Console access Cisco 1113 ACS
We have a new ACS and cannot access the device thru the console. I am using TeraTerm and I can see the characters but it is a bunch of garble almost like the terminal settings are incorrect. I have 8 1 and no parity for the Serial port settings. Has anyone run into this? If so, how did you get it solved? Thanks.
I got it to the login screen now but do not know what the Admin password is?? Is there a default login initially for this device? I found documentation on how to change it but you need to be in the device first. Thanks
Similar Messages
-
Looking for successful auth debug between cisco 1113 acs 4.2 and Active Directory
Hello,
Does anyone have a successful authentication debug using cisco 1113 acs 4.2 and Active Directory? I'm not having success in setting this up and would like to see what a successful authentication debug looks. Below is my current situation:
Oct 6 13:52:23: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:23: TPLUS: processing authentication start request id 444
Oct 6 13:52:23: TPLUS: Authentication start packet created for 444()
Oct 6 13:52:23: TPLUS: Using server 110.34.5.143
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT: socket event 2
Oct 6 13:52:23: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
Oct 6 13:52:23: T+: session_id 763084134 (0x2D7BBD66), dlen 26 (0x1A)
Oct 6 13:52:23: T+: type:AUTHEN/START, priv_lvl:15 action:LOGIN ascii
Oct 6 13:52:23: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:12 (0xC) data_len:0
Oct 6 13:52:23: T+: user:
Oct 6 13:52:23: T+: port: tty515
Oct 6 13:52:23: T+: rem_addr: 10.10.10.10
Oct 6 13:52:23: T+: data:
Oct 6 13:52:23: T+: End Packet
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT: wrote entire 38 bytes request
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: Would block while reading
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 16bytes data)
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: read entire 28 bytes response
Oct 6 13:52:23: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
Oct 6 13:52:23: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:23: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:10, data_len:0
Oct 6 13:52:23: T+: msg: Username:
Oct 6 13:52:23: T+: data:
Oct 6 13:52:23: T+: End Packet
Oct 6 13:52:23: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:23: TPLUS: Received authen response status GET_USER (7)
Oct 6 13:52:30: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:30: TPLUS: processing authentication continue request id 444
Oct 6 13:52:30: TPLUS: Authentication continue packet generated for 444
Oct 6 13:52:30: TPLUS(000001BC)/0/WRITE/46130160: Started 5 sec timeout
Oct 6 13:52:30: T+: Version 192 (0xC0), type 1, seq 3, encryption 1
Oct 6 13:52:30: T+: session_id 763084134 (0x2D7BBD66), dlen 15 (0xF)
Oct 6 13:52:30: T+: AUTHEN/CONT msg_len:10 (0xA), data_len:0 (0x0) flags:0x0
Oct 6 13:52:30: T+: User msg: <elided>
Oct 6 13:52:30: T+: User data:
Oct 6 13:52:30: T+: End Packet
Oct 6 13:52:30: TPLUS(000001BC)/0/WRITE: wrote entire 27 bytes request
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 16bytes data)
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: read entire 28 bytes response
Oct 6 13:52:30: T+: Version 192 (0xC0), type 1, seq 4, encryption 1
Oct 6 13:52:30: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:30: T+: AUTHEN/REPLY status:5 flags:0x1 msg_len:10, data_len:0
Oct 6 13:52:30: T+: msg: Password:
Oct 6 13:52:30: T+: data:
Oct 6 13:52:30: T+: End Packet
Oct 6 13:52:30: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:30: TPLUS: Received authen response status GET_PASSWORD (8)
Oct 6 13:52:37: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:37: TPLUS: processing authentication continue request id 444
Oct 6 13:52:37: TPLUS: Authentication continue packet generated for 444
Oct 6 13:52:37: TPLUS(000001BC)/0/WRITE/46130160: Started 5 sec timeout
Oct 6 13:52:37: T+: Version 192 (0xC0), type 1, seq 5, encryption 1
Oct 6 13:52:37: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:37: T+: AUTHEN/CONT msg_len:11 (0xB), data_len:0 (0x0) flags:0x0
Oct 6 13:52:37: T+: User msg: <elided>
Oct 6 13:52:37: T+: User data:
Oct 6 13:52:37: T+: End Packet
Oct 6 13:52:37: TPLUS(000001BC)/0/WRITE: wrote entire 28 bytes request
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 33bytes data)
