Console connection to Windows Console via RDP
RDP 5.2 has the option of connecting to the console of a Windows Terminal Server. Is this also possible from SGD?
There is no option for the console connection for /opt/tarantella/bin/bin/ttatsc
SGD version is 4.2
Thanks in adavance,
Remold Krol
In the article you posted (http://support.microsoft.com/kb/278845/ )
I can read:
MORE INFORMATION
In Windows Server 2003, when you use Terminal Services, you can connect to the console session (session 0), and at the same time, open a shadow session to it (as long as you connect from a session other than the console). With this added functionality, you can log on to a Windows Server 2003-based server that is running Terminal Services remotely and interact with session 0 as if you were sitting at the physical console of the computer. This session can also be shadowed so that the remote user and the local user at the physical console can see and interact with the same session.
if I connect via the command mstsc -v:servername /F -console as you describe, in task manager I see my connection with id 0...
Similar Messages
-
I can't connect to Windows Server via FTP
I've been using FTP for about 13 years and it works fine on Apache servers but can't connect to a windows Server via my Fetch FTP program. The site owner sent me a screenshot and copied/pasted the password so I know I have the info correct. It is still giving me errors.
Is there a special method to connect to Windows server via FTP?Hi Lorel,
Try FileZilla...
https://filezilla-project.org/ -
Palm Pro won't connect to Windows XP via USB
I can't get my Palm Pro to connect to windows XP. When I connect it, via the USB connection, it prompts that it has found new hardware, however the ActiveSync portion fails and nothing happens. I've uninstalled & installed the software twice and even dug into the registery to make sure it was completely cleaned out. Futhermore, it connects to my laptop at home no problems. Firewall is disabled.
Thoughts?
Post relates to: Treo Pro T850 (Sprint)In device manager you do not see any listing for the Palm or Windows Mobile device, but you see the DM jump or blink. When you connect the USB cable, do you get a beep-beep low then high, or a triple gong sound. The triple gong sound would indicate that the connection is established, but the device is not recognized. You may have a driver issue that require a clean uninstall / reinstall. I am guessing that you did try another USB port. Here are the steps for the clean uninstall / reinstall:
Full uninstall of PD on XP:
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to C:\Program Files\Palm or
Palm One. Highlight your Palm Desktop username and right click and copy.
Then go to your PC desktop, right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
For Palm desktop 6.2, look in the following location for the folders and files, my documents, PalmOS desktop. You will find the username folder in this location.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer. Like the above folder, delete the Palm folder. Once this is done, you will need to delete some registry keys
from your PC Operating System registry.
Word of warning, going here and deleting the wrong thing can cause your PC
to not start up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This will show them everything
they need to delete. To retain your current Registry settings, we need to do a backup of the Registry.
On the PC, go to start and run type "regedit" without quotes
Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As
box. Current location is fine should be in My Documents or you can change to a location you will remember. In the file name box, type "Regbackup[todaysdate]" i.e. Regbackup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are
you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer
Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before you create a hotsync name. -
Connecting to Windows Workgroup via Kerberos
How do i connect to windows workgroups using kerberos authentication?
in the finder select "Go" then "Connect to server" and enter "smb://servername/sharename"
kerberos is an authentication scheme, not a protocol. In order for it to work (when it's not broken), you need to be logged in with kerberos credentials. -
ORA-03135 connecting with Windows 7 via VPN
Can you please help me.
I am unable to connect with Windows 7 clients (x32 also x64) to a database 10.2.0.5 running on a Windows 2008 R2 x64 Server
Oracle Client Version: 10.2.0.3
always raises an ORA-03135 error!!!
But with a Windows XP Clients (same Oracle Client Settings) its working without problems. No connections problems!
We use a SonicWall Firewall where all Traffic (SQLNET,..) is allowed for testing!
