Consistent vertical space between elements in page layout--Pages 09
Hello,
Is there a way to maintain a consistent amount of vertical distance between elements in the Pages 09 layout view?
Thanks,
~A
Select a series of objects:
+Menu > Arrange > Distribute Objects+
Or use:
+Inspector > Objects > Metrics (6th tab)+ to position them accurately.
When you move objects Pages offers you various alignment guides to position them relative to other objects edges' or centres.
Peter
Similar Messages
-
How to control the space between records in form layout
Hi ,
I need to display mutiple records (15-20) in a form ,
and have choosen FORM layout as I need to display each record in two lines (Can a record be displayed in two lines in TABULAR layout ? ) .
Now There is lot of space between each record and I could not move records closer . How can I control space between reords in FORM layout ?
(While creating Canvas I selected Distance bwteen records = 0 )
Thanks in advance,
AshaAsha,
no in tabular layout there is no way to display a record on two lines. All you can do is to use a stacked canvas and use it to make the table scrollable horizontally
The distance between record setting is a property on the item level. if this is set to 0 (please double check) then all that is loeft is the item bevel. You can set the item bevel property to plain and then work on resizing the items hight until close to acceptable.
Frank -
Change displayed text in textfield an space between elements
Hey people,
a have a Form based on a View. i want to change the spaces between some rows or elements (to group some elements) and don't know how.
For example:
Name Surname
Birthday
Phone Mobil
City
Between Birthday and Phone, and Phone and City now should be more space.
I made it now like that:
Birthday: Display --> rowspan --> 2
and put an Element just shown as Text empty without label below "Birthday". But i don't like that because i need so much empty elements. Is there another possibility to change the style?
I want to change the size from the displayed text in the textfields too, or make it bold maybe.
I hope, i could make it comprehensible to you, if not ... just ask
Greetings, Janahey ageller,
thank you very very much. that is exactly what i'm searched for ;-)
can you tell me, if this doesn't work in firefox or mayby why? in IE 7 all works fine, but Firefox 2.0.0.6 doesn't show any changes.
I cleared the cache but still no changes.
Got the same problem with the width of my columns. In IE, Content is shown in one row and Firefox there is linebreak.
Do you (or anybody else) know, how i can fix this??
Thank you so far ....
Jana -
Reduce the size between two Iviews in Layout Page
Hi All,
I want to reduce the gap between the two iviews in the layout page of my portal.
For this i have downloaded com.sap.portal.layouts.framework.par
and i got two .js files
1) WAandNavPanel.js
2) light_navpanel.js
So now in which file i have to change the size.
Awaiting Replies.
Thanks & Regards,
Dhruv Shahbetter to keep backup of those two files before modifying.
see modificationusing first jsp file in which u mentioned.
How to change navigation panel default (initial) width?
Remove/hide expand/collapse icons
Points are welcome if it is helpful
Koti Reddy -
How do I add vertical space between items in a WebHelp TOC in RoboHelp 10?
I recently upgraded from RoboHelp 8 to RoboHelp 10. When generating my WebHelp output in RoboHelp 8, I added space between the items in the table of contents by editing the following line in the whthost.js file.
var gsMargin="6pt";
After upgrading, I edited the same line in the whthost.js file for RoboHelp 10. Unfortunately when I generate my WebHelp output in RoboHelp 10, no space is added between the items in the table of contents.
Does anyone have any idea why editing this setting in the whthost.js file no longer produces the desired results? Does anyone have any suggestions?
Thanks!
GeorgeOne way is to do something like this:
1) create your styles like this:
span {
font-family: "Courier New", Courier, monospace;
letter-spacing: 3px;
2) create your HTML like this:
<p> <span>Xc = 10^6/2* pi *50 * C Xc = 10^4/pi C </span></p>
Now is this what you are looking for? If not please post back so that something else can be suggested like Math HTML such as this one:
<MATH>∫_a_^b^{f(x)<over>1+x} dx</MATH>
FF and latest IE9/10 supports MAtH HTML as far as I know.
This is the picture of display in IE10:
Good luck. -
Programmaticallyset vertical space between frames
Does anyone know how to programmatically set the verticaly space between frames property from the format trigger ????
TIASorry, there is no way to do it (at least not in 6i).
You are limited by the SRW built in packages as to the properties you can set programmatically. I suppose you can create your own packages that may do this if you really want to.