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: read entire 45 bytes response
Oct 6 13:52:37: T+: Version 192 (0xC0), type 1, seq 6, encryption 1
Oct 6 13:52:37: T+: session_id 763084134 (0x2D7BBD66), dlen 33 (0x21)
Oct 6 13:52:37: T+: AUTHEN/REPLY status:7 flags:0x0 msg_len:27, data_len:0
Oct 6 13:52:37: T+: msg: Error during authentication
Oct 6 13:52:37: T+: data:
Oct 6 13:52:37: T+: End Packet
Oct 6 13:52:37: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:37: TPLUS: Received Authen status error
Oct 6 13:52:37: TPLUS(000001BC)/0/REQ_WAIT/46130160: timed out
Oct 6 13:52:37: TPLUS(000001BC)/0/REQ_WAIT/46130160: No sock_ctx found while handling request timeout
Oct 6 13:52:37: TPLUS: Choosing next server 101.34.5.143
Oct 6 13:52:37: TPLUS(000001BC)/1/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:37: TPLUS(000001BC)/46130160: releasing old socket 0
Oct 6 13:52:37: TPLUS(000001BC)/1/46130160: Processing the reply packet
Oct 6 13:52:49: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:49: TPLUS: processing authentication start request id 444
Oct 6 13:52:49: TPLUS: Authentication start packet created for 444()
Oct 6 13:52:49: TPLUS: Using server 172.24.5.143
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT: socket event 2
Oct 6 13:52:49: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
Oct 6 13:52:49: T+: session_id 1523308383 (0x5ACBD75F), dlen 26 (0x1A)
Oct 6 13:52:49: T+: type:AUTHEN/START, priv_lvl:15 action:LOGIN ascii
Oct 6 13:52:49: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:12 (0xC) data_len:0
Oct 6 13:52:49: T+: user:
Oct 6 13:52:49: T+: port: tty515
Oct 6 13:52:49: T+: rem_addr: 10.10.10.10
Oct 6 13:52:49: T+: data:
Oct 6 13:52:49: T+: End Packet
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT: wrote entire 38 bytes request
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: Would block while reading
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 43bytes data)
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: read entire 55 bytes response
Oct 6 13:52:49: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
Oct 6 13:52:49: T+: session_id 1523308383 (0x5ACBD75F), dlen 43 (0x2B)
Oct 6 13:52:49: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:37, data_len:0
Oct 6 13:52:49: T+: msg: 0x0A User Access Verification 0x0A 0x0A Username:
Oct 6 13:52:49: T+: data:
Oct 6 13:52:49: T+: End Packet
Oct 6 13:52:49: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:49: TPLUS: Received authen response status GET_USER (7)
The 1113 acs failed reports shows:
External DB is not operational
thanks,
jamesHi James,
We get External DB is not operational. Could you confirm if under External Databases > Unknown User Policy, and verify you have the AD/ Windows database at the top?
this error means the external server might not correctly configured on ACS external database section.
Another point is to make sure we have remote agent installed on supported windows server.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289013
Also provide the Auth logs from the server running remote agent, e.g.:-
AUTH 10/25/2007 15:21:31 I 0376 1276 External DB [NTAuthenDLL.dll]:
Attempting Windows authentication for user v-michal
AUTH 10/25/2007 15:21:31 E 0376 1276 External DB [NTAuthenDLL.dll]: Windows
authentication FAILED (error 1783L)
thanks,
Vinay -
Reimage cisco 1113 ACS - NIC driver
HI,
I tried to re-image a cisco 1113 ACS appliance into windows 2003 and was successful. I suppose to use this for my staging/LAB.My only problem is the NIC cards shows unknown since no appropraite driver was found. Googled for a few days but ends up nothing. Does anybody knows the exact driver? Appreciate anybody's reply.
Thanks.Just for everybody's info.
I manage to download the NIC driver. It is a Generic Broadcom NetXtreme Gigabit Ethernet.
Now it is working fine. -
Cisco 1113 ACS 4.2 1113 configure auth. for Infoblox appl.
Hi there,
I have an issue with Cisco ACS and an Infoblox appliance. We want to authenticate users, that login on the Infoblox, via the Cisco ACS. After that the ACS should reply with a passed (RADIUS) authentication and reply with an administrative groupname that the user belongs on the Infoblox. To do this I have to import a VSA to have the option in the ACS to reply with this groupname. On the Infoblox these groups are allready made and this must match the group that the ACS replies.
