't use Share function in iMovie.
I just cheque in iMovies. pref. Play-back via camera.
Then put in a fresh tape.
Set the camera in VTR mode (not filming but playing)
press record on the Camera and play in iMovie.
Wait
OK!
Yours Bengt W

Consistent Audio in iMovie

Similar Messages

Maybe you are looking for