CLIENT: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
SERVER: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
Some Trace Infos:
Oracle Client:
(1256) [25-NOV-2010 11:23:38:997] ntt2err: entry
(1256) [25-NOV-2010 11:23:38:997] ntt2err: soc 1992 error - operation=5, ntresnt[0]=517, ntresnt[1]=54, ntresnt[2]=0
(1256) [25-NOV-2010 11:23:38:997] ntt2err: exit
(1256) [25-NOV-2010 11:23:38:997] nttrd: exit
(1256) [25-NOV-2010 11:23:38:997] nsprecv: error exit
(1256) [25-NOV-2010 11:23:38:997] nserror: entry
(1256) [25-NOV-2010 11:23:38:997] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=54, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
(1256) [25-NOV-2010 11:23:38:997] nsrdr: error exit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: nsctxrnk=0
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: error exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: wanted 1 got 0, type 0
(1256) [25-NOV-2010 11:23:38:998] nioqper: error from nioqrc
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns main err code: 12547
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns (2) err code: 12560
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt main err code: 517
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt (2) err code: 54
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt OS err code: 0
(1256) [25-NOV-2010 11:23:38:998] nioqer: entry
(1256) [25-NOV-2010 11:23:38:998] nioqer: incoming err = 12151
(1256) [25-NOV-2010 11:23:38:998] nioqce: entry
(1256) [25-NOV-2010 11:23:38:998] nioqce: exit
(1256) [25-NOV-2010 11:23:38:998] nioqer: returning err = 3135
(1256) [25-NOV-2010 11:23:38:998] nioqer: exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: exit
(1256) [25-NOV-2010 11:23:38:998] nioqds: entry
(1256) [25-NOV-2010 11:23:38:998] nioqds: disconnecting...
(1256) [25-NOV-2010 11:23:38:999] nsclose: entry
Server Traces:
nttrd: socket 4172 had bytes read=0
nttrd: exit
nsprecv: error exit
nserror: entry
nserror: nsres: id=0, op=68, ns=12535, ns2=12560; nt[0]=505, nt[1]=60, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsrdr: error exit
nsdo: nsctxrnk=0
nsdo: error exit
nioqrc: wanted 1 got 0, type 0
nioqper: error from nioqrc
nioqper: ns main err code: 12535
nioqper: ns (2) err code: 12560
nioqper: nt main err code: 505
nioqper: nt (2) err code: 60
nioqper: nt OS err code: 0
nioqer: entry
nioqer: incoming err = 12151
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
Thxalways raises an ORA-03135 error!!!
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
ThxThis is network related problem,may be network very slow.When error occur then execute tnsping <netservicename> command and see that happen. -
Connecting to Windows Computer via wireless network (Password issue)
I have a wireless network set up at my house, and we all can see each other's shared computers, and the windows machines can connect to each other without a problem.. but my Mac cannot connect to them, but they can connect to me. When I goto "Connect to Server" it asks me for a username and password for the windows machine.. I don't know what to do from here!!! Please help, thanks a bunch
In your Sharing panel, did you go into "Options" and check the box for sharing via SMB?
Then from XP you should be able to reach the Mac via //(ip# or DNS name)/
and you should see the available shares. -
Can't connect to windows xp via server name
I have a network via Airport Express: imac 10.6.8 and PC windows XP sp3
Suddenly, without any reason, I got this issue:
I can't see the PC in on left share bar of Finder windows.
The only way to see the PC is : go > connect to server" > server address = smb://ip address BUT doesn't work if I use the computer name instead of the ip address( i.e ".smb://ip-address" works fine BUT "smb://computer-name" doens't work : message "connection failed")
Sometimes , very rerely, the XP computer name appears on the share bar but again, if I try to connect I get "connection failed " message.
It seems that iMac is not able to translate the logical computer name with the ip address.
Due to this issue , I have a trouble to use the shared windows printer because I have to install (on the mac) the windows printer using the ip address of the PC but if the IP address changes (I use DHCP and sometimes I have other computers on the network so the IP addres may change) I have to install again the printer with the new IP address.
Can someone help me?
Many thanks
GiuseppeSame problem - can't see the Apple TV on iTunes to be able to connect despite changing the TCP address etc
-
How connect to windows network via wifi?
i try to connect to my windows shared network via wifi,but it doesn't work.
here's the error message
please help me to solve this problem
thank you.Check the settings on your iPad for automatic downloads.....
Settings>Store>Automatic Downloads>Apps. If it is enabled, turn it off. The apps shouldn't download again as far as I know, but this is a good a place as any to start. -
58" Cloud TV...can no longer connect to Windows computer via MediaShare
Have a Dell all in one and 58" Toshiba Cloud TV. Love the TV, but have had nothing but trouble with the MediaShare function. Sometimes it finds the computer on my network, sometimes not. Now won't at all for the last week. Have tried rebooting computer, TV, and wireless router. No effect. Dell is running Windows 8.1 and has file sharing and network discovery turned on.
mcafee is a horrible piece of software along with norton the only reason they have tons of users is because they pay pc makers to preinstall it and most nonTech users just pay up after the 30days of free virus scanning
-
TS only allows 1 user at a time to connect via RDP
Windows 2008 Standard (32 bit, not R2) Terminal Server has 10 licenses installed, licensing server is activated, but it only allows 1 remote user to connect at a time via RDP. When a user is already connected, subsequent users get a
message saying the server cannot be found.Hi,
On the Server, please open Terminal Services Configuration (tsconfig.msc), and double-click RDP-Tcp. On the Network Adapter tab please make sure Unlimited connections is selected. Also in tsconfig, please make sure that the Licensing mode is
set to match the type of TS CALs you own, and that License server discovery mode is set to Use the specified license servers and you have your TS Licensing server's name listed.