Now I have imported the VSA and configured an AAA client (infoblox) to use the new RADIUS (VSA) to support the Infoblox. In the groupsetting I've turned on the Infoblox-Group_info attribute and filled in a specific groupname that the authenticated user belongs to. Now here comes the part where the group info is returned, but the Infoblox Appliance gives me a RADIUS error reply message. As I can see in the logs of the ACS the authentication part of the user is fine. So it has to be between the info that the ACS replies with, when the user logs in.
I've attach the VSA and a *.pcap of wireshark to see what's going on.
Can anyone advice of suggest any option that can make this thing work.
With regards,
Richard GosenHalijenn,
Unfortunatly the above solution doesn't do the trick. When I delete the imported VSA, via the attached *.csv, the Infoblox attributes still shows up when I re-add the Infoblox appliance to a network device group en there choose "Radius (Infoblox)" for the authentication. After deleting the VSA I have restarted the ACS SE. The returned acknowledgment from the ACS still presents a malformed packet. When I uncheck the checkbox of the "RADIUS (Infoblox)" attribute in the group settings, then it shows no malformed packet, but no group information is sent either.
Again I have imported the original accountsAction.csv and restarted the SE, but it still returns malformed packets.
Any other possibilities?
Kind regards,
Richard Gosen -
Cisco Secure ACS 4.2 for Windows web-based Admin Console log in problems
To Whomever Can Assist,
I am running two deployments of Cisco Secure ACS for Windows 4.2 and I can login into the admin web-console just fine. However, when I create a new or test user that mirror my configuration that user cannot login to the admin web-console. The user can login it to devices with the appropriate privileges, but can't administer his/her account within ACS. This has proven very problematic and needs a remedy. Thanks for the assistance.Bradbryant.dhs,
Where are you creating the new admin user who should have access to ACS web gui under internal users or administration.
Internal user and ACS administrator accounts are completely different.
Adding administrator account
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4-2/user/guide/ACS4_2UG/Admin.html
Regards,
Jatin Katyal
** Do rate helpful posts ** -
Upgrade path for Cisco Secure ACS 4.X Solution Engine 1113 Appliance.
Hello,
I am having Cisco Secure ACS 4.X Solution Engine 1113 Appliance, and is running on version Cisco Secure ACS Release 4.1(1) Build 23 and now want to upgarde it to the latest version. Need to know the upgrade path for the same. As per my information ACS 4.1(1) runs on windows server and releases post to 5.X uses Linux. Please guide how can i upgrade Appliance 1113 from 4.1 to 5.xHi,
Cisco ACS 1113 appliance doesn't support ACS 5.x version. 1113 appliance supports till ACS 4.2.1 version.
Cisco ACS SE 1120/1121 appliance models are required for ACS 5.x
The upgrade path for ACS 4.1 to 4.2.1 version can be found in the following link :
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2.1/Installation_Guide/solution_engine/upgap.html#wp1237189
Regards,
Karthik Chandran
*kindly rate helpful post* -
Cisco Secure ACS 4.0 Solution engine problem
Hi,
I have a probleme with a Cisco Secure ACS 4.0 Solution Engine (CSACSE-1113-K9).
I try to power up the engine, but the light in the power button stay blinking all the time. Anyone have a idea why ?
Last week, I boot it for the first time (It's brand new), every things goes fine.
I made " shutdown " then wait the message to press 4 seconds power button to turn it off. This morning, nothing come up.
I see one thing in the console "Press <SpaceBar> to update BIOS." after that, blank. No bios detection, no harddrive dectection, no windows boot.
Any idea ?
Thank youNo, I'm sur.
Then we have version 1113 of ACS.
See: http://www.cisco.com/application/pdf/en/us/guest/products/ps6731/c2001/ccmigration_09186a008068f7bd.pdf
Page 32(1-8) #2.
I let the engine off about 6hours after my first post, then I try back. The engine start.
What can cause this problem ? -
Cisco Secure ACS 4.2 with Oracle
hi there...
Our campus using WisM (WS-SVC-WISM-1-K9) as wireless controller , Cisco 1130 access point and Cisco Secure ACS 4.2 Solution Engine 1113 Appliance as radius server. For username and password, ACS will export the data from Oracle database(production DB).
