Console cannot connect to ldap after SSL config

Hi,
I configured our iplanet DS 5.0 to use SSL (requested cert from DS, signed and created a new cert with openSSL, verified that DS could read that cert, and turned on ssl). Restarted DS and admin-serv. The ldap is working but ldaps is not. The console is unable to connect to DS and just hangs when trying to connect. The console is configured to connect to ldap not ldaps, but when I view the configuration for DS in console it shows port 636. So -
- how do I make the console use port 389 to connect to the DS?
- What do I need to do to get ldaps working?
TIA.
Raj Dolas

There are some limitations in using the Console when SSL is enabled for the Directory Server. These are documented... in the release notes at least.
Regards,
Ludovic.

Similar Messages

ODI Client cannot connect the datebase after the datebase IP changed

ODI Client cannot connect the datebase after the datebase IP changed.
1,the datebase on mac A,the mac changed ip
2,on the client, tnsping db is ok.
3,use pl/sql ,can connect on the db
4,with odi,changed the repostry URL to the new db IP,throw the exception below
java.sql.SQLException: Io Exception: The Network Adapter could not establish the connection
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
     at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
     at com.sunopsis.sql.h.run(h.java)
Is anything we need to config after change db machine IP?

yeah,I got it.Everything is ok now.
After change IP,we must open TopologyManager:change the JDBC connection of workrepository which must chose in Designer.
when we open the Designer ,it will connect to db.then coonect to workrepository with original IP.So,we must rechange workrepository's JDBC first!

FCS Not Updating from WSUS / Cannot open MOM Console / Cannot connect to MOM DB

Hi,
My original problem was that FCS was not updating from WSUS. Then after reading up, and trying a whole lot of different things I managed to break it further. Now I cannot open the Microsoft Forefront Client Security Console on the management server, The
Administrator Console and the Operator Console cannot connect to the Management server (They are on the management server)
As a side note: The reporting hasn't worked at all, not even after the last Systems Admin reloaded the whole FCS implementation.
I need assistance to get everything working again, and I think it might take a while to get everything resolved.
I don't know what information to provide so here is some to start with:
I believe this is a on server topology:
1. There is the management server, with all the roles except the "distribution" role installed.
2. The updates to FCS are set to go through our WSUS server.
3. The WSUS server works fine in all regards except to push the FCS updates through (I release other MS updates every week and they all go through)
4. Management server is 32-bit Windows Server 2008 Standard with SP1, with Microsoft Operations Manager 2005 (Unsure of SP1 is installed, but I think it is), and Microsoft SQL Server 2005 (It doesn't have the SQL Studio thing)
5. I have domain admin credentials
6. When opening the Microsoft Forefront Client Security console it crashes with a "MMC has detected an error in a snap-in and will unload it". Clicking on ok gives a new error page of exception: "System.Reflection.TargetInvocationException"
7. Opening the Operator console give a message of "Error connecting to server" and clicking on ok brings up the console settings where you specify the MOM management server etc
8. Opening the Administrator conolse immediately brings up the "Connect to a different MOM Management Server" window.
I am hoping that someone here can ask the right questions and helped get through all these issues to get this system working again

Thanks Quan and Faron for your replies. Firstly, when I logged into the server today and tried to open the consoles, the FCS console did not give me an error. Before I originally posted my message I already downloaded and tried that hotfix. The problem is
there is no SQL Management Studio. Microsoft SQL Server 2005 is installed.
The only error that really stands out is this one under the application logs:
Source: Microsoft Operations Manager
Event ID: 20607
The Data Access Server (DAS) on computer SSCIS04 returned an error. System error code: -2147217770 System error text: IDispatch error #3222 DAS method called: ConfigurationGetOnePointFreeSpace Called from file: d:\bt\4\private\product\core\engine\managers\perfcountermanager\src\momperfcountermanager.cpp
Called from line: 984 Other than that there are some terminal server printer errors and print spooler errors (which are common on pretty much all our servers), and Heartbeat errors (Event ID: 21213: Heartbeat update failed for 1 or fewer agents. Error details:
IDispatch error #3222)
I have just checked again and the FCS console is still opening without error. And I can start a scan. (No clients report back to the server though)

I have several iPod touches and there is always one that cannot connect to wifi. after several weeks it usually rights itself. what is going on?