HTH,
Steve -
Can I measure the space between elements like in Photoshop?
In Photoshop, I can hold the Option key to show the distance between elements. Is there a way to do this in Illustrator?
Look for the Measure Tool under the Eyedropper...
-
I created page layouts using Visual Studio 2013 and SharePoint 2013. I added both ASP.NET web controls (e.g. asp:Label, asp:HyperLink) and SharePoint web controls (e.g. SharePointWebControls:UrlField) in a page layout.
However, when I deployed the solution, I cannot edit all the ASP.NET & SharePoint web controls (column fields from custom content type used for the page layout) except the web part zones.
Then I found out about inherits property:
1) if I use the code for the page layout as shown below:
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="BlogDemo.aspx.cs"
Inherits="DemoProject.Branding.BlogDemo" MasterPageFile="/_catalogs/masterpage/DemoProject/DemoMasterPage.master"
%>
Result: There is no publishing ribbon/tab. E.g. Edit, Publish..... although both ASP.NET & SharePoint web controls can be displayed on the page layout.
Screenshot:
2) if I use the code instead as shown below:
<%@ Page language="C#" Inherits="Microsoft.SharePoint.Publishing.PublishingLayoutPage,Microsoft.SharePoint.Publishing,Version=15.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c"
meta:progid="SharePoint.WebPartPage.Document" %>
Result: Publishing ribbon/tab is available, but ASP.NET web controls won't appear. Only SharePoint web controls appear on the page layout.
Screenshot:
I wonder how I can combine both codes to ensure that the page layout can have publishing ribbon/tab and displays both ASP.NET & SharePoint web controls.Found a way to solve the issue
I follow the solution:
http://pinnacleofindiana.com/blog/developers/2012/03/28/creating-a-sharepoint-2010-page-layout-with-code-behind/
http://blogs.msdn.com/b/kaevans/archive/2011/04/02/code-behind-page-layouts-with-visual-studio-2010.aspx -
Vertically spaces between UI elements
Hi all,
How do you set up spaces vertically between different UI elements ?
All my UI elements are near each other, I use mainly RowLayout and FlowLayout.
Thanks !Hi Benjamin,
In the width , enter the width of UI elements , In crease the width upto how much spacing u want., u can also use medium , Large in vAlign., In the vAlign of UI element select medium or large . This also will give spacing.,
If u use grid layout left padding and right padding helps u .
revert if u need some more clarifications.,
Thanks & Regards
Kiran -
My layout wont listen to size I set and creates huge spaces between element
I am having a small issue:
Here is an image with the issue:
http://i877.photobucket.com/albums/ab335/darksniperx2/asg2_prob.jpg
Is there anyway to remove all of the extra spaces and that the program would follow with the size I specify?
code:
public void initialiseComponents(final Container pane){
//initialise panels
mainPanel.setLayout(new GridLayout(2,1));
topSection.setLayout(new GridLayout(1,3));
mainGrid.setLayout(new GridLayout(21, 6));
//initialise components text
nameLbl.setText("Enter you name:");
timeSchLbl.setText("Time scheduler");
chkBoxNotificationLbl.setText("Check on the check boxes");
timeLabel.setText("Time");
modayLabel.setText("Monday");
tuesdayLabel.setText("Tuesday");
wednesdayLabel.setText("Wednesday");
thursdayLabel.setText("Thursday");
fridayLabel.setText("Friday");
//add compenents to topSecion
topSection.add(nameLbl);
topSection.add(timeSchLbl);
topSection.add(chkBoxNotificationLbl);
//add components to mainGrid
mainGrid.add(timeLabel);
mainGrid.add(modayLabel);
mainGrid.add(tuesdayLabel);
mainGrid.add(wednesdayLabel);
mainGrid.add(thursdayLabel);
mainGrid.add(fridayLabel);
setCheckboxes();
//add layouts
mainPanel.add(topSection);
mainPanel.add(mainGrid);
pane.add(mainPanel);
private static void createAndShowGUI() {
//Create and set up the window.
asg2 frame = new asg2();
frame.setSize(1000,900);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Set up the content pane.
frame.initialiseComponents(frame.getContentPane());
//Display the window.
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}Hold it right there, I did not say that GridLayout was no good. It is perfect for your other two panels, but not for mainPanel.
... which one do you think would be better or serve this situation?First, check out the link Mr Burke gave you from the previous post -- you're going to need to know all those Layouts presented that tutorial anyway. I try to use the default Layout on a Container if possible. I personally like the GridBagLayout, but it is much more difficult to use and understand than the other Layouts in the tutorial.