The problem that we are facing right now is password that store in oracle database is in encrypted format. Base feedback from our database administrator, the encryption is done by oracle - application layer and cannot be decrypt back. In Oracle they call it "Oracle Stored Procedures"
My questions :
1- Can Cisco Secure ACS 4.2 work with Oracle 10G or 11G?
2- Is there any option to tackle the encrypted password? Can ACS handle the "Oracle Stored Procedures" function?
Please advice.
ThanksMicrosoft SQL Server and Case-Sensitive Passwords
If you want your passwords to be case sensitive and are using Microsoft SQL Server as your ODBC-compliant relational database, configure your SQL Server to accommodate this feature. If your users are authenticating by using PPP via PAP or Telnet login, the password might not be case sensitive, depending on how you set the case-sensitivity option on the SQL Server. For example, an Oracle database will default to case sensitive, whereas Microsoft SQL Server defaults to case insensitive. However, in the case of CHAP/ARAP, the password is case sensitive if you configured the CHAP stored procedure.
For example, with Telnet or PAP authentication, the passwords cisco or CISCO or CiScO will all work if you configure the SQL Server to be case insensitive.
For CHAP/ARAP, the passwords cisco or CISCO or CiScO are not the same, regardless of whether the SQL Server is configured for case-sensitive passwords.
Sample Routine for Generating a PAP Authentication SQL Procedure
The following example routine creates a procedure named CSNTAuthUserPap in Microsoft SQL Server, the default procedure that ACS uses for PAP authentication. Table and column names that could vary for your database schema appear in variable text. For your convenience, the ACS product CD includes a stub routine for creating a procedure in SQL Server or Oracle. For more information about data type definitions, procedure parameters, and procedure results, see ODBC Database.
if exists (select * from sysobjects where id = object_id (`dbo.CSNTAuthUserPap') and
sysstat & 0xf = 4)drop procedure dbo.CSNTAuthUserPap
GO
CREATE PROCEDURE CSNTAuthUserPap
@username varchar(64), @pass varchar(255)
AS
SET NOCOUNT ON
IF EXISTS( SELECT username
FROM users
WHERE username = @username
AND csntpassword = @pass )
SELECT 0,csntgroup,csntacctinfo,"No Error"
FROM users
WHERE username = @username
ELSE
SELECT 3,0,"odbc","ODBC Authen Error"
GO
GRANT EXECUTE ON dbo.CSNTAuthUserPap TO ciscosecure
GO
Sample Routine for Generating an SQL CHAP Authentication Procedure
The following example routine creates in Microsoft SQL Server a procedure named CSNTExtractUserClearTextPw, the default procedure that ACS uses for CHAP/MS-CHAP/ARAP authentication. Table and column names that could vary for your database schema appear in variable text. For more information about data type definitions, procedure parameters, and procedure results, see ODBC Database.
if exists (select * from sysobjects where id = object_id(`dbo.CSNTExtractUserClearTextPw')
and sysstat & 0xf = 4) drop procedure dbo.CSNTExtractUserClearTextPw
GO
CREATE PROCEDURE CSNTExtractUserClearTextPw
@username varchar(64)
AS
SET NOCOUNT ON
IF EXISTS( SELECT username
FROM users
WHERE username = @username )
SELECT 0,csntgroup,csntacctinfo,"No Error",csntpassword
FROM users
WHERE username = @username
ELSE
SELECT 3,0,"odbc","ODBC Authen Error"
GO
GRANT EXECUTE ON dbo.CSNTExtractUserClearTextPw TO ciscosecure
GO
Sample Routine for Generating an EAP-TLS Authentication Procedure
The following example routine creates in Microsoft SQL Server a procedure named CSNTFindUser, the default procedure that ACS uses for EAP-TLS authentication. Table and column names that could vary for your database schema appear in variable text. For more information about data type definitions, procedure parameters, and procedure results, see ODBC Database.