I have several iPod touches and there is always one that cannot connect to wifi. after several weeks it usually rights itself. what is going on?

Matthew...
Try here > iOS: Troubleshooting Wi-Fi networks and connections

Cannot connect to iTunes after iOS6 install

Cannot connect to iTunes after iOS6 install. Tried to reset date forward as others have suggested, has not worked. Any other idea's solutions out there?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Help! I cannot connect Itunes store after my ipad 1 use ios5! Does anyone have a similar problem?

help! I cannot connect Itunes store after my ipad 1 use ios5! Does anyone have a similar problem?

Same :(
Do you have any problem with apps? I can download or update apps without problem. Also no problem with podcasts, but no music, no video or movie: cannot connect to iTunes Store :(

TS1368 cannot connect itune store after update ios 6

cannot connect itune store after update ios 6

Hello Dannard Lee,
It sounds like you aren't able to connect to the iTunes Store, or update your device to iOS 8. I would use the troubleshooting from the following article to help troubleshoot the issue, and it seems to be they may be related to one another:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Thank you for using Apple Support Communities.
Regards,
Sterling

Cannot connect to Database after install Developer Suite

Help..
I installed Oracle Database and everything seems work properly. I can connect to the database. (system/oracle@orcl)
well, but after I install the developer suite, I can't connect to the database anymore.
I did check the services and both OracleOraDb10g_home1TNSListener and OracleServiceORCL are started.
I try to search help from google but I cannot solve the problem by myself. I also include two ora file below,
tnsnames.ora
=====
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
====
listener.ora
===
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
====
everything seems should working properly but I still have problem cannot connect to the database. SQLPlus says "ORA-12154" and "ORA-12514"
please help me.. I need to finish my project within next 2 weeks or I have to study one more year. T_T

Hi ...
The Oracle Doc points out as actions in this type of error:
- If you are using local naming (TNSNAMES.ORA file):
- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
- Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
- If you are using directory naming:
- Verify that "LDAP" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Verify that the LDAP directory server is up and that it is accessible.
- Verify that the net service name or database name used as the connect identifier is configured in the directory.
- Verify that the default context being used is correct by specifying a fully qualified net service name or a full LDAP DN as the connect identifier
- If you are using easy connect naming:
- Verify that "EZCONNECT" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Make sure the host, port and service name specified are correct.
- Try enclosing the connect identifier in quote marks. See the Oracle Net Services Administrators Guide or the Oracle operating system specific guide for more information on naming.According to the above and my LISTENER settings in listener.ora file which is...
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
)there is one ')' missing closing parenthesis....
So , modify your LISTENER settings ... according to the below....The difference is the ')' in bold....
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
Can you connect now.....????
Regards,
Simon

Console cannot connect to Admin Server in a local network

Hi,
This issue may has been asked before, but I didn't find corresponding answer. So I ask again:
The Directory server 5.2 P4 is running on Windows XP and a console running on the same server (192.168.1.80) works fine. However second console which is running on 192.168.1.50 can not connect to admin server. Error message is:
Cannot connect to the Admin Server "http://homeserver.keiban.com:5201/" The URL is not correct or the server is not running.
I noticed that if I use http://192.168.1.80:5201 to connect admin server instead of http://homeserver.keiban.com, it took 10 seconds to show Initialization Failure:
Connect connect to the Directory Server "ldap://homeserver.keiban.com:5200" LDAP error: failed to connect to server ldap://homeserver.keiban.com;5200 Would you like to attemt to restart the Directory Server?
In Control Panel -> Windwos Firewall -> Exceptions, I have added port number 5201 for Sun ONe Admin Server 5.2 on TCP.
In etc/host file, an entry is already added:
192.168.1.80 homeserver.keiban.com homeserver
Both computers are in a local network and via cable DSL to connect to Internet. Is there some thing I am missing?
Your help will be appreciated,

1. Make sure your FQDN is set up correct on both
client and Server.Victor, you are right! I setup FQDN on server properly, but forgot to have FQDN setup to map FQDN to IP address on client. So the Console goes to Internet to find the directory server in which it causes failure.
Thanks your hint,
a. ping xxx.xxx.xxx.xxx from client to Server
Check the Admin Server for Client Access Control
configuration.
Victor