Thanks.
-TP -
X201 thinkpad won't connect with windows updates
hello,
my 6-month-old lenovo thinkpad x201 will not connect with windows updates via firefox 3.6.13 or internet explorer 7.
Machine model # CTO; Machine type # 3249 Windows XP Pro, Service Pack 3 .
i would appreciate assistance.
thanks.how about updating to internet explorer 8?
or firefox 4?
getting microsoft updates will probably work better with internet explorer 8 though?
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Server 2012 not accepting inputs either via console or RDP
Hello Experts,
I have a server 2012 standard running in a physical box with 3 virtual machines running in hyper-v session. For sometime now, i have been running into strange issues where it does not accept input. I tried via RDP, console; neither method worked. It still
holds AD and file server role. It was all working good and driving me into issues for some time now.
It does not accept inputs via keyboard or mouse either from console or RDP. All resources such as file share, virtual machine are accessible from network. I can logon to server via console or RDP for 3 to 5 min right after server has been hard restarted
and again it stops accepting inputs.
Can someone help me out work around this issue as i am new to server 2012 and not sure what goes in error.
Thanks.Hi koneska,
Did you install any software recently? Please try to unistall the new installed software and if you have AV soft disable the AV soft then try again.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Connect via RDP option is not enabled for some VM's on the same Hyper-V Host
Hi. I have many virtual machines on a Hyper-V host being managed via System Center Virtual Machine Manager 2012. When you right click on a virtual machine - Connect or View - Connect via Console is enabled, but Connect via RDP is not enabled for
most but not all of the machines. Is there a setting on the Hyper-V host that I need to modify to enable Connect via RDP for all of my VM's? All of the virtual machines have the same configuration meaning that Remote Desktop is enabled for all
of them on the OS itself.Hi Debabrata,
In App Controller the console access is provided by an ActiveX control and this requires the client (web browser) to connect directly to the Hyper-V server. As you note, for this to work over the internet would require the Hyper-V host to be accessible from
the internet, and this is not a recommended security practice.
Publishing App Controller as a Remote App avoids needing to make the Hyper-V host accessible to the internet. I'm not an expert in setting up Remote App and don't have an answer about how to avoid doing 2 lots of authentication. The
Remote Desktop Services forum is likely to be a better place to ask a question on setting up Remote Apps.
Let me know what you need help with for the Remote Console in Windows Azure Pack option. There is also a forum for
Azure Pack and two of our MVPs who do have console connect working have both written articles that describe their experience.
http://kristiannese.blogspot.com/2014/02/configuring-remote-console-for-windows.html
http://www.hyper-v.nu/archives/mvaneijk/2014/01/windows-azure-pack-remote-console-with-the-rd-gateway-in-a-dmz/
Regards,
Richard
This posting is provided "AS IS" with no warranties, and confers no rights. -
Unable to access a windows 7 Workstation via RDP
Hi,
I have a windows 7 Pro SP1 workstation that I’m unable to access from any other machine via RDP...
This is a domain environment.
The machine in question is 100% up to date. (WSUS)
It's running an up-to-date anti-virus solution and has been scanned. (Panda cloud) (No firewall)
This is on a local network, no router involved.
Can ping the machine, can see network shares.
Checked that it's listening on the correct port.
Necessary services are running and are starting correctly.
Configured RDP correctly and tried different configurations (with and without NLA and adding/removing users)
This machine seems to be able to RDP into other machines, it just wont accept any sessions.
Assigning the necessary exclusions in firewall - no effect
Firewall is disabled by GPO and I have stopped the service - no effect.
Deleted the computer certificate - no effect.
uninstalled the RDP 8 update - no effect
Tried using both the IP and hostname - no difference
I'm completely out of ideas, no other machine I tested with is having this issue and all the domain machines are running same AV and same GPO's are applied.
Re-installation is not an option.
Below is the error - very unhelpful.