if exists (select * from sysobjects where id = object_id(`dbo.CSNTFindUser') and
sysstat & 0xf = 4) drop procedure dbo.CSNTFindUser
GO
CREATE PROCEDURE CSNTFindUser
@username varchar(64)
AS
SET NOCOUNT ON
IF EXISTS( SELECT username
FROM users
WHERE username = @username )
SELECT 0,csntgroup,csntacctinfo,"No Error"
FROM users
WHERE username = @username
ELSE
SELECT 3,0,"odbc","ODBC Authen Error"
GO
GRANT EXECUTE ON dbo.CSNTFindUser TO ciscosecure
GO
Reference:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/d.html#wp355420 -
Hey guys,
I am unable to access cisco asa device using https and cannot lunch asdm, after recent power failure at our location. I have asdm installed on my machine and whenever i try to access the asdm, receive Error: unable to lunch device manager from X.X.X.X The following is log from java console
Trying for ASDM version file; url = https://x.x.x.x/admin/
javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
When i try to access it from the browser it show error message
"The connection was interrupted"
I am running CISCO ASA 8.3 (1)
with asdm image as asdm 7.1.3
JAVA version installed Java 7 update 71
I have added the https:> to exception site list and set security level to medium,
even ssh access is not working !!
I would appreciate if anyone can help me out!!
Thanks
FareedHey lcaruso,
thanks for information!!
i was able to connection through console as suggested and regenerated the rsa key .. was able to connection through ssh, but the issue with the asdm or web access was not resolved.
I have tried few of the steps as suggested on
https://supportforums.cisco.com/document/49741/asa-pixfwsm-unable-manage-unit-sshtelnetasdm#collect_captures
capture output
ZHHFP-FIREWALL1(config)# sh cap capin
139 packets captured
1: 18:50:17.654720 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: S 2567327150:2567327150(0) win 8192 <mss 1260,nop,wscale 8,nop,nop,sackOK>
2: 18:50:17.654812 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: S 590825877:590825877(0) ack 2567327151 win 8192 <mss 1380>
3: 18:50:17.655621 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: . ack 590825878 win 65520
4: 18:50:17.656078 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: P 2567327151:2567327332(181) ack 590825878 win 65520
5: 18:50:17.656139 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: . ack 2567327332 win 8192
6: 18:50:17.656475 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: FP 590825878:590825878(0) ack 2567327332 win 8192
7: 18:50:17.657696 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: . ack 590825879 win 65520
8: 18:50:17.657802 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: F 2567327332:2567327332(0) ack 590825879 win 65520
9: 18:50:17.657848 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: . ack 2567327333 win 8192
10: 18:50:17.658108 802.1Q vlan#1 P0 192.168.160.113.58085 > 192.168.160.126.8
443: S 1351758892:1351758892(0) win 8192 <mss 1260,nop,wscale 8,nop,nop,sackOK>
also i have downgraded the java to 1.6_45 but still not luck.
error message i received on java console
Trying for IDM. url=https://x.x.x.x/idm/idm.jnlp/
javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
at sun.security.ssl.SSLSocketImpl.readRecord(Unknown Source)
at sun.security.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at com.cisco.launcher.w.a(Unknown Source)
at com.cisco.launcher.s.for(Unknown Source)
at com.cisco.launcher.s.new(Unknown Source)
at com.cisco.launcher.s.access$000(Unknown Source)
at com.cisco.launcher.s$2.a(Unknown Source)
at com.cisco.launcher.g$2.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.EOFException: SSL peer shut down incorrectly
at sun.security.ssl.InputRecord.read(Unknown Source)
... 15 more
Any help would be highly appreciated!!
Thanks
Fareed -
How to do .1x port based network access authentication through ACS
How to do .1x port based network access authentication through ACS.
Hi,
802.1x can authenticate hosts either through the username/password or either via the MAC address of the clients (PC's, Printers etc.). This process is called Agentless Network Access which can be done through Mac Auth Bypass.
In this process the 802.1x switchport would send the MAC address of the connected PC to the radius server for authentication. If the radius server has the MAC address in it's database, the authentication would be successful and the PC would be granted network access.
To check the configuration on the ACS 4.x, you can go to http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/configuration/guide/noagent.html
To check the configuration on an ACS 5.x, you can go to http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-2/user/guide/acsuserguide/common_scenarios.html#wp1053005
Regards,
Kush -
Hi all,
With the Base license, a Cisco Secure ACS 5.6 appliance or software virtual machine can support the deployment of up to 500 network access devices (NADs) such as routers and switches. These are not authentication, authorization, and accounting (AAA) clients. The number of network devices is based on the number of unique IP addresses that are configured.
So, when i have 1 firewall for vpn gateway, and using acs as an aaa server, how much network access device which is counted ? 1 or as many as vpn client connected to the firewall ?