Unable to open analytics/EM/console(Cannot connect to BI Security Service)

Hi,
After fresh install obiee11.1.1.5.0 1st time i can able to ran presentation services and FMW but after re boot machine i got below kind of error. while checking opmnctl status all serivces are up...
[2012-05-15T01:52:23.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [13037] Cannot connect to BI Security Service, please make sure this is running properly (with SSL or not) in EM.
[2012-05-15T01:52:23.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] nqsserver:     Clustered Oracle BI Server (64-bit) started. Version: 11.1.1.5.0.110427.1127.000.
[2012-05-15T01:52:25.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 161c] [43071] A connection with Cluster Controller W01BGPCBIAPP1A.reg1.uat1bank.dbs.com:9706 was established.
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 15cc] [nQSError: 46066] Operation cancelled.
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 161c] [nQSError: 46066] Operation cancelled.
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [43031] :     Oracle BI Server shutdown.
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [85008] MDX Member Name Cache subsystem statistics - Entries: 0, Sizes: 0 bytes, Overall Queries: 0, Hits: 0(0%), Misses: 0(0%).
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [85007] MDX Member Name Cache subsystem stopped.
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [58001] Query Cache Statistics -- Hits:0(0%), Qualified Misses:0(0%), Unqualified Misses:0(0%).
[2012-05-15T02:10:59.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7dywb3t7Fw00Fzzw0w00000ES000000] [tid: 1790] [14058] Unloaded all subject areas.
[2012-05-15T02:11:23.000+00:00] [OracleBIServerComponent] [WARNING:1] [] [] [ecid: ] [tid: 147c] Warning: Clustering and cache are enabled for this OBIS node, but cluster aware cache is disabled. This can lead to inconsistencies.
[2012-05-15T02:11:32.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [36007] Loading repository D:\Oracle\Middleware\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1\repository\SampleAppLite_BI0001.rpd.
[2012-05-15T02:11:33.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: a74] [14055] Loading subject area: SampleApp Lite ...
[2012-05-15T02:11:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: a74] [14056] Finished loading subject area: SampleApp Lite.
[2012-05-15T02:11:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [58002] Query Cache loaded with 0 entries from saved cache files.
[2012-05-15T02:11:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [85003] MDX Member Name Cache subsystem started successfully.
[2012-05-15T02:11:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [85004] MDX Member Name Cache subsystem recovered entries: 0, size: 0 bytes.
[2012-05-15T02:11:35.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [13026] Error in getting roles from BI Security Service: 'Error Message From BI Security Service: [nQSError: 12002] Socket communication error at call=Connect: (Number=0) Call=NQRpc: An unknown socket communications error has occurred. [[
[nQSError: 12010] Communication error connecting to remote end point: address = 10.10.10.10; port = 9704.
[nQSError: 46119] Failed to open HTTP connection to server 10.10.10.10 at port 9704.'
[2012-05-15T02:11:36.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] [13037] Cannot connect to BI Security Service, please make sure this is running properly (with SSL or not) in EM.
[2012-05-15T02:11:36.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 147c] nqsserver:     Clustered Oracle BI Server (64-bit) started. Version: 11.1.1.5.0.110427.1127.000.
[2012-05-15T02:11:36.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i7e00upPBFw00Fzzw0w00000V^000000] [tid: 190c] [43071] A connection with Cluster Controller W01BGPCBIAPP1A.reg1.uat1bank.dbs.com:9706 was established.
[2012-05-15T02:11:39.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7e01ZlqXFw00Fzzw0w0000184000003] [tid: 1340] Error Message From BI Security Service: [nQSError: 12002] Socket communication error at call=Connect: (Number=0) Call=NQRpc: An unknown socket communications error has occurred. [[
[nQSError: 12010] Communication error connecting to remote end point: address = ; port = 9704.
[nQSError: 46119] Failed to open HTTP connection to server 10.10.10.10 at port 9704.
*[2012-05-15T02:11:39.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7e01ZlqXFw00Fzzw0w0000184000003] [tid: 1340] [nQSError: 13037] Cannot connect to BI Security Service, please make sure this is running properly (with SSL or not) in EM.*
*[2012-05-15T02:11:39.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i7e01ZlqXFw00Fzzw0w0000184000003] [tid: 1340] [nQSError: 13037] Cannot connect to BI Security Service, please make sure this is running properly (with SSL or not) in EM.*
Thanks
Deva