Kind Regards,
StephenHi Hinte,
Here are the results:
Here is the netstat result - can't see 3389 anywhere:
Active Connections
Proto Local Address Foreign Address State PID
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING 1060
RpcSs
[svchost.exe]
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING 4
Can not obtain ownership information
TCP 0.0.0.0:623 0.0.0.0:0 LISTENING 4124
[LMS.exe]
TCP 0.0.0.0:16992 0.0.0.0:0 LISTENING 4124
[LMS.exe]
TCP 0.0.0.0:18226 0.0.0.0:0 LISTENING 2476
[WAHost.exe]
TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING 532
[wininit.exe]
TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING 1140
eventlog
[svchost.exe]
TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING 1292
Schedule
[svchost.exe]
TCP 0.0.0.0:49185 0.0.0.0:0 LISTENING 624
[lsass.exe]
TCP 0.0.0.0:49187 0.0.0.0:0 LISTENING 600
[services.exe]
TCP 0.0.0.0:49192 0.0.0.0:0 LISTENING 3268
PolicyAgent
[svchost.exe]
TCP 127.0.0.1:5939 0.0.0.0:0 LISTENING 2360
[TeamViewer_Service.exe]
TCP 127.0.0.1:5939 127.0.0.1:49206 ESTABLISHED 2360
[TeamViewer_Service.exe]
TCP 127.0.0.1:5939 127.0.0.1:49234 ESTABLISHED 2360
[TeamViewer_Service.exe]
TCP 127.0.0.1:49204 127.0.0.1:49205 ESTABLISHED 3856
[TeamViewer_Desktop.exe]
TCP 127.0.0.1:49205 127.0.0.1:49204 ESTABLISHED 3856
[TeamViewer_Desktop.exe]
TCP 127.0.0.1:49206 127.0.0.1:5939 ESTABLISHED 3856
[TeamViewer_Desktop.exe]
TCP 127.0.0.1:49232 127.0.0.1:49233 ESTABLISHED 2660
[TeamViewer.exe]
TCP 127.0.0.1:49233 127.0.0.1:49232 ESTABLISHED 2660
[TeamViewer.exe]
TCP 127.0.0.1:49234 127.0.0.1:5939 ESTABLISHED 2660
[TeamViewer.exe]
TCP 127.0.0.1:49241 0.0.0.0:0 LISTENING 4552
[UNS.exe]
TCP 192.168.100.22:139 0.0.0.0:0 LISTENING 4
Can not obtain ownership information
TCP 192.168.100.22:49201 92.51.156.72:443 ESTABLISHED 2360
[TeamViewer_Service.exe]
TCP 192.168.100.22:49203 197.85.190.46:443 ESTABLISHED 2360
[TeamViewer_Service.exe]
TCP 192.168.100.22:49211 192.168.100.5:445 ESTABLISHED 4
Can not obtain ownership information
TCP 192.168.100.22:49231 192.168.100.5:49159 ESTABLISHED 1732
[spoolsv.exe]
TCP [::]:135 [::]:0 LISTENING
1060
RpcSs
[svchost.exe]
TCP [::]:445 [::]:0 LISTENING
4
Can not obtain ownership information
TCP [::]:623 [::]:0 LISTENING
4124
[LMS.exe]
TCP [::]:16992 [::]:0 LISTENING
4124
[LMS.exe]
TCP [::]:49152 [::]:0 LISTENING
532
[wininit.exe]
TCP [::]:49153 [::]:0 LISTENING
1140
eventlog
[svchost.exe]
TCP [::]:49154 [::]:0 LISTENING
1292
Schedule
[svchost.exe]
TCP [::]:49185 [::]:0 LISTENING
624
[lsass.exe]
TCP [::]:49187 [::]:0 LISTENING
600
[services.exe]
TCP [::]:49192 [::]:0 LISTENING
3268
PolicyAgent
[svchost.exe]
TCP [::1]:49179 [::]:0 LISTENING 2008
[jhi_service.exe]
TCP [::1]:49237 [::1]:49239 ESTABLISHED 4124
[LMS.exe]
TCP [::1]:49239 [::1]:49237 ESTABLISHED 4124
[LMS.exe]
UDP 0.0.0.0:123 *:*
1256
W32Time
[svchost.exe]
UDP 0.0.0.0:500 *:*
1292
IKEEXT
[svchost.exe]
UDP 0.0.0.0:4500 *:*
1292
IKEEXT
[svchost.exe]
UDP 0.0.0.0:5355 *:*
1540
Dnscache
[svchost.exe]
UDP 0.0.0.0:21226 *:*
2476
[WAHost.exe]
UDP 127.0.0.1:50083 *:*
1400
gpsvc
[svchost.exe]
UDP 127.0.0.1:55096 *:*
624
[lsass.exe]
UDP 127.0.0.1:60632 *:*
1540
NlaSvc
[svchost.exe]
UDP 127.0.0.1:64416 *:*
4416
[IntelSmallBusinessAdvantage.exe]
UDP 192.168.100.22:137 *:*
4
Can not obtain ownership information
UDP 192.168.100.22:138 *:*
4
Can not obtain ownership information
UDP [::]:123 *:*
1256
W32Time
[svchost.exe]
UDP [::]:500 *:*
1292
IKEEXT
[svchost.exe]
UDP [::]:4500 *:*
1292
IKEEXT
[svchost.exe]
UDP [::]:5355 *:*
1540
Dnscache
[svchost.exe]
UDP [fe80::3447:c85a:1d2d:4ff9%11]:546 *:*
1140
Dhcp
[svchost.exe] -
Dymo Labelwriter printers not working via Mac Remote Desktop connection into Windows Server 2008
I'm having a really hard time getting Dymo labelwriters (models 335 turbo and 450 turbo) to work over a remote desktop connection and I'd appreciate any help you can offer.