500 network access device means concurrent connection or not ?ACS is based on the number of NADs (Network Access Devices) like switches, routers, ASAs, etc. So in your example, your Firewall will consume 1 license regardless of the total number of VPN sessions.
With ISE, the licenses are based on the total number of endpoints. So in your example, each VPN session will take a license.
I hope this helps!
Thank you for rating helpful posts! -
Reporting & Audit Compliance Solutions for Cisco Secure ACS
The Cisco Secure ACS Access Control Server is probably the worlds best selling remote access security solutions and its quite likely that you're already using it! Wouldn't it be great to know exactly what it was doing? Further still, when you have to provide audit documentation regarding your policies and how effective they are, how long does this take and what valuable data remains locked inside the ACS database and logs?
extraxi offer a range of products that deliver a complete solution for harvesting, managing and analyzing your ACS/SBR log data to meet the increasing demands for regulatory compliance (SOX, COBIT) and overall enterprise monitoring and security.
We are proud to supply customers including Intel, Ford, Lego, T-Mobile, US Dept of State, US Army, British Telecom, First Energy, TNT Express, Kodak and JP Morgan and many more so why not take a look at our industry leading solutions and evaluate the benefits for your organization...
Featured Products:
* aaa-reports! enterprise edition - Automated Reporting
The best reporting system for Cisco Secure ACS and Funk SBR just got a whole lot better! Improved reports, enhanced filtering and query builder and now with up to 48GB internal storage based on SQL Server technology makes this the ideal solution for large or complex AAA deployments and those that need the additional functionality from the standard aaa-reports! tool.
With aaa-reports! enterprise you have a complete application for reporting including many canned reports (each with flexible filtering options) and a point-n-click query builder for designing custom reports.
For historic trending, forensics and audit compliance there simply is no better reporting application for Cisco Secure ACS or Funk/Juniper SBR.
* csvsync - Automated ACS Database & Log File Collection
csvsync allows you to download CSV log data (RADIUS, TACACS+, Passed/Failed Attempts etc) directly from any number of Cisco Secure ACS servers (Windows & Appliance) via http(s). Version 3.0 now supports the collection of ACS database itself for import into aaa-reports and detailed reporting based on the ACS security policies. Simple, secure and efficient, csvsync is the best solution for harvesting log data from your Cisco Secure ACS servers.
Download fully working 60 day trial versions at http://www.extraxi.com/rq.asp?utm_source=technet&utm_medium=forum
Fore more information please visit http://www.extraxi.com/?utm_source=technet&utm_medium=forumbump
-
Cisco Secure ACS 4.2 - Group Setup w/Shell Command Authorization Sets
Hello All,
I am trying to create a user so that I can provide him only to run commands that I have designated them to run within my "Shell Command Authorization Set". This seems to work great, however I cannot find anywhere I can "hide" commands they do not have access to. For instance, once the user is logged into the switch they can do a show ? and get a list of commands. I would like to know if there is an option to only display commands the user has access to in ACS.
My Steps:
Created a user in ACS
Shared Profile Components
Create Shell command Autorization Set - "ReadOnly"
Unmatched Commands - Deny
Unchecked - Permit Unmatched Arg
Commands Added
permit interface
permit vlan
permit snmp contact
permit power inline
permit version
permit switch
permit controllers utilization
permit env all
permit snmp location
permit ip http server status
permit logging
Created a group - "GroupTest" with the following
Confirgured - Network Access Restrictions (NAR)
Max Sessions - Unlimited
Enable Options - No Enable Privilege
TACACS+ Settings
Shell (exec)
Priviledge level is check with 1 as the assigned level
Shell Command Authorization Set
"ReadOnly" - Assign a Shell Command Authorization Set for any network device
I have configured following on my Router/Switch
aaa authorization config-commands
aaa authorization commands 1 default group tacacs+ if-authenticated
privilege exec level 1 show log
I have attached below the documention I have gone over.
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/GrpMgt.html#wp478624"you are testing with privilege level 15 or below 15. Because when you are using below 15 level user, first it will check local command authorization set. For example if you want to execute sh runn command with level 5 user, first it will check local command set. If the sh runn command exits in local command set then it will send request to ACS. If it is not in the command set, it won't send request to ACS. That's why you don't see debug. For 15 level users it will directly send request to ACS. Configure command set locally and try it should work.