OP, don't think that any of these solutions come easy or fast -- there is a lot of studying and practicing to do. Try all the Layouts and see what happens, until you have no doubts about which one to use for your app. -
How to delete vertical space between two divs?
I have a very simple page right now. Top div holds an image. The div below it holds another image. Both divs appear to be adding space to the bottom. I know other's have had this issue - yet when searching the forum I'm not finding anything. I've added 0 for padding and margins.... I"m out of patience. Want to go back to tables (but I won't let those divs beat me!) help please? http://www.duenorthdesign.com/christmas
I even added a container around everythign to see if that would help and it didn't. And my height dimensions match my images exactly.
OK, found the answer after nearly 3 hours. Due to doctype html5 I used:
img {
vertical-align: bottom;
Just maybe this will help someone out there searching..... I went through about 50 attempts from reading posts before I stumbled on this one.duenorth09 wrote:
OK, found the answer after nearly 3 hours. Due to doctype html5 I used:
img {
vertical-align: bottom;
Here's another (simpler) fix for the entire page...
img {display:block;}
What this does is remove the space for the text descender that is attached to display:inline elements (lower case j, g, q, etc). -
Carriage Returns in HTML Code Creating Extra Spaces Between Elements
I've looked online all over and can't find the solution to my issue. I've found several pages explaining a similar event, but no solution.
When placing many divs next to each other, I would like to visually view the code as one div per line: (see image) To get this, I have to use hard returns in my code (this method makes editing a lot easier visually). But doing so adds extra spacing between the divs which turns a 3 column set of thumbnails to 2 colums. I can fix this if I adjust the physical margins between the divs, but this can't be the only fix.
The other fix is if I place the code back to back to back (see image): This makes the div's behave and appear as they should, but now the code is a visual mess because it's all cluttered.
What I want is to be able to use as many carriage returns in my code and for browsers to disregard these types of line breaks in the code. So essentially, how can I get away from these extra spaces when using hard returns in code?I think that both your pages have a missing </div> at the end somewhere.
Opps... that happened when I was stripping down the page to create a working example of my issue. I've fixed the missing div and re-uploaded both pages. The problem is still there.
Change display: inline; to float: left; and add margin: 0 0 4px 4px; (as shown below)
I had already tried using float, but something else in the code was forcing the columns to 2 instead of 3.
Have you used "Apply Source Formatting" ?
I use that religiously. I'm quite anal about visually clean code.
Well, I just fixed the problem while replying... funny... I removed the margins from the actual img element (.imageThumb img) and placed it on the div which surrounds the img (.imageThumb). I also reapplied the float. Thanks all for the help - it helped me rethink. But I could have sworn I had once placed the margins on .imageThumb before and it didn't work.
.imageThumb {
width: 100px;
height: 75px;
display: inline;
float: left;
margin: 0px 10px 10px 0px;
cursor: pointer;
.imageThumb img {
/*margin: 0px 10px 10px 0px;*/ -
Optional vertical space marker in CS4?
Hi,
Just wondering if anyone knows if there exists, in IDCS4, some sort of way
of creating vertical space between paragraphs that will not appear if the
paragraph happens to begin at the top of the page.
Obviously, until now I've been using paragraph styles. But some kind of
vertical space marker would be so much simpler. You could have one for a
half-line height, or a full-line height and just insert them as necessary.
If not, any workarounds except for paragraph styles?
Thanks,
Ariel
Win XPSP3, IDCS4MEYes. Harbs idea is simpler than mine, because you don't have to fiddle with
textwrap settings.
So to summarize:
1. disable Skip by leading in preferences.
2. make sure the text frame you're working in has "First Baseline" set to
exact or leading.
2. create a line the length of the gap you wish.
3. cut and paste it at the beginning of the paragraph above which a gap
should appear.
4. Set it to an "above line" anchored object (or better, create an object
style to do this at a keystroke)
(If at some stage the leading changes, with CS4 you can do a search and
replace for the length of the line.)
I think that's pratical enough to be useable.
Here's a quote from "The Complete Manual of Typography" by James Felici,
published by Adobe Press:
"Dedicated typesetting systems typically had a command that let you add a
vertical space band of whatever width werever you wanted. Such a space band
was an independent entity, not tied to any paragraph. The software
recoginized it as a role-playing spacing element, and when that role wasn't
required-[as at the beginning of a page]-it would ignore the vrtical space
band. Unfortunately, this facility has yet to find its way into popular
desktop systems."