Hi,
While installing Admin Server/Bi_Server i forgot to reset the boot.properties file(encripted password) after re boot i just reset and Restarting the opmn and BI Services its got woking
Thanks
Deva

Exchange active sync cannot connect to server after migration mailbox user from exchange 2007 to exchange 2013 coexistence

Hello, everyone, my name is rafl
I have a problem with exchange 2013 active sync.
I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
(legacy.domain.com)
the process of moving mailboxes successfully without error.
Access OWA for exchange 2007 and exchange 2013 is running normally
access mail from Outlook running normally
Certificate request has been installed and has no problem with it
The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
user mailboxes are still on exchange 2007 is not problematic.
only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
any ideas for this problem, and what should I check on the exchange server ..?

i have run the activesync test connectivity and get some error :
Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 3091 ms.
Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21072 ms.
Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
A network error occurred while communicating with the remote host.
Elapsed Time: 21049 ms.
I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server"

I cannot connect to ITunes after updating to IOS 7.0.2,cannot update my apps nor download new apps. When I tap the quick test for IOS diagnostics it says it cannot verify the ticket number.

After updating to IOS 7.0.2 in my Ipad mini I cannot update my apps nor download new apps . It says "cannot connect to ITunes. " it's been almost 3 wks now. I have tried resetting it and trying other options like changing the DNS to just 8.8.8 etc but to no avail. I try to run the IOS diagnostics but it couldn't verify my ticket number. Everytime I open my mail it cannot identify server identity " Apple.imap.yahoo.com." But I just clicked "continue" anyway so I could get my mail.

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

SCCM 2012 console cannot connect to the site

Last Friday for some unknown reason my SCCM console stopped connecting to the site. Reboots of both site servers (MP and database) did nothing. The error is the same as this picture: http://1.bp.blogspot.com/-q0A5GonM498/UCDkreFxc9I/AAAAAAAAAQk/67AQ5tGW_d4/s1600/SCCM%2BConsole.JPG.
I went home for the weekend and on Monday I was actually able to connect to the site. It would take about an hour, but finally the console would load, with the correct information from the site. If I clicked on a different area in the console it would take
forever (about 20 minutes), but it would finally change to that view as well. In troubleshooting I followed all the steps in the attached article, except rebuilding the MOFs. (http://schadda.blogspot.com/2012/08/how-to-fix-issues-related-with_7.html)
After finding that none of that helped I installed CU4 hoping that would help. It completed, but with errors in building the four packages (console, x86, x64 and server). Now the console goes back to the original error and won't connect at all, including
from the actual server.
I have checked and there does not appear to be any bottleneck between the two servers. Network is as it was previously and I can still telnet to the SQL port (1433) from the Management Point.
Infrastructure:
2 servers, running Server 2012 R2 - one server is running everything except the SQL services; SQL Services are running on the second server
SCCM is at 2012 R2 level (now at CU4, was at CU3 at start of problem)
Thank you in advance for your help.
Über Random

This is last entry in the SMSProv.log file. It doesn't show any errors and it just terminates at the time the problem began for us.
CExtUserContext::EnterThread : User=AD\10594690 Sid=0x010500000000000515000000B928868EB3F3E2C669287431D2390100 Caching IWbemContextPtr=0000008E59884E30 in Process 0x5e8 (1512)
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: SMSAppName=Configuration Manager Administrator console
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: MachineName=D088180D.ad.uvu.edu SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: UserName=AD\10594690 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: ObjectLockContext=1ab442e7-3960-4e44-aa80-87384417fb3e
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: ApplicationName=Microsoft.ConfigurationManagement.exe
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: ApplicationVersion=5.0.7958.1000 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: LocaleID=MS\0x409 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: __ProviderArchitecture=32 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: __RequiredArchitecture=0 (Bool) SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: __ClientPreferredLanguages=en-US,en
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: __CorrelationId={A9D1E6D7-5AA5-0002-759D-DFA9A55AD001}
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Context: __GroupOperationId=770500 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Context: __WBEM_CLIENT_AUTHENTICATION_LEVEL=6
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
CExtUserContext : Set ThreadLocaleID OK to: 1033
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
CSspClassManager::PreCallAction, dbname=CM_UV1
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
ExecMethodAsync : SMS_RbacSecuredObject::UserHasPermissions
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Requested class =SMS_RbacSecuredObject SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
Requested num keys =0 SMS Provider
3/27/2015 1:30:36 PM 12120 (0x2F58)
CExtProviderClassObject::DoExecuteMethod UserHasPermissions
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=1502105136
SMS Provider 3/27/2015 1:30:36 PM
12120 (0x2F58)
Über Random