Correct me if I am wrong."
Regards
Vamsi -
Cisco Secure ACS with UCP assistance and enable password
I am running Cisco Secure ACS version 4.2 running on a
Standalone Windows 2003 Enterprise 2003with the lastest
windows service pack and update. Secure ACS is running
fine and I can authenticate with Cisco routers and
switches. The Windows 2003 server is also running Microsoft
IIS Server. In other words, the IIS server and Cisco
Secure ACS is running on the same windows 2003 server.
I am trying to get Cisco User-Changeable password to work
with Cisco Secure ACS. I followed the release notes lines
by lines and the work around provided below:
Also server require more privileges for the internal windows user that runs CSusercgi.exe.
The name of the windows user that runs UCP is IUSR_<machine_name>.
Workaround steps:
1) Install UCP 4 on a machine that runs IIS server.
2) Open IIS manager
3) Locate Default Web Site
4) Double click on the virtual name 'securecgi-bin'
5) Right click on CSusercgi.exe and choose Properties
6) Choose 'File Security' tab
7) Choose 'Edit' in 'Authentication and access control' area
8) Change username from IUSR_<machine_name> to 'Administrator' and enter his
password (make sure that 'Integrated Windows authentication' is checked)
I still can NOT get this to work. I got this error:
It says:
The page cannot be found
The page you are looking for might have been removed,
had its name changed, or is temporarily unavailable.
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)
I modified everything in the Windows 2003 to be "ALLOWED" by
EVERYONE. In other words, there are NO security on the windows 2003.
It is still NOT working.
The other question I have is that can Cisco UCP allow user
to change his/her enable password?
Can someone help? Thanks.Yes bastien,
Thank you.
But one thing more i want to know that in its Redundant AAA server, when i try to open IIS 6.0 window 2003; it prompts for Username and Password.
I've given it several time; also going through Administrator account with administrative credentials but it always failed.
Any suggestions/solution/?
This time many thanks in advance.
Regards
Mehdi Raza -
Advice for Buying Cisco Secure ACS 3.3 for Windows
Just need advice on what other things I NEED to order apart from the Windows server when I want to iplement ACS and I want to use CISCO SECURE ACS 3.3 FOR WINDOWS
Hope someone will helpHi,
This is all what you require:
Supported Operating System
Cisco Secure ACS for Windows Servers 3.3 supports the Windows operating systems listed below. Both the operating system and the service pack must be English-language versions.
Windows 2000 Server, with Service Pack 4 installed
Windows 2000 Advanced Server, with the following conditions:
with Service Pack 4 installed
without features specific to Windows 2000 Advanced Server enabled
Windows Server 2003, Enterprise Edition
Windows Server 2003, Standard Edition
Note The following restrictions apply to support for Microsoft Windows operating systems:
We have not tested and cannot support the multi-processor feature of any supported operating system.
We cannot support Microsoft clustering service on any supported operating system.
Windows 2000 Datacenter Server is not a supported operating system.
Please refer to the following link for more information:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs33/win33sdt.htm
Thanx & Regards
Maybe you are looking for
-
I tried to follow the instructions for downloading previoulsly purchased movies. The instructions do not seem accurate for my computer. I cannot seem to find previously purchased movies. Further, there are multiple copies (of the same movie) on my co
-
Can't update my apps after updating to IOS 5.1.1
I updated my phone to the IOS 5.1.1. Then I tried to update my apps on my iphone 4S. After I put my password in, an unknown error box comes up. I press retry and the same box comes up. Has anyone else come up with this problem? Does anyone have a pos
-
"No disk detected" when trying to restore Server Backup Image to a virtual hard disk
hello, I have a server 2012 running hyper-v I've created a new VHD and started the process of a windows restore. The restore process picks up the backup drive and can see the backup that i want to restore. The backup is of a Windows installation take
-
Initializing Factory class with Digital Signature
Hi All, I am trying to Initialize the Factory class using digital signature. These are the steps I fallowed. 1. Created a Java application "Application1" in Jdeveloper. 2. Copied config, ext, lib folder from the Design console directory to the Applic
-
UTF16 equivalent of Control A as delimiter in BCP
Hi, I'm creating data extract using BCP which will be consumed by Hive. Hive by default understands Control A (0x01) as delimiter. When I create bcp output in -c mode and provide 0x01 as delimiter and try opening it, I can read the output file in not