But at least there's a workaround....
Thanks,
Ariel -
Vertical spacing between paragraphs
Hello experts,
I am having trouble closing up the space between a title and
a subtitle that needs to have a different style. I am usingCSS.
Line spacing seems to work only on the vertical space between
lines within a paragraph, not between paragraphs. This makes sense.
I have tried putting each element in its own table cell, each
with its own id, and playing with positive and negative margins and
padding. If there is a combination that would work, I would be glad
to hear it. At the moment my knowledge of margins and padding is
based almost totally on trial and error, not on comprehension.
My current work around is to keep the subtitle in the same
paragraph, put in a line break, and the style the subtitle. That
has given me a good result on my browser, but I'm not sure about
other browsers. Also, work arounds me nervous about creating other
problems I don't know about.
Can anyone give me the right solution, or at least critique
my work around solution?
Many thanks so much in advance for help.
Richardp { margin:0; }
Sorry it was so verbose.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"RTalbott" <[email protected]> wrote in
message
news:e8grgo$g4v$[email protected]..
> Hello experts,
> I am having trouble closing up the space between a title
and a subtitle
> that
> needs to have a different style. I am usingCSS.
>
> Line spacing seems to work only on the vertical space
between lines within
> a
> paragraph, not between paragraphs. This makes sense.
>
> I have tried putting each element in its own table cell,
each with its own
> id,
> and playing with positive and negative margins and
padding. If there is a
> combination that would work, I would be glad to hear it.
At the moment my
> knowledge of margins and padding is based almost totally
on trial and
> error,
> not on comprehension.
>
> My current work around is to keep the subtitle in the
same paragraph, put
> in a
> line break, and the style the subtitle. That has given
me a good result
> on my
> browser, but I'm not sure about other browsers. Also,
work arounds me
> nervous
> about creating other problems I don't know about.
>
> Can anyone give me the right solution, or at least
critique my work around
> solution?
>
> Many thanks so much in advance for help.
>
> Richard
> -
How to create invisible space between 2 boxes
I am trying to create a vertical space between 2 horizontal boxes in
a JPanel.
Following is the code sample i am using:
this.add(horizontalbox1,BorderLayout.NORTH);
this.add(Box.createVerticalStrut(3));
this.add(horizontalbox2,BorderLayout.CENTER);
this.add(Box.createVerticalStrut(3));
this.add(horizontalbox3,BorderLayout.SOUTH);
This doesn't work.
I tried using setBorder()to create empty Border method but that doesn't work too.Looks like you're mixing layouts of the 'this' JPanel. You should set it to be a BoxLayout instead of a BorderLayout if that's what it currently is. If the 'this' JPanel is a BorderLayout you can only add things to the NORTH, SOUTH, EAST, or WEST. Where are your struts being added? Try the following instead.
setLayout(new BoxLayout(contentPane, BoxLayout.Y_AXIS));
add(horizontalbox1);
add(Box.createVerticalStrut(3));
add(horizontalbox2);
add(Box.createVerticalStrut(3));
add(horizontalbox3);
Maybe you are looking for
-
Need help with links and fill color
Hi all, I just recently discovered liveCycle and am very impressed with it! I have been trying to make myself a homework calendar for a while now, and I have it done mostly, but there are a few more things I'd like to add that I don't know how to do.
-
I don't plan on buying said movies and songs again, and while I'm at it, why are the songs that are in my purchase history out of order? I don't trust that at all....
-
Has The Updated Airplay Direct Been Done
This is from Mac Rumors, it appeared several months back Apple is planning an improvement to its AirPlay audio and video streaming technology, according to a report from The Telegraph. The new AirPlay system would allow streaming devices like the iPh
-
Working around broken child/sibl​ing classes
I need some suggestions for working around broken classes in my class hierarchy. Here is my situation: I have an application which makes use of "plug-ins" to implement the program's functions. Each plug-in is a member of a common parent class calle
-
Details of Conc Requests for which a Program ran for Specific Template
We have a Concurrent Program and associated Data definition for XML report. We have TWO Templates attached to the Data Definition. We would like to know the Concurrent Reuqest ID of the CONC Program which ran for a Specific TEMPLATE. We are using the