MY iphone 4s cannot connect to wifi after updating to ios 8.1.1

after updating to ios 8.1.1, my iphone 4s cannot connect to wifi at all.
at first, connection will show up, but when i tried to connect, i will see the wifi logo but after 15 or 30 seconds, connection will be lost again.
i will try again, but this time, my phone will hang, i need to restart but then, wifi will not work at all.
it will show that its searching for network but its not. then it will hang again,
after this, give up already.
my phone is working perfectly fine until updating my ios to 8.1.1.
the problem is i cannot upgrade again as i cannot connect to wifi.

Settings/General/Reset - Reset Network Settings. If you can't turn WiFi on see: http://support.apple.com/kb/TS1559

Cannot connect to database after installing 10g

Hello friends at www.oracle.com ,
after installing Oracle 10g, I am trying to use programs like SQL*Plus or Forms Builder. However, these programs are asking me for the host string, and:
- I cannot simply ignore this question, because I cannot connect without this information.
- But I don't know how I can configure a host string for local access.
- And I don't know if there's already a default host string for me to use after installing Oracle 10g, because I have no practice in database configuration, since I'm a developer.
Please help me.
Best regards,
Franklin Goncalves Jr.

Hi ,
Few pointers which may help you , but a small caveat all instructions pertaining to way we do internally in oracle , so there could be some mismatch at customer end , but more or less logic should be same , in case you can't any step revert back :
1. When Db asks you for connect string essentially it asks for the complete description of the db to connect including :
Db server machine name / ip - that can be resolved from your system if it's a remote server .
Username , Password ,
Db Instance Name - TnsAlias mentioned in TnsNames.ora .
Now there are few Env. variables that you need to set before running / starting an oracle db instance .
1. Oracle_Home - Essentially Oralce Installation directory .
2. Oracle_sid - unique identifier for Oracle Instance .
3. For OracleDb only set T_Work and TNS_ADMIN env. variables as %Oracle_Home%\work directory and place your Listener.ora file in that folder .
4. Make your initial parameter file init<Oracle_Sid>.ora in %Oracle_Home%\database -- default location .
5. Create Oracle Instance specific services to run on a Windows machine , essentially they will be two and default nomenclature is :
Oracle Service - OracleService<Oracle_Sid>
Listener Service - Oracle<oracle_sid>TnsListener
Now in %Oracle_Home%\bin directory you have couple have tools to help you in whole process including lsnrctl.exe , tnsping.exe , sqlplus.exe .
and onec you start oracle instance like this :
SQlPlus "/as sysdba" -- OS Authentication
--- Connected to Idle instance
Sql> startup --> this will take default parameter file
Check out dump location for log and trace files generated if enabled .
Now client setting :
1. This is the place where you need appropriate connect string with all components as mentioned above .
Check out any good site for exact syntax , but you need to make sure regarding client you are using for e.g:
ODP.Net , Java Driver etc .
For Client few important settings :
Execution directory should contain tnsnames.ora
Create T_WORK and TNS_ADMIN for execution directory .
check out for listener connectivity using :
tnsping <TnsAlias>
Imp -- Include all relevant stuff in System PATH for execution from anywhere .
Once it connects tehn you can use appropriate username / password for connecting with appropriate connection string .
Normally while installing oracle you would have set the username and password to be changed later .
or otherwise onec you log in as sysdba, you can create new username/password and give it sysdba permissions .
Also imp. thing for connecting from a remote system is having Sqlnet.ora authentication file in client's T_WORK and TNS_ADMIN .
I hope it helps upto some extent .
regards ,
Mrinal

Console cannot connect to ldap after SSL config

Similar Messages

Maybe you are looking for