To briefly describe the situation, I'm working for a Doctor's office, moving their IT from a remotely-hosted environment where employees connect to their Windows Server 2008 virtual machines (hosted off-site) via Windows 7 machines through Microsoft's remote
desktop software.
The new setup will have new servers running in-house instead of remotely and will be based on Apple's Mac Mini machines running Windows 7 for some tasks through Parallels virtualization
software running directly on each employee's Mac Mini.
We have 3 of the Dymo 450 Turbo products and one 330 Turbo, each connected directly to a Mac Mini.
Here's the problem: I have Microsoft's Remote Desktop software running on the Macs natively, connected to each employee's virtual machine on the remote server for now, until the time comes to make the switch to using the new in-house server. The remote desktop
software works fine - employees are able to connect successfully and access their desktops fine. I have the "Forward Printing Devices" option checked in the Microsoft Remote Desktop app so that the hosted virtual desktops can see the local labelwriters.
However, the Dymo Label software running on the remote server will not recognize that a labelwriter is present.
If I go to the Printers and Devices window on the remote server, the labelwriter shows up fine, named "dymo labelwriter 450 turbo (redirected 10)" however running the Dymo Label software gives an error, "Dymo label says no printer connected:
dymo label printer requires a dymo label printer be installed and connected ..."
To try and narrow down the cause of the problem, on the same Mac, I ran Windows 7 via Parallels and set up a new remote desktop connection within that Windows VM. Just to be clear, instead of using the RDC software running in the Mac OS, this new connection
is using a Windows virtual machine running on the same Mac, with the RDC being established from within that Windows VM. Again, I forward printing devices and the labelwriter shows up in Printers and Devices on the remote server as "dymo labelwriter 450
turbo (redirected 10)" This time, the Dymo Label software recognizes the attached labelwriter and runs fine.
I'd appreciate any advice you can give on why, as far as the remote server is concerned, a forwarded labelwriter from Microsoft remote desktop running natively on a Mac isn't recognized
but it is if forwarded from within Windows, bearing in mind that the labelwriter shows up on the remote server in both instances and is called the same name in devices and printers.
Sorry for the long-winded question. I hope you can help me.Hi,
Thank you for posting in Windows Server Forum.
Firstly please check whether you have driver capable for your printer with MAC MRD. Also I would like you to check with updated MRD version 8.0.9 for MAC OSX.
https://itunes.apple.com/in/app/microsoft-remote-desktop/id715768417?mt=12
Because as you have commented it can work with windows RDP, so please also try to contact Dymo Labelwriter printer and inquire regarding the issue.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Maybe you are looking for
-
How to delete a table row in the context?
Hi, I've got a table in my context that I access with <TABLE-NAME>-<TABLE-COLUMN>[index]. For example <TABLE-NAME>-<TABLE-COLUMN>.dim delivers the amount of entries in this table. Now I want to delete a specific row in this table without any ABAP-cod
-
InDesign 2014 files don't save in the same location as the original file
The behavior in InDesign CC was to automatically save the file in the same location. I understand this is a new version, and saving my InDesign 2014 files should open a save dialogue. But I don't understand why InDesign seems unaware of the file's lo
-
Sound quality from nano(2nd generation)
Please can someone help, in the last few days when i go to listen to my ipod either via earphones or dock the sound for all the world is like its underwater bubbly sound, i have tried everything and just wondered is there a way to fix this or do i ne
-
How do I get my phone out of recovery mode without restoring the phone?
My phone is stuck in recovery mode and I cannopt restore it because my info is not backed up. How do I fix this?
-
End transaction without saving it
Hi All A. Is there any possible with a button standard sap, to get out from a document transaction without saving it? after confirm account? (i am not working with IVR) B. Is there any possible to get out from document transaction without saving the